The transportation sector is responsible for 25% of the total Carbon dioxide (CO2) emissions, whereas 60.6% of this sector represents small and medium passenger cars. However, as noted by the European Union Long-term ...The transportation sector is responsible for 25% of the total Carbon dioxide (CO2) emissions, whereas 60.6% of this sector represents small and medium passenger cars. However, as noted by the European Union Long-term strategy, there are two ways to reduce the amount of CO2 emissions in the transportation sector. The first way is characterized by creating more efficient vehicles. In contrast, the second way is characterized by changing the fuel used. The current study addressed the second way, changing the fuel type. The study examined the potential of battery electric vehicles (BEVs) as an alternative fuel type to reduce CO2 emissions in Hungarys transportation sector. The study used secondary data retrieved from Statista and stata.com to analyze the future trends of BEVs in Hungary. The results showed that the percentage of BEVs in Hungary in 2022 was 0.4% compared to the total number of registered passenger cars, which is 3.8 million. The simple exponential smoothing (SES) time series forecast revealed that the number of BEVs is expected to reach 84,192 in 2030, indicating a percentage increase of 2.21% in the next eight years. The study suggests that increasing the number of BEVs is necessary to address the negative impact of CO2 emissions on society. The Hungarian Ministry of Innovation and Technologys strategy to reduce the cost of BEVs may increase the percentage of BEVs by 10%, resulting in a potential average reduction of 76,957,600 g/km of CO2 compared to gasoline, diesel, hybrid electric vehicles (HEVs), and plug-in hybrid vehicles (PHEVs).展开更多
The paper proposes an adoption of slope,elevation,speed and route distance preview to achieve optimal energymanagement of plug-in hybrid electric vehicles(PHEVs).Theapproach is to identify route features from historic...The paper proposes an adoption of slope,elevation,speed and route distance preview to achieve optimal energymanagement of plug-in hybrid electric vehicles(PHEVs).Theapproach is to identify route features from historical and real-time traffic data,in which information fusion model and trafficprediction model are used to improve the information accuracy.Then,dynamic programming combined with equivalent con-sumption minimization strategy is used to compute an optimalsolution for real-time energy management.The solution is thereference for PHEV energy management control along the route.To improve the system's ability of handling changing situation,the study further explores predictive control model in the real-time control of the energy.A simulation is performed to modelPHEV under above energy control strategy with route preview.The results show that the average fuel consumption of PHEValong the previewed route with model predictive control(MPC)strategy can be reduced compared with optimal strategy andbase control strategy.展开更多
In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is d...In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is divided into power mode and economy mode. Energy management strategy designing methods of power mode and economy mode are proposed. Maximum velocity, acceleration performance and fuel consumption are simulated during the CS period in the AVL CRUISE simulation environment. The simulation results indicate that the maximum velocity and acceleration time of the power mode are better than those in the economy mode. Fuel consumption of the economy mode is better than that in the power mode. Fuel consumption of PHEV during the CS period is further improved by using the methods proposed in this paper, and this is meaningful for research and development of PHEV.展开更多
The increased concern over global climate change and lack of long-term sustainability of fossil fuels in the projected future has prompted further research into advanced alternative fuel vehicles to reduce vehicle emi...The increased concern over global climate change and lack of long-term sustainability of fossil fuels in the projected future has prompted further research into advanced alternative fuel vehicles to reduce vehicle emissions and fuel consumption. One of the primary advanced vehicle research areas involves electrification and hybridization of vehicles. As hybrid-electric vehicle technology has advanced, so has the need for more innovative control schemes for hybrid vehicles, including the development and optimization of hybrid powertrain transmission shift schedules. The hybrid shift schedule works in tandem with a cost function-based torque split algorithm that dynamically determines the optimal torque command for the electric motor and engine. The focus of this work is to develop and analyze the benefits and limitations of two different shift schedules for a position-3 (P3) parallel hybrid-electric vehicle. a traditional two-parameter shift schedule that operates as a function of vehicle accelerator position and vehicle speed (state of charge (SOC) independent shift schedule), and a three-parameter shift schedule that also adapts to fluctuations in the state of charge of the high voltage batteries (SOC dependent shift schedule). The shift schedules were generated using an exhaustive search coupled with a fitness function to evaluate all possible vehicle operating points. The generated shift schedules were then tested in the software-in-the-loop (SIL) environment and the vehicle-in-the-loop (VIL) environment and compared to each other, as well as to the stock 8L45 8-speed transmission shift schedule. The results show that both generated shift schedules improved upon the stock transmission shift schedule used in the hybrid powertrain comparing component efficiency, vehicle efficiency, engine fuel economy, and vehicle fuel economy.展开更多
