The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive manufacturing.In this paper,with the wire feeding s...The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive manufacturing.In this paper,with the wire feeding speed as a characteristic quantity,the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio(under the condition of a constant total current),the wire current/main current and the position of the wire in the arc axial direction.The results showed that under the premise that the total current remains unchanged(100 A),as the current separation ratio increased,the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power,the first melting mass range remained constant;the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed,and the second melting mass range was expanded.When the wire current increased,the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount;however,when the main current increased,the plasma arc power was the only factor causing the increase in the wire melting amount.The average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc power.The minimum melting amount was not affected by the wire-torch distance under any current separation ratio tested.When the current separation ratio increased and reached a threshold,the middle melting amount remained constant with increasing wire-torch distance.When the current separation ratio continued to increase and reached the next threshold,the maximum melting amount remained constant with the increasing wire-torch distance.The effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation ratio.Through this study,the decoupling mechanism and ability of this innovative arc heat source is more clearly.展开更多
The physical characteristics of a plasma arc affect the stability of the keyhole and weld pool directly during keyhole plasma arc welding (KPAW). There will be significant change for these characteristics because of...The physical characteristics of a plasma arc affect the stability of the keyhole and weld pool directly during keyhole plasma arc welding (KPAW). There will be significant change for these characteristics because of the interaction between the keyhole weld pool and plasma arc after penetration. Therefore, in order to obtain the temperature field, flow field, and arc pressure of a plasma arc under the reaction of the keyhole, the physical model of a plasma arc with a pre-set keyhole was established. In addition, the tungsten and base metal were established into the calculated domain, which can reflect the effect of plasma arc to weld pool further. Based on magneto hydrodynamics and Maxwell equations, a twoSdimensional steady state mathematical model was established. Considering the heat production of anode and cathode, the distribution of temperature field, flow field, welding current density, and plasma arc pressure were solved out by the finite difference method. From the calculated results, it is found that the plasma arc was compressed a second time by the keyhole. This additional constraint results in an obvious rise of the plasma arc pressure and flow velocity at the minimum diameter place of the keyhole, while the temperature field is impacted slightly. Finally, the observational and metallographic experiments are conducted, and the shapes of plasma arc and fusion line agree with the simulated results generally.展开更多
A unified numerical model is developed to couple the plasma arc, weld pool and keyhole in a self consistent way. The plasma arc/anode interface and the melt/solid interface are treated specially, the VOF method is use...A unified numerical model is developed to couple the plasma arc, weld pool and keyhole in a self consistent way. The plasma arc/anode interface and the melt/solid interface are treated specially, the VOF method is used to trace the moving keyhole wall, and the fluid flow and heat transfer in both the plasma arc and weld pool are numerically simulated. The distributions of current density and arc pressure on the weld pool surface during the keyhole formation process are analyzed using the coupled model. The predicted arc pressure and current density are compared with the experimentally measured results, and both are in good agreement.展开更多
A prototype of Pulsed Plasma Arc Cladding system was developed, in which single power source supplies both transferred plasma arc (TPA) and non-transferred plasma arc (N-TPA). Both plasmas work in turn in a high frequ...A prototype of Pulsed Plasma Arc Cladding system was developed, in which single power source supplies both transferred plasma arc (TPA) and non-transferred plasma arc (N-TPA). Both plasmas work in turn in a high frequency controlled by an IGBT connecting nozzle and workpiece. The working frequency of IGBT ranges from 50 ~ 7 000 Hz, in which the plasmas can work in turn smoothly. Higher than 500 Hz of working frequency is suggested for promotion of cladding quality and protection of IGBT. Drag phenomenon of TPA intensifies as the frequency goes up, which tends to increase the current proportion of TPA and suppress N-TPA. The occupation ratio of IGBT can be regulated from 5% ~ 95%, which balances the power supplies of both plasmas. An occupation ratio higher than 50% gives adequate proportion of arc current for N-TPA to preheat powder.展开更多
The axial pressure in plasma arc is measured under different conditions. Theeffects of the parameters, such as welding current, plasma gas flow rate, electrode setback and arclength, on the pressure in plasma arc are ...The axial pressure in plasma arc is measured under different conditions. Theeffects of the parameters, such as welding current, plasma gas flow rate, electrode setback and arclength, on the pressure in plasma arc are investigated and quantitative analyzed to explain therelationship between the quality of weld and the matching of parameters in plasma arc weldingprocess.展开更多
