As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybr...As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybrid electric vehicles (HEVs) have been introduced to mitigate problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% of the desired SOC regardless of starting SOC.展开更多
This paper is investigating the use of composite armour reinforced by nanomaterials, for the protection of light armoured(LAV) and medium armoured military vehicles(MAV), and the interaction between the composite mate...This paper is investigating the use of composite armour reinforced by nanomaterials, for the protection of light armoured(LAV) and medium armoured military vehicles(MAV), and the interaction between the composite materials and high-performance ballistic projectiles. Four armour materials, consisted of front hybrid fibre reinforced polymer cover layer, ceramic strike-face, fibre reinforced polymer intermediate layer and the metal matrix composite reinforced backplate, were manufactured and assembled by adhesive technology. The proposed laminated protection system is suitable for armoured ground vehicles;however, it could be used as armour on ground, air and naval platforms. The design of the protection system, including material selection and thickness, was elaborated depending on the performance requirements of Level 4 + STANAG 4569 military standard(projectile 14.5 mm × 114 mm API B32) and especially on a design philosophy which is analysed with the specifications. The backplate of this new composite is a hybrid material of Metal Matrix Composite(MMC) reinforced with carbon nanotubes(CNTs), manufactured with the use of powder metallurgy technique. The composite backplate material was morphologically, mechanically and chemically analysed. Results show that all plates are presenting high mechanical properties and ballistic characteristics, compared to commonly used armour plates. Real military ballistic tests according to AEP-STANAG 4569 were carried out for the total composite armour systems. After the ballistic tests, AA2024-CNT3 showed the best protection results, compared with the other plates(AA2024-CNT1 and AA2024-CNT2), with the projectile being unable to fully penetrate the composite plate.展开更多
This paper develops a parallel hybrid electric vehicle(PHEV)propor-tional integral controller with driving cycle.To improve fuel efficiency and reduce hazardous emissions in hybrid electric vehicles(HEVs)combine an ele...This paper develops a parallel hybrid electric vehicle(PHEV)propor-tional integral controller with driving cycle.To improve fuel efficiency and reduce hazardous emissions in hybrid electric vehicles(HEVs)combine an electric motor(EM),a battery and an internal combustion engine(ICE).The electric motor assists the engine when accelerating,driving longer highways or climbing hills.This enables the use of a smaller,more efficient engine.It also makes use of the concept of regenerative braking to maximize energy efficiency.In a Hybrid Electric Vehicle(HEV),energy dissipated while braking is utilized to charge the battery.The proportional integral controller was used in this paper to analyze engine,motor performance and the New European Driving Cycle(NEDC)was used in the vehicle driving test using Matlab/Simulink.The proportional integral controllers were designed to track the desired vehicle speed and manage the vehi-cle’s energyflow.The Sea Lion Optimization(SLnO)methods were created to reduce fuel consumption in a parallel hybrid electric vehicle and the results were obtained for the New European Driving Cycle.展开更多
Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the mai...Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the main factors which affect HEV's fuel consumption, emission and performance. Therefore, optimal management of the energy components is a key element for the success of a HEV. An optimal energy management system is developed for HEV based on genetic algorithm. Then, different powertrain system component combinations effects are investigated in various driving cycles. HEV simulation results are compared for default rule-based, fuzzy and GA-fuzzy controllers by using ADVISOR. The results indicate the effectiveness of proposed optimal controller over real world driving cycles. Also, an optimal powertrain configuration to improve fuel consumption and emission efficiency is proposed for each driving condition. Finally, the effects of batteries in initial state of charge and hybridization factor are investigated on HEV performance to evaluate fuel consumption and emissions. Fuel consumption average reduction of about 14% is obtained for optimal configuration data in contrast to default configuration. Also results indicate that proposed controller has reduced emission of about 10% in various traffic conditions.展开更多
The paper proposes an adoption of slope,elevation,speed and route distance preview to achieve optimal energymanagement of plug-in hybrid electric vehicles(PHEVs).Theapproach is to identify route features from historic...The paper proposes an adoption of slope,elevation,speed and route distance preview to achieve optimal energymanagement of plug-in hybrid electric vehicles(PHEVs).Theapproach is to identify route features from historical and real-time traffic data,in which information fusion model and trafficprediction model are used to improve the information accuracy.Then,dynamic programming combined with equivalent con-sumption minimization strategy is used to compute an optimalsolution for real-time energy management.The solution is thereference for PHEV energy management control along the route.To improve the system's ability of handling changing situation,the study further explores predictive control model in the real-time control of the energy.A simulation is performed to modelPHEV under above energy control strategy with route preview.The results show that the average fuel consumption of PHEValong the previewed route with model predictive control(MPC)strategy can be reduced compared with optimal strategy andbase control strategy.展开更多
