Employing Simulated Annealing Algorithm (SAA) and many measured data, acalculation model of work roll wear was built in the 2 800 mm 4-high mill of Wuhan Iron and Steel(Group) Co. (WISCO). The model was a semi-theory ...Employing Simulated Annealing Algorithm (SAA) and many measured data, acalculation model of work roll wear was built in the 2 800 mm 4-high mill of Wuhan Iron and Steel(Group) Co. (WISCO). The model was a semi-theory practical formula. Its pattern and magnitude werestill hardly defined with classical optimization methods. But the problem could be resolved by SAA.It was pretty high precision to predict the values for the wear profiles of work roll in a rollingunit. After one-year application, the results show that the model is feasible in engineering, and itcan be applied to predict the wear profiles of work roll in other mills.展开更多
In this article, researches on improvement of 1RX regenerator used in cleaning processes of cotton ginning enterprises were carried out. The effect of changing the parameters of the new working body—rubber-plate drum...In this article, researches on improvement of 1RX regenerator used in cleaning processes of cotton ginning enterprises were carried out. The effect of changing the parameters of the new working body—rubber-plate drum and machine inlet on the efficiency of cotton separation was studied in the research, and the maximum level of efficiency of separation was determined. In this paper work, the main factors affecting the efficient operation of the regenerator were identified, their value limits were determined, and research was conducted using the mathematical planning method. As a result, effective operation of the improved 1RX cotton regenerator was observed at the value of the given factors, that is, the separation efficiency was 99.5%, the cleaning efficiency was higher than 88.7%, and the amount of seed cotton in the waste was reduced lower than 2.5%.展开更多
基金[This work was financially supported by the National Natural Science Foundation of China (No.59835170).]
文摘Employing Simulated Annealing Algorithm (SAA) and many measured data, acalculation model of work roll wear was built in the 2 800 mm 4-high mill of Wuhan Iron and Steel(Group) Co. (WISCO). The model was a semi-theory practical formula. Its pattern and magnitude werestill hardly defined with classical optimization methods. But the problem could be resolved by SAA.It was pretty high precision to predict the values for the wear profiles of work roll in a rollingunit. After one-year application, the results show that the model is feasible in engineering, and itcan be applied to predict the wear profiles of work roll in other mills.
文摘In this article, researches on improvement of 1RX regenerator used in cleaning processes of cotton ginning enterprises were carried out. The effect of changing the parameters of the new working body—rubber-plate drum and machine inlet on the efficiency of cotton separation was studied in the research, and the maximum level of efficiency of separation was determined. In this paper work, the main factors affecting the efficient operation of the regenerator were identified, their value limits were determined, and research was conducted using the mathematical planning method. As a result, effective operation of the improved 1RX cotton regenerator was observed at the value of the given factors, that is, the separation efficiency was 99.5%, the cleaning efficiency was higher than 88.7%, and the amount of seed cotton in the waste was reduced lower than 2.5%.
