Topology Optimization of Metamaterial Microstructures for Negative Poisson’s Ratio under Large Deformation Using a Gradient-Free Method

Negative Poisson’s ratio(NPR)metamaterials are attractive for their unique mechanical behaviors and potential applications in deformation control and energy absorption.However,when subjected to significant stretching,NPR metamaterials designed under small strain assumption may experience a rapid degradation in NPR performance.To address this issue,this study aims to design metamaterials maintaining a targeted NPR under large deformation by taking advantage of the geometry nonlinearity mechanism.A representative periodic unit cell is modeled considering geometry nonlinearity,and its topology is designed using a gradient-free method.The unit cell microstructural topologies are described with the material-field series-expansion(MFSE)method.The MFSE method assumes spatial correlation of the material distribution,which greatly reduces the number of required design variables.To conveniently design metamaterials with desired NPR under large deformation,we propose a two-stage gradient-free metamaterial topology optimization method,which fully takes advantage of the dimension reduction benefits of the MFSE method and the Kriging surrogate model technique.Initially,we use homogenization to find a preliminary NPR design under a small deformation assumption.In the second stage,we begin with this preliminary design and minimize deviations in NPR from a targeted value under large deformation.Using this strategy and solution technique,we successfully obtain a group of NPR metamaterials that can sustain different desired NPRs in the range of[−0.8,−0.1]under uniaxial stretching up to 20% strain.Furthermore,typical microstructure designs are fabricated and tested through experiments.The experimental results show good consistency with our numerical results,demonstrating the effectiveness of the present gradientfree NPR metamaterial design strategy.

A gated recurrent unit model to predict Poisson’s ratio using deep learning

Static Poisson’s ratio(vs)is crucial for determining geomechanical properties in petroleum applications,namely sand production.Some models have been used to predict vs;however,the published models were limited to specific data ranges with an average absolute percentage relative error(AAPRE)of more than 10%.The published gated recurrent unit(GRU)models do not consider trend analysis to show physical behaviors.In this study,we aim to develop a GRU model using trend analysis and three inputs for predicting n s based on a broad range of data,n s(value of 0.1627-0.4492),bulk formation density(RHOB)(0.315-2.994 g/mL),compressional time(DTc)(44.43-186.9 μs/ft),and shear time(DTs)(72.9-341.2μ s/ft).The GRU model was evaluated using different approaches,including statistical error an-alyses.The GRU model showed the proper trends,and the model data ranges were wider than previous ones.The GRU model has the largest correlation coefficient(R)of 0.967 and the lowest AAPRE,average percent relative error(APRE),root mean square error(RMSE),and standard deviation(SD)of 3.228%,1.054%,4.389,and 0.013,respectively,compared to other models.The GRU model has a high accuracy for the different datasets:training,validation,testing,and the whole datasets with R and AAPRE values were 0.981 and 2.601%,0.966 and 3.274%,0.967 and 3.228%,and 0.977 and 2.861%,respectively.The group error analyses of all inputs show that the GRU model has less than 5% AAPRE for all input ranges,which is superior to other models that have different AAPRE values of more than 10% at various ranges of inputs.

Model test of negative Poisson’s ratio cable for supporting super-largespan tunnel using excavation compensation method

In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult.Unfortunately,there are few studies on the failure and support mechanism of the surrounding rocks in the excavation of supported tunnel,while most model tests of super-large-span tunnels focus on the failure characteristics of surrounding rocks in tunnel excavation without supports.Based on excavation compensation method(ECM),model tests of a super-large-span tunnel excavation by different anchor cable support methods in the initial support stage were carried out.The results indicate that during excavation of super-large-span tunnel,the stress and displacement of the shallow surrounding rocks decrease,following a step-shape pattern,and the tunnel failure is mainly concentrated on the vault and spandrel areas.Compared with conventional anchor cable supports,the NPR(negative Poisson’s ratio)anchor cable support is more suitable for the initial support stage of the super-large-span tunnels.The tunnel support theory,model test materials,methods,and the results obtained in this study could provide references for study of similar super-large-span tunnels。