In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, ba...In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, based on simulations with three different driving cycles. The investigated hybrid energy storage topologies are an energy optimized lithium-ion battery (HE) in combination with an Electrical Double-Layer Capacitor (EDLC) system, in combination with a power optimized lithium-ion battery (HP) system or in combination with a Lithium-ion Capacitor (LiCap) system, that act as a Peak Power System. From the simulation results it was observed that hybridization of the HE lithium-ion based energy storage system resulted from the three topologies in an increased overall energy efficiency of the RESS, in an extended all electric range of the PHEV and in a reduced average current through the HE battery. The lowest consumption during the three driving cycles was obtained for the HE-LiCap topology, where fuel savings of respectively 6.0%, 10.3% and 6.8% compared with the battery stand-alone system were achieved. The largest extension of the range was achieved for the HE-HP configuration (17% based on FTP-75 driving cycle). HP batteries however have a large internal resistance in comparison to EDLC and LiCap systems, which resulted in a reduced overall energy efficiency of the hybrid RESS. Additionally, it was observed that the HP and LiCap systems both offer significant benefits for the integration of a peak power system in the drivetrain of a Plug-in Hybrid Electric Vehicle due to their low volume and weight in comparison to that of the EDLC system.展开更多
Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the mai...Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the main factors which affect HEV's fuel consumption, emission and performance. Therefore, optimal management of the energy components is a key element for the success of a HEV. An optimal energy management system is developed for HEV based on genetic algorithm. Then, different powertrain system component combinations effects are investigated in various driving cycles. HEV simulation results are compared for default rule-based, fuzzy and GA-fuzzy controllers by using ADVISOR. The results indicate the effectiveness of proposed optimal controller over real world driving cycles. Also, an optimal powertrain configuration to improve fuel consumption and emission efficiency is proposed for each driving condition. Finally, the effects of batteries in initial state of charge and hybridization factor are investigated on HEV performance to evaluate fuel consumption and emissions. Fuel consumption average reduction of about 14% is obtained for optimal configuration data in contrast to default configuration. Also results indicate that proposed controller has reduced emission of about 10% in various traffic conditions.展开更多
With proper power scheduling and dynamic pricing,a unidirectional charger can provide benefits and regulation services to the electricity grid,at a level approaching that of bidirectional charging.Power scheduling and...With proper power scheduling and dynamic pricing,a unidirectional charger can provide benefits and regulation services to the electricity grid,at a level approaching that of bidirectional charging.Power scheduling and schedule flexibility of electric and plug-in hybrid vehicles are addressed.The use of electric vehicles(EVs)as flexibility resources and associated unidirectional vehicle-to-grid benefits are investigated.Power can be scheduled with the EV charger in control of charging or via control by a utility or an aggregator.Charging cost functions suitable for charger-and utility-controlled power scheduling are presented.Ancillary service levels possible with unidirectional vehicle-to-grid are quantified using sample charging scenarios from published data.Impacts of various power schedules and vehicle participation as a flexibility resource on electricity locational prices are evaluated.These include benefits to both owners and load-serving entities.Frequency regulation is considered in the context of unidirectional charging.展开更多
There are lots of factors that can influence the wireless charging efficiency in practice, such as misalignment and air-gap difference, which can also change all the charging parameters. To figure out the relationship...There are lots of factors that can influence the wireless charging efficiency in practice, such as misalignment and air-gap difference, which can also change all the charging parameters. To figure out the relationship between those facts and system, this paper presents a serial-parallel compensated(SPC) topology for electric vehicle/plug-in hybrid electric vehicle(EV/PHEV) wireless charger and provides all the parameters changing with corresponding curves. An ANSYS model is built to extract the coupling coefficient of coils. When the system is works at constant output power, the scan frequency process can be applied to wireless power transfer(WPT) and get the resonant frequency. In this way, it could determine the best frequency for system to achieve zero voltage switching status and force the system to hit the maximum transmission efficiency. Then frequency tracking control(FTC) is used to obtain the highest system efficiency. In the paper, the designed system is rated at 500 W with 15 cm air-gap, the overall efficiency is 92%. At the end, the paper also gives the consideration on how to improve the system efficiency.展开更多
This paper presents a study undertaken to understand the plug-in vehicle acceptance and probable utilization behaviour in terms of charging habits and utility factor (probability of driving in electrical mode). A surv...This paper presents a study undertaken to understand the plug-in vehicle acceptance and probable utilization behaviour in terms of charging habits and utility factor (probability of driving in electrical mode). A survey was designed to be answered via World Wide Web, throughout 3 months and only accessible to Portuguese inhabitants. The survey was composed by biographical and car ownership info, mobility patterns, awareness toward plug-in vehicle technologies, price premium and, finally, potential buyer’s attitudes regarding charging vehicles with electricity from the grid. An explanation of how each vehicle technology works in the case of a regular hybrid (HEV), a plug-in hybrid (PHEV) and a pure electric vehicle (EV) was provided. A total sample of 809 volunteers answered the survey, aged above 18 years old, 50% male and 50% female. The results allowed the estimation of the typical daily driving distance, the Utility Factor curve for plug-in hybrid future users, the charging preferences for future users of pure electric or plug-in hybrid vehicles and the necessary feebates to promote the market penetration of such technologies. Other correlations were also analyzed between driving patterns, type of owned car, price premium and the willingness to buy pure electric and plug-in hybrid vehicles. The main policy implications are that an increase of awareness campaigns is necessary if the government intends to support the plug-in electric vehicle technology widespread and a minimum of 5000 € investment per ton of avoided CO2 will be necessary in a year.展开更多