An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature ...An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature field in keyhole plasma arc welding is conducted and the weld geometry is obtained. The predicted results are in agreement with the measured ones.展开更多
The plasma arc pressure plays an important role in determining the keyhole formation and size. So it is of great significance to choose adaptive distribution mode of the plasma arc pressure for determining keyhole sha...The plasma arc pressure plays an important role in determining the keyhole formation and size. So it is of great significance to choose adaptive distribution mode of the plasma arc pressure for determining keyhole shape and size. In this study, through employing a double-elliptic distribution mode of plasma arc pressure, three-dimensional keyhole was numerically simulated. The unsymmetric feature of the keyhole inside the weld pool was described. The development of keyhole was demonstrated under different levels of welding current. The critical current required to form an open keyhole was obtained for the study cases .展开更多
It is of great significance to model the keyhole shape and dimensions to optimize the plasma arc welding process parameters. In this study, through employing a combined volumetric heat source mode, the weld pool in ke...It is of great significance to model the keyhole shape and dimensions to optimize the plasma arc welding process parameters. In this study, through employing a combined volumetric heat source mode, the weld pool in keyhole plasma arc welding is determined firstly, and then the dynamic force-balance condition on the interface between the plasma jet and the molten metal is dealt with in describing the keyhole formation inside the weld pool. The effects of welding current on the shape and size of keyhole are numerically analyzed. The sharp transformation from a partial keyhole to a full-penetration keyhole is quantitatively demonstrated.展开更多
In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld...In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld form a hard, wearable, corrode-resisting layer on the surface to enhance the mechanical property of the machine component. From 1980s, there is a new method of surface hardening that is heating with plasma arc. It overcomes the shortage of old methods and is adopted in automotive product industry. The plasma equipm ent is small and easy to be controlled, so it could be installed on a robot and moved everywhere. This paper analyzed the character of the plasma at first, then studied the plasm a arc as Guess distribution circular heat source to create the surface hardening temperature field and heating process. The method of the plasma arc surface har dening technology is given. This paper describes hardware design of the plasma arc surface-hardening robot and analyzes its kinematics. This robot is a humanoid form robot with a mobile p latform, a 7 DOF redundancy arm and a 2 DOF trunk. The footprint is an important feature for the robot that has to move in a cluttered environment. Thus the mob ile platform of the plasma arc robot is an omni-directional mobile robot with o rthogonal-wheel assemblies. The trunk is important for keep balance of the robo t. Thus a series spring is fixed in the trunk to provide accurate force feedback at each direction and insulate the shock loads from arm and mobile platform. Th e redundancy arm configuration is similar to a broadly simplified model of the h uman arm with 7 DOF. The maximum radius is about 1 m with a maximum load of abou t 1 kg. The redundancy of the 7 DOF allows the handling of situation in whic h additional movement constraints have to meet and avoids static or dynamic obst acles. It has better adaptation to typical human environment and to allow for hu man-like behavioral strategies in solving complex tasks. This robot will be applied widely in shipbuilding industry, mining industry and automotive product industry.展开更多
A three-dimensional numerical model is developed to study the behaviour of an argon-nitrogen plasma arc inside a non-transferred torch. In this model, both the entire cathode and anode nozzle are considered to simulat...A three-dimensional numerical model is developed to study the behaviour of an argon-nitrogen plasma arc inside a non-transferred torch. In this model, both the entire cathode and anode nozzle are considered to simulate the plasma arc. The argon-nitrogen plasma arc is simulated for different arc currents and gas flow rates of argon. Various combinations of arc core radius and arc length, which correspond to a given torch power, are predicted. A most feasible combination of the same, which corresponds to an actual physical situation of the arc inside the torch, is identified using the thermodynamic principle of minimum entropy production for a particular torch power. The effect of the arc current and gas flow rate on the plasma arc characteristics and torch efficiency is explained. The effect of the nitrogen content in the plasma gas on the torch power and efficiency is clearly detected. Predicted torch efficiencies are comparable to the measured ones and the effect of the arc current and gas flow rate on predicted and measured efficiencies is almost similar. The efficiency of the torch, cathode and anode losses and core temperature and velocity at the nozzle exit are reported for five different cases.展开更多