In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is d...In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is divided into power mode and economy mode. Energy management strategy designing methods of power mode and economy mode are proposed. Maximum velocity, acceleration performance and fuel consumption are simulated during the CS period in the AVL CRUISE simulation environment. The simulation results indicate that the maximum velocity and acceleration time of the power mode are better than those in the economy mode. Fuel consumption of the economy mode is better than that in the power mode. Fuel consumption of PHEV during the CS period is further improved by using the methods proposed in this paper, and this is meaningful for research and development of PHEV.展开更多
In order to achieve the improvement of the driving comfort and energy efficiency,an new e-CVT flexible full hybrid electric system(E2FHS) is proposed,which uses an integrated main drive motor and generator to take the...In order to achieve the improvement of the driving comfort and energy efficiency,an new e-CVT flexible full hybrid electric system(E2FHS) is proposed,which uses an integrated main drive motor and generator to take the place of the original automatic or manual transmission to realize the functions of continuously variable transmission(e-CVT).The design and prototype realization of the E2FHS system for a plug-in hybrid vehicle(PHEV) is performed.In order to analyze and optimize the parameters and the power flux between different parts of the E2FHS,simulation software is developed.Especially,in order to optimize the performance of the energy economy improvement of the E2FHS,the effect of the different energy management controllers is investigated,and an adaptive online-optimal energy management controller for the E2FHS is built and validated by the prototype PHEV.展开更多
In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, ba...In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, based on simulations with three different driving cycles. The investigated hybrid energy storage topologies are an energy optimized lithium-ion battery (HE) in combination with an Electrical Double-Layer Capacitor (EDLC) system, in combination with a power optimized lithium-ion battery (HP) system or in combination with a Lithium-ion Capacitor (LiCap) system, that act as a Peak Power System. From the simulation results it was observed that hybridization of the HE lithium-ion based energy storage system resulted from the three topologies in an increased overall energy efficiency of the RESS, in an extended all electric range of the PHEV and in a reduced average current through the HE battery. The lowest consumption during the three driving cycles was obtained for the HE-LiCap topology, where fuel savings of respectively 6.0%, 10.3% and 6.8% compared with the battery stand-alone system were achieved. The largest extension of the range was achieved for the HE-HP configuration (17% based on FTP-75 driving cycle). HP batteries however have a large internal resistance in comparison to EDLC and LiCap systems, which resulted in a reduced overall energy efficiency of the hybrid RESS. Additionally, it was observed that the HP and LiCap systems both offer significant benefits for the integration of a peak power system in the drivetrain of a Plug-in Hybrid Electric Vehicle due to their low volume and weight in comparison to that of the EDLC system.展开更多
Improvements in hybrid electric vehicle (HEV) fuel economy and emissions heavily depend on an efficient energy management strategy (EMS).However,the uncertainty of future driving conditions generally cannot be easily ...Improvements in hybrid electric vehicle (HEV) fuel economy and emissions heavily depend on an efficient energy management strategy (EMS).However,the uncertainty of future driving conditions generally cannot be easily tackled in EMS design.Most existing EMSs act upon fixed parameters and cannot adapt to varying driving conditions.Therefore,they usually fail to fully explore the potential of these advanced vehicles.In this paper,a novel EMS design procedure based on neural dynamic programming (NDP) is proposed.The NDP is a generic online learning algorithm,which combines stochastic dynamic programming (SDP) and the temporal difference (TD) method.Instead of computing the utility function and optimal control actions through Bellman equations,the NDP algorithm uses two neural networks to approximate them.The weights of these neural networks are updated online by the TD method.It avoids the high computational cost that SDP suffers from and is suitable for real-time implementation.The main advantages of NDP EMS is that it does not rely on prior information related to future driving conditions,and can self-tune with a wide variance in operating conditions.The NDP EMS has been applied to "Qianghua-I",a prototype of a parallel HEV,using a revolving drum test bench for verification.Experiment results illustrate the potential of the proposed EMS in terms of fuel economy and in keeping state of charge (SOC) deviations at a low level.The proposed research ensures the optimality of NDP EMS,as well as real-time applicability.展开更多
The rapid consumption of fossil fuel and increased environmental damage caused by it have given a strong impetus to the growth and development of fuelefficient vehicles. Hybrid electric vehicles (HEVs) have evolved fr...The rapid consumption of fossil fuel and increased environmental damage caused by it have given a strong impetus to the growth and development of fuelefficient vehicles. Hybrid electric vehicles (HEVs) have evolved from their inchoate state and are proving to be a promising solution to the serious existential problem posed to the planet earth. Not only do HEVs provide better fuel economy and lower emissions satisfying environmental legislations, but also they dampen the effect of rising fuel prices on consumers. HEVs combine the drive powers of an internal combustion engine and an electrical machine. The main components of HEVs are energy storage system, motor, bidirectional converter and maximum power point trackers (MPPT, in case of solar-powered HEVs). The performance of HEVs greatly depends on these components and its architecture. This paper presents an extensive review on essential components used in HEVs such as their architectures with advantages and disadvantages, choice of bidirectional converter to obtain high efficiency, combining ultracapacitor with battery to extend the battery life, traction motors’ role and their suitability for a particular application. Inclusion of photovoltaic cell in HEVs is a fairly new concept and has been discussed in detail. Various MPPT techniques used for solar-driven HEVs are also discussed in this paper with their suitability.展开更多
