Degradability of biodegradable plastic films and its mulching effects on soil temperature and maize yield in northeastern China

Plastic film is an important resource in agricultural production,but it takes hundreds of years to degrade completely in natural environment.The large-scale use of plastic film will inevitably lead to serious environmental pollution.One way to solve the problem is to develop a substitutable mulching film,such as a biodegradable film that can ultimately be decomposed to water,carbon dioxide,and soil organic matter by micro-organisms.In this study,a 2-year experiment was conducted to determine the degradation properties of a biodegradable plastic film,including degradation rate,surface microstructure,tensile strength and elongation at break,and the effects of different mulching treatments on soil temperature and maize yield.The mulching experiment was conducted with three different biodegradable plastic films with different degradation rates,using a common plastic film and a non-mulched treatment as control.With the addition of the additives for degradation in the biodegradable plastic films,the degradation rates increased significantly,which were 7.2%-17.8%in 2017 and 18.1%-35.2%in 2018 after maize harvesting.However,the degradation occurred mainly on the ridge side.The decrease in tensile strength and elongation was proportional to the degradation rate of the degradable film.The SEM results indicated that the surface microstructures of the biodegradable films were loose and heterogeneous after maize harvesting.Biodegradable plastic film mulching increased the soil temperature at soil depths of 5 cm,15 cm,and 25 cm,over the maize’s entire growth period,by 3.1℃-3.2℃ in 2017 and 1.2℃-2.1℃ in 2018 compared with the non-mulched treatment.The biodegradable plastic film increased the maize yield by 10.4%-14.3%in 2017 and 11.6%-24.7%in 2018.The soil temperature and maize yield increases were statistically significant;however,with respect to maize qualities,there were no statistically significant increases among the five treatments.This study shows that biodegradable plastic film can be used as a substitute for common plastic film.However,the ingredients in biodegradable plastic films should be improved further to ensure that they can be degraded completely after crop harvest.

Improving maize growth and development simulation by integrating temperature compensatory effect under plastic film mulching into the AquaCrop model

Temperature compensatory effect, which quantifies the increase in cumulative air temperature from soil temperature increase caused by mulching, provides an effective method for incorporating soil temperature into crop models. In this study, compensated temperature was integrated into the AquaCrop model to investigate the capability of the compensatory effect to improve assessment of the promotion of maize growth and development by plastic film mulching(PM). A three-year experiment was conducted from2014 to 2016 with two maize varieties(spring and summer) and two mulching conditions(PM and non-mulching(NM)), and the AquaCrop model was employed to reproduce crop growth and yield responses to changes in NM, PM, and compensated PM. A marked difference in soil temperature between NM and PM was observed before 50 days after sowing(DAS) during three growing seasons. During sowing–emergence and emergence–tasseling, the increase in air temperature was proportional to the compensatory coefficient, with spring maize showing a higher compensatory temperature than summer maize. Simulation results for canopy cover(CC) were generally in good agreement with the measurements, whereas predictions of aboveground biomass and grain yield under PM indicated large underestimates from 60 DAS to the end of maturity. Simulations of spring maize biomass and yield showed general increase based on temperature compensation, accompanied by improvement in modeling accuracy, with RMSEs decreasing from 2.5 to 1.6 t ha^(-1)and from 4.1 t to 3.4 t ha^(-1). Improvement in biomass and yield simulation was less pronounced for summer than for spring maize, implying that crops grown during low-temperature periods would benefit more from the compensatory effect. This study demonstrated the effectiveness of the temperature compensatory effect to improve the performance of the AquaCrop model in simulating maize growth under PM practices.

Can soil organic carbon sequestration and the carbon management index be improved by changing the film mulching methods in the semiarid region?

Plastic film mulching has been widely used to increase maize yield in the semiarid area of China.However, whether long-term plastic film mulching is conducive to agricultural sustainability in this region remains controversial.A field experiment was initiated in 2013 with five different film mulching methods:(i) control method, flat planting without mulching (CK),(ii) flat planting with half film mulching (P),(iii) film mulching on ridges and planting in narrow furrows(S),(iv) full film mulching on double ridges (D), and (v) film mulching on ridges and planting in wide furrows (R).The effects on soil organic carbon (SOC) content, storage, and fractions, and on the carbon management index (CMI)were evaluated after nine consecutive years of plastic film mulching.The results showed that long-term plastic film mulching generally maintained the initial SOC level.Compared with no mulching, plastic film mulching increased the average crop yield, biomass yield, and root biomass by 48.38, 35.06, and 37.32%, respectively, which led to the improvement of SOC sequestration.Specifically, plastic film mulching significantly improved CMI, and increased the SOC content by 13.59%, SOC storage by 7.47%and easily oxidizable organic carbon (EOC) by 13.78%on average,but it reduced the other labile fractions.SOC sequestration and CMI were improved by refining the plastic film mulching methods.The S treatment had the best effect among the four mulching methods, so it can be used as a reasonable film mulching method for sustainable agricultural development in the semiarid area.

