The present work is devoted to developing an efficient method for the analysis and design of hybrid contra-rotating shaft pod(HCRSP)propulsors.The geometry of contra-rotating propulsor(CRP)was then analyzed,and a stea...The present work is devoted to developing an efficient method for the analysis and design of hybrid contra-rotating shaft pod(HCRSP)propulsors.The geometry of contra-rotating propulsor(CRP)was then analyzed,and a steady integral panel method that treats the forward and aft propellers as a whole part is presented.During the study,the control equation of the steady integral panel method for CRP is derived in detail.From the experience of developing an integral panel method for CRP,the characteristics of panel singularity strength in HCRSP propulsor was analyzed.Based on this analysis,an integral panel method for HCRSP propulsor is developed and the wake model discussed.Then,the method is applied in the performance analysis of HCRSP propulsor.Comparison between experimental data and numerical results shows that the steady integral panel method has good accuracy in terms of open water performance.Regarding the latter,the error source in the steady integral panel method is discussed.展开更多
The Computational Fluid Dynamics (CFD) approach is adopted to study the steady and unsteady performances of the podded propulsor by the Fluent software package. While the interactions of the propeller blades with th...The Computational Fluid Dynamics (CFD) approach is adopted to study the steady and unsteady performances of the podded propulsor by the Fluent software package. While the interactions of the propeller blades with the pod and strut are time-dependent by nature, the mixing plane model is employed firstly to predict the steady performance, where the interactions are time-averaged. Numerical experiments are carried out with systematically varied mesh sizes to investigate the dependence of the predicted force values on the mesh sizes. Furthermore, the sliding mesh model is employed to simulate the unsteady interactions between the blades, pod and strut. Based on the numerical results, the characteristics of unsteady hydrodynamic forces are discussed, and the applicability of the mixing plane model is investigated for puller-type podded propulsor.展开更多
The unsteady performance of drag and double reverse propeller podded propulsors in open water was numerically simulated using a computational fluid dynamics (CFD) method. A moving mesh method was used to more realis...The unsteady performance of drag and double reverse propeller podded propulsors in open water was numerically simulated using a computational fluid dynamics (CFD) method. A moving mesh method was used to more realistically simulate propulsor working conditions, and the thrust, torque, and lateral force coefficients of both propulsors were compared and analyzed. Forces acting on different parts of the propulsors along with the flow field distribution of steady and unsteady results at different advance coefficients were compared. Moreover, the change of the lateral force and the difference between the abovementioned two methods were mainly analyzed. It was shown that the thrust and torque results of both methods were similar, with the lateral force results having the highest deviation展开更多
Experimental tests were conducted to evaluate the hydrodynamic performance of an L-type podded propulsor in straight-ahead motion and off-design conditions using an open-water measuring instrument developed by the aut...Experimental tests were conducted to evaluate the hydrodynamic performance of an L-type podded propulsor in straight-ahead motion and off-design conditions using an open-water measuring instrument developed by the authors for podded propulsors, a ship model towing tank, and under water particle image velocimetry (PIV) measurement systems. Under the three types of conditions, the main parameters of an L-type podded propulsor were measured, including the propeller thrust and torque, as well as the thrust, side force, and moment of the whole pod unit.In addition, the flow field on the section between the propeller and the strut was analyzed. Experimental results demonstrate that the dynamic azimuthing rate and direction and the turning direction affect the forces on the propeller and the whole pod unit. Forces are asymmetrically distributed between the left and right azimuthing directions because of the effect of propeller rotation. The findings of this study provide a foundation for further research on L-type podded propulsors.展开更多
Based on the model test of podded propulsor in straight forward motion, the paper presents the results of the effects of geometric parameters on the propulsive characteristics of podded propulsors in viscous flow. Thr...Based on the model test of podded propulsor in straight forward motion, the paper presents the results of the effects of geometric parameters on the propulsive characteristics of podded propulsors in viscous flow. Three main geometrical parameters, i.e. pod diameter, strut distance from the propeller plane, and the maximum thickness of strut are studied with systematically varied geometry while the parameters of propeller blades are fixed. The RANS approach is adopted to study the steady perfomaance using the Huent software package. While the interactions of the propeller blades with the pod and strut are time-dependent by nature, the mixing plane model is employed to predict the steady perfomlance. In considera- tion of the complexity, the research does not deal with the effects of the combination of such three main parameters.展开更多
