This study presents a new, simple method for reducing the back-lobe radiation of a microstrip antenna (MSA) by a partially removed ground plane of the antenna. The effect of the partial ground plane removal in differe...This study presents a new, simple method for reducing the back-lobe radiation of a microstrip antenna (MSA) by a partially removed ground plane of the antenna. The effect of the partial ground plane removal in different configurations on the radiation characteristics of a MSA are investigated numerically. The partial ground plane removal reduces the backlobe radiation of the MSA by suppressing the surface wave diffraction from the edges of the antenna ground plane. For further improving the front-to-back (F/B) ratio of the MSA, a new soft-surface configuration consisting of an array of stand-up split ring resonators (SRRs) are placed on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 9.7 dB has been achieved experimentally for our proposed MSA.展开更多
This paper presents an application of stitched ground plane for microstrip patch antenna design. In this work Matlab interface to computer embroidery techniques were used to implement the felt and denim substrates on ...This paper presents an application of stitched ground plane for microstrip patch antenna design. In this work Matlab interface to computer embroidery techniques were used to implement the felt and denim substrates on microstrip patch antenna. These antennas were simulated using a commercial full 3D electromagnetic CST Microwave Studio 2019. A method to optimize the stitch patterns with conductive thread for antenna ground plane for 2.45 GHz industrial, scientific, and medical (ISM) band and 5 GHz wearable wireless local area networks (WLAN) frequencies was achieved. Rigid and flexible wearable antennas (microstrip patch antennas) were fabricated using the stitched ground plane. The electrical resistance was reduced between the meshes during the stitching design process. Results in terms of bandwidth, radiation patterns and reflection coefficients (S<sub>11</sub>) are presented.展开更多
A new photonic bandgap (PBG) cover for a patch antenna with a photonic bandgap substrate is introduced. The plane wave expansion method and the FDTD method were used to calculate such an antenna system. Numerical re-s...A new photonic bandgap (PBG) cover for a patch antenna with a photonic bandgap substrate is introduced. The plane wave expansion method and the FDTD method were used to calculate such an antenna system. Numerical re-sults for the input return loss, radiation pattern, surface wave, and the directivity of the antennas are presented. A com-parison between the conventional patch antenna and the new PBG antenna is given. It is shown that the new PBG cover is very efficient for improving the radiation directivity. The physical reasons for the improvement are also given.展开更多
A metamaterial was introduced into the cover of a patch antenna and its band structure was analyzed. The metama- terial cover with correct selection of the working frequency increases by 9.14 dB the patch antenna’s d...A metamaterial was introduced into the cover of a patch antenna and its band structure was analyzed. The metama- terial cover with correct selection of the working frequency increases by 9.14 dB the patch antenna’s directivity. The mechanism of metamaterial cover is completely different from that of a photonic bandgap cover. The mechanism of the metamaterial cover, the number of the cover’s layers, and the distance between the layers, were analyzed in detail. The results showed that the metamaterial cover, which works like a lens, could effectively improve the patch antenna’s directivity. The physical reasons for the improvement are also given.展开更多
A kind of novel multi-frequency monopole antenna with sector-nested fractal is proposed and designed, which is nested with a series of similar circular sector elements. By means of the trapeziform ground plane with th...A kind of novel multi-frequency monopole antenna with sector-nested fractal is proposed and designed, which is nested with a series of similar circular sector elements. By means of the trapeziform ground plane with the tapered CPW (coplanar waveguide) feeder in the middle, the antenna’s radiation performance is greatly improved. The antennas can synchronously operate in three frequencies, covering the working frequency bands of WLAN/WiMAX, 2.44 GHz/3.5 GHz/5.2 GHz - 5.8 GHz. The pattern and impedance measurements of antenna show a good performance over the WLAN/WiMAX band;it possesses a near omni-directional characteristic and good radiation efficiency. Moreover, the antenna is miniature and its design idea can be easily applied into other types of nested structure, the features of which make the proposed antenna have a promising application in other fields.展开更多
Ultra-wideband (UWB) is one of the recent topics that received a great concern from academia and industry. However, UWB found many difficulties to be standardized due to the overlay working that made UWB an important ...Ultra-wideband (UWB) is one of the recent topics that received a great concern from academia and industry. However, UWB found many difficulties to be standardized due to the overlay working that made UWB an important potential interference source to many licensed and unlicensed spectrum throughout the band 3.1 to 10.6 GHz. This paper demonstrates the design of integrated triple band notched for UWB Microstrip antenna. We simulated UWB short range systems which require low power and these are built using inexpensive digital components. We proposed a compact triple band notched CPW (Co-planar Waveguide) fed Micro strip Antenna (MSA) for UWB. This band-notched antenna has rejection characteristics at 3.2 GHz (for Wi-MAX band 3.16 to 3.32 GHz), at 5.5 GHz (for WLAN 2 band—5.3 to 5.72 GHz) and at 7.9 GHz (for ITU band 7.72 GHz to 8.13 GHz). The simulation was done using IE3D simulator.展开更多
文摘This study presents a new, simple method for reducing the back-lobe radiation of a microstrip antenna (MSA) by a partially removed ground plane of the antenna. The effect of the partial ground plane removal in different configurations on the radiation characteristics of a MSA are investigated numerically. The partial ground plane removal reduces the backlobe radiation of the MSA by suppressing the surface wave diffraction from the edges of the antenna ground plane. For further improving the front-to-back (F/B) ratio of the MSA, a new soft-surface configuration consisting of an array of stand-up split ring resonators (SRRs) are placed on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 9.7 dB has been achieved experimentally for our proposed MSA.