Analysis of Phthalate Esters in Air, Soil and Plants in Plastic Film Greenhouse

The phthalate esters such as DMP, DEP, DBP and DEHP in air, soil and plant samples in plastic film greenhouse were clean up with fine silica gel column and determined with HPLC. It was found that the concentrations of PEs in air and soil samples in plastic film greenhouse are much higher than those of contrast samples. But concentrations of PEs in plants in plastic film greenhouse are not remarkably affected by the pollution of air and soil.

Effects of plastic film mulching on soil greenhouse gases(CO2,CH4 and N2O) concentration within soil profiles in maize fields on the Loess Plateau,China

To better understand the effects of plastic film mulching on soil greenhouse gases（GHGs） emissions,we compared seasonal and vertical variations of GHG concentrations at seven soil depths in maize（Zea mays L.） fields at Changwu station in Shaanxi,a semi-humid region,between 2012 and 2013.Gas samples were taken simultaneously every one week from non-mulched（BP） and plastic film-mulched（FM） field plots.The results showed that the concentration of GHGs varied distinctly at the soil-atmosphere interface and in the soil profile during the maize growing season（MS）.Both carbon dioxide（CO_2） and nitrous oxide（N_2O） concentrations increased with increasement of soil depth,while the methane（CH_4）concentrations decreased with increasement of soil depth.A strong seasonal variation pattern was found for CO_2 and N_2O concentrations,as compared to an inconspicuous seasonal variation of CH_4 concentrations.The mean CO_2 and N_2O concentrations were higher,but the mean CH_4 concentration in the soil profiles was lower in the FM plots than in the BP plots.The results of this study suggested that plastic film mulching significantly increased the potential emissions of CO_2and N_2O from the soil,and promoted CH_4 absorption by the soil,particularly during the MS.

Response of carbon footprint to plastic film mulch application in spring maize production and mitigation strategy

Producing more food with a lower environmental cost is one of the most crucial challenges worldwide. Plastic mulching has developed as one of the most dominant practices to improve crop yields, however its impacts on greenhouse gas(GHG) emissions during the production life cycle of a crop are still unclear. The objective of this work is to quantify the impacts of plastic film on GHG emissions and to reduce GHG emissions with innovative agronomic practices. Carbon footprint per unit of area(CFa), per unit of maize grain yield(CFy), and per unit of economic output(CFe) were evaluated for three maize cultivation systems: a no mulch system, a conventional plastic mulching system(PM) and a biennial plastic mulching pattern, namely a ’one film for 2 years’ system(PM2), during 2015–2018 in a maize field located on the Loess Plateau of China. The results suggested that PM induced a 24% improvement in maize yields during the four experimental years compared to a no-mulch treatment(NM). However, PM dramatically increased the CFa by 69%, 59% of which was created by the input of the plastic film material, and 10% was created by increases in the soil N2O emissions. The yield improvements from PM could not offset the increases in CFa, and CFy and CFe were both increased by 36%. Shifting from PM to PM2 did not reduce crop yields, but it led to a 21% reduction in CFa and 23% reductions in CFy and CFe due to the reduced input amount of plastic film, decreased soil N2O emissions, and less diesel oil used for tillage. Compared to NM, CFy and CFe were only 5% higher in PM2. This study highlights the necessity of reducing the amount of plastic film input in the development of low-carbon agriculture and shifting from conventional PM cultivation to PM2 could be an efficient option for mitigating GHG emissions while sustaining high crop yields in plastic mulched fields.