A cloud computing based optimal driving method is proposed and its feasibility is validated through a real-world scenario simulation.Based on principles of vehicle dynamics,the driving optimization problem has been fo...A cloud computing based optimal driving method is proposed and its feasibility is validated through a real-world scenario simulation.Based on principles of vehicle dynamics,the driving optimization problem has been formulated into an optimal control problem constrained by traffic rules,directed at achieving lower equivalent fuel consumption and shorter travel time.In order to conveniently specify the constraints and facilitate the application of the dynamic programming(DP)algorithm,the driving optimization problem is transformed into spatial domain and discretized properly.Considering the heavy computational costs of the DP algorithm,a cloud computing based platform structure is proposed to solve the optimal driving problem in real-time.A case study is simulated based on a real-world traffic scenario in Matlab.Simulation results demonstrate that the cloud computing framework is promising toward realizing the real-time energy management for hybrid electric vehicles.展开更多
The operating mode of a single shaft hybrid electric vehicle(SSHEV)in which the electric motor exerts negative torque on the shaft to imitate engine braking is analyzed.The method of determining the quantity of regene...The operating mode of a single shaft hybrid electric vehicle(SSHEV)in which the electric motor exerts negative torque on the shaft to imitate engine braking is analyzed.The method of determining the quantity of regenerative braking torque is proposed with the premise that the braking intensity required by the driver is satisfied.On this basis,factors that affect torque generated by the motor are listed,and how the battery's temperature and state of charge(SOC)restrict and correct the braking torque is expounded.Finally,road test results show that the motor's constant power or constant torque control is an effective way to recover the mechanical energy during decelerating.展开更多
Environmental pollution and declining resources of fossil fuels in recent years,have increased demand for better fuel economy and less pollution for ground transportation.Among the alternative solutions provided by re...Environmental pollution and declining resources of fossil fuels in recent years,have increased demand for better fuel economy and less pollution for ground transportation.Among the alternative solutions provided by researchers in recent decades,hybrid electric vehicles consisted of an internal combustion engine and an electric motor have been considered as a promising solution in the short-term.In the present study,fuel economy characteristics of a parallel hybrid electric vehicle are investigated by using numerical simulation.The simulation methodology is based on a fast forward facing simulation model of a parallel hybrid and an internal combustion engine powertrains.The objective of this study is to present the main parameters which result in an optimum combination of hybrid powertrain components in order to obtain a better fuel economy of hybrid powertrains regarding different driven cycles and hybridization factors.Then,the fuel consumption of the parallel hybrid electric vehicles are compared considering various driven cycles and hybridization factors.The results showed that the better fuel economy of hybrid powertrains increases by decreasing average load of the test cycle and the point of the best fuel economy for a particular average load of the cycle moves towards higher hybridization factors when the average load of the test cycle is reduced.展开更多
Aiming to reduce fuel consumption and emissions of a dual-clutch hybrid electric vehicle during cold start, multiobjective optimization for fuel consumption and HC/CO emission from a TWC(three-way catalytic converter)...Aiming to reduce fuel consumption and emissions of a dual-clutch hybrid electric vehicle during cold start, multiobjective optimization for fuel consumption and HC/CO emission from a TWC(three-way catalytic converter) outlet is presented in this paper. DP(dynamic programming) considering dual-state variables is proposed based on the Bellman optimality principle. Both the battery SOC(state of charge) and the temperature of TWC monolith are considered in the algorithm simultaneously. In this way the global optimal control strategy and the Pareto optimal solution of multi-objective function are derived. Simulation results show that the proposed method is able to promote the TWC light-off significantly by decreasing the engine's load and improving exhaust temperature from the outlet of the engine, in comparison with original DP considering the single battery SOC. Compared to the results achieved by rule-based control strategy, fuel economy and emission of TWC outlet for cold start are optimized comprehensively. Each indicator of Pareto solution set shows the significant improvement.展开更多
