A Kind of PWM Pneumatic Servo Control System——Modulation Methods and Dynamic Responses

Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.

LQG Controller Design Applied to a Pneumatic Stewart-Gough Platform

This paper is concerned with the practical application control of a pneumatically actuated Stewart-Gough platform with 6-degrees of freedom （6-DOF）. The control approach for motion control of the platform is presented using a modern control technique, namely, linear quadratic Gaussinn （LQG） with reference tracking. The LQG controller is the combination of a Kalman filter, i.e., a linear-quadratic estimator （LQE） with a linear-quadratic regulator （LQR）. The robustness of the control scheme is accessed under various load conditions, and the experimental results are shown.

Design and control of integrated pneumatic dexterous robot finger

Based on flexible pneumatic actuator(FPA),bending joint and side-sway joint,a new kind of pneumatic dexterous robot finger was developed.The finger is equipped with one five-component force sensor and four contactless magnetic rotary encoders.Mechanical parts and FPAs are integrated,which reduces the overall size of the finger.Driven by FPA directly,the joint output torque is more accurate and the friction and vibration can be effectively reduced.An improved adaptive genetic algorithm(IAGA) was adopted to solve the inverse kinematics problem of the redundant finger.The statics of the finger was analyzed and the relation between fingertip force and joint torque was built.Finally,the finger force/position control principle was introduced.Tracking experiments of fingertip force/position were carried out.The experimental results show that the fingertip position tracking error is within ±1 mm and the fingertip force tracking error is within ±0.4 N.It is also concluded from the theoretical and experimental results that the finger can be controlled and it has a good application prospect.

Development and control of flexible pneumatic wall-climbing robot

A new kind of flexible pneumatic wall-climbing robot,named WALKMAN-I,was proposed. WALKMAN-I is basically composed of a flexible pneumatic actuator (FPA),a flexible pneumatic spherical joint and six suction cups. It has many characteristics of low-cost,lightweight,simple structure and good flexibility. Its operating principle was introduced. Then three basic locomotion modes,which are linear motion,curvilinear motion and crossing the orthogonal planes,were presented. The safety conditions of WALKMAN-I were discussed and built. Finally,the control system was designed and experiments were carried out. Experimental results show that WALKMAN-I is able to climb on the vertical wall surface along a straight line or a curved path,and has the ability of crossing orthogonal planes and obstacles. The maximum rotation angle reaches 90°,the maximum velocity reaches 5 mm/s,and the rotation angle and the moving velocity of WALKMAN-I can be easily controlled.

Development of a Wearable Upper Limb Rehabilitation Robot Based on Reinforced Soft Pneumatic Actuators

Dyskinesia of the upper limbs caused by stroke,sports injury,or trafc accidents limits the ability to perform the activities of daily living.Besides the necessary medical treatment,correct and scientifc rehabilitation training for the injured joint is an important auxiliary means during the treatment of the efected upper limb.Conventional upperlimb rehabilitation robots have some disadvantages,such as a complex structure,poor compliance,high cost,and poor portability.In this study,a novel soft wearable upper limb rehabilitation robot(SWULRR)with reinforced soft pneumatic actuators(RSPAs)that can withstand high pressure and featuring excellent loading characteristics was developed.Driven by RSPAs,this portable SWULRR can perform rehabilitation training of the wrist and elbow joints.In this study,the kinematics of an SWULRR were analyzed,and the force and motion characteristics of RSPA were studied experimentally.The results provide a reference for the development and application of wearable upper limb rehabilitation robots.An experimental study on the rotation angle of the wrist and the pressure of the RSPA was conducted to test the efect of the rehabilitation training and verify the rationality of the theoretical model.The process of wrist rehabilitation training was tested and evaluated,indicating that SWULRR with RSPAs will enhance the fexibility,comfort,and safety of rehabilitation training.This work is expected to promote the development of wearable upper-limb rehabilitation robots based on modular reinforced soft pneumatic actuators.