Effects of plastic mulching film-induced leaf burning on seedling growth in tobacco cultivation:Different findings beyond conservation view

Solving high-temperature plastic mulching film-induced leaf burning in the first week during tobacco cultivation would take much time and effort. In the present study, the growth as well as the leaf sugar and nicotine contents of seedlings with or without leaf burning induced by high-temperature plastic mulching film were tested at two independent sites in 2015 and 2016 to identify the influence of leaf burning on seedling growth. The results showed that the growth of seedlings with leaf burning was improved with increased leaf area, leaf number and plant height compared to those without leaf burning, combined with an increased seedling survival rate at two sites in two years. In seedlings with leaf burning, the contents of fructose and glucose increased and peaked at 11：00 and 13：00 in the leaf and root, respectively, with an increased root nicotine content beginning at 13：00, highlighting the signalling role of sugars. Activities of antioxidant enzymes including peroxidase （POD）, superoxide dismutase （SOD） and catalase （CAT） were all increased in seedlings with leaf burning. More plant biomass was allocated to roots in seedlings with leaf burning with increased root volume compared to control seedlings, which might facilitate the absorption of water and nutrients from the soil. Our findings demonstrate that high-temperature plastic mulching film-induced leaf burning not inhibited but benefited seedling survival and growth, suggesting that the time and labour-consuming manual plucking of burnt leaves can be avoided during tobacco cultivation.

Effect of Plasticizers on Properties of Rice Straw Fiber Film

In order to improve the properties of rice straw fiber film, one factor contrast test method was employed. Plasticizer type was chosen as input variable, dry tension strength and elongation, wet tension strength and elongation, bursting strength and tearing strength were chosen as indexes. The results showed that there were significant differences among the means of dry tension strength, dry elongation and bursting strength of different plasticizers; there were not significant differences among the means of wet tension strength, wet elongation and tearing strength of different plasticizers; for dry tension strength and elongation, glycerol had a significant difference with sorbitol and PEG, no significant difference was observed between sorbitol and PEG, dry tension strength added glycerol had been reduced 6.8% compared with that added sorbitol, reduced 9.5% compared with that added PEG; elongation had been improved 6.1% and 9.4%, respectively; for bursting strength, sorbitol had a significant difference with glycerol and PEG, no significant difference was observed between glycerol and PEG; bursting strength added glycerol and added PEG had been improved 6.9% and 5.6%, respectively compared with that of the added sorbitol. The results provided a theoretical reference for further improving the straw fiber film manufacturing process.

Bauschinger and size effects in thin-film plasticity due to defect-energy of geometrical necessary dislocations

The Bauschinger and size effects in the thinfilm plasticity theory arising from the defect-energy of geometrically necessary dislocations （GNDs） are analytically investigated in this paper. Firstly, this defect-energy is deduced based on the elastic interactions of coupling dislocations （or pile-ups） moving on the closed neighboring slip plane. This energy is a quadratic function of the GNDs density, and includes an elastic interaction coefficient and an energetic length scale L. By incorporating it into the work- conjugate strain gradient plasticity theory of Gurtin, an energetic stress associated with this defect energy is obtained, which just plays the role of back stress in the kinematic hardening model. Then this back-stress hardening model is used to investigate the Bauschinger and size effects in the tension problem of single crystal Al films with passivation layers. The tension stress in the film shows a reverse dependence on the film thickness h. By comparing it with discrete-dislocation simulation results, the length scale L is determined, which is just several slip plane spacing, and accords well with our physical interpretation for the defect- energy. The Bauschinger effect after unloading is analyzed by combining this back-stress hardening model with a friction model. The effects of film thickness and pre-strain on the reversed plastic strain after unloading are quantified and qualitatively compared with experiment results.

The technology and mechanism of removal of plastic mulch and land preparation

In this article,the characteristic of the field plastic mulch, the craft for mechanization removal and land preparation of plastic mulch and the mechanism frequently used in the removal and land preparation of plastic mulch were introduced, which offered references for the design of removal mechanism and land preparation of plastic mulch and structural optimization combination of working components.

Practice and Exploration of Scientific Recycling of Agricultural Plastic Film in Nanchong City

Nanchong City is a major grain production city in Sichuan Province.The annual use of agricultural plastic film for grain and oil crop production and the amount of waste agricultural plastic film produced are very large.How to properly recycle agricultural plastic film and reduce the non-point source pollution of agricultural plastic film to agricultural environment has become an unavoidable subject of agricultural production in Nanchong City.In recent years,the scientific recycling of agricultural plastic film in Nanchong City has made great achievement.On the basis of statistical survey,this paper elaborated the main methods and results achieved,analyzed the existing problems,and came up with recommendations for the future work,in the hope of providing a reference for strengthening agricultural plastic film recycling in similar situations.

