The application of the adaptive growth method is limited because several key techniques during the design process need manual intervention of designers. Key techniques of the method including the ground structure cons...The application of the adaptive growth method is limited because several key techniques during the design process need manual intervention of designers. Key techniques of the method including the ground structure construction and seed selection are studied, so as to make it possible to improve the effectiveness and applicability of the adaptive growth method in stiffener layout design optimization of plates and shells. Three schemes of ground structures, which are comprised by different shell elements and beam elements, are proposed. It is found that the main stiffener layouts resulted from different ground structures are almost the same, but the ground structure comprised by 8-nodes shell elements and both 3-nodes and 2-nodes beam elements can result in clearest stiffener layout, and has good adaptability and low computational cost. An automatic seed selection approach is proposed, which is based on such selection rules that the seeds should be positioned on where the structural strain energy is great for the minimum compliance problem, and satisfy the dispersancy requirement. The adaptive growth method with the suggested key techniques is integrated into an ANSYS-based program, which provides a design tool for the stiffener layout design optimization of plates and shells. Typical design examples, including plate and shell structures to achieve minimum compliance and maximum bulking stability are illustrated. In addition, as a practical mechanical structural design example, the stiffener layout of an inlet structure for a large-scale electrostatic precipitator is also demonstrated. The design results show that the adaptive growth method integrated with the suggested key techniques can effectively and flexibly deal with stiffener layout design problem for plates and shells with complex geometrical shape and loading conditions to achieve various design objectives, thus it provides a new solution method for engineering structural topology design optimization.展开更多
Straight-and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry.Theoretically,the curved-bar refining plate has a relatively uniform bar interaction...Straight-and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry.Theoretically,the curved-bar refining plate has a relatively uniform bar interaction angle,which indicates uniform refining effects.The bar angle of the curved bar was proposed and two typical curved-bar plates,the three-stage radial curved-bar plate and isometric curved-bar plate,were designed in this paper.The arc equations of the curved-bar center line and curved-bar edges were established and finally,the specific edge load(SEL)of the curved-bar plate was derived.The determination of bar parameters was discussed,which provides a theoretical basis for the design of curved-bar plates.展开更多
Bipolar plates perform as current conductors between cells, provide conduits for reactant gases, facilitate water and thermal management through the cells, and constitute the backbone of a fuel cell stack. Currently, ...Bipolar plates perform as current conductors between cells, provide conduits for reactant gases, facilitate water and thermal management through the cells, and constitute the backbone of a fuel cell stack. Currently, commercial bipolar plates are made of graphite composite because of its relatively low interfacial contact resistance (ICR) and high corrosion resistance. However, graphite composite’s manufacturability, permeability, and durability of shock and vibration are unfavorable in comparison to metals. Therefore, metals have been considered as a replacement material for graphite composite bipolar plates. The main objective of this study is to evaluate the effect of terminal connection design and bipolar plate material on PEM fuel cell overall performance. The study has indicated that single cell performance can be improved by combining terminals into metallic bipolar plates. This terminal design reduces the internal cell resistance and eliminates the need for additional terminal plates. The improved single cell performance by 18% and the increased savings in hydrogen consumption by 15% at the current density of 0.30 A/cm2 was attributed to the robust metal to metal contact between the terminal and the metallic bipolar plates. However, connecting metal terminal directly into graphite bipolar plates did not exhibit similar improvement in the performance of graphite fuel cells because of their brittleness that could have caused damage in the plates and poor contacts.展开更多
