Effects of planting methods on yield and quality of different types of japonica rice in northern Jiangsu plain, China

Mechanical transplanting with carpet seedlings(MC) and mechanical direct seeding(MD) are newly developed planting methods, which increase in popularity and planted area each year. Knowing the difference for yield and rice quality under different planting methods is of great importance for the development of high quality and yield cultivation techniques under mechanical conditions. Therefore, three kinds of japonica rice including hybrid japonica rice, inbreed japonica rice, and soft rice were adopted as materials. And the differences in the quality of processing, appearance, cooking and eating quality, nutrition, and the rapid viscosity analyzer(RVA) profile were studied to reveal the effects of planting methods on yield and quality of different types of japonica rice. Results showed that the milled rice and head rice rates under MC was significantly higher than those under MD, and the processing quality of inbreed japonica rice was the most stable. Compared with MC, length/width ratio of rice under MD was significantly increased, and chalkiness rate, size, and degree were significantly decreased. The protein content under MD was lower than that under MC. MC showed higher peak viscosity and breakdown value than MD. The taste value was the greatest for soft rice, followed by inbreed japonica rice, and then by japonica hybrid rice, with no significant differences resulting from planting methods. Compared with MC, MD significantly improved the appearance quality, though processing quality and nutritional quality were decreased. And there was no significant difference in cooking and eating quality between MC and MD. Under different planting methods, the appearance quality of inbreed japonica rice changed the most and the processing quality was the most stable. The nutritional, cooking and eating quality of soft rice changed the least. Therefore, according to the different planting methods and market needs, selecting the appropriate rice varieties can reduce the risks in rice production and achieve good rice quality.

Comparison of yield traits in rice among three mechanized planting methods in a rice-wheat rotation system

Understanding the differences in yield traits of rice among pothole seedling of mechanical transplanting （PSMT）, carpet seedling of mechanical transplanting （CSMT） and mechanical direct seeding （MDS） is of great importance not only for rice scientists but also for rice farmers to develop a high-yield production system under mechanical conditions in a rice-wheat rotation system. However, such traits are yet to be studied among rice varieties ofjaponica-indica hybrid rice （JIHR）,japonica conventional rice （JCR） and indica hybrid rice （IHR）. Field experiments were conducted in 2014 and 2015, where six cultivars of the three rice types JIHR, JCR and IHR were grown individually with PSMT, CSMT and MDS methods, under respective managements for each method to achieve the maximum attainable yield. Results showed that （i） the PSMT significantly increased grain yield of JIHR by 22.0 and 7.1%, of JCR by 15.6 and 3.7% and of I HR by 22.5 and 7.4%, compared to MDS and CSMT on average across the two years, respectively. The highest yield was produced by the combination of JIHR and PSMT; （ii） high yield under PSMT was mainly attributed to large sink capacity and high-efficient dry matter accumulation. With sufficient panicles per hectare, the increase of spikelet number per panicle, especially the increase in spikelet number of the secondary rachis-branches was determined to be the optimal approach for developing a large sink capacity for rice under PSMT. The optimal tillers development, large leaf area index at heading stage, and high leaf area duration, crop growth rate and net assimilation rate during grain-filling phase could be the cause of sufficient dry matter accumulation for rice under PSMT; （iii） moreover, the PSMT favored plant growth as well as enriched the stems plus sheaths during grain-filling phase, as compared with CSMT and MDS. These results suggest that PSMT may be an alternative approach to increasing grain yield in a rice-wheat rotation system in the lower reaches of the Yangtze River in China.