Design of New Farm Machine for Chopping Field Straw,Pressing it into Soil and Cleaning up Plastic Film

In this paper,we design a farm machine integrating the functions of chopping field straw,pressing field straw into soil,breaking stubble,and cleaning up plastic film,in order to improve the efficiency of plastic film cleaning,enrich the function of straw chopping equipment,reduce the noise generated at work,and further realize the intelligent harmony. The remote control button is used to control the work of the entire system,and the bluetooth remote control module and matrix keyboard are used to control the vehicle. With STM32 microcontroller as the main control chip,the machine controls the motion of the electric motor by relay,and employs LCD screen to realize real-time display of system work. It is convenient and easy to operate,with good human-computer interaction.

Effects of Plastic Film Mulching on Soil Carbon Fixation Capacity and Fertility Level in Eastern Qinghai

[Objectives]To explore the effects of single application of chemical fertilizers on soil carbon fixation capacity and soil fertility under plastic film mulching conditions in eastern Qinghai,and to provide a theoretical basis for realizing the sustainable development of film mulching planting method in this area.[Methods]The effects of single application of chemical fertilizer cultivation mode under film mulching conditions on the soil organic carbon(SOC),labile organic carbon(LOC),carbon management index(CMI),extractable humus carbon(CHE),humic acid carbon(CHA),and fulvic acid carbon(CFA)in the cultivated layer(0-20 cm)were studied through three consecutive years of field experiments on dryland maize farmland in the eastern Qinghai.[Results]Under the film mulching condition,the SOC,LOC and CMI of the single application of chemical fertilizer cultivation mode were lower than that of the open field control.CHE,CHA and CFA increased with the increase of planting years,but the degree of increase was generally less than that of the open field control.With the increase of planting years,by 2020,the soil LOC/SOC value of film mulching decreased by 4.97%compared with before the start of the experiment,while the open field control increased by 1.11%;the organic carbon oxidation stability coefficient(KOS)of the film mulching was higher than that of the open field control;the soil CHA/CFA value and PQ value were higher than that of the open field control.[Conclusions]Under the condition of single application of chemical fertilizers,the continuous film mulching cultivation mode reduces the soil carbon fixation capacity,and soil organic carbon tends to be stable,which is not conducive to biological utilization and could reduce the soil fertility and degrade the soil quality,causing adverse effects on the stability of crop yield and sustainable production in the long run.

Indenter size effect on the reversible incipient plasticity of Al(001) surface:Quasicontinuum study

Indenter size effect on the reversible incipient plasticity of Al(001) surface is studied by quasicontinuum simulations.Results show that the incipient plasticity under small indenter, the radius of which is less than ten nanometers, is dominated by a simple planar fault defect that can be fully removed after withdrawal of the indenter; otherwise, irreversible incipient plastic deformation driven by a complex dislocation activity is preferred, and the debris of deformation twins, dislocations,and stacking fault ribbons still remain beneath the surface when the indenter has been completely retracted. Based on stress distributions calculated at an atomic level, the reason why the dislocation burst instead of a simple fault ribbon is observed under a large indenter is the release of the intensely accumulated shear stress. Finally, the critical load analysis implies that there exists a reversible-irreversible transition of incipient plasticity induced by indenter size. Our findings provide a further insight into the incipient surface plasticity of face-centered-cubic metals in nano-sized contact issues.

Better tillage selection before ridge–furrow film mulch can facilitate root proliferation, and increase nitrogen accumulation,translocation and grain yield of maize in a semiarid area

Plastic film mulch systems are used widely in arid areas, and the associated tillage measures affect soil properties, root and crop growth, and nutrient uptake. However, much debate surrounds the most suitable tillage method for plastic film mulch systems. We conducted a two-year field experiment to explore the impact of three tillage treatments-rotary tillage before ridge–furrow plastic film mulch(MR), no-tillage before ridge–furrow plastic film mulch(MZ), and plow tillage before ridge–furrow plastic film mulch(MP)-on soil total nitrogen, available nitrogen, root stratification structure,nitrogen transfer and utilization, and maize yield. The results showed that MP had better soil quality than either MR or MZ over 2019 and 2020, with higher nitrate-nitrogen and total nitrogen in the 0–40 cm soil layer. MP improved the soil physicochemical properties more than the other treatments, producing significantly higher root numbers and root biomass for the aerial and underground nodal roots than MR and MZ. At harvest, MP had the highest root biomass density,root length density, and root surface area density in the different soil layers(0–20, 20–40, and 0–40 cm). Significant correlations occurred between root biomass and aboveground nitrogen accumulation during maize growth. During grain filling, MP had the greatest nitrogen transfer amount, significantly increasing root and aboveground nitrogen transfer by 19.63–45.82% and 11.15–24.56%, respectively, relative to the other treatments. MP significantly produced 1.36–26.73%higher grain yields and a higher grain crude protein content at harvest than MR and MZ. MP also had higher values for the nitrogen harvest index, nitrogen uptake efficiency, and partial factor productivity of nitrogen fertilizer than MR and MZ.In conclusion, plow tillage combined with a ridge–furrow plastic film mulch system facilitated maize root development and improved nitrogen utilization, thereby increasing maize yield more than the other treatments.