In this paper, characteristics of a treatment and operated at atmospheric pressure dual torch plasma arc used for hazardous waste are studied, and also compared with those of the multi-torch plasma arc and the single ...In this paper, characteristics of a treatment and operated at atmospheric pressure dual torch plasma arc used for hazardous waste are studied, and also compared with those of the multi-torch plasma arc and the single torch plasma arc. The dual torch plasma arc is generated between the cathode and anode with argon as the working gas. The temperature distributions of the plasma arc are measured using a spectroscope and line pair method with the assumption of local thermodynamic equilibrium (LTE) for the DC arc current I=100 A and argon flow rate Q = 15 slpm. The measurements show that the temperatures of the dual torch arc plasma in the regions near the cathode, the anode and the center point are 10,000 K, 11,000 K and 9,000 K, respectively. And the high temperature region of the multi torch plasma arc is of double or much wider size than that of a conventional dual torch plasma arc and single plasma torch. Based on the preceding studies, a dual torch plasma arc furnace is developed in this study. The measured gas temperature at the center region of the argon arc is about 11,000 K for the case of I=200 A and Q=30 slpm operated in atmosphere.展开更多
A new kind of control system for keyhole plasma arc welding (K-PAW) was developed based on the computer and the Graphics Language--LabVIEW. It can set and output the required current waveforms with desired decreasin...A new kind of control system for keyhole plasma arc welding (K-PAW) was developed based on the computer and the Graphics Language--LabVIEW. It can set and output the required current waveforms with desired decreasing slopes so that the corresponding "opening and closing" of keyhole can occur periodically. With this control strategy of welding current waveforms, the workpiece is fully penetrated while no burn-through Occurs. Keyhole plasma arc welding experiments were conducted to verify the stability and reliability of the developed system.展开更多
Keyhole plasma arc welding experiments are conducted to measure the weld geometry and penetration at different moments during the initial phase from igniting arc to quasi-steady state. Indirect information on keyhole ...Keyhole plasma arc welding experiments are conducted to measure the weld geometry and penetration at different moments during the initial phase from igniting arc to quasi-steady state. Indirect information on keyhole formation and evolution in plasma arc welding can be extracted based on the weld macrophotograph at cross section. It has laid foundation to verify the mathematical models of keyhole plasma arc welding.展开更多
The key problem for numerical simulation of plasma arc welding (PAW) process is to develop a suitable and adaptive volumetric heat source mode which reflects the physical characteristics of keyhole PAW. To this end,...The key problem for numerical simulation of plasma arc welding (PAW) process is to develop a suitable and adaptive volumetric heat source mode which reflects the physical characteristics of keyhole PAW. To this end, the keyhole geometry under different PAW process conditions must be predicted. In this paper, a mathematical model for determining the keyhole shape is developed with considering the mass and momentum conservation of the in-keyhole plasma jet as well as the pressure equilibrium at the plasma jet/liquid metal boundary. A suitable heat source model related to the keyhole shape is applied to the calculation of PAW weld dimensions. The predicted results are in good agreement with the experimental ones.展开更多
By using alternating current plasma arc welding,the influences were studied of such parameters as welding curent,arc voltage,welding speed,wire feed rate,and magnitude of ion gas flow on front melting width,wdle rei...By using alternating current plasma arc welding,the influences were studied of such parameters as welding curent,arc voltage,welding speed,wire feed rate,and magnitude of ion gas flow on front melting width,wdle reinforcement,and back melting width of LF6 aluminum alloy.Model of the formation of welding seam in alternating current plasma arc welding of aluminum was set up with the method of artificial neural neural network - BP algorithm. Qyakuty of formation was consequently predicted and evaluated.The experimental result shows that,compared with other modeling methods,artificial network model can be used to more accurately predict formation of weld,and to guide the production practice.展开更多
Completely understanding the physical mechanisms of the plasma arc is critical to its application in welding of medium thickness plates. In this study, a mathematical model is developed to analyze the temperature, flu...Completely understanding the physical mechanisms of the plasma arc is critical to its application in welding of medium thickness plates. In this study, a mathematical model is developed to analyze the temperature, fluid flow, electromagnetic fields and pressure distribution in plasma arc welding. The correlations between the torch structure ( nozzle diameter) and the plasma are properties are analyzed qualitatively. The influence of the plasma gas flow rate on the plasma arc behavior is also simulated numerically. The temperature distribution and current density of the plasma are change greatly with a little variation of the nozzle diameter and^or the plasma gas flow rate. Compared to the tungsten-inert-gas arc with almost same conditions, the heat intensity, fluid velocity and pressure at the anode suoCace rise by one order of magnitude for a plasma arc. The analysis results lay solid foundation for effective usage ofplnsma arc welding.展开更多
