In the extreme conditions of high altitude,low temperature,low pressure,and high speed,the aircraft engine is prone to flameout and difficult to start secondary ignition,which makes reliable ignition of combustion cha...In the extreme conditions of high altitude,low temperature,low pressure,and high speed,the aircraft engine is prone to flameout and difficult to start secondary ignition,which makes reliable ignition of combustion chamber at high altitude become a worldwide problem.To solve this problem,a kind of multichannel plasma igniter with round cavity is proposed in this paper,the three-channel and five-channel igniters are compared with the traditional ones.The discharge energy of the three igniters was compared based on the electric energy test and the thermal energy test,and ignition experiments was conducted in the simulated high-altitude environment of the component combustion chamber.The results show that the recessed multichannel plasma igniter has higher discharge energy than the conventional spark igniter,which can increase the conversion efficiency of electric energy from 26%to 43%,and the conversion efficiency of thermal energy from 25%to 73%.The recessed multichannel plasma igniter can achieve greater spark penetration depth and excitation area,which both increase with the increase of height.At the same height,the inlet flow helps to increase the penetration depth of the spark.The recessed multichannel plasma igniter can widen the lean ignition boundary,and the maximum enrichment percentage of lean ignition boundary can reach 31%.展开更多
Relighting of jet engines at high altitudes is very difficult because of the high velocity, low pressure, and low tempera- ture of the inlet airflow. Successful ignition needs sufficient ignition energy to generate a ...Relighting of jet engines at high altitudes is very difficult because of the high velocity, low pressure, and low tempera- ture of the inlet airflow. Successful ignition needs sufficient ignition energy to generate a spark kernel to induce a so-called critical flame initiation radius. However, at high altitudes with high-speed inlet airflow, the critical flame initiation radius becomes larger; therefore, traditional ignition technologies such as a semiconductor igniter (SI) become infeasible for use in high-altitude relighting of jet engines. In this study, to generate a large spark kernel to achieve successful ignition with high-speed inlet airflow, a new type of multichannel plasma igniter (MCPI) is proposed. Experiments on the electrical char- acteristics of the MCPI and SI were conducted under normal and sub-atmospheric pressures (P = 10-100 kPa). Ignition experiments for the MCPI and SI with a kerosene/air mixture in a triple-swirler combustor under different velocities of inlet airflow (60-110 m/s), with a temperature of 473 K at standard atmospheric pressure, were investigated. Results show that the MCPI generates much more arc discharge energy than the SI under a constant pressure; for example, the MCPI generated 6.93% and 16.05 % more arc discharge energy than that of the SI at 30 kPa and 50 kPa, respectively. Compared to the SI, the MCPI generates a larger area and height of plasma heating zone, and induces a much larger initial spark kernel. Furthermore, the lean ignition limit of the MCPI and SI decreases with an increase in the velocity of the inlet airflow, and the maximum velocity of inlet airflow where the SI and MCPI can achieve successful and reliable ignition is 88.7 m/s and 102.2 m/s, respectively. Therefore, the MCPI has the advantage of achieving successful ignition with high-speed inlet airflow and extends the average ignition speed boundary of the kerosene/air mixture by 15.2%.展开更多
To increase the thrust-weight ratio in next-generation military aeroengines,a new integrated afterburner was designed in this study.The integrated structure of a combined strut–cavity–injector was applied to the aft...To increase the thrust-weight ratio in next-generation military aeroengines,a new integrated afterburner was designed in this study.The integrated structure of a combined strut–cavity–injector was applied to the afterburner.To improve ignition characteristics in the afterburner,a new method using a plasma jet igniter was developed and optimized for application in the integrated afterburner.The effects of traditional spark igniters and plasma jet igniters on ignition processes and ignition characteristics of afterburners were studied and compared with the proposed design.The experimental results show that the strut–cavity–injector combination can achieve stable combustion,and plasma ignition can improve ignition characteristics.Compared with conventional spark ignition,plasma ignition reduced the ignition delay time by 67 ms.Additionally,the ignition delay time was reduced by increasing the inlet velocity and reducing the excess air coefficient.This investigation provides an effective and feasible method to apply plasma ignition in aeroengine afterburners and has potential engineering applications.展开更多