The plug-in hybrid vehicles(PHEV)technology can effectively address the issues of poor dynamics and higher energy consumption commonly found in traditional mining dump trucks.Meanwhile,plug-in hybrid electric trucks c...The plug-in hybrid vehicles(PHEV)technology can effectively address the issues of poor dynamics and higher energy consumption commonly found in traditional mining dump trucks.Meanwhile,plug-in hybrid electric trucks can achieve excellent fuel economy through efficient energy management strategies(EMS).Therefore,a series hybrid system is constructed based on a 100-ton mining dump truck in this paper.And inspired by the dynamic programming(DP)algorithm,a predictive equivalent consumption minimization strategy(P-ECMS)based on the DP optimization result is proposed.Based on the optimal control manifold and the SOC reference trajectory obtained by the DP algorithm,the P-ECMS strategy performs real-time stage parameter optimization to obtain the optimal equivalent factor(EF).Finally,applying the equivalent consumption minimization strategy(ECMS)realizes real-time control.The simulation results show that the equivalent fuel consumption of the P-ECMS strategy under the experimentally collected mining cycle conditions is 150.8 L/100 km,which is 10.9%less than that of the common CDCS strategy(169.3 L/100 km),and achieves 99.47%of the fuel saving effect of the DP strategy(150 L/100 km).展开更多
Achieving accurate speed prediction provides the most critical support parameter for high-level energy management of plug-in hybrid electric vehicles.Nowadays,people often drive a vehicle on fixed routes in their dail...Achieving accurate speed prediction provides the most critical support parameter for high-level energy management of plug-in hybrid electric vehicles.Nowadays,people often drive a vehicle on fixed routes in their daily travels and accurate speed predictions of these routes are possible with random prediction and machine learning,but the prediction accuracy still needs to be improved.The prediction accuracy of traditional prediction algorithms is difficult to further improve after reaching a certain accuracy;problems,such as over fitting,occur in the process of improving prediction accuracy.The combined prediction model proposed in this paper can abandon the transitional dependence on a single prediction.By combining the two prediction algorithms,the fusion of prediction performance is achieved,the limit of the single prediction performance is crossed,and the goal of improving vehicle speed prediction performance is achieved.In this paper,an extraction method suitable for fixed route vehicle speed is designed.The application of Markov and back propagation(BP)neural network in predictions is introduced.Three new combined prediction methods,all named Markov and BP Neural Network(MBNN)combined prediction algorithm,are proposed,which make full use of the advantages of Markov and BP neural network algorithms.Finally,the comparison among the prediction methods has been carried out.The results show that the three MBNN models have improved by about 19%,28%,and 29%compared with the Markov prediction model,which has better performance in the single prediction models.Overall,the MBNN combined prediction models can improve the prediction accuracy by 25.3%on average,which provides important support for the possible optimization of plug-in hybrid electric vehicle energy consumption.展开更多
The study of series–parallel plug-in hybrid electric vehicles(PHEVs)has become a research hotspot in new energy vehicles.The global optimal Pareto solutions of energy management strategy(EMS)play a crucial role in th...The study of series–parallel plug-in hybrid electric vehicles(PHEVs)has become a research hotspot in new energy vehicles.The global optimal Pareto solutions of energy management strategy(EMS)play a crucial role in the development of PHEVs.This paper presents a multi-objective global optimization algorithm for the EMS of PHEVs.The algorithm combines the Radau Pseudospectral Knotting Method(RPKM)and the Nondominated Sorting Genetic Algorithm(NSGA)-II to optimize both energy conservation and battery lifespan under the suburban driving conditions of the New European Driving Cycle.The driving conditions are divided into stages at evident mode switching points and the optimal objectives are computed using RPKM.The RPKM results serve as the fitness values in iteration through the NSGA-II method.The results of the algorithm applied to a PHEV simulation show a 26.74%–53.87%improvement in both objectives after 20 iterations compared to the solutions obtained using only RPKM.The proposed algorithm is evaluated against the weighting dynamic programming and is found to be close to the global optimality,with the added benefits of faster and more uniform solutions.展开更多
Nowadays,utilities aim to find methods for improving the reliability of distribution systems and satisfying the customers by providing the continuity of power supply.Different methodologies exist for utilities to impr...Nowadays,utilities aim to find methods for improving the reliability of distribution systems and satisfying the customers by providing the continuity of power supply.Different methodologies exist for utilities to improve the reliability of network.In this paper,demand response(DR)programs and smart charging/discharging of plug-in electric vehicles(PEVs)are investigated for improving the reliability of radial distribution systems adopting particle swarm optimization(PSO)algorithm.Such analysis is accomplished due to the positive effects of both DR and PEVs for dealing with emerging challenges of the world such as fossil fuel reserves reduction,urban air pollution and greenhouse gas emissions.Additionally,the prioritization of DR and PEVs is presented for improving the reliability and analyzing the characteristics of distribution networks.The reliability analysis is performed in terms of loss of load expectation(LOLE)and expected energy not served(EENS)indexes,where the characteristics contain load profile,load peak,voltage profile and energy loss.Numerical simulations are accomplished to assess the effectiveness and practicality of the proposed scheme.展开更多