Dynamic Analysis and Decoupling Control of Octo-pneumatic Actuator Vibration Isolation Platform

Control of a six-DOF vibration isolation platform is generally difficult which is due to the strong coupling among its input and output channels. The dynamic behavior and decoupling approach of a six-DOF vibration isolation platform with eight pneumatic actuators are investigated. Owing to the symmetric configuration design of the platform, the coupling among different channels is greatly weakened. When the payload＇s principal axes of inertia parallel to the platform＇s axes of symmetry and the payload＇s center of mass is at the extension line of the platform＇s central axis, the motion can be decomposed into two independent single-input single-output channels and two independent two-input two-output subsystems. The second-order subsystems are decoupled further with the simultaneous matrix diagonalization. Thus a decoupling control strategy is developed. Effectiveness of the decoupling approach is verified through experiments of the platform, and the experimental results show that vibrations of the platform are attenuated obviously owing to the active control.

Analysis of Power Matching on Energy Savings of a Pneumatic Rotary Actuator Servo-Control System

When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic system,and the energy-saving effect is verified by experiments.First,the experimental platform of a pneumatic rotary actuator servo-control system is built,and the mechanism of the valve-controlled cylinder system is analyzed.Then,the output power characteristics and load characteristics of the system are derived,and their characteristic curves are drawn.The employed air compressor is considered as a constant-pressure source of a quantitative pump,and the power characteristic of the system is matched.The power source characteristic curve should envelope the output characteristic curve and load characteristic curve.The minimum gas supply pressure obtained by power matching represents the optimal gas supply pressure.The comparative experiments under two different gas supply pressure conditions show that the system under the optimal gas supply pressure can greatly reduce energy losses.

Pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer

This paper presents the construction of a pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer. The one-wheel car model can be approximately described as a nonlinear two degrees of freedom system subject to excitation from a road profile. The active control is composed of fuzzy and disturbance controls, and the active control force is constructed by actuating a pneumatic actuator. A phase lead-lag compensator is inserted to counter the performance degradation due to the delay of the pneumatic actuator. The experimental result indicates that the proposed active suspension improves much the vibration suppression of the car model.

STUDY ON THE CONTROL OF SINGLE PNEUMATIC MUSCLE ACTUATOR

The control of single pneumatic muscle actuator is studied, as one basic partof research on the parallel-robot arthrosis actuated by pneumatic muscle actuators. Experimentsshow that a self-modified fuzzy-PID controller is obviously effective for its position servo and asimple PID controller is good for its force track.

Study on Control of Pneumatic Selecting and Shifting Actuators Using Rapid Control Prototyping

A gearbox in-the-loop control platform using dSPACE real-time system is designed for the study on the control technology of pneumatic selecting and shifting actuators based on rapid control prototyping.The operational principle of such actuators was analyzed using dSPACE hardware and software,resulting in a better knowledge of the logical relationship among solenoid valves,gear positions of cylinders and system input/output.Based on these,a control model was developed under the Matlab/Simulink environment and rapidly improved to meet requirements through experiments.Relevant tests have shown that analysis efficiency on selecting and shifting actuators could be raised and development of control strategy facilitated.

A Survey on Pneumatic Muscle Actuators Modeling

The aim of this article is to provide a survey on the most popular modeling approaches for PMAs （pneumatic muscle actuators）. PMAs are highly non-linear pneumatic actuators where their elongation is proportional to the interval pressure. During the last decade, there has been an increase in the industrial and scientific utilization of PMAs, due to their advantages such as high strength and small weight, while various types of PMAs with different technical characteristics have appeared in the literature. This article will： （a） analyse the PMA＇s operation from a mathematical modeling perspective; （b） present their merits and drawbacks of the most common PMAs; and （c） establish the fundamental basis for developing industrial applications and conducting research in this field.

