ANISOTROPIC PLASTIC STRESS FIELDS AT A SLOWLY PROPAGATING CRACK TIP

Under the condition that any perfeetly plastic stress components at a crack tip are nothing but the Junctions of 0 only, making use of equilibriumequations,Hill ani.sutropic yield condition and unloading stress-strain relations, in this paper, we derive the general analytical expressions of anisotropic plastiestress Jields at the slowly steadyhe slowly steady propagatin tips of plane and anti-phane strain,Applying these general analytical expressions to the concrete cracks the attchvtical expressions of anisotropie plastic stress fields at the slowly steady propagating tips of Motle I and Motle III cracks are obtained. For the isolropic plastic material, the anisotropic plastic stress fields at a slowly propagating crack tip become the perfeeby plastic mress fields

Dendritic nanoarchitecture imparts ZSM-5 zeolite with enhanced adsorption and catalytic performance in energy applications

The development of zeolites possessing dendritic features represents a great opportunity for the design of novel materials with applications in a large variety of fields and,in particular,in the energy sector to afford its transition towards a low carbon system.In the current work,ZSM-5 zeolite showing a dendritic3D nanoarchitecture has been synthesized by the functionalization of protozeolitic nanounits with an amphiphilic organosilane,which provokes the branched aggregative growth of zeolite embryos.Dendritic ZSM-5 exhibits outstanding accessibility arising from a highly interconnected network of radially-oriented mesopores(3-10 nm)and large cavities(20-80 nm),which add to the zeolitic micropores,thus showing a well-defined trimodal pore size distribution.These singular features provide dendritic ZSM-5 with sharply enhanced performance in comparison with nano-and hierarchical reference materials when tested in a number of energy related applications,such as VOCs(toluene)adsorption(improved capacity),plastics(low-density polyethylene)catalytic cracking(boosted activity)and hydrogen production by methane catalytic decomposition(higher activity and deactivation resistance).

Microstructure-fracture toughness relationships and toughening mechanism of TC21 titanium alloy with lamellar microstructure

The independent influence of microstructural features on fracture toughness of TC21alloy with lamellar microstructure was investigated.Triple heat treatments were designed to obtain lamellar microstructures with different parameters,which were characterized by OM and SEM.The size and content ofαplates were mainly determined by cooling rate from singleβphase field and solution temperature in two-phase field;while the precipitation behavior of secondaryαplatelets was dominantly controlled by aging temperature in two-phase field.The content and thickness ofαplates and the thickness of secondaryαplatelets were important microstructural features influencing the fracture toughness.Both increasing the content ofαplates and thickeningαplates(or secondaryαplatelets)could enhance the fracture toughness of TC21alloy.Based on energy consumption by the plastic zone of crack tip inαplates,a toughening mechanism for titanium alloys was proposed.

Fractographic analysis of the overload effect on fatigue crack growth in 2024-T3 and 7075-T6 Al alloys

The effect of single overload on the fatigue crack growth in 2024-T3 and 7075-T6 Al alloys was analyzed.Fatigue tests under constantamplitude loading with overload peak were carried out on V-notched specimens.Fractographic analysis was used as a principal approach to explain the crack growth retardation due to the overload.Scanning electron microscopy(SEM)analyses were conducted on the fractured surface of failed specimens to study the retardation effect.The obtained results show that the overload application generates a plastic zone in both aluminum alloys.The generated plastic zone is three times larger in the case of 2024-T3 compared to 7075-T6,and thus,a significant crack retardation was induced for 2024-T3.The retardation effect due to the overload for 2024-T3 and 7075-T6 lasted for about 10 mm and 1 mm,respectively,from the point of overload application.

Optimisation Method for Determination of Crack Tip Position Based on Gauss-Newton Iterative Technique

In the digital image correlation research of fatigue crack growth rate,the accuracy of the crack tip position determines the accuracy of the calculation of the stress intensity factor,thereby affecting the life prediction.This paper proposes a Gauss-Newton iteration method for solving the crack tip position.The conventional linear fitting method provides an iterative initial solution for this method,and the preconditioned conjugate gradient method is used to solve the ill-conditioned matrix.A noise-added artificial displacement field is used to verify the feasibility of the method,which shows that all parameters can be solved with satisfactory results.The actual stress intensity factor solution case shows that the stress intensity factor value obtained by the method in this paper is very close to the finite element result,and the relative error between the two is only−0.621%;The Williams coefficient obtained by this method can also better define the contour of the plastic zone at the crack tip,and the maximum relative error with the test plastic zone area is−11.29%.The relative error between the contour of the plastic zone defined by the conventional method and the area of the experimental plastic zone reached a maximum of 26.05%.The crack tip coordinates,stress intensity factors,and plastic zone contour changes in the loading and unloading phases are explored.The results show that the crack tip change during the loading process is faster than the change during the unloading process;the stress intensity factor during the unloading process under the same load condition is larger than that during the loading process;under the same load,the theoretical plastic zone during the unloading process is higher than that during the loading process.

A model of crack based on dislocations in smectic A liquid crystals

A plastic crack model for smectic A liquid crystals under longitudinal shear is suggested. The solution of the screw dislocation in smectic A is the key to the correct result that we obtained by overcoming a longstanding puzzle. We further use the dislocation pile-up principle and the singular integral equation method to construct the solution of the crack in the phase. From the solution, we can determine the size of the plastic zone at the crack tip and the crack tip opening （tearing） displacement, which are the parameters relevant to the local stability/instability of materials. Our results may be useful for developing soft-matter mechanics.

Assessment of Elasticity,Plasticity and Resistance to Machining-induced Damage of Porous Pre-sintered Zirconia Using Nanoindentation Techniques

Porous pre-sintered zirconia is subject to white machining during which its elasticity, plasticity and resistance to machining-induced damage determine its machinability and final quality. This study used nanoindentation techniques and the Sakai＇s series elastic and plastic deformation model to extract the resistance to plastic deformation from the plane strain modulus and the contact hardness for presintered zirconia. The modulus and the resistance to plasticity were used to calculate the relative amount of elasticity and plasticity. The fracture energy and the normalized indentation absorbed energy were used to deconvolute the resistance to machining-induced cracking based on the Sakai-Nowak model. All properties were extracted at a 10 mN peak load and loading rates of 0.1-2 mN/s to determine the loading rate effects on these properties. We found that the resistance to plasticity and the resistance to machining-induced cracking were independent of the loading rate （ANOVA, p 〉 0.05）. The elastic and plastic displacements depended on the loading rate through power laws. This loading rate-dependent deformation behaviour was explained by the maximum shear stress generated underneath the indenter and the indentation energy. The plastic deformation components and the indentation absorbed energy at all loading rates were higher than the elastic deformation components and the elastic strain energy, respectively. Finally, we established the linkage among the pore structure, indentation behaviour and machinability of pre-sintered zirconia.