Fully spin-polarized, valley-polarized and spin-valley-polarized electron beam splitters utilizing zero-line modes in a three-terminal device

Topological zero-line modes(ZLMs) with spin and valley degrees of freedom give rise to spin, valley and spinvalley transport, which support a platform for exploring quantum transport physics and potential applications in spintronic/valleytronic devices. In this work, we investigate the beam-splitting behaviors of the charge current due to the ZLMs in a three-terminal system. We show that with certain combinations of ZLMs, the incident charge current along the interface between different topological phases can be divided into different polarized currents with unit transmittance in two outgoing terminals. As a result, fully spin-polarized, valley-polarized and spin-valley-polarized electron beam splitters are generated. The mechanism of these splitters is attributed to the cooperative effects of the distribution of the ZLMs and the intervalley and intravalley scatterings that are modulated by the wave-vector mismatch and group velocity mismatch. Interestingly, half-quantized transmittance of these scatterings is found in a fully spin-valley-polarized electron beam splitter.Furthermore, the results indicate that these splitters can be applicable to graphene, silicene, germanene and stanene due to their robustness against the spin–orbit coupling. Our findings offer a new way to understand the transport mechanism and investigate the promising applications of ZLMs.

High-speed polarization mode dispersion compensation in a 43-Gb/s RZ-DQPSK transmission system over 1200 km of standard single-mode fibre

This paper reports that the designed optical polarization mode dispersion compensator shows a good performance under the real-time variation of differential group delay, state of polarization and principal state of polarization in a （40×43）-Gb/s dense-wavelength-multiplexing, 1200-km enhanced return-to-zero differential-quadrature-phase-shift- keying （RZ-DQPSK） system. The polarization mode dispersion tolerance of the system is improved by 26 ps using the optical polarization mode dispersion compensator. The short and long time stabilities are tested with the bit error ratio recorded.

Silicon-integrated high-speed mode and polarization switch-andselector

On-chip optical communications are growingly aiming at multimode operation together with mode-division multiplex-ing to further increase the transmission capacity.Optical switches,which are capable of optical signals switching at the nodes,play a key role in optical networks.We demonstrate a 2×2 electro-optic Mach-Zehnder interferometer-based mode-and polar-ization-selective switch fabricated by standard complementary metal-oxide-semiconductor process.An electro optic tuner based on a PN-doped junction in one of the Mach-Zehnder interferometer arms enables dynamic switching in 11 ns.For all the channels,the overall insertion losses and inter-modal crosstalk values are below 9.03 and-15.86 dB at 1550 nm,respect-ively.

Design and analysis of a novel single-mode single-polarization photonic crystal fibre based on polarization-dependent coupling and absorption effect

A novel single-mode single-polarization （SMSP） photonic crystal fibre has been proposed and analysed based on the polarization-dependent coupling and absorption effect via a full-vector finite element method with perfectly matched layers. The numerical results predict that very efficient SMSP operation can be achieved with both high bandwidth and high extinction ratio at low loss penalty. Effects of the fibre structural parameters on the SMSP bandwidth and extinction ratio have been explored, which will provide useful guide for the design and fabrication of the fibre. The results obtained will be instructive for the realization of new SMSP fibres with high performance.

Mueller matrix analysis for all optical fiber co-existence of birefringence-polarization dependent gain-mode coupling at a single wavelength

Birefringence （polarization-related phase-shift）, polarization dependent gain （PDG） and mode coupling are three factors that may synchronously influence the transmission of single-wavelength polarized light in optical fibers. This paper obtains a new Mueller matrix analysis, which can be used under conditions that all these three factors are existing and changing. According to our transmission model, the state of polarization （SOP） changes along an optical mierostructure fiber with co-existence of birefringence-PDG-mode coupling were simulated. The simulated results, which show the phenomena of SOP constringency, are in good agreement with previous theoretical analyses.

Vertical cavity surface emitting laser transverse mode and polarization control by elliptical hole photonic crystal

The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.