Soft pneumatic actuators by digital light processing combined with injection-assisted post-curing

The soft robotics display huge advantages over their rigid counterparts when interacting with living organisms and fragile objects.As one of the most efficient actuators toward soft robotics,the soft pneumatic actuator(SPA)can produce large,complex responses with utilizing pressure as the only input source.In this work,a new approach that combines digital light processing(DLP)and injection-assisted post-curing is proposed to create SPAs that can realize different functionalities.To enable this,we develop a new class of photo-cross linked elastomers with tunable mechanical properties,good stretchability,and rapid curing speed.By carefully designing the geometry of the cavities embedded in the actuators,the resulting actuators can realize contracting,expanding,flapping,and twisting motions.In addition,we successfully fabricate a soft self-sensing bending actuator by injecting conductive liquids into the three-dimensional(3D)printed actuator,demonstrating that the present method has the potential to be used to manufacture intelligent soft robotic systems.

Position Control of Single Pneumatic Muscle Actuator

The PID, fuzzy, self-organized fuzzy and self-organized fuzzy-PID controllers are adopted in the position control of single pneumatic muscle actuator. Experiments show that the self-organized fuzzy-PID is obviously effective for the position control of single pneumatic muscle actuator, which can realize precision within 0.3 mm and withstand 18?N variable load plus about 36?N fixed load. It is relatively precise and robust.

Intelligent PID Control of Pneumatic Rotary Actuator Angle Servo-System

In order to solve the problems that make the orientation of pneumatic rotary actuator inaccurate, a newly intelligent PID control algorithm is proposed. Pneumatic rotary actuator angle servo-system uses electropneumatic proportional valve as control device, which changes the pressure of cavity and then pushes the actuator to revolve to the expected position. Using intelligent PID control algorithm, several special methods were put forward to overcome the connatural shortcomings of pneumatic system and make the rotary actuator track the expected value timely and accurately. Experimental results have shown that by using this intelligent algorithm, the performance index of system was improved greatly.

Simulation and Experimental Study of Dynamic Characteristics of a Pneumatic Actuator in Air Splicer

Splicing process parameters determined by dynamic characteristic of pneumatic actuator in air splicer have a significant influence on the performance of spliced yarn. Both gas thermodynamic and pneumatic actuator dynamic models, which were solved by the Runge-Kutta algorithm, were established to analyze the relationship among structural parameters of a pneumatic actuator and splicing process parameters such as splicing duration and gas consumption. Additionally,a visualization test bench to observe the dynamics of the pneumatic actuator and a mass flow measurement system to track splicing duration and gas consumption were designed. Comparisons between experimental data and simulation results show that the mathematical model accurately accounts for the dynamic characteristics of the pneumatic actuator,and consequently predicts splicing process parameters, which provides a theoretical foundation for the design optimization of air splicer.

Pneumatic Rotary Actuator Angle Control System

Based on the adaptive control method, a kind of parameter adjustor was used to control pneumatic rotary actuator to track the expected output. The system uses electropneumatic proportional valve as control device, which adjusts the gas flow of actuator 's two cavities, then changes the pressure of cavity and pushes the piston of actuator to move, so the rotary actuator 's axis can be made to revolve to the required angle at last. According to the characteristic of pneumatic system, the control system was described with a fourth-order mathematic model. The control rule is deduced by model reference adaptive control method. By the result of experiment, it was proved that by using the adaptive control method, the output of rotary actuator could track the expected value timely and accurately.

Analysis of characteristics of a pneumatic miniature robotic system

This paper described the structure of a flexible miniature robotic system which can move in human cavities, and then analyzed the characteristics of the robotic system in detail. The mobile mechanism of the miniature robotic system is soft; it makes inchworm-like movement driven by a 3-DOF pneumatic rubber actuator and holds its positions by air chambers. The driving characteristic models in axial and bending directions of the actuator were set up and the kinemics equations of the robotic system were set up. Experiments had been done through an electro-pressure control system, by which the pneumatic robotic system can be controlled with high accuracy. It is suitable for moving in human cavities for medical inspection.