Temperature and solar radiation utilization of rice for yield formation with different mechanized planting methods in the lower reaches of the Yangtze River,China

Several studies have demonstrated the effect of planting methods on rice yield, but information on the climate resources is limited. This study aims to reveal the effects of planting methods on climate resources associated with rice yield in a rice-wheat rotation system in the lower reaches of the Yangtze River, China. Field experiments were conducted in 2014 and 2015 with two japonica, two indica hybrid, and two japonica-indica hybrid varieties grown under three mechanized planting methods： carpet seedling of mechanical transplanting（CT）, mechanical direct seeding（DS）, and pot-hole seedling of mechanical transplanting（PT）. The rice yield and total dry matter under PT were greater than those under CT and DS methods. Besides, the entire growth duration and daily production showed significant positive relations with rice yield. Compared with CT and DS, the effective accumulated temperature and cumulative solar radiation of rice under PT were higher in phenological phases. In addition, the dry matter/effective accumulated temperature and solar energy utilization of rice under CT and DS were higher during vegetative phase and lower during reproductive and grain filling phases in contrast to PT. The mean daily temperature and mean daily solar radiation in the entire growth duration showed significant positive correlation with rice yield, total dry matter, and harvest index. This study demonstrated that when the mean daily temperature is 〈25.1°C in vegetative phase and 〉20.1°C in grain filling phase, rice yield could be increased by selecting mechanized planting methods. Most varieties under PT method exhibited high yield and climate resources use efficiency compared with CT and DS. In conclusion, the PT method could be a better cultivation measure for high rice yield, accompanied with high temperature and solar radiation use efficiency in a rice-wheat rotation system in the lower reaches of the Yangtze River, China.

Development of 2BZJ-3/4 Precision Planter for Soybean Narrow-row flatdense Planting Method

Based on the study on cultivation models of soybean narrow-row-flat-dense planting under the conditions of different between-row spacing and inter-plant spacing by using the comparison field experiment, and technical studies of the contour following the seeder unit, the anti-block, the lateral and stratified the deep fertilizing, according to the design ideas of planting units integration and variable between-row spacing from 30 to 45 cm, the 2BZJ-3/4 precision planter matched with 18-32 hp tractors has been developed for the popularization of the narrow-row-flat-dense planting soybean technique by means of Virtual Prototyping （VP） technology.

Effects of Planting Methods on Root Yield and Nutrient Removal of Five Cassava Cultivars Planted in Late Rainy Season in Northeastern Thailand

The objectives of this study were to evaluate growth, yield and nutrients removal of five cassava cultivars planted by different planting methods in late rainy season of northeastern Thailand. A split plot design was used in this study. The planting methods (vertical and horizontal) were assigned as main-plots. Cassava cultivars (Rayong-7, Rayong-11, Rayong-72, Huaybong-80 and E-dum) were assigned as sub-plots with four replications. Results showed that vertical planting gave significantly higher fresh storage root yield than those of horizontal planting, across five cassava cultivars. The cultivar Rayong-7 produced maximum fresh storage root yield across two planting methods, but not significantly different from Rayong 11, Huaybong 80 and Edum cultivars. Irrespective of nutrient removal, N, P and K removed ranges from 2.9 - 3.6, 0.8 - 1.3 and 5.3 - 7.9 kg per ton fresh root weight, respectively depending on cassava cultivar. The cultivar Rayong-7 removed the highest quantities of N, and the cultivar Rayong-11 removed maximum of P and K in the present study. Regardless of nutrient removal at different plant parts;N, P and K removed maximum quantities in leaf, stem and storage root, respectively. Planting method had no significant effect on N and P removal, but significant effect on K removal. The vertical planting removed K higher than those of horizontal planting.

Effect of Planting Date, Spacing and Seeding Methods on Disease Development and Yield Components of Rice （Oryza sativa L.） in Southeastern Nigeria