High-temperature ignition is essential for the ignition and combustion of energetic metal fuels, including aluminum and magnesium particles which are protected by their high- melting-temperature oxides. A plasma torch...High-temperature ignition is essential for the ignition and combustion of energetic metal fuels, including aluminum and magnesium particles which are protected by their high- melting-temperature oxides. A plasma torch characterized by an ultrahigh-temperature plasma plume fulfills such high-temperature ignition conditions. A new steam plasma igniter is designed and successfully validated by aluminum power ignition and combustion tests. The steam plasma rapidly stabilizes in both plasma and steam jet modes. Parametric investigation of the steam plasma jet is conducted in terms of arc strength. A high-speed camera and an oscilloscope method visualize the discharge characteristics, and optical emission spectroscopy measures the thermochemical properties of the plasma jet. The diatomic molecule OH fitting method, the Boltzmann plot method, and short exposure capturing with an intensified charge coupled device record the axial distributions of the rotational gas temperature, excitation temperature, and OH radical distribution, respectively. The excitation temperature at the nozzle tip is near 5500 K, and the gas temperature is 5400 K.展开更多
In this paper,the characteristics of detonation combustion ignited by AC-driven non-thermal plasma and spark plug in air/acetylene mixture have been compared in a doubletube experiment system.The two tubes had the sam...In this paper,the characteristics of detonation combustion ignited by AC-driven non-thermal plasma and spark plug in air/acetylene mixture have been compared in a doubletube experiment system.The two tubes had the same structure,and their closed ends were installed with a plasma generator and a spark plug,respectively.The propagation characteristics of the flame were measured by pressure sensors and ion probes.The experiment results show that,compared with a spark plug,the non-thermal plasma obviously broadened the range of equivalence ratio when the detonation wave could develop successfully,it also heightened the pressure value of detonation wave.Meanwhile,the detonation wave development time and the entire flame propagation time were reduced by half.All of these advantages benefited from the larger ignition volume when a non-thermal plasma was applied.展开更多
The physical process of capillary discharge in a PE tube utilized in electro-thermal-chemical(ETC)guns was investigated.ETC guns can enhance the ignition and combustion of propellant in order to reduce the ignition de...The physical process of capillary discharge in a PE tube utilized in electro-thermal-chemical(ETC)guns was investigated.ETC guns can enhance the ignition and combustion of propellant in order to reduce the ignition delay and increase muzzle velocity of the projectile.A key component in ETC gun is the capillary plasma source.In this paper,a 2D steady state model of discharge was built by using magnetic hydrodynamics method.It took the plasma energy balance,material ablation,mass and momentum conservations in a quasi-neutral plasma region into account.Also,the effect of different compositions and PE concentration distribution were considered.In order to evaluate the validation of this model,the simulation results are compared with former works.展开更多
The electrical characteristics of an alternating current (AC) plasma igniter were investigated for a working gas of air at atmospheric pressure. The discharge voltage and current were measured in air in both breakdo...The electrical characteristics of an alternating current (AC) plasma igniter were investigated for a working gas of air at atmospheric pressure. The discharge voltage and current were measured in air in both breakdown and stable combustion processes, respectively, and the current-zero phenomena, voltage-current (V-I) characteristics were studied for different working gas flow rates. The results indicated that the working gas between anode and cathode could be ionized to generate gas discharge when the voltage reached 8 kV, and the maximum current was 33.36 A. When the current came to zero, current-zero phenomena appeared with duration of 2 #s. At the current-zero moment, dynamic resistance between electrodes became extremely high, and the maximum value could reach 445 kf~, which was the main factor to restrain the current. With increasing working gas flow rates, the gradient of V-I characteristic curves was increased, as was the dynamic resistance. At a constant driven power, the discharge voltage increased.展开更多
In order to achieve the target of reducing oil consumption to zero for pulverized coal(PC)boiler in power plant,the paper developed a novel coal pulverized ignition approach,called as Alternating-Current plasma(AC pla...In order to achieve the target of reducing oil consumption to zero for pulverized coal(PC)boiler in power plant,the paper developed a novel coal pulverized ignition approach,called as Alternating-Current plasma(AC plasma)ignition,with the advantages of excellent PC combustion behavior and longer electrode life-span.The scientific principle of how to generate the AC plasma arc was elaborated in detail.First,the experiments on life-span of electrodes inside AC plasma generator had been conducted,finding a workable way to extend its life-span beyond 530 hours.Second,a new AC plasma burner specifically designed for lean coal according to the principle of PC staged combustion had been illustrated with diagrams and then used to ignite the PC-air stream under four kinds of conditions with a varying AC plasma power from 150 kW to 300 kW,focusing on analyses of the influence of AC plasma power on combustion behaver,such as combustion temperature,carbon burnout rate as well as PC combustion regime.The following results showed that in the case of the power of the AC plasma was P=300 kW,a satisfied PC combustion process could achieved,with the average PC combustion temperature of about 940°C,combustion flame length of 6.3 m,and the total carbon burnout rate of up to 52.2%.In addition,about 80%of the nozzle outlet section was filled with bright flame,while 81%of the PC was in zone of the cylindrical flame regime.The PC combustion modes were changed repeatedly during the process of combustion,which went from homogeneous combustion mode at initial ignition stage to combined combustion mode and heterogeneous combustion mode at middle stage,finally to combined combustion mode at later stage.The research conclusion in this paper has proved that the AC plasma ignition approach is feasible and effective to ignite low-rank coal without the present of fuel oil.展开更多