A novel method of scheme design is proposed for power shifting transmissions of parallel hybrid electric vehicles(HEVs).First,shift sequences considering the path of power flow and shift logics are analyzed based on t...A novel method of scheme design is proposed for power shifting transmissions of parallel hybrid electric vehicles(HEVs).First,shift sequences considering the path of power flow and shift logics are analyzed based on the graph theory model,abstracted from the degree-of-freedom(DOF)of the schemes.Second,the scheme of gear-pair and shaft,defined as the scheme that ignores the arrangement of synchronizers,is derived from the basic configuration,defined as the scheme of gear-pair and shaft that contains only one of each type of the variable connections,and the numbers of each type of the variable connections.Finally,a multi-parameter scheme,including the arrangement of synchronizers and gear ratios,is designed to optimize the results of synthesis.This method helps to gain a deeper understanding of the systematic design of other fixed gear transmission schemes,such as automated mechanical transmission,dual clutch transmission,and even some novel multi-input transmission.展开更多
Hydraulic hybrid vehicles(HHV) with secondary regulation technology has the potential of improving fuel economy by operating the engine in the optimum efficiency range and making use of regenerative braking.Hydrostati...Hydraulic hybrid vehicles(HHV) with secondary regulation technology has the potential of improving fuel economy by operating the engine in the optimum efficiency range and making use of regenerative braking.Hydrostatic transmission technology has the advantage of higher power density and the ability to accept the high rates and high frequencies of charging and discharging, both of which are not favorable for batteries, but the lower energy density requires special power matching design and control strategy to coordinate all the powertrain components in an optimal manner.A multi-objective optimization method is proposed to distinguish the components size values of HHV by considering the requirements of driving cycles and technology aspects.The regenerative braking strategy and energy control strategy based on the optimized HHV is proposed to recovery the braking energy and distribute the regenerated braking energy.Simulation results show that by taking the optimized configuration of HHV, adopting the regenerative braking strategy and energy control strategy are helpful to improve the system efficiency and fuel economy of HHV under urban driving cycles.展开更多
Braking on low adhesion-coefficient roads, hybrid electric vehicle's motor regenerative torque is switched off to safeguard the normal anti-lock braking system(ABS) function.When the ABS control is terminated, the...Braking on low adhesion-coefficient roads, hybrid electric vehicle's motor regenerative torque is switched off to safeguard the normal anti-lock braking system(ABS) function.When the ABS control is terminated, the motor regenerative braking is readmitted.Aiming at avoiding permanent cycles from hydraulic anti-lock braking to motor regenerative braking, a novel electro-mechanical hybrid anti-lock braking system using fuzzy logic is designed.Different from the traditional single control structure, this system has a two-layered hierarchical structure.The first layer is responsible for harmonious adjustment or interaction between regenerative system and anti-lock braking system.The second layer is responsible for braking torque distribution and adjustment.The closed-loop simulation model is built.Control strategy and method for coordination between regenerative and anti-lock braking are developed.Simulation braking on low adhesion-coefficient roads with fuzzy logic control and real vehicle braking field test are presented.The results from simulating analysis and experiment show braking performance of the vehicle is perfect, harmonious coordination between regenerative and anti-lock braking function, significant amount of braking energy can be recovered and the proposed control strategy and method are effective.展开更多
With most countries paying attention to the environment protection, hybrid electric vehicles have become a focus of automobile research and development due to the characteristics of energy saving and low emission. Pow...With most countries paying attention to the environment protection, hybrid electric vehicles have become a focus of automobile research and development due to the characteristics of energy saving and low emission. Power follower control strategy(PFCS) and DC-link voltage control strategy are two sorts of control strategies for series hybrid electric vehicles(HEVs). Combining those two control strategies is a new idea for control strategy of series hybrid electric vehicles. By tuning essential parameters which are the defined constants under DClink voltage control and under PFCS, the points of minimum mass of equivalent fuel consumption(EFC) corresponding to a series of variables are marked for worldwide harmonized light vehicles test procedure(WLTP). The fuel economy of series HEVs with the combination control schemes performs better compared with individual control scheme. The results show the effects of the combination control schemes for series HEVs driving in an urban environment.展开更多
According to bench test results of fuel economy and engine emission for the real powertrain system of EQ7200HEV car, a 3-D performance map oriented quasi-linear model is developed for the configuration of the powertra...According to bench test results of fuel economy and engine emission for the real powertrain system of EQ7200HEV car, a 3-D performance map oriented quasi-linear model is developed for the configuration of the powertrain components such as internal combustion engine, traction electric motor, transmission, main retarder and energy storage unit. A genetic algorithm based on optimization procedure is proposed and applied for parametric optimization of the key components by consideration of requirements of some driving cycles. Through comparison of numerical results obtained by the genetic algorithm with those by traditional optimization methods, it is shown that the present approach is quite effective and efficient in emission reduction and fuel economy for the design of the hybrid electric car powertrain.展开更多
文摘As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybrid electric vehicles (HEVs) have been introduced to mitigate problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% of the desired SOC regardless of starting SOC.