To investigate the effect of planting date, spacing and seeding methods on disease development and yield components ofrice, a factorial experiment in randomized complete block design （RCBD） with four replications was conducted during 2011 plantingseason at Izzi Local Government Area （LGA） of Ebonyi State, Nigeria. This experiment was carried out with four levels of plantingdates （early June, late June, early July and late July）, three levels of spacing （15, 20 and 25 cm） and two levels of seeding method（direct seeding and seedling transplanting）. The studied traits included plant height （PH）, number of tillers （NT）, leaf area （LA）, rootlength （RL）, panicle length （PL）, 1,000 seed weight （SW）, disease incidence and severity. The result showed that all the factors hadsignificant effect on the parameters measured. Sowing in early July had the highest LA of 65.38 cm^2, PH of 122.00 cm, RL of 29.04cm and TN of 10.54, and the second largest PL of 25.08 cm and SW of 25.12 g. Also sowing in early July had the highest diseaseseverity of 3.21, followed by 3.14 which occurred in late July, while the least 2.17 occurred in early June. The direct seeding methodhad the highest disease incidence of 70.83%, followed by plant spacing of 15 cm × 15 cm which had the disease incidence of 69.72%,while sowing in early June had the least disease incidence of 57.50%. In conclusion, planting of rice in Southeastern Nigeria shouldbe done in early July, as the yield components were significantly better than in other dates though with the highest disease severity.

Improving Grain Yield of Indigenous Rice in Tidal Floodplain of Southern Bangladesh: Effect of Seedling Age and Transplanting Method

Rice production in the tidal floodplain of southern Bangladesh is constrained by uncontrolled water. In absence of high yielding varieties suitable for tidal floodplain, farmers grow low yielding indigenous cultivars of tall plant type. This paper reports the effect of agronomic management on the yield and yield components of an indigenous rice cultivar, Sadamota. The trial was conducted in 10 farmers’ plots located widely apart in two upazila (sub-districts)—Jhalakati and Rajapur. 45 d and 60 d old seedlings were transplanted either in rows at 40 cm × 20 cm spacing or following farmers’ traditional practice of random planting. Transplanting 60 d old seedlings produced 14% higher yield compared with 45 d old seedlings. Transplanting in rows also increased grain yield by 12%. The yield increase was associated with hill density, the number of effective tillers per hill and the number of spikelets per panicle.

Effects of Planting Methods and Seed Density on Vegetable Yield and Nutrient Composition of <i>Solanum macrocarpon</i>and <i>Solanum scabrum</i>in Southwest Nigeria

Two field studies were carried out using Solanum macrocarpon and Solanum scabrum to investigate the effects of planting methods and seed density required for optimum biomass yield and nutrient content in southwest Nigeria. Two planting methods (drilling and broadcasting), and two seed densities (4 and 8 table spoon full) were investigated as a 2×2×3 factorial experiment in randomized complete block design and replicated three times. Four seed spoons gave 25.78 kg seeds ha-1 for S. macrocarpon and 20.67 kg·seeds·ha-1 for S. scabrum. Significant highest S. macrocarpon shoots (2.75 kg·m-2) and Ca, K, Fe and Zn contents and S. scabrum (2.95 kg·m-2) and Zn content, were obtained with drilling and four spoons of seeds compared with broadcasting and 8 spoons of seeds. This treatment gave average values for N, P, K, Mg, Ca, Na, Fe, Zn, Mn, Cu, Ca/P and Na/K ratio were 2.79%, 0.03%, 3.37%, 1.64%, 0.02%, 300 mg·kg-1, 100 mg·kg-1, 300 mg·kg-1, 8 mg·kg-1, 1.22 and 0.008 for S. macrocarpon and 2.05%, 0.27%, 5.81%, 3.27%, 2.91%, 0.09%, 280 mg·kg-1, 52.99 mg·kg-1, 359.35 mg·kg-1 and 22.42 mg·kg-1, 11.63 and 0.016 for S. scabrum. It was concluded that planting in drilling made weeding, fertilizer application, irrigation and harvesting more effective rather than by broadcasting, and four spoons of seeds per 9 m-2 produced deep green and broader leaves and balanced nutrient contents than eight spoons of seeds.

