A novel triple periodic minimal surface-like plate lattice and its data-driven optimization method for superior mechanical properties

Lattice structures can be designed to achieve unique mechanical properties and have attracted increasing attention for applications in high-end industrial equipment,along with the advances in additive manufacturing(AM)technologies.In this work,a novel design of plate lattice structures described by a parametric model is proposed to enrich the design space of plate lattice structures with high connectivity suitable for AM processes.The parametric model takes the basic unit of the triple periodic minimal surface(TPMS)lattice as a skeleton and adopts a set of generation parameters to determine the plate lattice structure with different topologies,which takes the advantages of both plate lattices for superior specific mechanical properties and TPMS lattices for high connectivity,and therefore is referred to as a TPMS-like plate lattice(TLPL).Furthermore,a data-driven shape optimization method is proposed to optimize the TLPL structure for maximum mechanical properties with or without the isotropic constraints.In this method,the genetic algorithm for the optimization is utilized for global search capability,and an artificial neural network(ANN)model for individual fitness estimation is integrated for high efficiency.A set of optimized TLPLs at different relative densities are experimentally validated by the selective laser melting(SLM)fabricated samples.It is confirmed that the optimized TLPLs could achieve elastic isotropy and have superior stiffness over other isotropic lattice structures.

Love wave propagation in one-dimensional piezoelectric quasicrystal multilayered nanoplates with surface effects

The exact solutions for the propagation of Love waves in one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)nanoplates with surface effects are derived.An electro-elastic model is developed to investigate the anti-plane strain problem of Love wave propagation.By introducing three shape functions,the wave equations and electric balance equations are decoupled into three uncorrelated problems.Satisfying the boundary conditions of the top surface on the covering layer,the interlayer interface,and the matrix,a dispersive equation with the influence of multi-physical field coupling is provided.A surface PQC model is developed to investigate the surface effects on the propagation behaviors of Love waves in quasicrystal(QC)multilayered structures with nanoscale thicknesses.A novel dispersion relation for the PQC structure is derived in an explicit closed form according to the non-classical mechanical and electric boundary conditions.Numerical examples are given to reveal the effects of the boundary conditions,stacking sequence,characteristic scale,and phason fluctuation characteristics on the dispersion curves of Love waves propagating in PQC nanoplates with surface effects.

Morphodynamic signatures derived from daily surface elevation dynamics can explain the morphodynamic development of tidal flats

Understanding the sensitivity of tidal flats to environmental changes is challenging.Currently,most studies rely on process-based models to systematically explain the morphodynamic evolution of tidal flats.In this study,we proposed an alternative empirical approach to explore tidal flat dynamics using statistical indices based on long-term time series of daily surface elevation development.Surface elevation dynamic(SED)indices focus on the magnitude and period of surface elevation changes,while morphodynamic signature(MDS)indices relate sediment dynamics to environmental drivers.The statistical analyses were applied to an intervention site in the Netherlands to determine the effect of recently constructed groynes on the tidal flat.Using these analyses,we were able to(1)detect a reduction in the daily SED and(2)determine that the changes in the daily SED were predominantly caused by the reduction in wave impact between the groynes rather than the reduction in tidal currents.Overall,the presented results showed that the combination of novel statistical indices provides new insights into the trajectories of tidal flats,ecosystem functioning,and sensitivity to physical drivers(wind and tides).Finally,we suggested how the SED and MDS indices may help to explore the future trajectories and climate resilience of intertidal habitats.

Development of New Green Feed for Large Water Surface Ecological Fishery

In view of the fact that cages and bait are not allowed in large water surface aquiculture,1-2 kinds of new green feeds"plankton+microecologics"were developed to solve the problems of yield reduction,slow growth and difficulty in fishing of aquatic organisms caused by extensive mode.The new green feed is ecological,environmentally friendly and residue-free,which not only supplements nutrition but also meets the requirements of environmental protection.