The Impact of Fabric Weave and Anisotropy on the Poisson’s Ratio in Technical Fabrics

Poisson’s ratio changes during the tensile stress of technical fabric samples due to the anisotropy of technical fabrics.This paper examines the effects of the type of weave and the anisotropic characteristics of the technical fabric on maximum tensile force,corresponding elongation,work-to-maximum force,elasticity modulus,and Poisson’s ratio when axial tensile forces are applied to samples cut at various angles in the direction of the weft yarns of the technical fabric.In the lab,3 cotton fabric samples of constant warp and weft density with different structural weave types(plain weave,twill weave,atlas weave)were subjected to the tensile force until they broke at the following angles:0°,15°,30°,45°,60°,75°,90°.Based on the different measured values of technical fabric stretching in the longitudinal direction and lateral narrowing,Poisson’s ratio is calculated.The Poisson’s ratio was calculated up to a relative elongation of the fabric of 8%,as the buckling of the fabric occurs according to this elongation value.According to the results presented in this paper,the type of weave of the fabric,the direction of tensile force,and the relative narrowing of the technical fabrics all play important roles in the Poisson’s ratio value.The Poisson’s ratio curve of a technical fabric under tensile stress(i.e.elongation)is primarily determined by its behaviour in the opposite direction of the elongation.The change in the value of the Poisson’s ratio is represented by a graph that first increases nonlinearly and then decreases after reaching its maximum value.

Effects of porosity on seismic velocities, elastic moduli and Poisson's ratios of solid materials and rocks

The generalized mixture rule(GMR) is used to provide a unified framework for describing Young’s(E),shear(G) and bulk(K) moduli, Lame parameter(l), and P- and S-wave velocities(Vpand Vs) as a function of porosity in various isotropic materials such as metals, ceramics and rocks. The characteristic J values of the GMR for E, G, K and l of each material are systematically different and display consistent correlations with the Poisson’s ratio of the nonporous material(v0). For the materials dominated by corner-shaped pores, the fixed point at which the effective Poisson’s ratio(n) remains constant is at v0=0.2, and J(G) > J(E) > J(K) > J(l) and J(G) < J(E) < J(K) < J(l) for materials with v0> 0.2 and v0< 0.2, respectively.J(Vs) > J(Vp) and J(Vs) < J(Vp) for the materials with v0> 0.2 and v0< 0.2, respectively. The effective n increases, decreases and remains unchanged with increasing porosity for the materials with v0< 0.2,v0> 0.2 and v0=0.2, respectively. For natural rocks containing thin-disk-shaped pores parallel to mineral cleavages, grain boundaries and foliation, however, the n fixed point decreases nonlinearly with decreasing pore aspect ratio(a: width/length). With increasing depth or pressure, cracks with smaller a values are progressively closed, making the n fixed point rise and finally reach to the point at v0=0.2.

Crustal Poisson's ratio anomalies in the eastern part of North China and their origins

Seismic tomography can provide both fine P-wave and S-wave velocity structures of the crust and upper mantle. In addition, with proper computation, Poisson＇s ratio images from the seismic velocities can be determined. However, it is unknown whether Poisson＇s ratio images have any advantages when compared with the P-wave and S-wave velocity images. For the purposes of this study, high- resolution seismic tomography under the eastern part of North China region was used to determine detailed 3-D crustal P- and S-wave seismic velocities structure, as well as Poisson＇s ratio images. Results of Poisson＇s ratio imaging show high Poisson＇s ratio （high-PR） anomalies located in the Hengshan-North Taihang-Zhangjiakou （H-NT-Z） region, demonstrating that Poisson＇s ratio imaging can provide new geophysical constraints for regional tectonic evolution. The H-NT-Z region shows a prominent and continuous high-PR anomaly in the upper crust. Based on Poisson＇s ratio images at different depths, we find that this high-PR anomaly is extending down to the middle crust with thickness up to about 26 kin. According to rock physical property measurements and other geological data, this crustal Poisson＇s ratio anomaly can be explained by Mesozoic partial melting of the upper mantle and basaltic magma underplating related to the lithospheric thinning of the North China craton.