Effect of Maize/Haricot Bean Intercropping on Soil Fertility Improvement under Different Tied Ridges and Planting Methods, Southeast Ethiopia

Mono cropping is the dominant factor influencing plant nutrient uptake and loss of soil quality in Ethiopia whereas intercropping of cereal/legume has positive environmental qualities. Likewise drought and moisture stress condition is widely expanding from all direction to the center of the country. Therefore, the objective of this research was to evaluate influence of planting methods, tied ridge and cropping system on different soil chemical properties in case of Madda Walabu district, Southeast Ethiopia. It was undertaken at Bidire from March 2016 to January, 2017. In this experiment, one maize variety (Melkassa 2) and one haricot bean variety (Nasir) were used. Treatments include open end and closed end tied ridge;sole cropping and intercropping;and in furrow, on ridge and flat bed planting. Each treatment has been triplicate and the experiment plots were laid out in randomized complete block design. Intercropping of maize-haricot bean with tied ridge and planting methods were highly influenced soil pH, exchangeable potassium, available phosphorous, soil organic matter and total soil nitrogen. Generally, the use of intercropping and closed end tied ridge in combination with in furrow planting significantly increased (p0.05) soil fertility in the system, which could be promising for sustainable improvement of crop production and productivity for semi arid areas of Bale zone.

Comparison of Wheat Planting Methods and Residue Incorporation Under Saline-Sodic Soil

The present research was conducted to monitor the wheat productivity along with residue incorporation under saline-sodic soils by examining different planting methods at Zaidi Farm, Kakar Gill, Sheikhupura District, Punjab Province in 2007-2008. Randomized Complete Block Design （RCBD） with three replications was used having treatments： control （broadcast）, zero till wheat plantation, wheat plantation using happy seeder and wheat plantation on raised beds. It was observed that tillering was pretty higher （141 and 139 m2） under raised bed as well as happy seeder plantation as compared to zero tilled wheat and broadcast technique. A significant relation was detected among maximum straw and grain yield （4,898 and 1,752 kg-ha1） in raised bed followed by happy seeder planting method. The lowest grain yield was recorded in the broadcast method. Maximum net revenue earned by raised bed planting method （39,908 PKR） followed by happy seeder methodology （37,533 PKR）. The overall study suggests that raised bed and happy seeder wheat plantation are the superior planting methods.

Bamboo （Bambusa vulgaris） Regeneration by Cuttings： Comparative Study of Planting Methods of Culm Cuttings at UR-CAVM Busogo Campus Tree Nursery

Bamboo is one of the fastest growing and highest yielding renewable resources with multiple uses in the world. Lack of seedlings in sufficient number has generally been a major constraint in establishing more bamboo plantations. This study investigated the efficiency of regenerating Bambusa vulgaris through cuttings at Busogo sector, Musanze district, using vertical and horizontal methods with and without water treatment. The experiment consisted in a RCBD （Randomized Complete Block Design） with 4 replications. The growth and sprouting of the 64 cuttings were monitored for three months and 18 days （105 days）. In terms of planting method, horizontal planting method showed best sprouting percentage of 68%. In terms of treatment used, horizontal planting method without using water treatment showed slightly better sprouting percentage of 60%. The results further show that about 87% of sprouts had between 0 and 30 cm height and 98% of sprouts had basal diameter ranging from 0 to 20 mm only 105 days after planting. Indeed, the horizontal planting methods provided highest survival rate of sprouts than the vertical planting method （74%） of planted cuttings. Furthermore, the results show that, 105 days after planting, cuttings with horizontal method were more productive in terms of root development. In terms of planting method using water treatment, the horizontal planting method with water treatment showed highest rooting percentage （44%）. Therefore, farmers should be trained and encouraged to use horizontal planting method using water treatment in order to get better results in regenerating bamboo through cuttings.

A Method Suitable for Extracting Genomic DNA from Animal and Plant——Modified CTAB Method

[Objective] The study aimed to introduce a rapid and effective method that is suitable for extracting genomic DNA from animal and plant. [ Method ] The genomic DNAs were extracted from tender leaves of 24 peanut cuhivars and from the liver, lung and kidney of white mouse through the specifically modified CTAB method. The DNAs were run on agarose gel, next detected by DNA/Protein analyzer. Finally PCR amplification was conducted to detect the quality of DNAs extracted using the modified CTAB method. [ Result] The clear and orderly bands were observed in gel detection, and the values of OD200/OD200 for DNAs extracted via modified CTAB method were between 1.77 - 1.83. The DNAs performed well in PCR amplification. [ Conclusion] The DNAs extracted by modified CTAB method could satisfy the requirement of PCR amplification.