以某型柴油机的油底壳作为研究对象,对其声振特性进行识别与分析,确定设计穿孔板隔声罩的共振频带范围。使用粒子群算法针对共振频率进行穿孔板参数的优化设计,再通过阻抗管试验确定小孔分布对吸声性能的影响,并对穿孔板隔声罩进行多目...以某型柴油机的油底壳作为研究对象,对其声振特性进行识别与分析,确定设计穿孔板隔声罩的共振频带范围。使用粒子群算法针对共振频率进行穿孔板参数的优化设计,再通过阻抗管试验确定小孔分布对吸声性能的影响,并对穿孔板隔声罩进行多目标形貌优化设计以避开共振及激励频率。目标柴油机上加装优化的油底壳穿孔板隔声罩后,整机总声压级降低0.5 d B,降噪效果较好。展开更多
基金supported by National Natural Science Foundation of China(Grants No.50875174,51175347)Innovation Program of Shanghai Municipal Education Commission(Grant No.13ZZ114)Capacity Building Project of Local University of Shanghai Municipal Science and Technology Commission(Grant No.13160502500)
文摘The application of the adaptive growth method is limited because several key techniques during the design process need manual intervention of designers. Key techniques of the method including the ground structure construction and seed selection are studied, so as to make it possible to improve the effectiveness and applicability of the adaptive growth method in stiffener layout design optimization of plates and shells. Three schemes of ground structures, which are comprised by different shell elements and beam elements, are proposed. It is found that the main stiffener layouts resulted from different ground structures are almost the same, but the ground structure comprised by 8-nodes shell elements and both 3-nodes and 2-nodes beam elements can result in clearest stiffener layout, and has good adaptability and low computational cost. An automatic seed selection approach is proposed, which is based on such selection rules that the seeds should be positioned on where the structural strain energy is great for the minimum compliance problem, and satisfy the dispersancy requirement. The adaptive growth method with the suggested key techniques is integrated into an ANSYS-based program, which provides a design tool for the stiffener layout design optimization of plates and shells. Typical design examples, including plate and shell structures to achieve minimum compliance and maximum bulking stability are illustrated. In addition, as a practical mechanical structural design example, the stiffener layout of an inlet structure for a large-scale electrostatic precipitator is also demonstrated. The design results show that the adaptive growth method integrated with the suggested key techniques can effectively and flexibly deal with stiffener layout design problem for plates and shells with complex geometrical shape and loading conditions to achieve various design objectives, thus it provides a new solution method for engineering structural topology design optimization.
基金funding by the National Natural Science Foundation (Grant No. 50745048)
文摘Straight-and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry.Theoretically,the curved-bar refining plate has a relatively uniform bar interaction angle,which indicates uniform refining effects.The bar angle of the curved bar was proposed and two typical curved-bar plates,the three-stage radial curved-bar plate and isometric curved-bar plate,were designed in this paper.The arc equations of the curved-bar center line and curved-bar edges were established and finally,the specific edge load(SEL)of the curved-bar plate was derived.The determination of bar parameters was discussed,which provides a theoretical basis for the design of curved-bar plates.
文摘Bipolar plates perform as current conductors between cells, provide conduits for reactant gases, facilitate water and thermal management through the cells, and constitute the backbone of a fuel cell stack. Currently, commercial bipolar plates are made of graphite composite because of its relatively low interfacial contact resistance (ICR) and high corrosion resistance. However, graphite composite’s manufacturability, permeability, and durability of shock and vibration are unfavorable in comparison to metals. Therefore, metals have been considered as a replacement material for graphite composite bipolar plates. The main objective of this study is to evaluate the effect of terminal connection design and bipolar plate material on PEM fuel cell overall performance. The study has indicated that single cell performance can be improved by combining terminals into metallic bipolar plates. This terminal design reduces the internal cell resistance and eliminates the need for additional terminal plates. The improved single cell performance by 18% and the increased savings in hydrogen consumption by 15% at the current density of 0.30 A/cm2 was attributed to the robust metal to metal contact between the terminal and the metallic bipolar plates. However, connecting metal terminal directly into graphite bipolar plates did not exhibit similar improvement in the performance of graphite fuel cells because of their brittleness that could have caused damage in the plates and poor contacts.
文摘以某型柴油机的油底壳作为研究对象,对其声振特性进行识别与分析,确定设计穿孔板隔声罩的共振频带范围。使用粒子群算法针对共振频率进行穿孔板参数的优化设计,再通过阻抗管试验确定小孔分布对吸声性能的影响,并对穿孔板隔声罩进行多目标形貌优化设计以避开共振及激励频率。目标柴油机上加装优化的油底壳穿孔板隔声罩后,整机总声压级降低0.5 d B,降噪效果较好。