Agronomic performances of biodegradable and non-biodegradable plastic film mulching on a maize cropping system in the semi-arid Loess Plateau,China

Biodegradable plastic film mulch (PFM) is considered an alternative to non-biodegradable PFM to mitigate the negative impacts of residual film.However,the agronomic performance of biodegradable PFM in comparison to non-biodegradable PFM still needs to be tested.In this study,we evaluated the effects of biodegradable and non-biodegradable PFM on soil physicochemical properties,microbial community,and enzyme activities,as well as maize growth performance.Biodegradable and non-biodegradable PFM both increased soil temperature,water content,N content,and microbial biomass and maize yield by up to 30%,but decreased soil enzyme activities as compared to no mulching (control,CK).Most soil physicochemical properties,microbial community,and enzyme activities were similar under non-biodegradable and biodegradable PFM at the early stages of maize growth.However,at the late stages,soil temperature,water content,mineral N,NO_(3)^(-)-N,ammonia monooxygenase (AMO) activity,and total phospholipid fatty acids (PLFAs) decreased under biodegradable PFM owing to film fragmentation.White PFM increased soil temperature,water content,and total PLFAs at the early stages of maize growth but decreased soil mineral N and total PLFAs at the late stages,as compared to black PFM.As soil temperature and N availability were the major factors affecting soil microbial community,microbial activity decreased after the fragmentation of biodegradable PFM,owing to the decreased soil temperature,water content,and mineral N.Notably,biodegradable PFM could decrease NO_(3)^(-)-N accumulation in topsoil by decreasing N transformation due to the lower microbial and N-related enzyme (e.g.,AMO) activities,compared with non-biodegradable PFM,which may avoid negative environmental impacts,such as NO_(3)^(-)-N leaching or gas emission after harvest.Maize yield,height,aboveground biomass,and N uptake under biodegradable PFM were similar to those under non-biodegradable PFM during maize growth,implying that biodegradable PFM has no negative impact on crop growth and yield.In general,biodegradable PFM was equivalent to non-biodegradable PFM in terms of maize yield increase and N uptake,but was environmentally friendly.Therefore,biodegradable PFM can be used as an alternative to non-biodegradable PFM in semi-arid areas for sustainable agricultural practices.

Soil mulching can mitigate soil water defi ciency impacts on rainfed maize production in semiarid environments

Temporally irregular rainfall distribution and inefficient rainwater management create severe constraints on crop production in rainfed semiarid areas. Gravel and plastic film mulching are effective methods for improving agricultural productivity and water utilization. However, the effects of these mulching practices on soil water supply and plant water use associated with crop yield are not well understood. A 3-yr study was conducted to analyze the occurrence and distribution of dry spells in a semiarid region of Northwest China and to evaluate the effects of non-mulching （CK）, gravel mulching （GM） and plastic film mulching （FM） on the soil water supply, plant water use and maize （Zea mays L.） grain yield. Rainfall analysis showed that dry spells of ≥5 days occurred frequently in each of 3 yr, accounting for 59.9-69.2% of the maize growing periods. The 〉15-d dry spells during the jointing stage would expose maize plants to particularly severe water stress. Compared with the CK treatment, both the GM and FM treatments markedly increased soil water storage during the early growing season. In general, the total evapotranspiration （ET） was not significantly different among the three treatments, but the mulched treatments significantly increased the ratio of pre- to post-silking ET, which was closely associated with yield improvement. As a result, the grain yield significantly increased by 17.1, 70.3 and 16.7% for the GM treatment and by 28.3, 87.6 and 38.2% for the FM treatment in 2010, 2011 and 2012, respectively, compared with the CK treatment. It＇s concluded that both GM and FM are effective strategies for mitigating the impacts of water deficit and improving maize production in semiarid areas. However. FM is more effective than GM.