Design, Characterization, and 3D Printing of Cardiovascular Stents with Zero Poisson’s Ratio in Longitudinal Deformation

Inherent drawbacks associated with drug-eluting stents have prompted the development of bioresorbable cardiovascular stents.Additive manufacturing(3-dimentional(3D)printing)has been widely applied in medical devices.In this study,we develop a novel screw extrusion-based 3D printing system with a new designed mini-screw extruder to fabricate stents.A stent with a zero Poisson’s ratio(ZPR)structure is designed,and a preliminary monofilament test is conducted to investigate appropriate fabrication parameters.3D-printed stents with different geometric structures are fabricated and analyzed by observation of the surface morphology.An evaluation of the mechanical properties and a preliminary biological evaluation of 3D-printed stents with different parameters are carried out.In conclusion,the screw extrusion-based 3D printing system shows potential for customizable stent fabrication.

Modeling of Fatigue Crack Growth Closure Considering the Integrative Effect of Cyclic Stress Ratio,Specimen Thickness and Poisson's Ratio

Key components of large structures in aeronautics industry are required to be made light and have long enough fatigue lives.It is of vital importance to estimate the fatigue life of these structures accurately.Since the FCG process is affected by various factors,no universal model exists due to the complexity of the mechanisms.Most of the existing models are obtained by fitting the experimental data and could hardly describe the integrative effect of most existing factors simultaneously.In order to account for the integrative effect of specimen parameters,material property and loading conditions on FCG process,a new model named integrative influence factor model（IIF） is proposed based on the plasticity-induced crack closure theory.Accordingly to the predictions of crack opening ratio（γ） and effective stress intensity factor range ratio（U） with different material under various loading conditions,predictions of γ and U by the IIF model are completely identical to the theoretical results from the plane stress state to the plane strain state when Poisson＇s ratio equals 1/3.When Poisson＇s ratio equals 0.3,predictions of γ and U by the IIF model are larger than the predictions by the existing model,and more close to the theoretical results.In addition,it describes the influence of R ratios on γ and U effectively in the whole region from-1.0 to 1.0.Moreover,several sets of test data of FCG rates in 5 kinds of aluminum alloys with various specimen thicknesses under different loading conditions are used to validate the IIF model,most of the test data are situated on the predicted curves or between the two curves that represent the specimen with different thicknesses under the same stress ratio.Some of the test data slightly departure from the predictions by the IIF model due to the surface roughness and errors in measurement.Besides,based on the analysis of the physical rule of crack opening ratios,a relative thickness of specimen is defined to describe the influence of material property,specimen thickness and so forth on FCG characteristics conveniently.In conclusion,the relative thickness of specimen simplifies the expression of FCG characteristic and provides a general parameter to analyze the fatigue characteristics of different materials with various thicknesses under different loading conditions.The IIF model describes the integrative effect of existing influence factors explicitly and quantitatively,and provides a helpful tool for fatigue property estimation of practical component and experiment design.

Negative Poisson's ratio and peripheral strain of an NPR anchor cable

Materials with a negative Poisson’s ratio effect perform significantly better than traditional materials for rock mass impact resistance,shear resistance,and energy absorption.Based on these advantages,a negative Poisson’s ratio anchor cable(NPR anchor cable)with high elongation and constant resistance was developed and successfully applied in the field of mine disaster control.However,theoretical and experimental research on the negative Poisson’s ratio effect and peripheral strain characteristics of NPR anchor cables is currently incomplete.This study used several theories and methods,such as static tensile,peripheral strain measurement,and static negative Poisson’s ratio measurement,to investigate the radial deformation law of an NPR anchor cable and the negative Poisson’s ratio characteristics.Experimental results elucidated constant resistance changes in an NPR anchor cable during operation,the motion of the constant resistance body in the constant resistance sleeve,and the deformation law of the constant resistance sleeve.Negative Poisson’s ratio characteristics of the NPR anchor cable and its superior energy absorption characteristics were verified and it provided a theoretical and experimental basis for energy absorption mechanisms of an NPR anchor cable.