基金the Research and Development department of EODH SA and has been co-financed by the European Regional Development Fund of the European Union and Greek national funds through the Operational Program Competitiveness,Entrepreneurship and Innovation,under the call RESEARCH-CREATE-INNOVATE(project code:T1EDK-04429).
文摘This paper is investigating the use of composite armour reinforced by nanomaterials, for the protection of light armoured(LAV) and medium armoured military vehicles(MAV), and the interaction between the composite materials and high-performance ballistic projectiles. Four armour materials, consisted of front hybrid fibre reinforced polymer cover layer, ceramic strike-face, fibre reinforced polymer intermediate layer and the metal matrix composite reinforced backplate, were manufactured and assembled by adhesive technology. The proposed laminated protection system is suitable for armoured ground vehicles;however, it could be used as armour on ground, air and naval platforms. The design of the protection system, including material selection and thickness, was elaborated depending on the performance requirements of Level 4 + STANAG 4569 military standard(projectile 14.5 mm × 114 mm API B32) and especially on a design philosophy which is analysed with the specifications. The backplate of this new composite is a hybrid material of Metal Matrix Composite(MMC) reinforced with carbon nanotubes(CNTs), manufactured with the use of powder metallurgy technique. The composite backplate material was morphologically, mechanically and chemically analysed. Results show that all plates are presenting high mechanical properties and ballistic characteristics, compared to commonly used armour plates. Real military ballistic tests according to AEP-STANAG 4569 were carried out for the total composite armour systems. After the ballistic tests, AA2024-CNT3 showed the best protection results, compared with the other plates(AA2024-CNT1 and AA2024-CNT2), with the projectile being unable to fully penetrate the composite plate.
文摘This paper develops a parallel hybrid electric vehicle(PHEV)propor-tional integral controller with driving cycle.To improve fuel efficiency and reduce hazardous emissions in hybrid electric vehicles(HEVs)combine an electric motor(EM),a battery and an internal combustion engine(ICE).The electric motor assists the engine when accelerating,driving longer highways or climbing hills.This enables the use of a smaller,more efficient engine.It also makes use of the concept of regenerative braking to maximize energy efficiency.In a Hybrid Electric Vehicle(HEV),energy dissipated while braking is utilized to charge the battery.The proportional integral controller was used in this paper to analyze engine,motor performance and the New European Driving Cycle(NEDC)was used in the vehicle driving test using Matlab/Simulink.The proportional integral controllers were designed to track the desired vehicle speed and manage the vehi-cle’s energyflow.The Sea Lion Optimization(SLnO)methods were created to reduce fuel consumption in a parallel hybrid electric vehicle and the results were obtained for the New European Driving Cycle.
文摘Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the main factors which affect HEV's fuel consumption, emission and performance. Therefore, optimal management of the energy components is a key element for the success of a HEV. An optimal energy management system is developed for HEV based on genetic algorithm. Then, different powertrain system component combinations effects are investigated in various driving cycles. HEV simulation results are compared for default rule-based, fuzzy and GA-fuzzy controllers by using ADVISOR. The results indicate the effectiveness of proposed optimal controller over real world driving cycles. Also, an optimal powertrain configuration to improve fuel consumption and emission efficiency is proposed for each driving condition. Finally, the effects of batteries in initial state of charge and hybridization factor are investigated on HEV performance to evaluate fuel consumption and emissions. Fuel consumption average reduction of about 14% is obtained for optimal configuration data in contrast to default configuration. Also results indicate that proposed controller has reduced emission of about 10% in various traffic conditions.