Modeling and simulation of fluid flow and heat transfer in keyhole plasma arc welding is of great significance for optimizing the process parameters. In this study, a three-dimensional transient model is established t...Modeling and simulation of fluid flow and heat transfer in keyhole plasma arc welding is of great significance for optimizing the process parameters. In this study, a three-dimensional transient model is established to analyze numerically the heat transfer and fluid flow phenomena in keyhole plasma arc welding. VOF (volume of fluid) method is used to track the boundary of the keyhole. The dynamic developments of keyhole geometry, the fluid velocity field and temperature profiles are numerically simulated. And the changing Of the fluid velocity and pressure distribution on the keyhole wall in the forming process of the keyhole are analyzed.展开更多
Abstract Horizontal welding is important for heavy or huge welding structures. Keyhole mode variable polarity plasma arc welding of aluminum alloy plates with medium thickness was carried out in horizontal position. T...Abstract Horizontal welding is important for heavy or huge welding structures. Keyhole mode variable polarity plasma arc welding of aluminum alloy plates with medium thickness was carried out in horizontal position. The characteristic of welding defects was introduced. Preliminary experiments indicated that the undercut defect could not be eliminated easily. The relationship between welding parameters and the undercut defect showed that this deject could be lessened by using higher heat input. The fluid flow of weld pool was observed by a high speed camera. The fluid flow in weld pool was not symmetric and much of molten metal gathered in the lower part. The fluid flow velocity in the lower part was bigger than that in the upper part. To this end, the formative mechanism of the undercut defect was proposed. The flowability of the molten metal was an influential factor for the undercut defect. A preheating method was designed to verify the formative mechanism.展开更多
The development of closed-loop control systems is one of the most effective ways to improve the stability of the keyhole status during keyhole plasma arc welding (K-PAW). Due to the disadvantages of the "one-pulse-...The development of closed-loop control systems is one of the most effective ways to improve the stability of the keyhole status during keyhole plasma arc welding (K-PAW). Due to the disadvantages of the "one-pulse-one-keyhole" technology based on the conventional square current waveform, the controlled pulse welding current waveform is newly applied to control the keyhole open and close periodically. In order to realize the real-time control on the keyhole behavior with this advanced current waveform, welding experiments and system identification are conducted based on the classical control theory. One complete welding cycle can be divided into 3 periods. The keyhole establishing time is the most important time variable, which determines the keyhole behavior and welding process stability. At the same time, the averaged effiux plasma arc voltage during one pulse cycle can reflect the real keyhole dimension and status in a real-time manner. Therefore, two single-input-single-output (SISO) systems are proposed, in which keyhole establishing time and keyhole average dimension are taken as the system controlled variables respectively. Welding experiments are designed with the peak current varying randomly. Experiments show that the keyhole establishing time changes in an opposite direction to the varied peak current, and the averaged efflux plasma arc voltage varies with the same trend as the peak current. Based on the least squares technique and F test of classical system identification, second order difference equation for keyhole establishing time/peak current system and first order difference equation for keyhole average dimension/peak current system are obtained. It is proved that the calculated data by the two mathematical expressions are well matched with the measured data. The proposed research provides mathematical expressions and theoretical analysis to develop closed-loop systems for the controlled pulse K-PAW.展开更多
The characteristics of a nitrogen arc using a graphite cathode and a melting anode in a pilot-scale plasma furnace are investigated. The voltage is examined as a function of current and apparent plasma length. The vol...The characteristics of a nitrogen arc using a graphite cathode and a melting anode in a pilot-scale plasma furnace are investigated. The voltage is examined as a function of current and apparent plasma length. The voltage increases non-linearly with the increase of apparent plasma length, with the current fixed. The experimental data so obtained are compared with the predictions of the Bowman model for the electric arc, and with numerical simulations as well. The level of agreement between the experimental data at the melting anode and the numerical predictions confirms the suitability of the proposed the Bowman model. These characteristics are relevant to the engineering design and evaluation of a DC plasma furnace and reactor for the treatment of hazardous fly ash waste.展开更多
基金Supported by Youth Program of National Natural Science Foundation of China(Grant No.51905008)Beijing Postdoctoral Research Foundation of China(Grant No.2021-zz-064)+2 种基金Shandong Provincial Major Science and Technology Innovation Project of China(Grant No.2020JMRH0504)Jinan Innovation Team Project of China(Grant No.2021GXRC066)Quancheng Scholars Construction Project of China(Grant No.D03032).