Research on development of surface-roughness variation and control technology of the automotive plates and rolls

Surface roughness considerably influences the stamping and coating performance of the automotive plates;however,the surface roughness of the automotive plates is transferred from the roll during the rolling process.Therefore,the variation and control technology regarding the roughness of the automotive plates and rolls has drawn increasing attention from researchers in China and around the globe.In this study,the research methods,analytical techniques,prediction models,transfer rules,and control technologies regarding the surface roughness of the automotive plates and rolls were reviewed.Among these,an online measurement system for automotive-plate and roll surface roughness has been applied to the production lines of Germany,China,Belgium,Holland,Austria,and other countries and has achieved remarkable results.Online measurement and timely feedback regarding the automotive-plate and roll surface roughness are needed to ensure favorable conditions for the establishment of automotive-plate roughness-control measurement.

Surface quality, microstructure and mechanical properties of Cu-Sn alloy plate prepared by two-phase zone continuous casting

Cu-4.7%Sn （mass fraction） alloy plate was prepared by the self-developed two-phase zone continuous casting （TZCC） process. The relationship between process parameters of TZCC and surface quality of the alloy plate was investigated. The microstructure and mechanical properties of the TZCC alloy plate were analyzed. The results show that Cu-4.7%Sn alloy plate with smooth surface can be obtained by means of reasonable matching the entrance temperature of two-phase zone mold and the continuous casting speed. The microstructure of the TZCC alloy is composed of grains-covered grains, small grains with self-closed grain boundaries, columnar grains and equiaxed grains. Compared with cold mold continuous casting Cu-4.7%Sn alloy plate, the room temperature tensile strength and ductility of the TZCC alloy plate are greatly improved.

Preparation and surface modification of PVDF-carbon felt composite bipolar plates for vanadium flow battery

The performance of vanadium flow batteries （VFBs） is closely related to the materials used in the bipo- lar plates. Carbon-based composite bipolar plates are particularly suitable for VFB applications. However. most original preparation methods cannot simultaneously achieve good electrical conductivity and me- chanical performance. In this paper, we propose a novel approach to fabricating bipolar plates with car- bon plastic materials, including four steps, namely coating a poly （vinylidene fluoride） （PVDF） solution onto carbon felt, solvent evaporation, hot-pressing, and surface modification. The resulting bipolar plates showed high conductivity, good mechanical strength, and corrosion resistance. Surface modification by coating with carbon nanotubes （CNTs） removed the PVDF-rich layer from the surface of the carbon fibers. The high surface area of the CNT withdrew PVDF resin from the carbon fiber surface, and promoted the formation of a conductive network. The flexibility and battery charge-discharge cycle measurements showed that the composite bipolar plates can meet requirements for VFB applications.

On the Interaction of Surface Waves with An Elastic Plate of Finite Length in Head Seas

An eigen-function expansion method based on a new orthogonal inner product is proposed by Sahoo et al. (2000) for the study of the hydroelastic response of mat-type VLFS in head seas. However, their main emphasis is on the effect of edge conditions and they assume that the plate is of a semi-infinite length. In reality, the plate is of finite length. For consideration of the finite length effect, the reflection and transmission from the other end must be considered. The effect of this reflection and transmission on the hydroelastic response of VLFS is of interest for practical application. Furthermore, the physical meaning of the new inner product was not given in their paper. In this paper, it is shown that the new inner product can he derived from the governing equation and the bottom boundary conditions. Then the same eigen-function expansion method is adopted for the study of the hydroelastic response of an elastic plate of finite length in surface waves. Detailed comparisons are made between the present finite length model and the semi-infinite model and between the present model predictions and the experimental results. It is found that that the finite length effect is significant and the accuracy of present model is higher than the semi-infinite model. Furthermore, a new phenomenon, which is not mentioned in Sahoo et al. (2000), is found. Taht is, for larger L/h ratios, the reflection and transmission coefficients will oscillate with the non-dimensional parameter k(0) h. Further study is needed for full understanding of this phenomenon.