Plug-in electric vehicle(PEV) load modeling is very important in the operation and planning studies of modern power system nowadays. Several parameters and considerations should be taken into account in PEV load model...Plug-in electric vehicle(PEV) load modeling is very important in the operation and planning studies of modern power system nowadays. Several parameters and considerations should be taken into account in PEV load modeling, making it a complex problem that should be solved using appropriate techniques. Different techniques have been introduced for PEV load modeling and each of them has individual specifications and features. In this paper, the most popular techniques for PEV load modeling are reviewed and their capabilities are evaluated. Both deterministic and probabilistic methods are investigated and some practical and theoretical hints are presented. Moreover, the characteristics of all techniques are compared with each other and suitable methods for unique applications are proposed. Finally, some potential research areas are presented for future works.展开更多
In this paper,the microgrid economic scheduling mathematical model considering the integration of plug-in hybrid electric vehicles(PHEVs)is presented and the influence of different charging and discharging modes on mi...In this paper,the microgrid economic scheduling mathematical model considering the integration of plug-in hybrid electric vehicles(PHEVs)is presented and the influence of different charging and discharging modes on microgrid economic operation is analyzed.The generic algorithm is used to find an economically optimal solution for the microgrid and PHEV owners.The scheduling of PHEVs and the microgrid are optimized to reduce daily electricity cost and the potential benefits of controlled charging/discharging are explored systematically.Constraints caused by vehicle utilization as well as technical limitations of distributed generation and energy storage system are taken into account.The proposed economic scheduling is evaluated through a simulation by using a typical grid-connected microgrid model.展开更多
Purpose:The increase in plug-in electric vehicles(PEVs)is likely to see a noteworthy impact on the distribution system due to high electric power consumption during charging and uncertainty in charging behavior.To add...Purpose:The increase in plug-in electric vehicles(PEVs)is likely to see a noteworthy impact on the distribution system due to high electric power consumption during charging and uncertainty in charging behavior.To address this problem,the present work mainly focuses on optimal integration of distributed generators(DG)into radial distribution systems in the presence of PEV loads with their charging behavior under daily load pattern including load models by considering the daily(24 h)power loss and voltage improvement of the system as objectives for better system performance.Design/methodology/approach:To achieve the desired outcomes,an efficient weighted factor multi-objective function is modeled.Particle Swarm Optimization(PSO)and Butterfly Optimization(BO)algorithms are selected and implemented to minimize the objectives of the system.A repetitive backward-forward sweep-based load flow has been introduced to calculate the daily power loss and bus voltages of the radial distribution system.The simulations are carried out using MATLAB software.Findings:The simulation outcomes reveal that the proposed approach definitely improved the system performance in all aspects.Among PSO and BO,BO is comparatively successful in achieving the desired objectives.Originality/value:The main contribution of this paper is the formulation of the multi-objective function that can address daily active power loss and voltage deviation under 24-h load pattern including grouping of residential,industrial and commercial loads.Introduction of repetitive backward-forward sweep-based load flow and the modeling of PEV load with two different charging scenarios.展开更多
This study is laser focused on the simulation of fuel consumption and fuel economy label parameters of plug-in hybrid electric vehicles.While fuel economy is a key factor in the design of plug-in hybrid electric vehic...This study is laser focused on the simulation of fuel consumption and fuel economy label parameters of plug-in hybrid electric vehicles.While fuel economy is a key factor in the design of plug-in hybrid electric vehicles,a fuel economy label can educate customers about the economic advantage of purchasing a particular car.The fuel economy label of a PHEV consists of parameters like driving range,electrical energy consumption,fuel economy for city,highway,and combined use,battery recharge time,and fuel consumption rates.The study used an inverse function model of an artificial neural network to simulate and calculate the parameters of the fuel economy labels of PHEVs.Firstly,the selected parameters of the fuel economy label of plug-in hybrid electric vehicles were used to develop a single output model.The output variable of the single output model was then merged with dummy functions to form input variables for the inverse function model.The output variables simulated were engine size in litres;estimated driving range when the battery is fully charged in km,battery recharged time in hours,city fuel consumption(L/100 km),highway fuel consumption(L/100 km),combined fuel consumption(L/100 km),estimated driving range when the tank is full,carbon dioxide(CO_(2))emission in grams/km,electric motor power in kW,number of cylinders,and electrical charges consumed in kWh/100 km.Different cases of input variables were considered for the inverse function model.The accuracy of the model was 29.1 times greater than that of the conventional inverse artificial neural network model.展开更多
