Relationship measurement between ac-Stark shift of^40Ca^+clock transition and laser polarization direction

Ac-Stark shift of atom levels is caused by an ac-electromagnetic field. As an electromagnetic wave, laser light does induce ac-Stark shift. It is proved experimentally that if the light is linearly polarized, the dynamic polarizability changes with polarization direction. The polarization direction of the linearly-polarized laser is tuned by 720°, and the ac-Stark shifts of the 4S1/2,m=±1/2→3D5/2,m=±1/2 clock transitions in ^40Ca^＋ are measured in steps of 10°. The frequency shifts change with laser polarization in a periodical manner and have values opposite to each other.

The scattering fields for a spherical target irradiated by a plane electromagnetic wave in an arbitrary direction

The relation between corresponding trigonometric functions in two rotating coordinate systems is presented. The transformation formula for a vector in the two rotating spherical coordinate systems is obtained. The scattering fields for a spherical target irradiated by a plane electromagnetic wave in an arbitrary direction are derived. These fields in a particular case retrogress to those available in the literature. The obtained results have great potential in practical applications.

Shear wave splitting analysis of local earthquakes from dense arrays in Shimian,Sichuan

The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthquakes.In this study,we used local seismic waveform data recorded using dense arrays deployed in the Shimian area to obtain the shear wave splitting parameters at 55 seismic stations and thereby determine the crustal anisotropic characteristics of the region.We then analyzed the crustal stress pattern and tectonic setting and explored their relationship in the study area.Although some stations returned a polarization direction of NNW-SSE.a dominant polarization direction of NW-SE was obtained for the fast shear wave at most seismic stations in the study area.The polarization directions of the fast shear wave were highly consistent throughout the study-area.This orientation was in accordance with the direction of the regional principal compressive stress and parallel to the trend of the Xianshuihe and Daliangshan faults.The distribution of crustal anisotropy in this area was affected by the regional tectonic stress field and the fault structures.The mean delay time between fast and slow shear waves was 3.83 ms/km.slightly greater than the values obtained in other regions of Sichuan.This indicates that the crustal media in our study area had a high anisotropic strength and also reveals the influence of tectonic complexity resulting from the intersection of multiple faults on the strength of seismic anisotropy.

Upper crustal anisotropy observed around the Longmenshan fault in the 2013 M_S7.0 Lushan earthquake region

Based on the shear wave splitting analysis of the seismic recordings at 17 temporary stations and three permanent stations, we measured the shear wave splitting parameters(i.e., the polarization direction of fast shear wave and the time delay of slow wave) to perform a systematic analysis of the crustal seismic anisotropy around the Longmenshan fault in the 2013 M7.0 Lushan earthquake region. We observed apparent spatio-temporal characteristics in the shear wave splitting parameters. The spatial distribution of fast polarization directions showed a clear partitioning in the characteristics from northwest to southeast in the focal region,which changed from NW-SE to NE-SW. In the northwest of the focal region, the fast polarization direction was oriented to NW-SE, which was parallel to the maximum horizontal compressive stress direction. However, the NE-SW fast polarization direction in the southeast of the focal region was parallel to the Longmenshan fault strike. For station BAX on the Central fault in the middle of the focal region, the distribution of fast polarization directions showed a bimodal pattern, with one dominant in the NE-SW direction and the other in the NW-SE direction. With regard to the temporal variation, the time delays were large in the initial stage after the mainshock but then gradually decreased over time and tended to be stable in the later period. This indicated that stress in the focal region increased to a maximum when the main shock occurred, with the stress release caused by the mainshock and aftershock activity, and the stress gradually decreased after a period of time. The scatter of fast polarization directions was large after the main shock, but over time the scatter gradually decreased, indicating that the Lushan earthquake caused a large perturbation in the local stress field. As the stress gradually decreased and was adjusted by the aftershock activity, the perturbation gradually weakened.

The characteristics of shear wave splitting in the source region of the April 20,2013 Lushan earthquake

Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams, this paper preliminarily contains the polarization directions of fast shear wave and the time-delays of split shear waves at every station, and analyzes the crustal anisotropic characteristics in the source region. In the study area, the polarization direc- tions at stations BAX, TQU, L 132, L 133, L 134, and L 135 are northeast, which is consistent with the strike of Dachuan- Shuangshi fault. There are two polarization directions at MDS and L131, which are northeast and southeast. The scatter of polarization directions suggests the complex stress field around these two stations where two faults intersect. For the normalized time-delays at every station, the range is 1.02-8.64 ms/km. The largest time-delay is from L134 which is closest to the mainshock, and the smallest one is from L133. The variations in time-delays show the decreasing at stations BAX, L134, and L135 because of the stress-relaxation after earthquake.