文摘This paper presents an application of stitched ground plane for microstrip patch antenna design. In this work Matlab interface to computer embroidery techniques were used to implement the felt and denim substrates on microstrip patch antenna. These antennas were simulated using a commercial full 3D electromagnetic CST Microwave Studio 2019. A method to optimize the stitch patterns with conductive thread for antenna ground plane for 2.45 GHz industrial, scientific, and medical (ISM) band and 5 GHz wearable wireless local area networks (WLAN) frequencies was achieved. Rigid and flexible wearable antennas (microstrip patch antennas) were fabricated using the stitched ground plane. The electrical resistance was reduced between the meshes during the stitching design process. Results in terms of bandwidth, radiation patterns and reflection coefficients (S<sub>11</sub>) are presented.
文摘A new photonic bandgap (PBG) cover for a patch antenna with a photonic bandgap substrate is introduced. The plane wave expansion method and the FDTD method were used to calculate such an antenna system. Numerical re-sults for the input return loss, radiation pattern, surface wave, and the directivity of the antennas are presented. A com-parison between the conventional patch antenna and the new PBG antenna is given. It is shown that the new PBG cover is very efficient for improving the radiation directivity. The physical reasons for the improvement are also given.
基金Project (No. 2004CB719802) supported by the National Basic Research Program (973) of China
文摘A metamaterial was introduced into the cover of a patch antenna and its band structure was analyzed. The metama- terial cover with correct selection of the working frequency increases by 9.14 dB the patch antenna’s directivity. The mechanism of metamaterial cover is completely different from that of a photonic bandgap cover. The mechanism of the metamaterial cover, the number of the cover’s layers, and the distance between the layers, were analyzed in detail. The results showed that the metamaterial cover, which works like a lens, could effectively improve the patch antenna’s directivity. The physical reasons for the improvement are also given.
文摘A kind of novel multi-frequency monopole antenna with sector-nested fractal is proposed and designed, which is nested with a series of similar circular sector elements. By means of the trapeziform ground plane with the tapered CPW (coplanar waveguide) feeder in the middle, the antenna’s radiation performance is greatly improved. The antennas can synchronously operate in three frequencies, covering the working frequency bands of WLAN/WiMAX, 2.44 GHz/3.5 GHz/5.2 GHz - 5.8 GHz. The pattern and impedance measurements of antenna show a good performance over the WLAN/WiMAX band;it possesses a near omni-directional characteristic and good radiation efficiency. Moreover, the antenna is miniature and its design idea can be easily applied into other types of nested structure, the features of which make the proposed antenna have a promising application in other fields.
文摘Ultra-wideband (UWB) is one of the recent topics that received a great concern from academia and industry. However, UWB found many difficulties to be standardized due to the overlay working that made UWB an important potential interference source to many licensed and unlicensed spectrum throughout the band 3.1 to 10.6 GHz. This paper demonstrates the design of integrated triple band notched for UWB Microstrip antenna. We simulated UWB short range systems which require low power and these are built using inexpensive digital components. We proposed a compact triple band notched CPW (Co-planar Waveguide) fed Micro strip Antenna (MSA) for UWB. This band-notched antenna has rejection characteristics at 3.2 GHz (for Wi-MAX band 3.16 to 3.32 GHz), at 5.5 GHz (for WLAN 2 band—5.3 to 5.72 GHz) and at 7.9 GHz (for ITU band 7.72 GHz to 8.13 GHz). The simulation was done using IE3D simulator.