Economic and environmental load dispatch aims to determine the amount of electricity generated from power plants to meet load demand while minimizing fossil fuel costs and air pollution emissions subject to operationa...Economic and environmental load dispatch aims to determine the amount of electricity generated from power plants to meet load demand while minimizing fossil fuel costs and air pollution emissions subject to operational and licensing requirements.These two scheduling problems are commonly formulated with non-smooth cost functions respectively considering various effects and constraints,such as the valve point effect,power balance and ramprate limits.The expected increase in plug-in electric vehicles is likely to see a significant impact on the power system due to high charging power consumption and significant uncertainty in charging times.In this paper,multiple electric vehicle charging profiles are comparatively integrated into a 24-hour load demand in an economic and environment dispatch model.Self-learning teaching-learning based optimization(TLBO)is employed to solve the non-convex non-linear dispatch problems.Numerical results onwell-known benchmark functions,as well as test systems with different scales of generation units show the significance of the new scheduling method.展开更多
文摘The transportation sector is responsible for 25% of the total Carbon dioxide (CO2) emissions, whereas 60.6% of this sector represents small and medium passenger cars. However, as noted by the European Union Long-term strategy, there are two ways to reduce the amount of CO2 emissions in the transportation sector. The first way is characterized by creating more efficient vehicles. In contrast, the second way is characterized by changing the fuel used. The current study addressed the second way, changing the fuel type. The study examined the potential of battery electric vehicles (BEVs) as an alternative fuel type to reduce CO2 emissions in Hungarys transportation sector. The study used secondary data retrieved from Statista and stata.com to analyze the future trends of BEVs in Hungary. The results showed that the percentage of BEVs in Hungary in 2022 was 0.4% compared to the total number of registered passenger cars, which is 3.8 million. The simple exponential smoothing (SES) time series forecast revealed that the number of BEVs is expected to reach 84,192 in 2030, indicating a percentage increase of 2.21% in the next eight years. The study suggests that increasing the number of BEVs is necessary to address the negative impact of CO2 emissions on society. The Hungarian Ministry of Innovation and Technologys strategy to reduce the cost of BEVs may increase the percentage of BEVs by 10%, resulting in a potential average reduction of 76,957,600 g/km of CO2 compared to gasoline, diesel, hybrid electric vehicles (HEVs), and plug-in hybrid vehicles (PHEVs).
文摘The paper proposes an adoption of slope,elevation,speed and route distance preview to achieve optimal energymanagement of plug-in hybrid electric vehicles(PHEVs).Theapproach is to identify route features from historical and real-time traffic data,in which information fusion model and trafficprediction model are used to improve the information accuracy.Then,dynamic programming combined with equivalent con-sumption minimization strategy is used to compute an optimalsolution for real-time energy management.The solution is thereference for PHEV energy management control along the route.To improve the system's ability of handling changing situation,the study further explores predictive control model in the real-time control of the energy.A simulation is performed to modelPHEV under above energy control strategy with route preview.The results show that the average fuel consumption of PHEValong the previewed route with model predictive control(MPC)strategy can be reduced compared with optimal strategy andbase control strategy.
文摘In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is divided into power mode and economy mode. Energy management strategy designing methods of power mode and economy mode are proposed. Maximum velocity, acceleration performance and fuel consumption are simulated during the CS period in the AVL CRUISE simulation environment. The simulation results indicate that the maximum velocity and acceleration time of the power mode are better than those in the economy mode. Fuel consumption of the economy mode is better than that in the power mode. Fuel consumption of PHEV during the CS period is further improved by using the methods proposed in this paper, and this is meaningful for research and development of PHEV.
文摘The increased concern over global climate change and lack of long-term sustainability of fossil fuels in the projected future has prompted further research into advanced alternative fuel vehicles to reduce vehicle emissions and fuel consumption. One of the primary advanced vehicle research areas involves electrification and hybridization of vehicles. As hybrid-electric vehicle technology has advanced, so has the need for more innovative control schemes for hybrid vehicles, including the development and optimization of hybrid powertrain transmission shift schedules. The hybrid shift schedule works in tandem with a cost function-based torque split algorithm that dynamically determines the optimal torque command for the electric motor and engine. The focus of this work is to develop and analyze the benefits and limitations of two different shift schedules for a position-3 (P3) parallel hybrid-electric vehicle. a traditional two-parameter shift schedule that operates as a function of vehicle accelerator position and vehicle speed (state of charge (SOC) independent shift schedule), and a three-parameter shift schedule that also adapts to fluctuations in the state of charge of the high voltage batteries (SOC dependent shift schedule). The shift schedules were generated using an exhaustive search coupled with a fitness function to evaluate all possible vehicle operating points. The generated shift schedules were then tested in the software-in-the-loop (SIL) environment and the vehicle-in-the-loop (VIL) environment and compared to each other, as well as to the stock 8L45 8-speed transmission shift schedule. The results show that both generated shift schedules improved upon the stock transmission shift schedule used in the hybrid powertrain comparing component efficiency, vehicle efficiency, engine fuel economy, and vehicle fuel economy.