文摘The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive manufacturing.In this paper,with the wire feeding speed as a characteristic quantity,the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio(under the condition of a constant total current),the wire current/main current and the position of the wire in the arc axial direction.The results showed that under the premise that the total current remains unchanged(100 A),as the current separation ratio increased,the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power,the first melting mass range remained constant;the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed,and the second melting mass range was expanded.When the wire current increased,the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount;however,when the main current increased,the plasma arc power was the only factor causing the increase in the wire melting amount.The average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc power.The minimum melting amount was not affected by the wire-torch distance under any current separation ratio tested.When the current separation ratio increased and reached a threshold,the middle melting amount remained constant with increasing wire-torch distance.When the current separation ratio continued to increase and reached the next threshold,the maximum melting amount remained constant with the increasing wire-torch distance.The effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation ratio.Through this study,the decoupling mechanism and ability of this innovative arc heat source is more clearly.
基金Project supported by the National Natural Science Foundation of China(Grant No.51505008)the National Science and Technology Major Project of China(Grant No.2014ZX04001-171)
文摘The physical characteristics of a plasma arc affect the stability of the keyhole and weld pool directly during keyhole plasma arc welding (KPAW). There will be significant change for these characteristics because of the interaction between the keyhole weld pool and plasma arc after penetration. Therefore, in order to obtain the temperature field, flow field, and arc pressure of a plasma arc under the reaction of the keyhole, the physical model of a plasma arc with a pre-set keyhole was established. In addition, the tungsten and base metal were established into the calculated domain, which can reflect the effect of plasma arc to weld pool further. Based on magneto hydrodynamics and Maxwell equations, a twoSdimensional steady state mathematical model was established. Considering the heat production of anode and cathode, the distribution of temperature field, flow field, welding current density, and plasma arc pressure were solved out by the finite difference method. From the calculated results, it is found that the plasma arc was compressed a second time by the keyhole. This additional constraint results in an obvious rise of the plasma arc pressure and flow velocity at the minimum diameter place of the keyhole, while the temperature field is impacted slightly. Finally, the observational and metallographic experiments are conducted, and the shapes of plasma arc and fusion line agree with the simulated results generally.
基金The authors are grateful to the financial support for this project from the National Natural Science Foundation of China (No. 50936003 ).
文摘A unified numerical model is developed to couple the plasma arc, weld pool and keyhole in a self consistent way. The plasma arc/anode interface and the melt/solid interface are treated specially, the VOF method is used to trace the moving keyhole wall, and the fluid flow and heat transfer in both the plasma arc and weld pool are numerically simulated. The distributions of current density and arc pressure on the weld pool surface during the keyhole formation process are analyzed using the coupled model. The predicted arc pressure and current density are compared with the experimentally measured results, and both are in good agreement.