Effects of Crop Growth and Development on Land Surface Fluxes

In this study, the Crop Estimation through Resource and Environment Synthesis model （CERES3.0） was coupled into the Biosphere-Atmosphere Transfer Scheme （BATS）, which is called BATS CERES, to represent interactions between the land surface and crop growth processes. The effects of crop growth and development on land surface processes were then studied based on numerical simulations using the land surface models. Six sensitivity experiments by BATS show that the land surface fluxes underwent substantial changes when the leaf area index was changed from 0 to 6 m2 m-2. Numerical experiments for Yucheng and Taoyuan stations reveal that the coupled model could capture not only the responses of crop growth and development to environmental conditions, but also the feedbacks to land surface processes. For quantitative evaluation of the effects of crop growth and development on surface fluxes in China, two numerical experiments were conducted over continental China： one by BATS CERES and one by the original BATS. Comparison of the two runs shows decreases of leaf area index and fractional vegetation cover when incorporating dynamic crops in land surface simulation, which lead to less canopy interception, vegetation transpiration, total evapotranspiration, top soil moisture, and more soil evaporation, surface runoff, and root zone soil moisture. These changes are accompanied by decreasing latent heat flux and increasing sensible heat flux in the cropland region. In addition, the comparison between the simulations and observations proved that incorporating the crop growth and development process into the land surface model could reduce the systematic biases of the simulated leaf area index and top soil moisture, hence improve the simulation of land surface fluxes.

Partial Surface Damper to Suppress Vibration for Thin Walled Plate Milling

The material removal rate and required work- piece surface quality of thin-walled structure milling are greatly limited due to its severe vibration, which is directly associated with the dynamic characteristics of the system. Therefore, the suppression of vibration is an unavoidable problem during milling. A novel partial surface damping method is proposed to modify the mode of the thin walled cantilever plate and to suppress vibration during milling. Based on classical plate theory, the design criterion is analyzed and configuration of the partial surface damper is introduced, in which viscoelastic plate and constraining plate are attached to the surface of the plate to increase the system＇s natural frequency and loss factor. In order to obtain the energy expression of the cutting system, the Ritz method is used to describe the unknown displacements. Then, with Lagrange＇s equation, the natural frequency and loss factor are calculated. In addition, the plate is divided into a finite number of square elements, and the regulation of treated position is studied based on theoretic and experimental analysis. The milling tests are conducted to verify its damping performance and the experimentalresults show that with treatment of partial surface damper, the deformation of the hare plate is reduced from 0.27 mm to 0.1 mm, while the vibration amplitude of the bare plate is reduced from 0.08 mm to 0.01 mm. The proposed research provides the instruction to design partial surface damper.

Recent Progress in Surface Integrity Research and Development

1.Introduction Surface integrity has great significance for the quality and performance of machined components,and has therefore been increasingly recognized by industry.In particular,within certain industries that require high reliability,such as the aerospace industry,surface integrity is one of the most relevant indexes used to evaluate the quality of machined parts.Thus,obtaining updated knowledge on surface integrity is of great interest to both the academic community and industry[1].

Immersing Treatment of Steel Plate Surface in Steel-Aluminum Solid to Liquid Bonding

The interfacial status of the steel-aluminum solid to liquid bonding plates (their steel plate surfaces were or were not immersed in flux aqueous solution) were measured by using SEM (Scanning Electron Microscope) and X-ray diffraction . The results showed that the layer of flux (the minimum thickness was 15 μm on the steel plate surface) could protect the steel plate surface from oxidizing effectively at high temperature in solid to liquid bonding. The melt temperatUre of the flux should be lower than 580 ℃ so that it could be melted and removed completely. No. 1 flux (patent product made by the author) made up of halogeindes could also force liquid aluminum to infiltrate into steel plate surface and thus the interfacial shear strength of the bonding plate was rather large.