A large-area high-power radio-frequency(RF) driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute(KAERI). The RF ion source consists of a dr...A large-area high-power radio-frequency(RF) driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute(KAERI). The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.展开更多
Renewed interest in the use of high-speed ramjets and scramjets and more efficient lean burning engines has led to many subsequent developments in the field of laser ignition for aerospace use and application.Demands ...Renewed interest in the use of high-speed ramjets and scramjets and more efficient lean burning engines has led to many subsequent developments in the field of laser ignition for aerospace use and application.Demands for newer,more advanced forms of ignition,are increasing as individuals strive to meet regulations that seek to reduce the level of pollutants in the atmosphere,such as CH_(x),NO_(x),and SO_(2).Many aviation gas turbine manufacturers are interested in increasing combustion efficiency in engines,all the while reducing the aforementioned pollutants.There is also a desire for a new generation of aircraft and spacecraft,utilizing technologies such as scramjet propulsion,which will never realize their fullest potential without the use of advanced ignition processes.These scenarios are all limited by the use of conventional spark ignition methods,thus leading to the desire to find new,alternative methods of ignition.This paper aims to provide the reader an overview of advanced ignition methods,with an emphasis on laser ignition and its applications to aerospace propulsion.A comprehensive review of advanced ignition systems in aerospace applications is performed.This includes studies on gas turbine applications,ramjet and scramjet systems,and space and rocket applications.A brief overview of ignition and laser ignition phenomena is also provided in earlier sections of the report.Throughout the reading,research papers,which were presented at the 2nd Laser Ignition Conference in April 2014,are mentioned to indicate the vast array of projects that are currenty being pursued.展开更多
Relight of jet engines at high altitude is difficult due to the relatively low pressure and temperature of inlet air.The penetration of initial flame kernel affects the ignition probability in the turbine engine combu...Relight of jet engines at high altitude is difficult due to the relatively low pressure and temperature of inlet air.The penetration of initial flame kernel affects the ignition probability in the turbine engine combustor greatly.In order to achieve successful ignition at high altitude,a deeper penetration of initial flame kernel should be generated.In this study,a Gliding Arc Plasma Jet Igniter(GAPJI)is designed to induce initial flame kernel with deeper penetration to achieve successful ignition at high altitude.The ignition performance of the GAPJI was demonstrated in a model combustor.It was found that GAPJI can generate plasma with deeper penetration up to 30.5 mm than spark igniter with 22.1 mm.The discharge power of GAPJI was positively correlated with flow rate of the carrier gas,approaching 200 W in average.Ignition experiments show that GAPJI has the advantage of extending the lean ignition limit.With GAPJI,the lean ignition limit of the combustor is 0.02 at 0 km,which is 55.6%less than that with spark igniter(0.045).The evolution of flame morphology was observed to explore the development of the flame kernel.It is shown that the advantage of a high penetration and continuous releasing energy can accelerate the ignition process and enhance combustion.展开更多
Measured highly elevated gains of proton–boron(HB11) fusion(Picciotto et al., Phys. Rev. X 4, 031030(2014))confirmed the exceptional avalanche reaction process(Lalousis et al., Laser Part. Beams 32, 409(2014); Hora e...Measured highly elevated gains of proton–boron(HB11) fusion(Picciotto et al., Phys. Rev. X 4, 031030(2014))confirmed the exceptional avalanche reaction process(Lalousis et al., Laser Part. Beams 32, 409(2014); Hora et al.,Laser Part. Beams 33, 607(2015)) for the combination of the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above 10^(20) cm s^(-2)for plasma blocks was theoretically and numerically predicted since 1978(Hora, Physics of Laser Driven Plasmas(Wiley, 1981), pp. 178 and 179) and measured(Sauerbrey, Phys. Plasmas 3, 4712(1996)) in exact agreement(Hora et al., Phys. Plasmas 14, 072701(2007)) when the dominating force was overcoming thermal processes. This is based on Maxwell's stress tensor by the dielectric properties of plasma leading to the nonlinear(ponderomotive) force f_(NL)resulting in ultra-fast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions(Labaune et al., Nature Commun.4, 2506(2013)).展开更多
基金National Natural Science Foundation of China(Grant No.91641204).