文摘In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, based on simulations with three different driving cycles. The investigated hybrid energy storage topologies are an energy optimized lithium-ion battery (HE) in combination with an Electrical Double-Layer Capacitor (EDLC) system, in combination with a power optimized lithium-ion battery (HP) system or in combination with a Lithium-ion Capacitor (LiCap) system, that act as a Peak Power System. From the simulation results it was observed that hybridization of the HE lithium-ion based energy storage system resulted from the three topologies in an increased overall energy efficiency of the RESS, in an extended all electric range of the PHEV and in a reduced average current through the HE battery. The lowest consumption during the three driving cycles was obtained for the HE-LiCap topology, where fuel savings of respectively 6.0%, 10.3% and 6.8% compared with the battery stand-alone system were achieved. The largest extension of the range was achieved for the HE-HP configuration (17% based on FTP-75 driving cycle). HP batteries however have a large internal resistance in comparison to EDLC and LiCap systems, which resulted in a reduced overall energy efficiency of the hybrid RESS. Additionally, it was observed that the HP and LiCap systems both offer significant benefits for the integration of a peak power system in the drivetrain of a Plug-in Hybrid Electric Vehicle due to their low volume and weight in comparison to that of the EDLC system.
文摘Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the main factors which affect HEV's fuel consumption, emission and performance. Therefore, optimal management of the energy components is a key element for the success of a HEV. An optimal energy management system is developed for HEV based on genetic algorithm. Then, different powertrain system component combinations effects are investigated in various driving cycles. HEV simulation results are compared for default rule-based, fuzzy and GA-fuzzy controllers by using ADVISOR. The results indicate the effectiveness of proposed optimal controller over real world driving cycles. Also, an optimal powertrain configuration to improve fuel consumption and emission efficiency is proposed for each driving condition. Finally, the effects of batteries in initial state of charge and hybridization factor are investigated on HEV performance to evaluate fuel consumption and emissions. Fuel consumption average reduction of about 14% is obtained for optimal configuration data in contrast to default configuration. Also results indicate that proposed controller has reduced emission of about 10% in various traffic conditions.
文摘With proper power scheduling and dynamic pricing,a unidirectional charger can provide benefits and regulation services to the electricity grid,at a level approaching that of bidirectional charging.Power scheduling and schedule flexibility of electric and plug-in hybrid vehicles are addressed.The use of electric vehicles(EVs)as flexibility resources and associated unidirectional vehicle-to-grid benefits are investigated.Power can be scheduled with the EV charger in control of charging or via control by a utility or an aggregator.Charging cost functions suitable for charger-and utility-controlled power scheduling are presented.Ancillary service levels possible with unidirectional vehicle-to-grid are quantified using sample charging scenarios from published data.Impacts of various power schedules and vehicle participation as a flexibility resource on electricity locational prices are evaluated.These include benefits to both owners and load-serving entities.Frequency regulation is considered in the context of unidirectional charging.
基金Department of Technology in Shaanxi Province,China(No.2016GY-126)
文摘There are lots of factors that can influence the wireless charging efficiency in practice, such as misalignment and air-gap difference, which can also change all the charging parameters. To figure out the relationship between those facts and system, this paper presents a serial-parallel compensated(SPC) topology for electric vehicle/plug-in hybrid electric vehicle(EV/PHEV) wireless charger and provides all the parameters changing with corresponding curves. An ANSYS model is built to extract the coupling coefficient of coils. When the system is works at constant output power, the scan frequency process can be applied to wireless power transfer(WPT) and get the resonant frequency. In this way, it could determine the best frequency for system to achieve zero voltage switching status and force the system to hit the maximum transmission efficiency. Then frequency tracking control(FTC) is used to obtain the highest system efficiency. In the paper, the designed system is rated at 500 W with 15 cm air-gap, the overall efficiency is 92%. At the end, the paper also gives the consideration on how to improve the system efficiency.
文摘This paper presents a study undertaken to understand the plug-in vehicle acceptance and probable utilization behaviour in terms of charging habits and utility factor (probability of driving in electrical mode). A survey was designed to be answered via World Wide Web, throughout 3 months and only accessible to Portuguese inhabitants. The survey was composed by biographical and car ownership info, mobility patterns, awareness toward plug-in vehicle technologies, price premium and, finally, potential buyer’s attitudes regarding charging vehicles with electricity from the grid. An explanation of how each vehicle technology works in the case of a regular hybrid (HEV), a plug-in hybrid (PHEV) and a pure electric vehicle (EV) was provided. A total sample of 809 volunteers answered the survey, aged above 18 years old, 50% male and 50% female. The results allowed the estimation of the typical daily driving distance, the Utility Factor curve for plug-in hybrid future users, the charging preferences for future users of pure electric or plug-in hybrid vehicles and the necessary feebates to promote the market penetration of such technologies. Other correlations were also analyzed between driving patterns, type of owned car, price premium and the willingness to buy pure electric and plug-in hybrid vehicles. The main policy implications are that an increase of awareness campaigns is necessary if the government intends to support the plug-in electric vehicle technology widespread and a minimum of 5000 € investment per ton of avoided CO2 will be necessary in a year.