Effects of Water-Collecting and -Retaining Techniques on Photosynthetic Rates, Yield, and Water Use Efficiency of Millet Grown in a Semiarid Region

Field experiments were conducted in 2003 and 2004 to study the effects of plastic ridges and furrow film mulching （plastic film on sowing, as well as plastic film on flat soil and hole sowing） and chemicals （a drought resistant agent and a water- retaining agent） on growth, photosynthetic rate, yield, and water use efficiency （WUE） of spring millet （Setaria italica L.）. The experimental results showed that water-collecting and -retaining techniques can effectively increase soil moisture content, the leaf photosynthetic rate and crop growth. Due to increased soil moisture under the plastic-covered ridge and furrow water-collecting in July and August, dry matter and plant height had a increase at the booting stage （late growth advantage）. However, the plastic-covered flat soil and hole sowing reduced soil evaporation during early growth, the increase of dry matter and plant height appeared at the seedling stage （early growth advantage）. Plastic-covered ridge and furrow sowing supplemented with chemical reagents had significant positive effects on water collection and soil moisture retention. Improvement of soil moisture resulted into the increase of the photosynthetic rate, dry matter accumulation yield and WUE. The water-collecting and -retaining techniques can improve WUE and enhance crop yield. Correlation analysis demonstrated that the photosynthetic rate under the water-collecting and -retaining techniques was significantly associated with the soil moisture, but had no significant relationship with leaf chlorophyll content. Plastic- covered ridge and furrow sowing supplemented with chemical reagents increased the yield and WUE by 114% and 8.16 kg ha-1 mm-1, respectively, compared with the control; while without the chemical reagents the yield and WUE were 95% and 7.42 kg ha-1 mm-1 higher, respectively, than those of the control.

Effects of film mulching regime on soil water status and grain yield of rain-fed winter wheat on the Loess Plateau of China

Shortages and fluctuations in precipitation are influential limiting factors for the sustainable cultivation of rain-fed winter wheat on the Loess Plateau of China. Plastic film mulching is one of the most effective water management practices to improve soil moisture, and may be useful in the Loess Plateau for increasing soil water storage. A field experiment was conducted from July 2010 to June 2012 on the Loess Plateau to investigate the effects of mulching time and rates on soil water storage, evapotranspiration （ET）, water use efficiency （WUE）, and grain yield. Six treatments were conducted： （1） early mulching （starting 30 days after harvest） with whole mulching （EW）; （2） early mulching with half mulching （EH）; （3） early mulching with no mulching （EN）; （4） late mulching （starting 60 days after harvest） with whole mulching （LW）; （5） late mulching with half mulching （LH）; and （6） late mulching with no mulching （LN）. EW increased precipitation storage efficiency during the fallow periods of each season by 18.4 and 17.8%, respectively. EW improved soil water storage from 60 days after harvest to the booting stage and also outperformed LN by 13.8 and 20.9% in each growing season. EW also improved spike number per ha by 13.8 and 20.9% and grain yield by 11.7 and 17.4% during both years compared to LN. However, EW decreased WUE compared with LN. The overall results of this study demonstrated that EW could be a productive and efficient practice to improve wheat yield on the Loess Plateau of China.

Effects of mulch and planting methods on Medicago ruthenica seed yield and soil physical-chemical properties

Medicago ruthenica (L.) Trautv., a wild grass species, is commonly grown as a forage crop in arid and semi-arid areas of China. Herein, we explored mulch patterns and planting methods for optimizing M. ruthenica seed production in the loess plateau of the Gansu Province, China from 2017 to 2019. The experiments comprised of six treatments including (1) flat ground without mulch (F0, control);(2) flat ground with a transparent white 0.008 mm thick plastic film mulch (FP);(3) flat ground with 4500 kg/hm2 straw mulch (FS);(4) furrow with 10 cm ridges (R0);(5) furrow with plastic film mulch (RP);and (6) furrow with straw mulch (RS). Results showed that the harvested seed yield of M. ruthenica was the highest under RP treatment, followed by FP and FS treatments. Soil moisture content from mid-May to mid-August in 2017 was the highest under RP and FP treatments, followed by RS and FS treatments. In 2018, soil moisture content was the highest under RS and FS treatments. In 2017 and 2018, soil temperature was the highest under FP and RP treatments, followed by F0 and R0 treatments. Total and available nitrogen, phosphorus, and potassium contents were the highest under RS and FS treatments, followed by RP and FP treatments. Comprehensive analysis result showed that surface mulch improved soil microenvironment and increased seed yield of M. ruthenica. Straw mulch also effectively recycled excess crop straw, thereby encouraging the sustainable development of agriculture in this area. In conclusion, FS treatment was considered the best mode for M. ruthenica seed production in this area.