文摘A prototype of Pulsed Plasma Arc Cladding system was developed, in which single power source supplies both transferred plasma arc (TPA) and non-transferred plasma arc (N-TPA). Both plasmas work in turn in a high frequency controlled by an IGBT connecting nozzle and workpiece. The working frequency of IGBT ranges from 50 ~ 7 000 Hz, in which the plasmas can work in turn smoothly. Higher than 500 Hz of working frequency is suggested for promotion of cladding quality and protection of IGBT. Drag phenomenon of TPA intensifies as the frequency goes up, which tends to increase the current proportion of TPA and suppress N-TPA. The occupation ratio of IGBT can be regulated from 5% ~ 95%, which balances the power supplies of both plasmas. An occupation ratio higher than 50% gives adequate proportion of arc current for N-TPA to preheat powder.
基金This project is supported by National Defense Technology Key Lab Foundation of China(No.98JS50.3.2.JW1601).
文摘The axial pressure in plasma arc is measured under different conditions. Theeffects of the parameters, such as welding current, plasma gas flow rate, electrode setback and arclength, on the pressure in plasma arc are investigated and quantitative analyzed to explain therelationship between the quality of weld and the matching of parameters in plasma arc weldingprocess.
文摘An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature field in keyhole plasma arc welding is conducted and the weld geometry is obtained. The predicted results are in agreement with the measured ones.
基金Acknowledgement The authors are grateful to the financial support for this project from the National Natural Science Foundation of China under grant No. 50540420570.
文摘The plasma arc pressure plays an important role in determining the keyhole formation and size. So it is of great significance to choose adaptive distribution mode of the plasma arc pressure for determining keyhole shape and size. In this study, through employing a double-elliptic distribution mode of plasma arc pressure, three-dimensional keyhole was numerically simulated. The unsymmetric feature of the keyhole inside the weld pool was described. The development of keyhole was demonstrated under different levels of welding current. The critical current required to form an open keyhole was obtained for the study cases .
文摘It is of great significance to model the keyhole shape and dimensions to optimize the plasma arc welding process parameters. In this study, through employing a combined volumetric heat source mode, the weld pool in keyhole plasma arc welding is determined firstly, and then the dynamic force-balance condition on the interface between the plasma jet and the molten metal is dealt with in describing the keyhole formation inside the weld pool. The effects of welding current on the shape and size of keyhole are numerically analyzed. The sharp transformation from a partial keyhole to a full-penetration keyhole is quantitatively demonstrated.
文摘In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld form a hard, wearable, corrode-resisting layer on the surface to enhance the mechanical property of the machine component. From 1980s, there is a new method of surface hardening that is heating with plasma arc. It overcomes the shortage of old methods and is adopted in automotive product industry. The plasma equipm ent is small and easy to be controlled, so it could be installed on a robot and moved everywhere. This paper analyzed the character of the plasma at first, then studied the plasm a arc as Guess distribution circular heat source to create the surface hardening temperature field and heating process. The method of the plasma arc surface har dening technology is given. This paper describes hardware design of the plasma arc surface-hardening robot and analyzes its kinematics. This robot is a humanoid form robot with a mobile p latform, a 7 DOF redundancy arm and a 2 DOF trunk. The footprint is an important feature for the robot that has to move in a cluttered environment. Thus the mob ile platform of the plasma arc robot is an omni-directional mobile robot with o rthogonal-wheel assemblies. The trunk is important for keep balance of the robo t. Thus a series spring is fixed in the trunk to provide accurate force feedback at each direction and insulate the shock loads from arm and mobile platform. Th e redundancy arm configuration is similar to a broadly simplified model of the h uman arm with 7 DOF. The maximum radius is about 1 m with a maximum load of abou t 1 kg. The redundancy of the 7 DOF allows the handling of situation in whic h additional movement constraints have to meet and avoids static or dynamic obst acles. It has better adaptation to typical human environment and to allow for hu man-like behavioral strategies in solving complex tasks. This robot will be applied widely in shipbuilding industry, mining industry and automotive product industry.