Ship hull plate processing surface fairing with constraints based on B-spline

The problem of ship hull plate processing surface fairing with constraints based on B-spline is solved in this paper. The algorithm for B-spline curve fairing with constraints is one of the most common methods in plane curve fairing. The algorithm can be applied to global and local curve fairing. It can constrain the perturbation range of the control points and the shape variation of the curve, and get a better fairing result in plane curves. In this paper, a new fairing algorithm with constraints for curves and surfaces in space is presented. Then this method is applied to the experiments of ship hull plate processing surface. Finally numerical results are obtained to show the efficiency of this method.

Electrochemical behavior of Cu-Zn-Al shape memory alloy after surface modification by electroless plated Ni-P

The electrochemical behavior of Cu-Zn-Al shape memory alloy (SMA) with andwithout electroless plated Ni-P was investigated by electrochemical methods, in artificial Tyrode'ssolution. The results showed that Cu-Zn-Al SMA engendered dezincification corrosion in Tyrode'ssolution. The anodic active current densities as well as electrochemical dissolution sensitivity ofthe electroless plated Ni-P Cu-Zn-Al SMA increased with NaCl concentration rising, pH of solutiondecreasing and environmental temperature uprising. X-ray diffraction analysis indicated that aftersurface modification by electroless plated Ni-P, an amorphous plated film formed on the surface ofCu-Zn-Al SMA. This film can effectively isolate matrix metal from corrosion media and significantlyimprove the electrochemical property of Cu-Zn-Al SMA in artificial Tyrode's solution.

Control Mechanism of Surface Subsidence and Overburden Movement in Backfilling Mining based on Laminated Plate Theory

The backfilling mining technology is a type of high-efficiency coal mining technology that is used to address the environmental issues caused by the caving mining technology.In this paper,the mechanical model of symmetrical laminated plate representing the overburden movement caused by the backfilling mining technology is established,and the governing differential equation of the motion of the overburden is derived.The boundary conditions of the mechanical model are put forward,and the analytical solution of the overburden movement and surface subsidence is obtained.The numerical model of the overburden movement and surface subsidence,under mining with backfilling,is established by means of the FLAC3D numerical software,which aims to systematically study the influence of backfilling compactness,mining thickness,and mining depth on the overburden movement and surface subsidence in backfilling mining.When the compactnessηis less than 70%,the overburden movement and surface subsidence is greater,while whenηis greater than 70%,the overburden movement and surface subsidence is reduced significantly.On this basis,the control mechanism of surface subsidence and overburden movement in backfilling mining is obtained.The suitable backfilling compactness is the key to controlling surface subsidence and overburden movement in backfilling mining.

Effect of Mechanical Surface Treatment on the Bonding Mechanism and Properties of Cold‑Rolled Cu/Al Clad Plate

In the case of valuable cold-rolled Cu/Al clad plates,billet surface treatment before rolling is a significant process that can affect the bonding efficiency and quality.While the current studies primarily focus on the influence of rolling parameters,insufficient attention has been paid to surface treatment.In this study,the effects of mechanical surface treatment on the bonding mechanism and bonding properties of cold-rolled Cu/Al clad plates were investigated.The results showed that different mechanical surface treatments have significant effects on the surface morphology,roughness,and residual stress.In addition,the effect of surface mechanical treatment on bonding quality was also observed to be critical.When the grinding direction was consistent with the rolling direction(RD),the bonding quality of the Cu/Al clad plates was significantly improved.After surface treatment along the RD for 20 s,the Cu/Al clad plates showed the highest shear strength(78 MPa),approximately four times as high as that of the unpolished samples.Simultaneously,the peel strength of this process was also significantly higher than that achieved via the other processes.Finally,on the basis of the surface morphology,roughness,and residual stress,the effect of surface treatment on the bonding mechanism and bonding properties of Cu/Al clad plates was analyzed.This study proposes a deeper understanding of the bonding behavior and bonding mechanism for cold rolled clad plates processed via mechanical surface treatment.