During ice-breaking navigation, a massive amount of crushed ice blocks with different sizes is accumulated under the hull of an ice-going ship. This ice slides into the flow field in the forward side of the podded pro...During ice-breaking navigation, a massive amount of crushed ice blocks with different sizes is accumulated under the hull of an ice-going ship. This ice slides into the flow field in the forward side of the podded propulsor, affecting the surrounding flow field and aggravating the non-uniformity of the propeller wake. A pulsating load is formed on the propeller, which affects the hydrodynamic performance of the podded propulsor. To study the changes in the propeller hydrodynamic performance during the ice podded propulsor interaction, the overlapping grid technique is used to simulate the unsteady hydrodynamic performance of the podded propulsor at different propeller rotation angles and different ice block sizes. Hence, the hydrodynamic blade behavior during propeller rotation under the interaction between the ice and podded propulsor is discussed. The unsteady propeller loads and surrounding flow fields obtained for ice blocks with different sizes interacting with the podded propulsor are analyzed in detail. The variation in the hydrodynamic performance during the circular motion of a propeller and the influence of ice size variation on the propeller thrust and torque are determined. The calculation results have certain reference significance for experiment-based research, theoretical calculations and numerical simulation concerning ice podded propulsor interaction.展开更多
A mathematical model of podded propulsors was established in order to investigate the influence of fins. The hydrodynamic performance of podded propulsors with and without fins was calculated, with interactions betwee...A mathematical model of podded propulsors was established in order to investigate the influence of fins. The hydrodynamic performance of podded propulsors with and without fins was calculated, with interactions between propellers and pods and fins derived by iterative calculation. The differential equation based on velocity potential was adopted and hyperboloidal panels were used to avoid gaps between surface panels. The Newton-Raphson iterative procedure was used on the trailing edge to meet the pressure Kutta condition. The velocity distribution was calculated with the Yanagizawa method to eliminate the singularity caused by use of the numerical differential. Comparisons of the performance of podded propulsors with different fins showed that the thrust of propeller in a podded propulsor with fins is greater. The resistance of the pod is also reduced because of the thrust of the fin. The hydrodynamic performance of a podded propulsor with two fins is found to be best, the performance of a podded propulsor with one fin is not as good as two fins, and the performance of the common type is the worst.展开更多
基金The present work is supported by the National Natural Science Foundation of China(Grant no.51479207).
文摘The present work is devoted to developing an efficient method for the analysis and design of hybrid contra-rotating shaft pod(HCRSP)propulsors.The geometry of contra-rotating propulsor(CRP)was then analyzed,and a steady integral panel method that treats the forward and aft propellers as a whole part is presented.During the study,the control equation of the steady integral panel method for CRP is derived in detail.From the experience of developing an integral panel method for CRP,the characteristics of panel singularity strength in HCRSP propulsor was analyzed.Based on this analysis,an integral panel method for HCRSP propulsor is developed and the wake model discussed.Then,the method is applied in the performance analysis of HCRSP propulsor.Comparison between experimental data and numerical results shows that the steady integral panel method has good accuracy in terms of open water performance.Regarding the latter,the error source in the steady integral panel method is discussed.
基金supported by the"Knowledge-based Ship Design Hyper-Integrated Platform(KSHIP)"a key project of the Ministry of Education and the Ministry of Finance of China
文摘The Computational Fluid Dynamics (CFD) approach is adopted to study the steady and unsteady performances of the podded propulsor by the Fluent software package. While the interactions of the propeller blades with the pod and strut are time-dependent by nature, the mixing plane model is employed firstly to predict the steady performance, where the interactions are time-averaged. Numerical experiments are carried out with systematically varied mesh sizes to investigate the dependence of the predicted force values on the mesh sizes. Furthermore, the sliding mesh model is employed to simulate the unsteady interactions between the blades, pod and strut. Based on the numerical results, the characteristics of unsteady hydrodynamic forces are discussed, and the applicability of the mixing plane model is investigated for puller-type podded propulsor.
基金Supported by National Natural Science Foundation of China (41176074, 51209048,51379043,51409063) High tech ship research project of Ministry of industry and technology (G014613002) The support plan for youth backbone teachers of Harbin Engineering University (HEUCFQ1408)
文摘The unsteady performance of drag and double reverse propeller podded propulsors in open water was numerically simulated using a computational fluid dynamics (CFD) method. A moving mesh method was used to more realistically simulate propulsor working conditions, and the thrust, torque, and lateral force coefficients of both propulsors were compared and analyzed. Forces acting on different parts of the propulsors along with the flow field distribution of steady and unsteady results at different advance coefficients were compared. Moreover, the change of the lateral force and the difference between the abovementioned two methods were mainly analyzed. It was shown that the thrust and torque results of both methods were similar, with the lateral force results having the highest deviation
基金Foundation item: Supported by the National Natural Science Foundation of China (Grant Nos. 41176074, 51379043 and 51409063)Acknowledgement This project was supported by the National Natural Science Foundation of China (Grant Nos. 41176074,51379043 and 51409063) and was conducted in response to the great support received from a basic research project entitled "Multihull Ship Technology Key Laboratory of Fundamental Science for National Defence", which was conducted at Harbin Engineering University. The authors would like to extend their sincere gratitude to their colleagues in the towing tank laboratory.