文摘A three-dimensional numerical model is developed to study the behaviour of an argon-nitrogen plasma arc inside a non-transferred torch. In this model, both the entire cathode and anode nozzle are considered to simulate the plasma arc. The argon-nitrogen plasma arc is simulated for different arc currents and gas flow rates of argon. Various combinations of arc core radius and arc length, which correspond to a given torch power, are predicted. A most feasible combination of the same, which corresponds to an actual physical situation of the arc inside the torch, is identified using the thermodynamic principle of minimum entropy production for a particular torch power. The effect of the arc current and gas flow rate on the plasma arc characteristics and torch efficiency is explained. The effect of the nitrogen content in the plasma gas on the torch power and efficiency is clearly detected. Predicted torch efficiencies are comparable to the measured ones and the effect of the arc current and gas flow rate on predicted and measured efficiencies is almost similar. The efficiency of the torch, cathode and anode losses and core temperature and velocity at the nozzle exit are reported for five different cases.
文摘In this paper, characteristics of a treatment and operated at atmospheric pressure dual torch plasma arc used for hazardous waste are studied, and also compared with those of the multi-torch plasma arc and the single torch plasma arc. The dual torch plasma arc is generated between the cathode and anode with argon as the working gas. The temperature distributions of the plasma arc are measured using a spectroscope and line pair method with the assumption of local thermodynamic equilibrium (LTE) for the DC arc current I=100 A and argon flow rate Q = 15 slpm. The measurements show that the temperatures of the dual torch arc plasma in the regions near the cathode, the anode and the center point are 10,000 K, 11,000 K and 9,000 K, respectively. And the high temperature region of the multi torch plasma arc is of double or much wider size than that of a conventional dual torch plasma arc and single plasma torch. Based on the preceding studies, a dual torch plasma arc furnace is developed in this study. The measured gas temperature at the center region of the argon arc is about 11,000 K for the case of I=200 A and Q=30 slpm operated in atmosphere.
文摘A new kind of control system for keyhole plasma arc welding (K-PAW) was developed based on the computer and the Graphics Language--LabVIEW. It can set and output the required current waveforms with desired decreasing slopes so that the corresponding "opening and closing" of keyhole can occur periodically. With this control strategy of welding current waveforms, the workpiece is fully penetrated while no burn-through Occurs. Keyhole plasma arc welding experiments were conducted to verify the stability and reliability of the developed system.
基金The authors are grateful to the financial support to this research from the National Natural Science Foundation of China under Grant No. 50540420570.
文摘Keyhole plasma arc welding experiments are conducted to measure the weld geometry and penetration at different moments during the initial phase from igniting arc to quasi-steady state. Indirect information on keyhole formation and evolution in plasma arc welding can be extracted based on the weld macrophotograph at cross section. It has laid foundation to verify the mathematical models of keyhole plasma arc welding.
基金The authors are grateful to the financial support to this research from the National Nature Science Foundation of China under Grant No. 50540420570.
文摘The key problem for numerical simulation of plasma arc welding (PAW) process is to develop a suitable and adaptive volumetric heat source mode which reflects the physical characteristics of keyhole PAW. To this end, the keyhole geometry under different PAW process conditions must be predicted. In this paper, a mathematical model for determining the keyhole shape is developed with considering the mass and momentum conservation of the in-keyhole plasma jet as well as the pressure equilibrium at the plasma jet/liquid metal boundary. A suitable heat source model related to the keyhole shape is applied to the calculation of PAW weld dimensions. The predicted results are in good agreement with the experimental ones.
文摘By using alternating current plasma arc welding,the influences were studied of such parameters as welding curent,arc voltage,welding speed,wire feed rate,and magnitude of ion gas flow on front melting width,wdle reinforcement,and back melting width of LF6 aluminum alloy.Model of the formation of welding seam in alternating current plasma arc welding of aluminum was set up with the method of artificial neural neural network - BP algorithm. Qyakuty of formation was consequently predicted and evaluated.The experimental result shows that,compared with other modeling methods,artificial network model can be used to more accurately predict formation of weld,and to guide the production practice.
基金Acknowledgement The authors are grateful to the financial support for this project from the National Natural Science Foundation of China ( Key Program Grant No. 50936003).