文摘In the extreme conditions of high altitude,low temperature,low pressure,and high speed,the aircraft engine is prone to flameout and difficult to start secondary ignition,which makes reliable ignition of combustion chamber at high altitude become a worldwide problem.To solve this problem,a kind of multichannel plasma igniter with round cavity is proposed in this paper,the three-channel and five-channel igniters are compared with the traditional ones.The discharge energy of the three igniters was compared based on the electric energy test and the thermal energy test,and ignition experiments was conducted in the simulated high-altitude environment of the component combustion chamber.The results show that the recessed multichannel plasma igniter has higher discharge energy than the conventional spark igniter,which can increase the conversion efficiency of electric energy from 26%to 43%,and the conversion efficiency of thermal energy from 25%to 73%.The recessed multichannel plasma igniter can achieve greater spark penetration depth and excitation area,which both increase with the increase of height.At the same height,the inlet flow helps to increase the penetration depth of the spark.The recessed multichannel plasma igniter can widen the lean ignition boundary,and the maximum enrichment percentage of lean ignition boundary can reach 31%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91541120,11472306,51336011,and 91641204)
文摘Relighting of jet engines at high altitudes is very difficult because of the high velocity, low pressure, and low tempera- ture of the inlet airflow. Successful ignition needs sufficient ignition energy to generate a spark kernel to induce a so-called critical flame initiation radius. However, at high altitudes with high-speed inlet airflow, the critical flame initiation radius becomes larger; therefore, traditional ignition technologies such as a semiconductor igniter (SI) become infeasible for use in high-altitude relighting of jet engines. In this study, to generate a large spark kernel to achieve successful ignition with high-speed inlet airflow, a new type of multichannel plasma igniter (MCPI) is proposed. Experiments on the electrical char- acteristics of the MCPI and SI were conducted under normal and sub-atmospheric pressures (P = 10-100 kPa). Ignition experiments for the MCPI and SI with a kerosene/air mixture in a triple-swirler combustor under different velocities of inlet airflow (60-110 m/s), with a temperature of 473 K at standard atmospheric pressure, were investigated. Results show that the MCPI generates much more arc discharge energy than the SI under a constant pressure; for example, the MCPI generated 6.93% and 16.05 % more arc discharge energy than that of the SI at 30 kPa and 50 kPa, respectively. Compared to the SI, the MCPI generates a larger area and height of plasma heating zone, and induces a much larger initial spark kernel. Furthermore, the lean ignition limit of the MCPI and SI decreases with an increase in the velocity of the inlet airflow, and the maximum velocity of inlet airflow where the SI and MCPI can achieve successful and reliable ignition is 88.7 m/s and 102.2 m/s, respectively. Therefore, the MCPI has the advantage of achieving successful ignition with high-speed inlet airflow and extends the average ignition speed boundary of the kerosene/air mixture by 15.2%.
基金supported by National Natural Science Foundation of China(Nos.51806245 and 51436008)the Science and Technology Projects of Shaanxi Province(No.2020JM-349)。
文摘To increase the thrust-weight ratio in next-generation military aeroengines,a new integrated afterburner was designed in this study.The integrated structure of a combined strut–cavity–injector was applied to the afterburner.To improve ignition characteristics in the afterburner,a new method using a plasma jet igniter was developed and optimized for application in the integrated afterburner.The effects of traditional spark igniters and plasma jet igniters on ignition processes and ignition characteristics of afterburners were studied and compared with the proposed design.The experimental results show that the strut–cavity–injector combination can achieve stable combustion,and plasma ignition can improve ignition characteristics.Compared with conventional spark ignition,plasma ignition reduced the ignition delay time by 67 ms.Additionally,the ignition delay time was reduced by increasing the inlet velocity and reducing the excess air coefficient.This investigation provides an effective and feasible method to apply plasma ignition in aeroengine afterburners and has potential engineering applications.