文摘The plug-in hybrid vehicles(PHEV)technology can effectively address the issues of poor dynamics and higher energy consumption commonly found in traditional mining dump trucks.Meanwhile,plug-in hybrid electric trucks can achieve excellent fuel economy through efficient energy management strategies(EMS).Therefore,a series hybrid system is constructed based on a 100-ton mining dump truck in this paper.And inspired by the dynamic programming(DP)algorithm,a predictive equivalent consumption minimization strategy(P-ECMS)based on the DP optimization result is proposed.Based on the optimal control manifold and the SOC reference trajectory obtained by the DP algorithm,the P-ECMS strategy performs real-time stage parameter optimization to obtain the optimal equivalent factor(EF).Finally,applying the equivalent consumption minimization strategy(ECMS)realizes real-time control.The simulation results show that the equivalent fuel consumption of the P-ECMS strategy under the experimentally collected mining cycle conditions is 150.8 L/100 km,which is 10.9%less than that of the common CDCS strategy(169.3 L/100 km),and achieves 99.47%of the fuel saving effect of the DP strategy(150 L/100 km).
基金National Natural Science Foundation of China(Grant No.51775478)Hebei Provincial Natural Science Foundation of China(Grant Nos.E2016203173,E2020203078).
文摘Achieving accurate speed prediction provides the most critical support parameter for high-level energy management of plug-in hybrid electric vehicles.Nowadays,people often drive a vehicle on fixed routes in their daily travels and accurate speed predictions of these routes are possible with random prediction and machine learning,but the prediction accuracy still needs to be improved.The prediction accuracy of traditional prediction algorithms is difficult to further improve after reaching a certain accuracy;problems,such as over fitting,occur in the process of improving prediction accuracy.The combined prediction model proposed in this paper can abandon the transitional dependence on a single prediction.By combining the two prediction algorithms,the fusion of prediction performance is achieved,the limit of the single prediction performance is crossed,and the goal of improving vehicle speed prediction performance is achieved.In this paper,an extraction method suitable for fixed route vehicle speed is designed.The application of Markov and back propagation(BP)neural network in predictions is introduced.Three new combined prediction methods,all named Markov and BP Neural Network(MBNN)combined prediction algorithm,are proposed,which make full use of the advantages of Markov and BP neural network algorithms.Finally,the comparison among the prediction methods has been carried out.The results show that the three MBNN models have improved by about 19%,28%,and 29%compared with the Markov prediction model,which has better performance in the single prediction models.Overall,the MBNN combined prediction models can improve the prediction accuracy by 25.3%on average,which provides important support for the possible optimization of plug-in hybrid electric vehicle energy consumption.
基金supported by the Natural Science Foundation of Guangdong Province under Grant 2020A1515010773the Key-Area Research and Development Program of Guangdong Province under Grant 2019B090912001.
文摘The study of series–parallel plug-in hybrid electric vehicles(PHEVs)has become a research hotspot in new energy vehicles.The global optimal Pareto solutions of energy management strategy(EMS)play a crucial role in the development of PHEVs.This paper presents a multi-objective global optimization algorithm for the EMS of PHEVs.The algorithm combines the Radau Pseudospectral Knotting Method(RPKM)and the Nondominated Sorting Genetic Algorithm(NSGA)-II to optimize both energy conservation and battery lifespan under the suburban driving conditions of the New European Driving Cycle.The driving conditions are divided into stages at evident mode switching points and the optimal objectives are computed using RPKM.The RPKM results serve as the fitness values in iteration through the NSGA-II method.The results of the algorithm applied to a PHEV simulation show a 26.74%–53.87%improvement in both objectives after 20 iterations compared to the solutions obtained using only RPKM.The proposed algorithm is evaluated against the weighting dynamic programming and is found to be close to the global optimality,with the added benefits of faster and more uniform solutions.
文摘Nowadays,utilities aim to find methods for improving the reliability of distribution systems and satisfying the customers by providing the continuity of power supply.Different methodologies exist for utilities to improve the reliability of network.In this paper,demand response(DR)programs and smart charging/discharging of plug-in electric vehicles(PEVs)are investigated for improving the reliability of radial distribution systems adopting particle swarm optimization(PSO)algorithm.Such analysis is accomplished due to the positive effects of both DR and PEVs for dealing with emerging challenges of the world such as fossil fuel reserves reduction,urban air pollution and greenhouse gas emissions.Additionally,the prioritization of DR and PEVs is presented for improving the reliability and analyzing the characteristics of distribution networks.The reliability analysis is performed in terms of loss of load expectation(LOLE)and expected energy not served(EENS)indexes,where the characteristics contain load profile,load peak,voltage profile and energy loss.Numerical simulations are accomplished to assess the effectiveness and practicality of the proposed scheme.