文摘Completely understanding the physical mechanisms of the plasma arc is critical to its application in welding of medium thickness plates. In this study, a mathematical model is developed to analyze the temperature, fluid flow, electromagnetic fields and pressure distribution in plasma arc welding. The correlations between the torch structure ( nozzle diameter) and the plasma are properties are analyzed qualitatively. The influence of the plasma gas flow rate on the plasma arc behavior is also simulated numerically. The temperature distribution and current density of the plasma are change greatly with a little variation of the nozzle diameter and^or the plasma gas flow rate. Compared to the tungsten-inert-gas arc with almost same conditions, the heat intensity, fluid velocity and pressure at the anode suoCace rise by one order of magnitude for a plasma arc. The analysis results lay solid foundation for effective usage ofplnsma arc welding.
文摘Modeling and simulation of fluid flow and heat transfer in keyhole plasma arc welding is of great significance for optimizing the process parameters. In this study, a three-dimensional transient model is established to analyze numerically the heat transfer and fluid flow phenomena in keyhole plasma arc welding. VOF (volume of fluid) method is used to track the boundary of the keyhole. The dynamic developments of keyhole geometry, the fluid velocity field and temperature profiles are numerically simulated. And the changing Of the fluid velocity and pressure distribution on the keyhole wall in the forming process of the keyhole are analyzed.
基金This research is supported by the National Natural Science Foundation of China (Grant No. 51475105).
文摘Abstract Horizontal welding is important for heavy or huge welding structures. Keyhole mode variable polarity plasma arc welding of aluminum alloy plates with medium thickness was carried out in horizontal position. The characteristic of welding defects was introduced. Preliminary experiments indicated that the undercut defect could not be eliminated easily. The relationship between welding parameters and the undercut defect showed that this deject could be lessened by using higher heat input. The fluid flow of weld pool was observed by a high speed camera. The fluid flow in weld pool was not symmetric and much of molten metal gathered in the lower part. The fluid flow velocity in the lower part was bigger than that in the upper part. To this end, the formative mechanism of the undercut defect was proposed. The flowability of the molten metal was an influential factor for the undercut defect. A preheating method was designed to verify the formative mechanism.
基金supported by National Natural Science Foundation of China(Grant No. 50936003)
文摘The development of closed-loop control systems is one of the most effective ways to improve the stability of the keyhole status during keyhole plasma arc welding (K-PAW). Due to the disadvantages of the "one-pulse-one-keyhole" technology based on the conventional square current waveform, the controlled pulse welding current waveform is newly applied to control the keyhole open and close periodically. In order to realize the real-time control on the keyhole behavior with this advanced current waveform, welding experiments and system identification are conducted based on the classical control theory. One complete welding cycle can be divided into 3 periods. The keyhole establishing time is the most important time variable, which determines the keyhole behavior and welding process stability. At the same time, the averaged effiux plasma arc voltage during one pulse cycle can reflect the real keyhole dimension and status in a real-time manner. Therefore, two single-input-single-output (SISO) systems are proposed, in which keyhole establishing time and keyhole average dimension are taken as the system controlled variables respectively. Welding experiments are designed with the peak current varying randomly. Experiments show that the keyhole establishing time changes in an opposite direction to the varied peak current, and the averaged efflux plasma arc voltage varies with the same trend as the peak current. Based on the least squares technique and F test of classical system identification, second order difference equation for keyhole establishing time/peak current system and first order difference equation for keyhole average dimension/peak current system are obtained. It is proved that the calculated data by the two mathematical expressions are well matched with the measured data. The proposed research provides mathematical expressions and theoretical analysis to develop closed-loop systems for the controlled pulse K-PAW.
基金supported by the National Natural Science Foundation of China (Grant No. 21171169)the Knowledge Innovation Project of the Chinese Academy of Sciences (Grant No. O45CF3A211)
文摘The characteristics of a nitrogen arc using a graphite cathode and a melting anode in a pilot-scale plasma furnace are investigated. The voltage is examined as a function of current and apparent plasma length. The voltage increases non-linearly with the increase of apparent plasma length, with the current fixed. The experimental data so obtained are compared with the predictions of the Bowman model for the electric arc, and with numerical simulations as well. The level of agreement between the experimental data at the melting anode and the numerical predictions confirms the suitability of the proposed the Bowman model. These characteristics are relevant to the engineering design and evaluation of a DC plasma furnace and reactor for the treatment of hazardous fly ash waste.