Angle Control of a Pneumatically Driven Musculoskeletal Model Based on Coordination of Agonist-Antagonist Muscle

In recent years, researchers have been actively pursuing research into developing robots that can be useful in many fields of industry （e.g., service, medical, and aging care）. Such robots must be safe and flexible so that they can coexist with people. Pneumatic actuators are useful for achieving this goal because they are lightweight units with natural compliance. Our research focuses on joint angle control for a pneumatically driven musculoskeletal model. In such a model, we use a one-degree-of-freedom joint model and a five-fingered robot hand as test beds. These models are driven by low pressure-driven pneumatic actuators, and mimic the mechanism of the human hand and musculoskeletal structure, which has an antagonistic muscle pair for each joint. We demonstrated a biologically inspired control method using the parameters antagonistic muscle ratio and antagonistic muscle activity. The concept of the method is based on coordination of an antagonistic muscle pair using these parameters. We have investigated the validity of the proposed method both theoretically and experimentally, developed a feedback control system, and conducted joint angle control by implementing the test beds.

Biomimetic soft robotic wrist with 3-DOF motion and stiffness tunability based on ring-reinforced pneumatic actuators and a particle jamming joint

The human wrist, a complex articulation of skeletal muscles and two-carpal rows, substantially contributes to improvements in maneuverability by agilely performing three-degree-of-freedom(3-DOF) orienting tasks and regulating stiffness according to variations in interaction forces. However, few soft robotic wrists simultaneously demonstrate dexterous 3-DOF motion and variable stiffness;in addition, they do not fully consider a soft-rigid hybrid structure of integrated muscles and two carpal rows.In this study, we developed a soft-rigid hybrid structure to design a biomimetic soft robotic wrist(BSRW) that is capable of rotating in the x and y directions, twisting around the z-axis, and possessing stiffness-tunable capacity. To actuate the BSRW, a lightweight soft-ring-reinforced bellows-type pneumatic actuator(SRBPA) with large axial, linear deformation(η_(lcmax)=70.6%,η_(lemax)=54.3%) and small radial expansion(η_(demax)=3.7%) is designed to mimic the motion of skeletal muscles. To represent the function of two-carpal rows, a compact particle-jamming joint(PJJ) that combines particles with a membrane-covered ballsocket mechanism is developed to achieve various 3-DOF motions and high axial load-carrying capacity(>60 N). By varying the jamming pressure, the stiffness of the PJJ can be adjusted. Finally, a centrally positioned PJJ and six independently actuated SRBPAs, which are in an inclined and antagonistic arrangement, are sandwiched between two rigid plates to form a flexible,stable, and compact BSRW. Such a structure enables the BSRW to have a dexterous 3-DOF motion, high load-carrying ability,and stiffness tunability. Experimental analysis verify 3-DOF motion of BSRW, producing force of 29.6 N and 36 N and torque of2.2 Nm in corresponding rotations. Moreover, the range of rotational angle and stiffness-tuning properties of BSRW are studied by applying jamming pressure to the PJJ. Finally, a system combining a BSRW and a soft enclosing gripper is proposed to demonstrate outstanding manipulation capability in potential applications.

Investigation of mechanical and electrical characteristics of selfsensing pneumatic torsional actuators

Soft pneumatic actuators are one of the most promising actuation for soft robots,and great achievements have been obtained.But it remains challenging to endow sensing capabilities to pneumatic actuators,especially for the sensing ability originating directly from the actuator architecture.Herein,a self-sensing pneumatic torsional actuator(SPTA)is designed based on the electromagnetic induction effect and magnetically responsive materials.The SPTA can generate feedback voltage and current with the deformation,in which the sensing function comes from its inherent structure.To investigate the mechanical and electrical characteristics,an experimental platform and a finite element model are established,respectively.We find that the torsion angle and output torque increase in nonlinear with the actuating pressure.The maximum torsion angle is 66.35°,which is 84.34%of that for the actuator fabricated by pure rubber.The maximum output torque(24.9 N mm)improves by 23.19%compared with the actuator made by pure rubber.As regards the electrical characteristics,the maximum feedback voltage and current are 2.90μV and 29.50 nA when the SPTA is actuated by a pressure of−40 kPa.We also demonstrate that the relationship between the torsion angle and the magnetic flux change is approximately linear.Finally,the number of turns of wires,magnetic powders contents,and magnetic direction on the feedback voltage and current are studied.Results show that the feedback voltage and current can be enhanced by increasing the number of turns and magnetic powders contents.We envision that the SPTA would be promising for soft robots to realize their accuracy control and intelligentization.