Development and Transition of Rice Planting in China

[Objective] This paper aimed to clarify the rice planting methods and its supporting technology to be developed in rice producing areas in China. [Method] Evolvement of rice planting methods in rice producing areas in China and in representative rice-growth countries abroad, its characteristics, adaptability and key issues were analyzed. [Result] The analysis of development of rice planting method in China and abroad indicated that rice planting method was adapted to rice-based cropping system and ecological environment, and its transition accompanied with social and economic development. With agricultural labor transfer from agriculture to other industries since 1990’s, rice seedling throwing was gradually applied and in recent decades, while direct seeding and machine transplanting were practiced. Now, hand transplanting is still the main rice planting method, adopted in 50% of national rice planting area; seedling throwing, direct seeding and machine transplanting are conducted in 25% , 12% and 13% of the national rice planting area. [Conclusion] Machine transplanting should be a leading rice planting method. Though area covered with machine direct seeding is still small up to now, it can be practiced in some rice growing area due to labor saving and low cost. Leading planting methods and its supporting key technologies are proposed in various rice producing areas in the future.

Entropy Method Based Evaluation for Plant Landscape in Tourist Scenic Spots

Taking five scenic spots in southeast region of Tibet as research objects,this paper calculated the weight of plant landscape evaluation system by entropy weight method,and compared the plant landscape in scenic spots from aesthetic effect,ecological harmony and service functions. The results show that the rank of the comprehensive attributes from high to low is as follows: Nanyigou,Lulang Forest,Kading Mountain Waterfall,Yarlung Zangbo Grand Canyon,and Basomtso Lake.

Effects of Planting Pattern and Meteorological Factors on Yield of Ryegrass Planted in Fallow Fields

The aim was to research effects of meteorological factors on yield of ryegrass in fal ow field in winter. [Method] With grass yield as a dependent variable, effects of meteorological factors on ryegrass yield were explored by differ-ent planting methods. [Result] The yield of Zuanshi T was higher than that of Tegao; strip sowing performed better compared with dispersedly sowing and plough-ing better than no-til age; extremely high and low temperatures showed negative correlation with grass yield; higher daily average temperature, rainfal and sunshine hour improved grass yield; relative humidity and frost-free period had insignificant effects on yield. [Conclusion] The region with less extreme temperatures should be chosen as the site for growing ryegrass.

A Review of the Methods of Identifying and Testing Plant Cold Resistance

Low-tempemture stress is a major abiotic stress influencing plant growth, economic yield and quality worldwide. Precise and reliable identification and test of plant cold resistance is a foundation for exploring low-temperature damages, cold resistance mechanism of plants, cultivating and innovating quality cold-re- sistant germplasm resources, which is rather important for woody plants because their perennial and large-sized characteristics. Generally, most researches on plant cold-resistant physiology focused on identification and utilization of cold resistance worldwide, and a few on test methods of cold resistance, but cold resistance mechanism has been less reported. Therefore, researches on methods of identifying and testing plant resistance have achieved considerable progress, accumulated much experience and formed characteristics gradually in terms of methodology. Current methods of identifying plant cold resistance include open field/outdoor culti- vation evaluation, cold and frost damage investigation, simulated cold weather, and mathematical model forecast. And the methods of testing plant cold resistance include growth condition test, frozen index investigation, electrolyte leakage, bioelectrical impedance mapping and so on. Synthesizing the methods of identifying and testing plant cold resistance should be a key matter in the present and future researches and application of plant cold resistance physiology, improvement and in- novation of the identification and test will be an important direction of the future researches. Identification and test of plant cold resistance based on genomies, meta- bonomics and proteomics should be the new trend of the researches on physiology and ecology of plant cold resistance.