基金supported by the Defense Acquisition Program Administration and Agency for Defense Development under the contract UD110095CDsupported by the Advanced Research Center Program(NRF-2013R1A5A1073861) through the National Research Foundation of Korea(NRF) grant funded by the Korean government(MSIP) contracted through the Advanced Space Propulsion Research Center at Seoul National University
文摘High-temperature ignition is essential for the ignition and combustion of energetic metal fuels, including aluminum and magnesium particles which are protected by their high- melting-temperature oxides. A plasma torch characterized by an ultrahigh-temperature plasma plume fulfills such high-temperature ignition conditions. A new steam plasma igniter is designed and successfully validated by aluminum power ignition and combustion tests. The steam plasma rapidly stabilizes in both plasma and steam jet modes. Parametric investigation of the steam plasma jet is conducted in terms of arc strength. A high-speed camera and an oscilloscope method visualize the discharge characteristics, and optical emission spectroscopy measures the thermochemical properties of the plasma jet. The diatomic molecule OH fitting method, the Boltzmann plot method, and short exposure capturing with an intensified charge coupled device record the axial distributions of the rotational gas temperature, excitation temperature, and OH radical distribution, respectively. The excitation temperature at the nozzle tip is near 5500 K, and the gas temperature is 5400 K.
基金supported by National Natural Science Foundation of China(No.51176001)
文摘In this paper,the characteristics of detonation combustion ignited by AC-driven non-thermal plasma and spark plug in air/acetylene mixture have been compared in a doubletube experiment system.The two tubes had the same structure,and their closed ends were installed with a plasma generator and a spark plug,respectively.The propagation characteristics of the flame were measured by pressure sensors and ion probes.The experiment results show that,compared with a spark plug,the non-thermal plasma obviously broadened the range of equivalence ratio when the detonation wave could develop successfully,it also heightened the pressure value of detonation wave.Meanwhile,the detonation wave development time and the entire flame propagation time were reduced by half.All of these advantages benefited from the larger ignition volume when a non-thermal plasma was applied.
文摘The physical process of capillary discharge in a PE tube utilized in electro-thermal-chemical(ETC)guns was investigated.ETC guns can enhance the ignition and combustion of propellant in order to reduce the ignition delay and increase muzzle velocity of the projectile.A key component in ETC gun is the capillary plasma source.In this paper,a 2D steady state model of discharge was built by using magnetic hydrodynamics method.It took the plasma energy balance,material ablation,mass and momentum conservations in a quasi-neutral plasma region into account.Also,the effect of different compositions and PE concentration distribution were considered.In order to evaluate the validation of this model,the simulation results are compared with former works.
基金supported by National Natural Science Foundation of China(Nos.50776100,51106179)
文摘The electrical characteristics of an alternating current (AC) plasma igniter were investigated for a working gas of air at atmospheric pressure. The discharge voltage and current were measured in air in both breakdown and stable combustion processes, respectively, and the current-zero phenomena, voltage-current (V-I) characteristics were studied for different working gas flow rates. The results indicated that the working gas between anode and cathode could be ionized to generate gas discharge when the voltage reached 8 kV, and the maximum current was 33.36 A. When the current came to zero, current-zero phenomena appeared with duration of 2 #s. At the current-zero moment, dynamic resistance between electrodes became extremely high, and the maximum value could reach 445 kf~, which was the main factor to restrain the current. With increasing working gas flow rates, the gradient of V-I characteristic curves was increased, as was the dynamic resistance. At a constant driven power, the discharge voltage increased.
基金supported by the national natural science foundation of china(Contract No.51806132)doctor start-up capital of Shanxi University(No.20174462)。
文摘In order to achieve the target of reducing oil consumption to zero for pulverized coal(PC)boiler in power plant,the paper developed a novel coal pulverized ignition approach,called as Alternating-Current plasma(AC plasma)ignition,with the advantages of excellent PC combustion behavior and longer electrode life-span.The scientific principle of how to generate the AC plasma arc was elaborated in detail.First,the experiments on life-span of electrodes inside AC plasma generator had been conducted,finding a workable way to extend its life-span beyond 530 hours.Second,a new AC plasma burner specifically designed for lean coal according to the principle of PC staged combustion had been illustrated with diagrams and then used to ignite the PC-air stream under four kinds of conditions with a varying AC plasma power from 150 kW to 300 kW,focusing on analyses of the influence of AC plasma power on combustion behaver,such as combustion temperature,carbon burnout rate as well as PC combustion regime.The following results showed that in the case of the power of the AC plasma was P=300 kW,a satisfied PC combustion process could achieved,with the average PC combustion temperature of about 940°C,combustion flame length of 6.3 m,and the total carbon burnout rate of up to 52.2%.In addition,about 80%of the nozzle outlet section was filled with bright flame,while 81%of the PC was in zone of the cylindrical flame regime.The PC combustion modes were changed repeatedly during the process of combustion,which went from homogeneous combustion mode at initial ignition stage to combined combustion mode and heterogeneous combustion mode at middle stage,finally to combined combustion mode at later stage.The research conclusion in this paper has proved that the AC plasma ignition approach is feasible and effective to ignite low-rank coal without the present of fuel oil.