文摘Plug-in electric vehicle(PEV) load modeling is very important in the operation and planning studies of modern power system nowadays. Several parameters and considerations should be taken into account in PEV load modeling, making it a complex problem that should be solved using appropriate techniques. Different techniques have been introduced for PEV load modeling and each of them has individual specifications and features. In this paper, the most popular techniques for PEV load modeling are reviewed and their capabilities are evaluated. Both deterministic and probabilistic methods are investigated and some practical and theoretical hints are presented. Moreover, the characteristics of all techniques are compared with each other and suitable methods for unique applications are proposed. Finally, some potential research areas are presented for future works.
基金This work was supported in part by the National Natural Science Foundation of China(No.51477067)in part by the China-UK Joint Project of the National Natural Science Foundation of China(No.51361130150)in part by the Fundamental Research Funds for the Central Universities(No.2014QN219).
文摘In this paper,the microgrid economic scheduling mathematical model considering the integration of plug-in hybrid electric vehicles(PHEVs)is presented and the influence of different charging and discharging modes on microgrid economic operation is analyzed.The generic algorithm is used to find an economically optimal solution for the microgrid and PHEV owners.The scheduling of PHEVs and the microgrid are optimized to reduce daily electricity cost and the potential benefits of controlled charging/discharging are explored systematically.Constraints caused by vehicle utilization as well as technical limitations of distributed generation and energy storage system are taken into account.The proposed economic scheduling is evaluated through a simulation by using a typical grid-connected microgrid model.
基金Proposal Number:EEQ-2016-000263,Financially supported by Department of Science and Technology(DST),Science and Engineering Research Board(SERB),Govt.of India,New Delhi,India.
文摘Purpose:The increase in plug-in electric vehicles(PEVs)is likely to see a noteworthy impact on the distribution system due to high electric power consumption during charging and uncertainty in charging behavior.To address this problem,the present work mainly focuses on optimal integration of distributed generators(DG)into radial distribution systems in the presence of PEV loads with their charging behavior under daily load pattern including load models by considering the daily(24 h)power loss and voltage improvement of the system as objectives for better system performance.Design/methodology/approach:To achieve the desired outcomes,an efficient weighted factor multi-objective function is modeled.Particle Swarm Optimization(PSO)and Butterfly Optimization(BO)algorithms are selected and implemented to minimize the objectives of the system.A repetitive backward-forward sweep-based load flow has been introduced to calculate the daily power loss and bus voltages of the radial distribution system.The simulations are carried out using MATLAB software.Findings:The simulation outcomes reveal that the proposed approach definitely improved the system performance in all aspects.Among PSO and BO,BO is comparatively successful in achieving the desired objectives.Originality/value:The main contribution of this paper is the formulation of the multi-objective function that can address daily active power loss and voltage deviation under 24-h load pattern including grouping of residential,industrial and commercial loads.Introduction of repetitive backward-forward sweep-based load flow and the modeling of PEV load with two different charging scenarios.
文摘This study is laser focused on the simulation of fuel consumption and fuel economy label parameters of plug-in hybrid electric vehicles.While fuel economy is a key factor in the design of plug-in hybrid electric vehicles,a fuel economy label can educate customers about the economic advantage of purchasing a particular car.The fuel economy label of a PHEV consists of parameters like driving range,electrical energy consumption,fuel economy for city,highway,and combined use,battery recharge time,and fuel consumption rates.The study used an inverse function model of an artificial neural network to simulate and calculate the parameters of the fuel economy labels of PHEVs.Firstly,the selected parameters of the fuel economy label of plug-in hybrid electric vehicles were used to develop a single output model.The output variable of the single output model was then merged with dummy functions to form input variables for the inverse function model.The output variables simulated were engine size in litres;estimated driving range when the battery is fully charged in km,battery recharged time in hours,city fuel consumption(L/100 km),highway fuel consumption(L/100 km),combined fuel consumption(L/100 km),estimated driving range when the tank is full,carbon dioxide(CO_(2))emission in grams/km,electric motor power in kW,number of cylinders,and electrical charges consumed in kWh/100 km.Different cases of input variables were considered for the inverse function model.The accuracy of the model was 29.1 times greater than that of the conventional inverse artificial neural network model.
基金The authors would also like to thank UK EPSRC under grant EP/L001063/1 and China NSFC under grants 51361130153 and 61273040.
文摘Economic and environmental load dispatch aims to determine the amount of electricity generated from power plants to meet load demand while minimizing fossil fuel costs and air pollution emissions subject to operational and licensing requirements.These two scheduling problems are commonly formulated with non-smooth cost functions respectively considering various effects and constraints,such as the valve point effect,power balance and ramprate limits.The expected increase in plug-in electric vehicles is likely to see a significant impact on the power system due to high charging power consumption and significant uncertainty in charging times.In this paper,multiple electric vehicle charging profiles are comparatively integrated into a 24-hour load demand in an economic and environment dispatch model.Self-learning teaching-learning based optimization(TLBO)is employed to solve the non-convex non-linear dispatch problems.Numerical results onwell-known benchmark functions,as well as test systems with different scales of generation units show the significance of the new scheduling method.