A Widely Applicable Method for Plant Genomic DNA Extraction

[Objective] This study aimed to explore a method for plant genomic DNA extraction, to provide guidance for rapid extraction of genomic DNA from plant tissues. [ Method] Based on the published genomic DNA extraction methods, operation steps, reagent amount and processing time of SDS extraction method were optimized. [Result] A widely applicable method was established initially for genomic DNA extraction from various varieties of plants and various kinds of plant tissues. Quality of the extracted genomic DNA was relatively good, which meets the requirements for further operation. [ Conclusion] This study provided guidance for rapid plant genomic DNA extraction.

Natural products and extracts from plants as natural UV filters for sunscreens:A review

Although solar exposure is necessary for human health,phototoxicology induced by excessive UVB and UVA radiation,which involves sunburns,skin aging and even tu-morigenesis,has been widely researched.Sunscreen is one of the most important ways to protect skin from UV phototoxic damage.As well as inorganic and organic UV filters,some natural products or plant extracts with aromatic rings in their structures,such as flavonoids or polyphenols,can absorb UV to reduce sunburn,acting as a natu-ral UV filter;they also show antioxidant or/and anti-inflammatory activity.This could explain why,although there are no officially approval natural commercial sun-filters,more and more commercial sunscreen products containing plant extracts are avail-able on the market.Here we summarize articles focusing on natural UV filters from plant published in the last 6 years,selecting the most significant data in order to better understand the photoprotective activity of natural products and extracts from plants,including their major constituents and main biological effects,methods for evaluating UV radiation resistance,anti-UV radiation experimental models and anti-UV radiation mechanisms.

Research Advances in Detection Methods of Plant Growth Regulators for Agricultural Products

In recent years,plant growth regulators are widely used in agricultural products.As the toxicity of plant growth regulator residues has gained increasing concerns,trace analysis methods for plant growth regulators have been developed.In this paper,the major methods with advantages and disadvantages for the detection and pre-treatment of plant growth regulator residues in agricultural products were summarized,including gas chromatography(GC),high performance liquid chromatography(HPLC),chromatographic technique combined with mass spectrometry,enzyme-linked immunosorbent assay(ELISA),capillary electrophoresis(CE)and so on.Meanwhile,the development prospects were also discussed.

Performance of Medicinal and Aromatic Chamomile (Matricaria chamomilla L.) under Different Planting, Manure cum Fertilizer Regimes in Kathmandu Valley

New and old genotypes of German chamomile(Matricaria chamomilla Linn.)were experimented under different planting methods,manure and fertilizer combinations first time in Kathmandu valley.The researches aimed at evaluating genotypes performance,identifying suitable planting method and optimum combination of manures and fertilizers.The germplasm evaluation experiment was conducted at the National Agriculture Research Institute(NARI)field,Khumaltar during January-May.Planting method trial was laid out in randomized complete block and manure cum fertilizer trial was in Latin square design(LSD).The results showed good performance of chamomile growth,development and oil content.Major agronomic traits had average figures in all experiments comparable to chamomile growing areas.Most data differed significantly and at par.New genotype produced relatively higher number of branches,leaves and flower heads maintaining more plant density.Growth was higher in row sown and transplanted plots,row sowing found more beneficial.Transplanted plots delayed maturity.Transplanted(0.95%)and broadcasted(0.80%)chamomile gave higher oil percentage,no difference found between genotypes.Significantly(p<0.05)higher and at par branch numbers,flower heads,biomass yield,plant height were recorded in the treatments with higher rate of farm yard manure(FYM)20 t/ha followed by combined application of NPK 60:40:20 kg/ha plus manure 10 t/ha.Oil content was the highest(0.95%)in FYM(20 t/ha)applied plots followed by combined fertilization(0.80%).Despite inferior to treatment N:P:K 60:40:20 kg/ha only to enhance growth and oil production,other results suggested suitable technology and successful cultivation of chamomile in valley conditions are recommended.