基金supported by the Ministry of Science,ICT and Future Planning of the Republic of Korea under the ITER Technology R&D ProgramNational R&D Program Through the National Research Foundation of Korea(NRF)Funded by the Ministry of Science,ICT&Future Planning(NRF-2014M1A7A1A03045372)
文摘A large-area high-power radio-frequency(RF) driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute(KAERI). The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.
文摘Renewed interest in the use of high-speed ramjets and scramjets and more efficient lean burning engines has led to many subsequent developments in the field of laser ignition for aerospace use and application.Demands for newer,more advanced forms of ignition,are increasing as individuals strive to meet regulations that seek to reduce the level of pollutants in the atmosphere,such as CH_(x),NO_(x),and SO_(2).Many aviation gas turbine manufacturers are interested in increasing combustion efficiency in engines,all the while reducing the aforementioned pollutants.There is also a desire for a new generation of aircraft and spacecraft,utilizing technologies such as scramjet propulsion,which will never realize their fullest potential without the use of advanced ignition processes.These scenarios are all limited by the use of conventional spark ignition methods,thus leading to the desire to find new,alternative methods of ignition.This paper aims to provide the reader an overview of advanced ignition methods,with an emphasis on laser ignition and its applications to aerospace propulsion.A comprehensive review of advanced ignition systems in aerospace applications is performed.This includes studies on gas turbine applications,ramjet and scramjet systems,and space and rocket applications.A brief overview of ignition and laser ignition phenomena is also provided in earlier sections of the report.Throughout the reading,research papers,which were presented at the 2nd Laser Ignition Conference in April 2014,are mentioned to indicate the vast array of projects that are currenty being pursued.
基金co-supported by the National Natural Science Foundation of China (Nos. 51807204 and 91941301)the Postdoctoral Research Foundation of China (No. 2019M663719)the National Science and Technology Major Project, China (No. 2017-Ⅲ-0007-0033)
文摘Relight of jet engines at high altitude is difficult due to the relatively low pressure and temperature of inlet air.The penetration of initial flame kernel affects the ignition probability in the turbine engine combustor greatly.In order to achieve successful ignition at high altitude,a deeper penetration of initial flame kernel should be generated.In this study,a Gliding Arc Plasma Jet Igniter(GAPJI)is designed to induce initial flame kernel with deeper penetration to achieve successful ignition at high altitude.The ignition performance of the GAPJI was demonstrated in a model combustor.It was found that GAPJI can generate plasma with deeper penetration up to 30.5 mm than spark igniter with 22.1 mm.The discharge power of GAPJI was positively correlated with flow rate of the carrier gas,approaching 200 W in average.Ignition experiments show that GAPJI has the advantage of extending the lean ignition limit.With GAPJI,the lean ignition limit of the combustor is 0.02 at 0 km,which is 55.6%less than that with spark igniter(0.045).The evolution of flame morphology was observed to explore the development of the flame kernel.It is shown that the advantage of a high penetration and continuous releasing energy can accelerate the ignition process and enhance combustion.
文摘Measured highly elevated gains of proton–boron(HB11) fusion(Picciotto et al., Phys. Rev. X 4, 031030(2014))confirmed the exceptional avalanche reaction process(Lalousis et al., Laser Part. Beams 32, 409(2014); Hora et al.,Laser Part. Beams 33, 607(2015)) for the combination of the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above 10^(20) cm s^(-2)for plasma blocks was theoretically and numerically predicted since 1978(Hora, Physics of Laser Driven Plasmas(Wiley, 1981), pp. 178 and 179) and measured(Sauerbrey, Phys. Plasmas 3, 4712(1996)) in exact agreement(Hora et al., Phys. Plasmas 14, 072701(2007)) when the dominating force was overcoming thermal processes. This is based on Maxwell's stress tensor by the dielectric properties of plasma leading to the nonlinear(ponderomotive) force f_(NL)resulting in ultra-fast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions(Labaune et al., Nature Commun.4, 2506(2013)).