DIAGONAL POINT BY POINT SURFACE DEVELOPMENT METHOD BASED ON NURBS SURFACE FOR BLANK SHAPE ESTIMATION OFCOVER PANEL

According to the characteristics of a complex cover panel, its geometry shape is described by the NURBS surface with great description capability. With the reference to the surface classification determined by Gauss curvature, the proportion of the mid-surface area between before and after being developed is derived from the displacement variation of the mid-surface in the normal vector direction of the sheet metal during the sheet metal forming process. Hereby, based on the curve development theory in differential geometry, a novel diagonal point by point surface development method is put forward to estimate a complex cover panel＇s blank contour efficiently. By comparing the sample＇s development result of diagonal point by point surface development method with that of available one-step method, the validity of the proposed surface development method is verified.

Scattering of Surface Water Waves Involving Semi-infinite Floating Elastic Plates on Water of Finite Depth

Two problems of scattering of surface water waves involving a semi-infinite elastic plate and a pair of semi-infinite elastic plates,separated by a gap of finite width,floating horizontally on water of finite depth,are investigated in the present work for a two-dimensional time-harmonic case.Within the frame of linear water wave theory,the solutions of the two boundary value problems under consideration have been represented in the forms of eigenfunction expansions.Approximate values of the reflection and transmission coefficients are obtained by solving an over-determined system of linear algebraic equations in each problem.In both the problems,the method of least squares as well as the singular value decomposition have been employed and tables of numerical values of the reflection and transmission coefficients are presented for specific choices of the parameters for modelling the elastic plates.Our main aim is to check the energy balance relation in each problem which plays a very important role in the present approach of solutions of mixed boundary value problems involving Laplace equations.The main advantage of the present approach of solutions is that the results for the values of reflection and transmission coefficients obtained by using both the methods are found to satisfy the energy-balance relations associated with the respective scattering problems under consideration.The absolute values of the reflection and transmission coefficients are presented graphically against different values of the wave numbers.

Effects of the microstructure of twin roll cast and hot rolled plates on the surface quality of presensitized plates

The effect of the microstructure of plates fabricated both in the traditional process, involving casting, hot rolling and cold rolling （HR）, and in the novel twin roll casting ＋ cold rolling （TRC） process on the surface quality of presensitized （PS） plates was analyzed by optical microscopy （OM）, scanning electron microscopy （SEM）, and energy-dispersive X-ray spectroscopy （EDXS）. The formation of pores on the surface of the electrolyzed HR plate could be attributed to the presence of approximately 1-μm-sized large Al-Fe precipitates in the HR plate compared to the smaller precipitates in the TRC plate. Moreover, residual graphite lubricants used during the TRC process were entrapped on the surface of the TRC plate during the subsequent rolling process. The entrapped pollutants tended to further deteriorate the formation of pores on the surface of the TRC plate, and no residual carbon was detected on the surface of the HR plate. Furthermore, the surface quality of the TRC plate can be improved by surface cleaning before the cold rolling process, which could dramatically lower the residual graphite on the surface.

Effect of Reelin signaling on pre-plate splitting during cerebral cortex development

The development of the 6-layered cerebral neocortex is one of the most important events during nervous system development, and disturbances could result in various malformations, causing clinically intractable diseases, such as epilepsy and cerebral palsy. Pre-plate splitting is the first developmental step of the cortical plate formation. Without correct pre-plate splitting, normal cerebral cortex structures are disturbed. The Reelin-Dabl molecular pathway plays a critical role during cerebral cortex development, and deficiencies in this pathway result in failed pre-plate splitting and an inverted cortical plate. This paper summarizes findings involving Reelin and pre-plate splitting and further explores the precise role of Reelin during pre-plate splitting.