A Study on the Static Characteristics of Typical Composite High Speed On-Off Valves

Natural properties of high speed on-off valves can be described through their on-off behavior and spool movement (static and oscillating) characteristics. High speed on-off valves can be combined with actuators in systems into four typical types of composite valves whose static characteristics are related not only to the structures of the single valves and the composite ones, but also to the PWM control modes. It is proved that the composite valves have similar features as those of servo valves. The nonlinear specific properties of single valves composited can be completely compensated by the suitable PWM control modes.

Structure optimization and flow field simulation of plate type high speed on-off valve

There is a relatively complex flow state inside the high speed on-off valve,which often produces low pressure area and oil reflux in the high-speed opening and closing process of the spool,causing cavitation and vortex and other phenomena.These phenomena will affect the stability of the internal flow field of the plate valve and the flow characteristics of the high speed on-off valve.Aiming at the problems of small flow rate and instability of internal flow field,a new spool structure was designed.The flow field models of two-hole and three-hole plate spools with different openings were established,and software ANSYS Workbench was chosen to mesh the model.The standard k−εturbulence model was selected for numerical simulation using FLUENT software.The pressure distribution and velocity distribution under the same pressure and different opening degree were obtained.The structure and parameters of the optimization model were also obtained.The stability analysis of flow field under different pressure was carried out.The results demonstrate that the three-hole spool has a similar flow field change with the two-hole spool,but it does not create a low pressure zone,and the three-hole spool can work stably at 2 MPa or less.This method improves the appearance of low pressure area and oil backflow in the process of high speed opening and closing of spool.The stability of flow field and the flow rate of high speed switch valve are improved.Finally,the products designed in this paper are compared with existing hydraulic valve products.The results show that the three-hole plate type high speed on-off valve designed in this paper maintains the stability of the internal flow field under the condition of 200 Hz and large opening degree,and realizes the increase of flow rate.

TEST METHOD OF HIGH-SPEED ON-OFF VALVE DYNAMIC CHARACTERISTICS

According to the valve port features of high speed on-off valve and its actions, the valve port can be simplified into an a-type half bridge construction. A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed. Having analyzed the factors related to the dynamic characteristics of an a-type half bridge, a rule for designing the outlet chamber＇s volume is worked out. According to the rule, a test stand is built to test the self-developed high-speed on-off valve. From the test results, it can be seen that with the outlet chamber＇s volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little. The test results conform to the simulation results, which nroves the correctness of the method.

Research on the Characteristics of Pneumatic PCM Control Valve

Based on the flow characteristic equation of air in adiabatic process, the characteristics of modulated on-off valve in a pneumatic pressure control system is analyzed theoretically. The relationship between the parameters and performance of the system is obtained, and it is also observed that the control error is proportional to the on-off period of the valve.

High-effciency aircraft antiskid brake control algorithm via runway condition identification based on an on-off valve array

The aircraft antiskid braking system is an important hydraulic system for preventing tire bursts and ensuring safe take-off and landing. The brake system adjusts the force applied on the brake discs by controlling the brake pressure. Traditional aircraft antiskid braking systems achieve antiskid performance by controlling the braking pressure with an electrohydraulic servo valve.Because the pilot stage of an electrohydraulic servo valve is easily blocked by carbonized hydraulic oil, the servo valve would become a dangerous weak point for aircraft safety. This paper proposes a new approach that uses an on-off valve array to replace the servo valve for pressure control. Based on this new pressure control component, an efficient antiskid control algorithm that can utilize this discontinuous feature is proposed. Furthermore, the algorithm has the ability to identify the runway circumstances. To overcome the discontinuity in the process of using an on-off valve array, the Filippov framework is introduced. The conditions of convergence of the system are also discussed.The results of the digital simulations and the hardware-in-the-loop(HIL) braking experiments are used to verify the efficiency and stability of the proposed control algorithm. The method also proves that the on-off valve array can replace the servo valve perfectly as a new type of antiskid braking pressure control component.

气动调节阀和开关阀总用气量的统计方法

本文在查阅各种规程规范和文献的基础上,对气动调节阀和开关阀总的用气量的不同计算方法和公式进行分析比较,总结出实际可操作的一种方法供今后的工程中应用,对指导设计人员的工作有实际意义。