文摘The paper proposes an adoption of slope,elevation,speed and route distance preview to achieve optimal energymanagement of plug-in hybrid electric vehicles(PHEVs).Theapproach is to identify route features from historical and real-time traffic data,in which information fusion model and trafficprediction model are used to improve the information accuracy.Then,dynamic programming combined with equivalent con-sumption minimization strategy is used to compute an optimalsolution for real-time energy management.The solution is thereference for PHEV energy management control along the route.To improve the system's ability of handling changing situation,the study further explores predictive control model in the real-time control of the energy.A simulation is performed to modelPHEV under above energy control strategy with route preview.The results show that the average fuel consumption of PHEValong the previewed route with model predictive control(MPC)strategy can be reduced compared with optimal strategy andbase control strategy.
文摘In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is divided into power mode and economy mode. Energy management strategy designing methods of power mode and economy mode are proposed. Maximum velocity, acceleration performance and fuel consumption are simulated during the CS period in the AVL CRUISE simulation environment. The simulation results indicate that the maximum velocity and acceleration time of the power mode are better than those in the economy mode. Fuel consumption of the economy mode is better than that in the power mode. Fuel consumption of PHEV during the CS period is further improved by using the methods proposed in this paper, and this is meaningful for research and development of PHEV.
基金Project(2007CB209707) supported by the National Basic Research Program of China
文摘In order to achieve the improvement of the driving comfort and energy efficiency,an new e-CVT flexible full hybrid electric system(E2FHS) is proposed,which uses an integrated main drive motor and generator to take the place of the original automatic or manual transmission to realize the functions of continuously variable transmission(e-CVT).The design and prototype realization of the E2FHS system for a plug-in hybrid vehicle(PHEV) is performed.In order to analyze and optimize the parameters and the power flux between different parts of the E2FHS,simulation software is developed.Especially,in order to optimize the performance of the energy economy improvement of the E2FHS,the effect of the different energy management controllers is investigated,and an adaptive online-optimal energy management controller for the E2FHS is built and validated by the prototype PHEV.
文摘In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, based on simulations with three different driving cycles. The investigated hybrid energy storage topologies are an energy optimized lithium-ion battery (HE) in combination with an Electrical Double-Layer Capacitor (EDLC) system, in combination with a power optimized lithium-ion battery (HP) system or in combination with a Lithium-ion Capacitor (LiCap) system, that act as a Peak Power System. From the simulation results it was observed that hybridization of the HE lithium-ion based energy storage system resulted from the three topologies in an increased overall energy efficiency of the RESS, in an extended all electric range of the PHEV and in a reduced average current through the HE battery. The lowest consumption during the three driving cycles was obtained for the HE-LiCap topology, where fuel savings of respectively 6.0%, 10.3% and 6.8% compared with the battery stand-alone system were achieved. The largest extension of the range was achieved for the HE-HP configuration (17% based on FTP-75 driving cycle). HP batteries however have a large internal resistance in comparison to EDLC and LiCap systems, which resulted in a reduced overall energy efficiency of the hybrid RESS. Additionally, it was observed that the HP and LiCap systems both offer significant benefits for the integration of a peak power system in the drivetrain of a Plug-in Hybrid Electric Vehicle due to their low volume and weight in comparison to that of the EDLC system.
基金supported by Innovation Technology Fund of the Hong Kong Special Administrative Region of China (Grant No. GHP/011/05)
文摘Improvements in hybrid electric vehicle (HEV) fuel economy and emissions heavily depend on an efficient energy management strategy (EMS).However,the uncertainty of future driving conditions generally cannot be easily tackled in EMS design.Most existing EMSs act upon fixed parameters and cannot adapt to varying driving conditions.Therefore,they usually fail to fully explore the potential of these advanced vehicles.In this paper,a novel EMS design procedure based on neural dynamic programming (NDP) is proposed.The NDP is a generic online learning algorithm,which combines stochastic dynamic programming (SDP) and the temporal difference (TD) method.Instead of computing the utility function and optimal control actions through Bellman equations,the NDP algorithm uses two neural networks to approximate them.The weights of these neural networks are updated online by the TD method.It avoids the high computational cost that SDP suffers from and is suitable for real-time implementation.The main advantages of NDP EMS is that it does not rely on prior information related to future driving conditions,and can self-tune with a wide variance in operating conditions.The NDP EMS has been applied to "Qianghua-I",a prototype of a parallel HEV,using a revolving drum test bench for verification.Experiment results illustrate the potential of the proposed EMS in terms of fuel economy and in keeping state of charge (SOC) deviations at a low level.The proposed research ensures the optimality of NDP EMS,as well as real-time applicability.