Low-repetition-rate, all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

A low-repetition-rate, all-polarization-maintaining（PM）-fiber sub-nanosecond oscillator is presented, which is simple and low-cost, composed of standard components. The ring cavity is elongated by 114-m-long standard PM fiber, and passively mode-locked by a fiber pigtailed semiconductor saturable absorber. Linearly polarized pulses with 1.66 MHz repetition rate and 22 dB polarization extinction ratio are generated at a wavelength of 1030 nm, which is determined by an intracavity filter. In addition, to demonstrate that the oscillator is a good seed for high energy pulse generation, an all-fiber master oscillator power amplifier is built and amplified pulses with energy about 2 μJ are obtained.

Light polarization and color from guided‐mode resonance filter

The characteristics of reflected light of a 1-D guided-mode resonance filter(GMRF)are studied in this paper.A triple-layer GMRF is designed by using the finite difference time domain method under non-polarized light illumination.Numerical results show that the reflectance spectra of TE and TM polarizations can be changed by altering the fill factor f of the GMRF.Moreover,by calculating the color of the reflected light with the chromaticity theory,we find that the color of reflected light becomes pure when f is 0.9.The results show that the color and polarization degree of the reflected light of a GMRF are tunable by altering the fill factor.

PSO-based Control Algorithm for Polarization Mode Dispersion Self-adaptive Compensation

Polarization mode dispersion(PMD) is considered to be the ultimate limitation in high-speed optical fiber communication systems. Establishing an effective control algorithm for adaptive PMD compensation is a challenging task, because PMD possesses the time-varying and statistical properties. The particle swarm optimization(PSO) algorithm is introduced into self-adaptive PMD compensation as feedback control algorithm. The experiment results show that PSO-based control algorithm has some unique features of rapid convergence to the global optimum without being trapped in local sub-optima and good robustness to noise in the optical fiber transmission line that has never been achieved in PMD compensation before.

Excellent polarization-independent reflector based on guided mode resonance effect

A broad band polarization-independent reflector working in the telecommunication C＋L band is proposed using the guided mode resonance effect of a periodic surface relief element deposited by a layer of silicon medium. It is shown that this structure can provide high reflection （R 〉 99.5%） and wide angular bandwidth （θ≈ 20°, R 〉 98%） for both TE and TM polarizations over a wide spectrum band 1.5 μm-l.6 μm. Furthermore, it is found by rigorous coupled wave analysis that the polarization-independent reflector proposed here is tolerant of a deviation of grating thickness, which makes it very easy to fabricate in experiments.

Polarization Characteristics of the Deformed Low-Mode Fiber Waveguides with Polarization Conservation

In this work the results of polarization researches of low-optical fiber waveguides with conservation of polarization are presented. Obtained results quite convincingly testify regarding a high sensitivity low-mode regime of work of an optical fiber to anisotropic external influences, in comparison with one-mode regime of work of the same fibre. This result, can represent a big practical value at the realization of high-sensitivity fiber-optical devices of different physical values.

Multichannel Adaptive Polarization Mode Dispersion Compensation with One Compensator in Dense Wavelength Division Multiplexing Transmission Systems

A simple two-section polarization mode dispersion(PMD) compensator is proposed for multichannel PMD compensation, which can compensate two or even more channels simultaneously. Because of the statistical characteristics and the frequency-dependence of PMD, for current single mode fiber with moderate PMD, the probability that all channels are severely degraded at the same time is extremely small, which makes it possible to compensate a dense wavelength division multiplexing(DWDM) transmission system with moderate PMD using this compensator. It is shown that the outage probability of a 40×43 Gb/s DWDM transmission system using this compensator is decreased significantly from 3.6×10-3 to 3.6×10-5.

A tunable comb filter using single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop

A novel tunable comb filter composed of a single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop is proposed and experimentally demonstrated. The filter tunability is achieved by rotating the polarization controller. The spectral shift is dependent on rotation direction and the position of the polarization controller. In addition, the adjustable range achieved by rotating the half-wave-plate polarization controller is twice higher than that of the quarter-wave-plate one.