A note on influence of stress anisotropy on the Poisson's ratio of dry sand

In this study, extender and bender element tests were conducted investigating the small-strain Poisson’s ratio of variable sands, with a focus on the effect of stress anisotropy in order to quantify the sensitivity of Poisson’s ratio to the applied deviatoric stress. Four different uniform sands were tested, including a biogenic sand, a crushed rock and two natural sands, covering a wide range of particle shapes. From these sands, eleven samples were prepared in the laboratory and were tested under variable stress paths,maintaining a constant mean effective pressure while increasing the deviatoric compressive load. Under the application of these given stress paths, the data analysis indicated that the sensitivity of Poisson’s ratio to the stress ratio was more pronounced for sands with irregularly shaped particles in comparison to sands with fairly rounded and spherical grains. For sands with very irregularly shaped particles, the increase of Poisson’s ratio from the isotropic to the anisotropic stress state reached 50%, while this increase for natural sands with fairly rounded particles was in the order of 20%.

Effect of Poisson’s ratio on stress state in the Wenchuan M_S8.0 earthquake fault

The Wenchuan Ms8.0 earthquake occurred on the Longmenshan fault which inclines at a dip angle exceeding 60 degrees. Since most thrust earthquakes occur on faults with dip angles of about 30 degrees, it is enigmatic why the Wenchuan earthquake occurred on such a steep fault. In this study we use a simple finite element model to investigate how the stress state in the fault changes with the variation of Poisson＇s ratio. The results show that, with the Poisson＇s ratio in the fault increasing, the magnitudes of the principal stresses increase and the maximum Shear stress decrease, and, especially, the angle between the maximum principal stress and the fault plane decreases, which will enhance the driving force to overcome the frictional resistance on the fault. The increase of Poisson＇s ratio in the fault may be an important factor to affect the occurrence of the fault earthquakes with large angles between maximum principal stress and fault plane.

Topological Design of Microstructures of Materials Containing Multiple Phases of Distinct Poisson’s Ratios

A methodology for achieving the maximum bulk or shear modulus in an elastic composite composed of two isotropic phases with distinct Poisson’s ratios is proposed.A topology optimization algorithm is developed which is capable of finding microstructures with extreme properties very close to theoretical upper bounds.The effective mechanical properties of the designed composite are determined by a numerical homogenization technique.The sensitivities with respect to design variables are derived by simultaneously interpolating Young’smodulus and Poisson’s ratio using different parameters.The so-called solid isotropicmaterial with penalizationmethod is developed to establish the optimization formulation.Maximum bulk or shearmodulus is considered as the objective function,and the volume fraction of constituent phases is taken as constraints.Themethod ofmoving asymptotes is applied to update the design variables.Several 3D numerical examples are presented to demonstrate the effectiveness of the proposed structural optimization method.The effects of key parameters such as Poisson’s ratios and volume fractions of constituent phase on the final designs are investigated.A series of novel microstructures are obtained fromthe proposed approach.It is found that the optimized bulk and shearmoduli of all the studied composites are very close to the Hashin-Shtrikman-Walpole bounds.

Near-zero Poisson's ratio and suppressed mechanical anisotropy in strained black phosphorene/SnSe van der Waals heterostructure:a first-principles study

Black phosphorene(BP)and its analogs have attracted intensive attention due to their unique puckered structures,anisotropic characteristics,and negative Poisson’s ratio.The van der Waals(vdW)heterostructures assembly by stacking different materials show novel physical properties,however,the parent materials do not possess.In this work,the first-principles calculations are performed to study the mechanical properties of the vdW heterostructure.Interestingly,a near-zero Poisson’s ratio ν_(zx)is found in BP/SnSe heterostructure.In addition,compared with the parent materials BP and SnSe with strong in-plane anisotropic mechanical properties,the BP/SnSe heterostructure shows strongly suppressed anisotropy.The results show that the vdW heterostructure has quite different mechanical properties compared with the parent materials,and provides new opportunities for the mechanical applications of the heterostructures.

EFFECTS OF POISSON’S RATIO ON SCALING LAW IN HERTZIAN FRACTURE

In this paper the Auerbach＇s scaling law of Hertzian fracture induced by a spherical indenter pressing on a brittle solid is studied. In the analysis, the singular integral equation method is used to analyze the fracture behavior of the Hertzian contact problem. The results show that the Auerbach＇s constant sensitively depends on the Poisson＇s ratio, and the effective Auerbach＇s domain is also determined for a given value of the Poisson＇s ratio.

Poisson比对弯曲波在变截面梁中传播特性的影响

基于Timoshenko理论和梁几何不连续处位移连续和力平衡条件,得到弯曲波在变截面梁中反射和透射系数矩阵,进而研究材料Poisson比对弯曲波在梁变截面处传播特性的影响.结果显示,在负Poisson比阶段,透射传播波的振幅和能量有显著下降趋势,反射传播波振幅和能量上升明显.这说明负Poisson比有利于反射传播波在变截面处的生成,对透射传播波有抑制作用.此外通过对衰减波能量的分析,得到Euler-Bernoulli理论即使在低频范围内,有时会产生较大误差,因此在使用Euler-Bernoulli理论时应慎重.

Energy Absorption by 3D-Printed Mesh Structures with a Negative Poisson’s Ratio

A negative Poisson's ratio(NPR)structure represents optimal impact-resistance with applications in various fields,including the crash box in vehicles,which absorbs impact kinetic energy.The crash box is designed to deform in response to impact,increasing local structural density,which enhances impact resistance performance.Current studies have only focused on the NPR effect in the plane dimension at low-speed loads.Few studies have considered high-speed impact loads on three-dimensional NPR structures.We have developed two types of AlSi10Mg alloy energy-absorbing structures with NPR using three-dimensional printing technology,and have compared our systems with a conventional hexagonal mesh structure.Sample testing involved split-Hopkinson pressure bar measurements,which showed good agreement with dynamic numerical simulations.When subjected to an impact load,the NPR structure exhibited better impact resistance and energy absorption compared with the positive Poisson's ratio structure.The proposed dual-layer hexagonal structure ensures an NPR effect while exhibiting higher strength and improved stability relative to the conventional concave hexagon structure.

Experimental study on the shear performance of quasi-NPR steel bolted rock joints

Quasi-NPR(negative Poisson’s ratio)steel is a new type of super bolt material with high strength,high ductility,and a micro-negative Poisson’s effect.This material overcomes the contrasting characteristics of the high strength and high ductility of steel and it has significant energy-absorbing characteristics,which is of high value in deep rock and soil support engineering.However,research on the shear resistance of quasi-NPR steel has not been carried out.To study the shear performance of quasi-NPR steel bolted rock joints,indoor shear tests of bolted rock joints under different normal stress conditions were carried out.Q235 steel and#45 steel,two representative ordinary bolt steels,were set up as a control group for comparative tests to compare and analyze the shear strength,deformation and instability mode,shear energy absorption characteristics,and bolting contribution of different types of bolts.The results show that the jointed rock masses without bolt reinforcement undergo brittle failure under shear load,while the bolted jointed rock masses show obvious ductile failure characteristics.The shear deformation ca-pacity of quasi-NPR steel is more than 3.5 times that of Q235 steel and#45 steel.No fracture occurs in the quasi-NPR steel during large shear deformation and it can provide stable shear resistance.However,the other two types of control bolts become fractured under the same conditions.Quasi-NPR steel has significant energy-absorbing characteristics under shear load and has obvious advantages in terms of absorbing the energy released by shear deformation of jointed rock masses as compared with ordinary steel.In particular,the shear force plays a major role in resisting the shear deformation of Q235 steel and#45 steel,therefore,fracture failure occurs under small bolt deformation.However,the axial force of quasi-NPR steel can be fully exerted when resisting joint shear deformation;the steel itself does not break when large shear deformation occurs,and the supporting effect of the jointed rock mass is effectively guaranteed.