文摘The rapid consumption of fossil fuel and increased environmental damage caused by it have given a strong impetus to the growth and development of fuelefficient vehicles. Hybrid electric vehicles (HEVs) have evolved from their inchoate state and are proving to be a promising solution to the serious existential problem posed to the planet earth. Not only do HEVs provide better fuel economy and lower emissions satisfying environmental legislations, but also they dampen the effect of rising fuel prices on consumers. HEVs combine the drive powers of an internal combustion engine and an electrical machine. The main components of HEVs are energy storage system, motor, bidirectional converter and maximum power point trackers (MPPT, in case of solar-powered HEVs). The performance of HEVs greatly depends on these components and its architecture. This paper presents an extensive review on essential components used in HEVs such as their architectures with advantages and disadvantages, choice of bidirectional converter to obtain high efficiency, combining ultracapacitor with battery to extend the battery life, traction motors’ role and their suitability for a particular application. Inclusion of photovoltaic cell in HEVs is a fairly new concept and has been discussed in detail. Various MPPT techniques used for solar-driven HEVs are also discussed in this paper with their suitability.
基金Supported by the National Nature Science Foundation of China(5177503951861135301)
文摘A cloud computing based optimal driving method is proposed and its feasibility is validated through a real-world scenario simulation.Based on principles of vehicle dynamics,the driving optimization problem has been formulated into an optimal control problem constrained by traffic rules,directed at achieving lower equivalent fuel consumption and shorter travel time.In order to conveniently specify the constraints and facilitate the application of the dynamic programming(DP)algorithm,the driving optimization problem is transformed into spatial domain and discretized properly.Considering the heavy computational costs of the DP algorithm,a cloud computing based platform structure is proposed to solve the optimal driving problem in real-time.A case study is simulated based on a real-world traffic scenario in Matlab.Simulation results demonstrate that the cloud computing framework is promising toward realizing the real-time energy management for hybrid electric vehicles.
基金Supported by the National High Technology Research and Development Program of China(2011AA11A252)
文摘The operating mode of a single shaft hybrid electric vehicle(SSHEV)in which the electric motor exerts negative torque on the shaft to imitate engine braking is analyzed.The method of determining the quantity of regenerative braking torque is proposed with the premise that the braking intensity required by the driver is satisfied.On this basis,factors that affect torque generated by the motor are listed,and how the battery's temperature and state of charge(SOC)restrict and correct the braking torque is expounded.Finally,road test results show that the motor's constant power or constant torque control is an effective way to recover the mechanical energy during decelerating.
文摘Environmental pollution and declining resources of fossil fuels in recent years,have increased demand for better fuel economy and less pollution for ground transportation.Among the alternative solutions provided by researchers in recent decades,hybrid electric vehicles consisted of an internal combustion engine and an electric motor have been considered as a promising solution in the short-term.In the present study,fuel economy characteristics of a parallel hybrid electric vehicle are investigated by using numerical simulation.The simulation methodology is based on a fast forward facing simulation model of a parallel hybrid and an internal combustion engine powertrains.The objective of this study is to present the main parameters which result in an optimum combination of hybrid powertrain components in order to obtain a better fuel economy of hybrid powertrains regarding different driven cycles and hybridization factors.Then,the fuel consumption of the parallel hybrid electric vehicles are compared considering various driven cycles and hybridization factors.The results showed that the better fuel economy of hybrid powertrains increases by decreasing average load of the test cycle and the point of the best fuel economy for a particular average load of the cycle moves towards higher hybridization factors when the average load of the test cycle is reduced.
基金Funded by National Natural Science Foundation of China(No.51305472)National Natural Science Foundation of Chongqing Science and Technology Committee(No.cstc2014jcyj A60005)Natural Science Foundation of Chongqing Education Committee(No.KJ1400312)
文摘Aiming to reduce fuel consumption and emissions of a dual-clutch hybrid electric vehicle during cold start, multiobjective optimization for fuel consumption and HC/CO emission from a TWC(three-way catalytic converter) outlet is presented in this paper. DP(dynamic programming) considering dual-state variables is proposed based on the Bellman optimality principle. Both the battery SOC(state of charge) and the temperature of TWC monolith are considered in the algorithm simultaneously. In this way the global optimal control strategy and the Pareto optimal solution of multi-objective function are derived. Simulation results show that the proposed method is able to promote the TWC light-off significantly by decreasing the engine's load and improving exhaust temperature from the outlet of the engine, in comparison with original DP considering the single battery SOC. Compared to the results achieved by rule-based control strategy, fuel economy and emission of TWC outlet for cold start are optimized comprehensively. Each indicator of Pareto solution set shows the significant improvement.
