Based on analyzing the traditional process to manufacture fin heat sinks(FHS) ,the production of FHS by the planing process was proposed ,the mechanism of the fins curl was investigated and the fins surface finish was...Based on analyzing the traditional process to manufacture fin heat sinks(FHS) ,the production of FHS by the planing process was proposed ,the mechanism of the fins curl was investigated and the fins surface finish was analyzed . Through controlling chip curl based on the continuous strip chips ,flat straight fins were processed . Compared with the traditional processes ,this process makes full use of material and the processed FHS has better heat transfer capacity ,higher heat transfer efficiency and more reliability . The tool geometrical parameters and pro- cessing performance affect the fins curl . The opti mumprocessing parameters are :a cutter edge inclination angle of 0°,a rake angle between 50°and 55°,and a planing depth from 0 .2 mmto 0 .3 mm. The planing speed has little effect on the fins curl .展开更多
为研究小水线面双体船(small water-plane area twin hull,SWATH)的耐波性,在拖曳水池里开展了SWATH顶浪规则波中纵向运动模型试验,研究了航速和稳定鳍纵向位置变化对船体纵向运动性能的影响,以及波高变化对船体运动响应的非线性影响。...为研究小水线面双体船(small water-plane area twin hull,SWATH)的耐波性,在拖曳水池里开展了SWATH顶浪规则波中纵向运动模型试验,研究了航速和稳定鳍纵向位置变化对船体纵向运动性能的影响,以及波高变化对船体运动响应的非线性影响。试验结果表明:不同航速下,船体的垂荡传递函数和纵摇传递函数均随着波长变化呈现出双极值;不同航速时的垂荡传递函数的极值大小变化较小。稳定鳍纵向位置移动3.5%设计水线长时,对模型的运动响应影响不明显。随着波高增加,模型运动响应的非线性特征突出表现在共振区附近,在低速时更为显著。展开更多
基金Projects(50436010 50375055 +1 种基金 50175028) supported by the National Natural Science Foundation of China Project(04105942) supported by the Natural Science Foundation of Guangdong Province , China
文摘Based on analyzing the traditional process to manufacture fin heat sinks(FHS) ,the production of FHS by the planing process was proposed ,the mechanism of the fins curl was investigated and the fins surface finish was analyzed . Through controlling chip curl based on the continuous strip chips ,flat straight fins were processed . Compared with the traditional processes ,this process makes full use of material and the processed FHS has better heat transfer capacity ,higher heat transfer efficiency and more reliability . The tool geometrical parameters and pro- cessing performance affect the fins curl . The opti mumprocessing parameters are :a cutter edge inclination angle of 0°,a rake angle between 50°and 55°,and a planing depth from 0 .2 mmto 0 .3 mm. The planing speed has little effect on the fins curl .
文摘为研究小水线面双体船(small water-plane area twin hull,SWATH)的耐波性,在拖曳水池里开展了SWATH顶浪规则波中纵向运动模型试验,研究了航速和稳定鳍纵向位置变化对船体纵向运动性能的影响,以及波高变化对船体运动响应的非线性影响。试验结果表明:不同航速下,船体的垂荡传递函数和纵摇传递函数均随着波长变化呈现出双极值;不同航速时的垂荡传递函数的极值大小变化较小。稳定鳍纵向位置移动3.5%设计水线长时,对模型的运动响应影响不明显。随着波高增加,模型运动响应的非线性特征突出表现在共振区附近,在低速时更为显著。