Petrophysical properties and their influencing factors of carbonates in the fourth member of Sinian Dengying Formation, Sichuan Basin, SW China

Based on the measurements of petrological, petrophysical and elastic properties of the samples of different sedimentary facies in the fourth member of Sinian Dengying Formation (Deng 4 Member) in the Sichuan Basin, the diagenetic processes of reservoirs of different sedimentary facies and their controls on the petrophysical properties were discussed. The results show that cracks and mineral composition jointly control the petrophysical properties, and both are significantly influenced by sedimentary environment and diagenesis. The microbial dolomite of mound-shoal facies mainly experienced multi-stage dolomitization, penecontemporaneous dissolution, tectonic rupture and hydrothermal/organic acid dissolution processes, giving rise to cracks and dissolved pores. The grannular dolomite of inter-mound-shoal bottomland or dolomitic lagoon facies mainly underwent mechanical compaction, burial dolomitization and tectonic-hydrothermal action, creating cracks and intercrystalline pores. The diagenesis related to crack development increases the pressure- and saturation-dependent effects of samples, leading to significant decrease in the compressional wave impedance and Poisson's ratio. Dolomitization changes the properties of mineral particles, resulting in a Poisson's ratio close to dolomite. The muddy, siliceous and calcareous sediments in the low-energy environment lead to the decrease of impedance and the differential change of Poisson's ratio (significantly increased or decreased). The samples with both cracks and dissolved pores show high P-wave velocity dispersion characteristics, and the P-wave velocity dispersion of samples with only fractures or pores is the lowest.

Auxetics in Biomedical Applications: A Review

Materials exhibiting auxetic properties have a negative Poisson’s ratio, which intrigued researchers to understand the behavior of auxetic structure. Several researchers focused on the different auxetic cell designs, while others focused on the auxetic applications. With the advance of additive manufacturing methods, computer-aided design and finite element analysis in recent decades, auxetics have been explored. One of the interesting applications is in the field of biomedical devices or implants, especially for certain natural biomedical organs such as tissues, certain ligaments that have auxetic properties. This paper is an overview of auxetic design approaches and biomedical applications.

岩爆机制及其控制

随着岩体工程向深部发展,开挖引发的围岩大变形和强冲击诱发的动力破坏日益严峻。岩爆作为深部地下工程中常见的一种强动力灾害,被称为岩土工程界的“癌症”,其具有突发性特点,难以有效预报及防治,严重地威胁着施工人员的安全和设备的正常运行。通过对比岩石在真三轴卸荷和单轴压缩这2种应力路径下的储能差异,对岩爆多余能量机制进行探讨。首先,根据岩爆诱发机制的不同,将岩爆分为由应力集中导致的应变型岩爆和扰动诱发的冲击岩爆。然后,模拟开挖诱发的不同类型岩爆的应力路径进而在室内再现各种岩爆现象,并对其机制进行研究,自主研发3套真三轴岩爆模拟试验系统:第1代应变岩爆试验系统、第2代应变岩爆试验系统、冲击岩爆试验系统。同时,在实验室内成功模拟不同类型的岩爆:巷道应变岩爆、巷道交叉点应变岩爆、3个临空面矿柱应变岩爆、矿柱应变岩爆以及动荷载诱发的冲击岩爆。最后,为有效控制岩爆灾害,提出开挖补偿法,并研发具有负泊松比效应的宏观和微观NPR锚杆/索。工程实践证明,NPR锚杆/索能提供高预应力来补偿开挖造成的应力损失,同时具备良好的延展性和吸能效果,可为岩爆灾害的防治提供有效途径。