基金Supported by the National Natural Science Foundation of China(U1764257)。
文摘A novel method of scheme design is proposed for power shifting transmissions of parallel hybrid electric vehicles(HEVs).First,shift sequences considering the path of power flow and shift logics are analyzed based on the graph theory model,abstracted from the degree-of-freedom(DOF)of the schemes.Second,the scheme of gear-pair and shaft,defined as the scheme that ignores the arrangement of synchronizers,is derived from the basic configuration,defined as the scheme of gear-pair and shaft that contains only one of each type of the variable connections,and the numbers of each type of the variable connections.Finally,a multi-parameter scheme,including the arrangement of synchronizers and gear ratios,is designed to optimize the results of synthesis.This method helps to gain a deeper understanding of the systematic design of other fixed gear transmission schemes,such as automated mechanical transmission,dual clutch transmission,and even some novel multi-input transmission.
基金supported by National Natural Science Foundation of China (Grant No. 50875054)National Key Laboratory of Vehicular Transmission of China (Grant No. 51457050105HT0112).
文摘Hydraulic hybrid vehicles(HHV) with secondary regulation technology has the potential of improving fuel economy by operating the engine in the optimum efficiency range and making use of regenerative braking.Hydrostatic transmission technology has the advantage of higher power density and the ability to accept the high rates and high frequencies of charging and discharging, both of which are not favorable for batteries, but the lower energy density requires special power matching design and control strategy to coordinate all the powertrain components in an optimal manner.A multi-objective optimization method is proposed to distinguish the components size values of HHV by considering the requirements of driving cycles and technology aspects.The regenerative braking strategy and energy control strategy based on the optimized HHV is proposed to recovery the braking energy and distribute the regenerated braking energy.Simulation results show that by taking the optimized configuration of HHV, adopting the regenerative braking strategy and energy control strategy are helpful to improve the system efficiency and fuel economy of HHV under urban driving cycles.
基金supported by National Development and Reform Commission of China (Grant No. 2005934)
文摘Braking on low adhesion-coefficient roads, hybrid electric vehicle's motor regenerative torque is switched off to safeguard the normal anti-lock braking system(ABS) function.When the ABS control is terminated, the motor regenerative braking is readmitted.Aiming at avoiding permanent cycles from hydraulic anti-lock braking to motor regenerative braking, a novel electro-mechanical hybrid anti-lock braking system using fuzzy logic is designed.Different from the traditional single control structure, this system has a two-layered hierarchical structure.The first layer is responsible for harmonious adjustment or interaction between regenerative system and anti-lock braking system.The second layer is responsible for braking torque distribution and adjustment.The closed-loop simulation model is built.Control strategy and method for coordination between regenerative and anti-lock braking are developed.Simulation braking on low adhesion-coefficient roads with fuzzy logic control and real vehicle braking field test are presented.The results from simulating analysis and experiment show braking performance of the vehicle is perfect, harmonious coordination between regenerative and anti-lock braking function, significant amount of braking energy can be recovered and the proposed control strategy and method are effective.
基金supported in part by the National Natural Science Foundation of China(61773382,61773381,61533019)Chinese Guangdongs S&T projects(2016B090910001,2017B090912001)+1 种基金2016 S&T Benefiting Special Project(16-6-2-62-nsh)of Qingdao Achievements Transformation ProgramDongguan Innovation Talents Project(Gang Xiong)
文摘With most countries paying attention to the environment protection, hybrid electric vehicles have become a focus of automobile research and development due to the characteristics of energy saving and low emission. Power follower control strategy(PFCS) and DC-link voltage control strategy are two sorts of control strategies for series hybrid electric vehicles(HEVs). Combining those two control strategies is a new idea for control strategy of series hybrid electric vehicles. By tuning essential parameters which are the defined constants under DClink voltage control and under PFCS, the points of minimum mass of equivalent fuel consumption(EFC) corresponding to a series of variables are marked for worldwide harmonized light vehicles test procedure(WLTP). The fuel economy of series HEVs with the combination control schemes performs better compared with individual control scheme. The results show the effects of the combination control schemes for series HEVs driving in an urban environment.
文摘According to bench test results of fuel economy and engine emission for the real powertrain system of EQ7200HEV car, a 3-D performance map oriented quasi-linear model is developed for the configuration of the powertrain components such as internal combustion engine, traction electric motor, transmission, main retarder and energy storage unit. A genetic algorithm based on optimization procedure is proposed and applied for parametric optimization of the key components by consideration of requirements of some driving cycles. Through comparison of numerical results obtained by the genetic algorithm with those by traditional optimization methods, it is shown that the present approach is quite effective and efficient in emission reduction and fuel economy for the design of the hybrid electric car powertrain.