文摘Experimental tests were conducted to evaluate the hydrodynamic performance of an L-type podded propulsor in straight-ahead motion and off-design conditions using an open-water measuring instrument developed by the authors for podded propulsors, a ship model towing tank, and under water particle image velocimetry (PIV) measurement systems. Under the three types of conditions, the main parameters of an L-type podded propulsor were measured, including the propeller thrust and torque, as well as the thrust, side force, and moment of the whole pod unit.In addition, the flow field on the section between the propeller and the strut was analyzed. Experimental results demonstrate that the dynamic azimuthing rate and direction and the turning direction affect the forces on the propeller and the whole pod unit. Forces are asymmetrically distributed between the left and right azimuthing directions because of the effect of propeller rotation. The findings of this study provide a foundation for further research on L-type podded propulsors.
基金supported by the Fundamental Research Funds for the Central Universities (Grant No.HEUCFT1001)the"Knowledge-based Ship Design Hyper-Integrated Plat form(KSHIP)",a Key Project of the Ministry of Education and the Ministry of Finance of China
文摘Based on the model test of podded propulsor in straight forward motion, the paper presents the results of the effects of geometric parameters on the propulsive characteristics of podded propulsors in viscous flow. Three main geometrical parameters, i.e. pod diameter, strut distance from the propeller plane, and the maximum thickness of strut are studied with systematically varied geometry while the parameters of propeller blades are fixed. The RANS approach is adopted to study the steady perfomaance using the Huent software package. While the interactions of the propeller blades with the pod and strut are time-dependent by nature, the mixing plane model is employed to predict the steady perfomlance. In considera- tion of the complexity, the research does not deal with the effects of the combination of such three main parameters.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51679052,51639004 and51809055)the Defense Industrial Technology Development Program(Grant No.JCKY2016604B001)the Natural Science Foundation of Heilongjiang Province of China(Grant No.E2018026)
文摘During ice-breaking navigation, a massive amount of crushed ice blocks with different sizes is accumulated under the hull of an ice-going ship. This ice slides into the flow field in the forward side of the podded propulsor, affecting the surrounding flow field and aggravating the non-uniformity of the propeller wake. A pulsating load is formed on the propeller, which affects the hydrodynamic performance of the podded propulsor. To study the changes in the propeller hydrodynamic performance during the ice podded propulsor interaction, the overlapping grid technique is used to simulate the unsteady hydrodynamic performance of the podded propulsor at different propeller rotation angles and different ice block sizes. Hence, the hydrodynamic blade behavior during propeller rotation under the interaction between the ice and podded propulsor is discussed. The unsteady propeller loads and surrounding flow fields obtained for ice blocks with different sizes interacting with the podded propulsor are analyzed in detail. The variation in the hydrodynamic performance during the circular motion of a propeller and the influence of ice size variation on the propeller thrust and torque are determined. The calculation results have certain reference significance for experiment-based research, theoretical calculations and numerical simulation concerning ice podded propulsor interaction.
基金Supported by the National Natural Science Foundation of China under Grant No.10702016
文摘A mathematical model of podded propulsors was established in order to investigate the influence of fins. The hydrodynamic performance of podded propulsors with and without fins was calculated, with interactions between propellers and pods and fins derived by iterative calculation. The differential equation based on velocity potential was adopted and hyperboloidal panels were used to avoid gaps between surface panels. The Newton-Raphson iterative procedure was used on the trailing edge to meet the pressure Kutta condition. The velocity distribution was calculated with the Yanagizawa method to eliminate the singularity caused by use of the numerical differential. Comparisons of the performance of podded propulsors with different fins showed that the thrust of propeller in a podded propulsor with fins is greater. The resistance of the pod is also reduced because of the thrust of the fin. The hydrodynamic performance of a podded propulsor with two fins is found to be best, the performance of a podded propulsor with one fin is not as good as two fins, and the performance of the common type is the worst.