Today, the time-to-market for plastic products ar e getting shorter, thus the lead-time for making the injection mould is decreasin g. There is potential in timesavings in the mould design stage because the design pro...Today, the time-to-market for plastic products ar e getting shorter, thus the lead-time for making the injection mould is decreasin g. There is potential in timesavings in the mould design stage because the design process that is repeatable for every mould design can be standardized. T he preliminary work of any final plastic injection mould design is to always pro vide an initial design of the mould assembly for product designers (customers) p rior to receiving the final product CAD data. Traditionally and even up till no w, this initial design is always created using 2D CAD packages. The information used for the initial design is based on the technical discussion checklist, in which most mould makers have their own standards. This checklist is also being used as a quotation since the most basic information of the mould in the particu lar project is being recorded in it. The basic information in this checklist in cludes the number of cavities, the type of mould base to be used, the moulding m achine to be used for the moulding, the type of gating system, the type of resin material used and its shrinkage value etc. Information on special requirements such as the number of sliders or lifters to be used is also listed in the check list. At this stage, there is still no information on the cooling and ejection design since they are greatly dependent on the final product CAD data. This res earch focuses on the methodology of providing the initial design in 3D solid bas ed on the technical discussion checklist, which takes the role of the overall st andard template since every sub-design has its own standard template. An examp le of a sub-design that has its own standard template is the cavity layout desi gn. The cavity layout for plastic injection moulds can be designed by controlli ng the geometrical parameters using a standardization template. The standardiza tion template for the cavity layout design consists of configurations for the po ssible layouts. Each configuration of the layout design has its own layout desi gn table of all the geometrical parameters. This standardization template is pr e-defined in the layout design level of the mould assembly design. This ensure s that the required configuration can be loaded into the mould assembly design v ery quickly without having the need to redesign the layout. This makes it usefu l for technical discussions between the product designers and mould designers pr ior to the manufacture of the mould. Changes can be made to the 3D cavity layou t design immediately during the discussions thus the savings in time and avo idance of miscommunications.展开更多
This paper explains the development of a culturally inclusive ubiquitous M-Learning platform(“Mobile Academy”)with an AI-based adaptive user interface.The rationale and need for this research and development are jus...This paper explains the development of a culturally inclusive ubiquitous M-Learning platform(“Mobile Academy”)with an AI-based adaptive user interface.The rationale and need for this research and development are justified by the continuing widespread adoption of the Internet and Internet enabled devices,especially smartphones.The M-learning platform was designed from the onset for the global traveller.The characteristics and limitations of the application are also discussed.The Mobile Academy,proof of concept prototype,was created to facilitate teaching and learning on the move or in environments where the use of a desktop computer is inconvenient or simply impossible.The platform’s primary objective was cross-cultural usability through the use of a combination of AI and plasticity of user interface design techniques.The usability evaluation plan was comprehensive and the results obtained were studied in detail.This also included consideration of the results of the SVM(Support Vector Machine)classifiers’performance and cross-device evaluation.The AI-based adaptive interface prototype has been tested and evaluated to show its merits and capabilities in terms of its usability,inclusivity and effectiveness of the interface.From the results,it was concluded that such a culture independent application was also affordable.展开更多
China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and m...China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin （2015） and Chongqing （2016） China, respectively. A number of crucial research inter- ests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows： i） Plastic deformation mechanism and strengthening strategy, ii） Design and development of new Mg-based materials, iii） Key service properties, and iv） New processing technologies.展开更多
文摘Today, the time-to-market for plastic products ar e getting shorter, thus the lead-time for making the injection mould is decreasin g. There is potential in timesavings in the mould design stage because the design process that is repeatable for every mould design can be standardized. T he preliminary work of any final plastic injection mould design is to always pro vide an initial design of the mould assembly for product designers (customers) p rior to receiving the final product CAD data. Traditionally and even up till no w, this initial design is always created using 2D CAD packages. The information used for the initial design is based on the technical discussion checklist, in which most mould makers have their own standards. This checklist is also being used as a quotation since the most basic information of the mould in the particu lar project is being recorded in it. The basic information in this checklist in cludes the number of cavities, the type of mould base to be used, the moulding m achine to be used for the moulding, the type of gating system, the type of resin material used and its shrinkage value etc. Information on special requirements such as the number of sliders or lifters to be used is also listed in the check list. At this stage, there is still no information on the cooling and ejection design since they are greatly dependent on the final product CAD data. This res earch focuses on the methodology of providing the initial design in 3D solid bas ed on the technical discussion checklist, which takes the role of the overall st andard template since every sub-design has its own standard template. An examp le of a sub-design that has its own standard template is the cavity layout desi gn. The cavity layout for plastic injection moulds can be designed by controlli ng the geometrical parameters using a standardization template. The standardiza tion template for the cavity layout design consists of configurations for the po ssible layouts. Each configuration of the layout design has its own layout desi gn table of all the geometrical parameters. This standardization template is pr e-defined in the layout design level of the mould assembly design. This ensure s that the required configuration can be loaded into the mould assembly design v ery quickly without having the need to redesign the layout. This makes it usefu l for technical discussions between the product designers and mould designers pr ior to the manufacture of the mould. Changes can be made to the 3D cavity layou t design immediately during the discussions thus the savings in time and avo idance of miscommunications.
基金supported by the fund of Xiamen University Malaysia.
文摘This paper explains the development of a culturally inclusive ubiquitous M-Learning platform(“Mobile Academy”)with an AI-based adaptive user interface.The rationale and need for this research and development are justified by the continuing widespread adoption of the Internet and Internet enabled devices,especially smartphones.The M-learning platform was designed from the onset for the global traveller.The characteristics and limitations of the application are also discussed.The Mobile Academy,proof of concept prototype,was created to facilitate teaching and learning on the move or in environments where the use of a desktop computer is inconvenient or simply impossible.The platform’s primary objective was cross-cultural usability through the use of a combination of AI and plasticity of user interface design techniques.The usability evaluation plan was comprehensive and the results obtained were studied in detail.This also included consideration of the results of the SVM(Support Vector Machine)classifiers’performance and cross-device evaluation.The AI-based adaptive interface prototype has been tested and evaluated to show its merits and capabilities in terms of its usability,inclusivity and effectiveness of the interface.From the results,it was concluded that such a culture independent application was also affordable.
基金support from Chinese Committee for Magnesium and its Application
文摘China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin （2015） and Chongqing （2016） China, respectively. A number of crucial research inter- ests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows： i） Plastic deformation mechanism and strengthening strategy, ii） Design and development of new Mg-based materials, iii） Key service properties, and iv） New processing technologies.
