期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Gas Sensitivity of Poly (3, 4-ethylene dioxythiophene) Prepared by a Modified LB Film Method
1
作者 郑华靖 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2011年第1期70-74,共5页
An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl mo... An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly (3, 4-ethylene dioxythiophene) (PEDOT) multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration (20-60 ppm) and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film(about 80 seconds). It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends. 展开更多
关键词 poly (3 4-ethylene dioxythiophene) (pedot Langmuir-Blodgett (LB) film method gas sensitivity measurement
下载PDF
导电聚合物PEDOT的制备及导电性能 被引量:5
2
作者 崔琛琛 王茗 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2012年第11期1541-1545,共5页
文章采用化学氧化聚合法,以过硫酸铵为氧化剂,质子酸为掺杂剂合成了聚乙烯二氧噻吩(PEDOT)导电聚合物,研究了掺杂剂种类、聚合温度以及试剂比例对聚合速率及电导率的影响。研究结果表明:盐酸、冰醋酸及樟脑磺酸掺杂后能显著提高聚合物... 文章采用化学氧化聚合法,以过硫酸铵为氧化剂,质子酸为掺杂剂合成了聚乙烯二氧噻吩(PEDOT)导电聚合物,研究了掺杂剂种类、聚合温度以及试剂比例对聚合速率及电导率的影响。研究结果表明:盐酸、冰醋酸及樟脑磺酸掺杂后能显著提高聚合物的电导率,其中樟脑磺酸掺杂后的电导率最高;质子酸掺杂和升高聚合温度可以明显加快聚合速率;当单体与氧化剂的摩尔比为1∶1时聚合物的电导率最高。 展开更多
关键词 化学氧化聚合 导电聚合物 聚乙烯二氧噻吩(pedot)
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部