Study on S wave splitting in Dayao earth-quake sequence with M=6.2 and M=6.1 in Yunnan in 2003

The polarization direction of fast wave and the delay time between fast and slow wave were measured for two earthquake sequences occurred continuously on 21 July （M=6.2） and 16 October （M=6.1） in Dayao, Yunnan in 2003 using cross-correlation coefficient method, after determining the high-resolution hypocentral locations of the earthquake sequences using the double-difference earthquake location algorithm. The results indicated that ① The phenomena of S wave splitting are obvious in the two earthquake sequences, and the average polarization directions of fast wave in most stations are almost consistent with regional maximum horizontal compressive stress direction except the station Santai. There are bimodal fast directions in the polarization directions at station Santai and the mean polarization direction is N80°E, indicating an inconsistent phenomenon referred to regional maximum horizontal compressive stress direction. ② There is no apparent relation between delay time and focal depth in the sequences, but the polarization direction show different character in different delay time range. ③ The comparison of S wave splitting results in the two earthquake sequences show that the polarization direction in M=6.2 earthquake sequence is more scattered and its average fast direction is 20° larger than that of M=6.1 sequence, and the delay times between two sequences show a little difference. ④ The spatial variation in S wave splitting polarization direction may be due to the stress disturbance imposed by the M=6.2 and the M=6.1 mainshocks on regional background stress field.

Optimization of laser illumination configuration for directly driven inertial confinement fusion

Optimum laser configurations are presented to achieve high illumination uniformity with directly driven inertial confinement fusion targets.Assuming axisymmetric absorption pattern of individual laser beams,theoretical models are reviewed in terms of the number of laser beams,system imperfection,and laser beam patterns.Utilizing a self-organizing system of charged particles on a sphere,a simple numerical model is provided to give an optimal configuration for an arbitrary number of laser beams.As a result,such new configurations as“M48”and“M60”are found to show substantially higher illumination uniformity than any other existing direct drive systems.A new polar direct-drive scheme is proposed with the laser axes keeping off the target center,which can be applied to laser configurations designed for indirectly driven inertial fusion.

Effects of Silica Fume and Steel Fiber on Chloride Ion Penetration and Corrosion Behavior of Cement-based Composites

This project was aimed to evaluate the chloride permeability and corrosion behavior of cement-based composites which comprised fibers and silica fume in the mixes~ Resistivity, polarization resistance, ponding and rapid chloride penetration results of specimens were obtained through tests. Test results indicate that resistivity, open circuit potentials and direct current polarization of specimens with w/b ratio of 0.35 are higher than those of specimens with w/b ratio of 0.55. For length-diameter ratio of 65, resistivity and direct current polarization of specimens with fiber length of 35 mm were similar to those of 60 mm. In addition the open circuit potentials of specimens with fiber length of 60 mm were slightly higher that those of 35 mm. The resistivity decreased with increasing steel fiber content, and the open circuit potential and direct current polarization increased with increasing steel fiber content. The specimens containing silica fume were found to provide higher resistivity, open circuit potentials and direct current polarization than the control specimens. The incorporation of steel fiber and silica fume in composites achieved more significantly decreases in resistivity and increases in direct current polarization than steel fiber composites or silica fume composites. The penetration depth and six-hour total charge passed of specimens for w/b ratio of 0.35 were lower than those for w/b ratio of 0.55. For length-diameter ratio of 65, the penetration depth of specimens for fiber length of 35 mm was similar to that of 60 mm. The penetration depth decreased with increased steel fiber content in the composites. By regression analysis, a good correlation between open circuit potential and direct current polarization, and chloride penetration depth and direct current polarization.

Estimation of DOA and Polarization with COLD Sensors Based on Quaternion Model

The quaternion multiple signal classification（Q-MUSIC）algorithm generally requires four-dimensional spectral peak search to estimate the direction of arrival（DOA）and polarization parameters,which would result in the huge computation burden.A dimension reduction Q-MUSIC algorithm（DRQ-MUSIC）based on L-shaped array is presented to reduce the computational complexity in this paper.The proposed algorithm divides the steering vector into three parts,and estimates each part separately,thus DOA and polarization parameters can be estimated only by N times one-dimensional spectral peak search,where N denotes the sources number.Besides,pair match is not required.Finally,simulation examples demonstrate the effectiveness and feasibility of the proposed algorithm.

高分五号卫星大气参数探测综述

高分五号卫星搭载了大气痕量气体差分吸收光谱仪、主要温室气体探测仪、大气多角度偏振探测仪、大气环境红外甚高分辨率探测仪、可见短波红外高光谱相机和全谱段光谱成像仪共6台载荷,对全球环境监测及中国大气气溶胶、臭氧、二氧化硫、二氧化氮、二氧化碳、甲烷和云等多个环境与气象综合监测方面有着重要的意义。为了更好的了解高分五号卫星任务的大气监测内容,本文对高分五号卫星其中的4个大气探测载荷特征和数据处理算法进展进行了总结,涉及各个载荷参数信息、算法介绍和产品初步结果等相关内容。高分五号卫星是中国专门用于大气环境监测任务的遥感卫星,随着后续卫星的发射升空,将对中国乃至全球大气环境监测提供强有力的数据支撑。

Geometric Deformations Based on 3D Volume Morphing

This paper presents a new geometric deformation method based on 3D volume morphing by using a new concept called directional polar coordinate. The user specifies the source control object and the destination control object which act as the embedded spaces. The source and the destination control objects determine a 3D volume morphing which maps the space enclosed in the source control object to that of the destination control object. By embedding the object to be deformed into the source control object, the 3D volume morphing determines the deformed object automatically without the tiring moving of control points. Experiments show that this deformation model is efficient and intuitive, and it can achieve some deformation effects which are difficult to achieve for traditional methods.