A validated stability-indicating LC method for the separation of enantiomer and potential impurities of Linezolid using polar organic mode

Although a number of methods are available for evaluating Linezolid and its possible impurities, a common method for separation if its potential impurities, degradants and enantiomer in a single method with good efficiency remain unavailable. With the objective of developing an advanced method with shorter runtimes, a simple, precise, accurate stability-indicating LC method was developed for the determination of purity of Linezolid drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. This method is capable of separating all the related substances of Linezolid along with the chiral impurity. This method can also be used for the estimation of assay of Linezolid in drug substance as well as in drug product. The method was developed using Chiralpak IA (250 mm 4.6 mm, 5 mm) column. A mixture of acetonitrile, ethanol, n-butyl amine and trifluoro acetic acid in 96:4:0.10:0.16 (v/v/v/v) ratio was used as a mobile phase. The eluted compounds were monitored at 254 nm. Linezolid was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per International Conference on Harmonization (ICH) guidelines with respect to specificity, limit of detection, limit of quantification, precision, linearity, accuracy, robustness and system suitability.

Investigation of the mode splitting induced by electro-optic birefringence in a vertical-cavity surface-emitting laser by polarized electroluminescence

The mode splitting induced by electro-optic birefringence in a P-I-N InGaAs/GaAs/A1GaAs vertical-cavity surface- emitting laser （VCSEL） has been studied by polarized electroluminescence （EL） at room temperature. The polarized EL spectra with E｜｜[110] and E ｜｜ [150] directions, are extracted for different injected currents. The mode splitting of the two orthogonal polarized modes for a VCSEL device is determined, and its value increases linearly with the increasing injected current due to electro-optic birefringence; This article demonstrates that the polarized EL is a powerful tool to study the mode splitting and polarization anisotropy of a VCSEL device.

Polarization control and tuning efficiency of tunable vertical-cavity surface-emitting laser with internal-cavity sub-wavelength grating

We design an 850 nm tunable vertical-cavity surface-emitting laser(VCSEL)structure using an internal-cavity sub-wavelength grating.The use of such a tuning structure allows for wider wavelength tuning range and more stable single-polarization as compared to conventional tunable VCSELs.The features of the internal-cavity grating effect on the wavelength tuning and polarization characteristics of the tunable VCSEL are analyzed.The simulation results show that the largest wavelength tuning range achieves 44.2 nm,and the maximum orthogonal polarization suppression ratio(OPSR)is 33.4 dB(TE-type)and 38.7 dB(TM-type).

Improvement of the prediction accuracy of polar motion using empirical mode decomposition

Previous studies revealed that the error of pole coordinate prediction will significantly increase for a prediction period longer than 100 days, and this is mainly caused by short period oscillations. Empirical mode decomposition （EMD）, which is increasingly popular and has advantages over classical wavelet decomposition, can be used to remove short period variations from observed time series of pole co- ordinates. A hybrid model combing EMD and extreme learning machine （ELM）, where high frequency signals are removed and processed time series is then modeled and predicted, is summarized in this paper. The prediction performance of the hybrid model is compared with that of the ELM-only method created from original time series. The results show that the proposed hybrid model outperforms the pure ELM method for both short-term and long-term prediction of pole coordinates. The improvement of prediction accuracy up to 360 days in the future is found to be 24.91% and 26.79% on average in terms of mean absolute error （MAE） for the xp and yp components of pole coordinates, respectively.

Additional Raman Scattering Mechanism due to Transverse Polar Modes

Longitudinal polar modes generate a macroscopic electric field in piezoelectric crystals and cause an additional mechanism of Raman scattering. The classical theory holds that transverse polar modes cannot produce such an additional mechanism. Our quantum theory shows that there is an additional Raman scattering mechanism arising from the electro-optic effect of transverse polar modes.

Observation of wavelength-switchable solitons in an all-polarization-maintaining erbium-doped fiber cavity based on graphene saturable absorber reflector

We present the generation of wavelength-switchable single-polarization solitons in an all-polarization-maintaining erbium-doped fiber laser mode-locked by a graphene saturable absorber. Ultrashort pulses centered at the wavelength of 1531.6 nm with the duration of 816 fs and centered at the wavelength of 1557.8 nm with the duration of 402 fs are separately obtained from the same fiber laser cavity. The cavity loss adjusted by the gold reflector plays a crucial role in wavelength switching.

Broadband non-polarizing beam splitter based on guided mode resonance effect

A broadband non-polarizing beam splitter （NPBS） operating in the telecommunication C＋L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator （SOI） elements. It is shown that this double layer SOI structure can provide ~50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4μm-l.7 μm and i% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology.