Poly-L-Lysine玻片在寡核苷酸芯片制备中的改进

目的为了制得适合固定未修饰寡核苷酸的芯片,提高检测灵敏性,对Patrick Brown 实验室的多聚左旋赖氨酸包被玻片的方法进行改进。方法玻片经清洗后用缩水甘油-丙氧基三甲氧基硅烷进行硅烷化,然后应用Poly-L-Lysine在玻片表面形成聚合物涂层,经次亚苯基二异硫氰酸盐表面活化后可使寡核苷酸共价连接在芯片表面。设计了各种实验考察方法改进前后芯片表面的性能,并将改进后的玻片初步应用于SARS冠状病毒寡核苷酸芯片检测中。结果方法改进后芯片表面性能优良:固定效率高、点的同一性好、杂交效率和热稳定性好、寡核苷酸结合牢固、芯片可以重复利用。结论利用共价连接,方法改进后的芯片表面适合固定未修饰的寡核苷酸,解决了寡核苷酸与玻片之间物理结合不稳定、易剥离的缺陷,提高了芯片检测的灵敏性。

Electrochemical studies of chloroperoxidase on poly-L-lysine film modified GC electrode

Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC).The electrochemical behaviors of immobilized CPO on PLL/GC electrode were investigated by cyclic voltammetry(CV).The CV results obtained showed that CPO was successfully immobilized on the PLL/GC electrode and a fast direct electron transfer between CPO and PLL-GC electrod...

Glyco-poly-L-lysine is better than liposomal delivery of exogenous genes to rat liver

AIM To compare the effects of liposomes andglyco-poly-L-lysine on liver targeted uptake andexpression of plasmid in rat liver.METHODS After binding with lipofectamine orgalactose-terminal glyco-poly-L-lysine,theplasmid could be expressed in eukaryotic cellswhen injected into Wistar rats by intravenousroute.At different time intervals after the injection,the distribution and expression of the plasmid inliver of rats were observed and compared using insitu hybridization and immunohistochemistry.RESULTS The expression of the plasmid bindingto liposomes or G-PLL could be markedly observed24 h later,and began to decrease one week later,but it still could be observed up to three weeks.Both liposomes and G-PLL could deliver theplasmid to the liver effectively,but the effect of thelatter was better than the former concerning thedistribution and expression of the plasmid targeteduptake in the liver.CONCLUSION G-PLL is better than liposome asthe targeted carrier for delivering exogenous genesto the liver.

A comparison between intravenous and peritoneal route on liver targeted uptake and expression of plasmid delivered by Glyco-poly-L-lysine

AIM To compare the effects of intravenous routeand peritoneal route on liver targeted uptake andexpression of plasmid delivered by galactose-terminal glyco-poly-L-lysine(G-PLL).METHODS The plasmid pTM/MMP-1 which couldbe expressed in eukaryotic cells was bound to G-PLL,and was then transferred into Wistar rats byintravenous and intraperitoneal injection.Theexpression and distribution of the plasmid wereobserved at different time periods by in situhybridization and immunohistochemistry.RESULTS The plasmid could be expressedsignificantly within 24 h after being transferred invivo by both intravenous and intraperitonealroutes.One week later the expression began todecrease,and could still be observed three weekslater.Although both the intravenous andintraperitoneal route could target-specificallydeliver the plasmid to the liver,the effect of theformer was better as compared to that of the latter.CONCLUSION Intravenous route is better for livertargeted uptake and expression of G-PLL-boundplasmids than the peritoneal route.

Highly Efficient Labeling of Human Lung Cancer Cells Using Cationic Poly-L-lysine-Assisted Magnetic Iron Oxide Nanoparticles

Cell labeling with magnetic iron oxide nanoparticles(IONPs)is increasingly a routine approach in the cellbased cancer treatment.However,cell labeling with magnetic IONPs and their leading effects on the biological properties of human lung carcinoma cells remain scarcely reported.Therefore,in the present study the magnetic c-Fe2O3nanoparticles(MNPs)were firstly synthesized and surface-modified with cationic poly-L-lysine(PLL)to construct the PLL-MNPs,which were then used to magnetically label human A549 lung cancer cells.Cell viability and proliferation were evaluated with propidium iodide/fluorescein diacetate double staining and standard 3-(4,5-dimethylthiazol-2-diphenyl-tetrazolium)bromide assay,and the cytoskeleton was immunocytochemically stained.The cell cycle of the PLL-MNPlabeled A549 lung cancer cells was analyzed using flow cytometry.Apoptotic cells were fluorescently analyzed with nuclear-specific staining after the PLL-MNP labeling.The results showed that the constructed PLL-MNPs efficiently magnetically labeled A549 lung cancer cells and that,at low concentrations,labeling did not affect cellular viability,proliferation capability,cell cycle,and apoptosis.Furthermore,the cytoskeleton in the treated cells was detected intact in comparison with the untreated counterparts.However,the results also showed that at high concentration(400 lg m L-1),the PLL-MNPs would slightly impair cell viability,proliferation,cell cycle,and apoptosis and disrupt the cytoskeleton in the treated A549 lung cancer cells.Therefore,the present results indicated that the PLL-MNPs at adequate concentrations can be efficiently used for labeling A549 lung cancer cells and could be considered as a feasible approach for magnetic targeted anti-cancer drug/gene delivery,targeted diagnosis,and therapy in lung cancer treatment.

Synthesis and Antitumor Activity of Poly-L-Lysine Containing 5-Fluorouracil as Pendent Group

Homopolymers of L-amino acids such as poly(L-glutamic acid) and poly (Llysine) not only have good biocompatibility and biodegradability, but also lack of immunogenicity. It has been reported that homopoly(L-amino acids) were used as the carriers of antitumor drugs such as mustard, methotrexate (MTX), cyclophosphamide, daunomycin(DM) and adriamycin (ADR). 5-Fluorouracil(5-FU) is most useful for the treatment of patients with carcinoma of the breast and gastrointestinal

Characterization and separation of DNA complexes containing poly-L-lysine with or without the modification of PEG by capillary electrophoresis

The characterization of complexes is particularly critical for quality control and development of gene delivery systems. Here, the method of capillary zone electrophoresis （CZE） for the characterization of DNA and polyoL-lysine （MW 28 500） or DNA and poly-L-lysine modified with polyethylene glycol （MW10 000） complexes at various charge ratios in phosphate buffer is described firstly. During the characterization, DNA complexes can be separated into various components with different charge-to-mass ratio, i.e, components with single physicochemical property. And also the size and zeta potential of complexes were characterized by using photon correlation spectroscopy. This method is useful to characterize various complexes formed by DNA and polycations, and has the potential to separate complexes into homogeneous component for better transfection efficiency in vitro and in vivo in future.

Blood Compatibility of Amphiphilic Poly(N-α-acrylamide-L-lysine-<i>b</i>-dimethylsiloxane) Block Copolymers

Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.

Bioactivity of bioresorbable composite based on bioactive glass and poly-L-lactide

Bioactive and bioresorbable composite was fabricated by a solvent evaporation technique using poly-L-lactide(PLLA) and bioactive glass (average particle size: 6.8 μm). Bioactive glass granules are homogeneously distributed in the composite with microcrack structure. The formation of hydroxyapatite(HA) on the composite in simulated body fluid(SBF) was analyzed by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), X-ray diffraction(XRD), and Raman spectra. Rod-like HA crystals deposit on the surface of PLLA/bioactive glass composite after soaking for 3 d. Both rod-like crystals and HA layer form on the surface for 14 d in SBF. The high bioactivity of PLLA/bioactive glass composite indicates the potential of materials for integration with bone.

Poly(L-lactide)-Poly(ethylene glycol) Multiblock Copolymers: Synthesis and Properties

Poly (L-lactide)-poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as better miscibility between the two components, low crystallinity and better hydrophilicity, which can be modulated by adjusting the block lengths of the two components.

Effect of Sodium Alginate Concentration on Membrane Strength and Permeating Property of Poly-l-arginine Group Microcapsule

A novel poly-/-arginine microcapsule was prepared due to its nutritional function and pharmacological efficacy. A high-voltage electrostatic droplet generator was used to make uniform microcapsules. The results show that the membrane strength and permeating property are both remarkably affected with the changes of sodium alginate concentration. With the sodium alginate concentration increasing, gel beads sizes increase from 233μm to 350μm, release ratio is also higher at the same time, but the membrane strength decreases.

(ε⁃PL⁃TA)_(n)@纤维素/聚丙烯非织造材料的制备及其抗菌性能

为了赋予纤维素制品优异的抗菌性能,使其在医疗卫生领域有较好的应用前景,采用层层自组装(LBL)技术,将ε⁃聚赖氨酸(ε⁃PL)和单宁酸(TA)交替沉积在纤维素/聚丙烯复合水刺非织造材料上,制备了(ε⁃PL⁃TA)_(n)@纤维素/聚丙烯复合非织造材料,对其表面形貌、化学结构、孔隙、抗菌性能和力学性能进行了测试分析。结果表明:组装后(ε⁃PL⁃TA)_(n)@纤维素/聚丙烯材料表面出现一些凝胶状物质,ε⁃PL和TA的FTIR特征峰出现,成功负载到纤维素/聚丙烯材料上;组装后的(ε⁃PL⁃TA)n@纤维素/聚丙烯材料纤维之间的平均孔隙明显减小,纤维平均直径、单位面积质量、断裂强力、断裂伸长率均增加;随着组装层数的增加,(ε⁃PL⁃TA)_(n)@纤维素/聚丙烯材料的断裂强力和断裂伸长率先上升后下降;当组装层数为4.5时,(ε⁃PL⁃TA)4.5@纤维素/聚丙烯复合水刺非织造材料对大肠杆菌和金黄色葡萄球菌的抑菌率分别达到99.1%和99.9%。

Co-delivery of resveratrol and docetaxel via polymeric micelles to improve the treatment of drug-resistant tumors

Co-delivery of anti-cancer drugs is promising to improve the efficacy of cancer treatment.This study was aiming to investigate the potential of concurrent delivery of resveratrol(RES)and docetaxel(DTX)via polymeric nanocarriers to treat breast cancer.To this end,methoxyl poly(ethylene glycol)-poly(D,L-lactide)copolymer(mPEG-PDLA)was prepared and characterized using FTIR and 1H NMR,and their molecular weights were determined by GPC.Isobologram analysis and combination index calculation were performed to find the optimal ratio between RES and DTX to against human breast adenocarcinoma cell line(MCF-7 cells).Subsequently,RES and DTX were loaded in the mPEG-PDLA micelles simultaneously,and the morphology,particle size distribution,in vitro release,pharmacokinetic profiles,as well as cytotoxicity to the MCF-7 cells were characterized.IC50 of RES and DTX in MCF-7 cells were determined to be 23.0μg/ml and 10.4μg/ml,respectively,while a lower IC50 of 4.8μg/ml of the combination of RES and DTX was obtained.The combination of RES and DTX at a ratio of 1:1(w/w)generated stronger synergistic effect than other ratios in the MCF-7 cells.RES and DTX loaded mPEG-PDLA micelles exhibited prolonged release profiles,and enhanced cytotoxicity in vitro against MCF-7 cells.The AUC(0→t)of DTX and RES in mPEG-PDLA micelles after i.v.administration to rats were 3.0-fold and 1.6-fold higher than that of i.v.injections of the individual drugs.These findings indicated that the co-delivery of RES and DTX using mPEG-PDLA micelles could have better treatment of tumors.

Synthesis of the Biomimetic Polymer: Aliphatic Diamine and RGDS Modified Poly(d,l-lactic acid)

A novel poly（d, /-lactic acid） （PDLLA） based biomimetic polymer was synthesized by grafting maleic anhydride, butanediamine and arg-gly-asp-ser （RGDS） peptides onto the backbone of PDLLA, aiming to overcome the acidity and auto-accelerating degradation of PDLLA during degradation and to improve its biospecificity and biocompatibility. The synthetic copolymer was characterized by FTIR, ^13C NMR and amino acid analyzer （AAA）.

Microwave-assisted Polymerization of D,L-Lactide with Stannous Octanoate as Catalyst

Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.

NON-ISOTHERMAL CRYSTALLIZATION OF POLY(L-LACTIDE)(PLLA) UNDER QUIESCENT AND STEADY SHEAR CONDITIONS

The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide-angle X-ray diffraction （WAXD）. The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity. Under quiescent conditions, the morphology assumes different sized spherulites, and its crystallinity dramatically reduces with increasing the cooling rate. On the other hand, the shear flow increases the onset crystallization temperature, and enhances the final crystallinity. When the shear rate is above 5 s^-1, cylindrite-like crystals are observed, furthermore, their content depends on the cooling rate.

Synthesis and Characterization of Chitosan-g-poly- (D, L-lactic acid) Copolymer

Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.

Comparison of different cationic polymers efficacy in fabrication of alginate multilayer microcapsules

In past decades, alginate-based multilayer microcapsules have been given important attention in various pharmaceutical investigations. Alginate-poly l lysine-alginate(APA) is studied the most. Due to the similarity between the structure of polyethyleneimine(PEI) and poly-L-lysine(PLL) and also lower price of PEI than PLL, this study was conducted to compare the efficacy of linear(LPEI) and branch(BPEI) forms of PEI with PLL as covering layers in fabrication of microcapsules. The microcapsules were fabricated using electrostatic bead generator and their shape/size, surface roughness, mechanical strength, and interlayer interactions were also investigated using optical microscopy, AFM, explosion test and FTIR, respectively. Furthermore, cytotoxicity was evaluated by comparing the two anionic final covering layers alginate(Alg) and sodium cellulose sulphate(NCS) using MTT test. BPEI was excluded from the rest of the study due to its less capacity to strengthen the microcapsules and also the aggregation of the resultant alginate-BPEI-alginate microcapsules, while LPEI showed properties similar to PLL. MTT test also showed that NCS has no superiority over Alg as final covering layer. Therefore, it is concluded that, LPEI could be considered as a more cost effective alternative to PLL and a promising subject for future studies.

Different crystallinity of poly(d,l-lactide-co-p-dioxanone) copolymers acquired by control of chain microstructure

Poly（d,l-lactide-co-p-dioxanone） （P（LA-co-PDO）） copolymers with different chain microstructures were synthesized by onestep or two-step bulk ring-opening polymerizations of d,l-lactide （LA） and p-dioxanone （PDO） monomers using stannous octoate [Sn（Oct）2]/n-dodecanol as the initiating system. The average sequence lengths of the lactidyl （LLA） and dioxanyl （LpDo） units were calculated from the ^1H NMR spectra. It was found that both LLA and Lpoo values from the two-step syntheses were significantly longer than those from the corresponding one-step syntheses, indicating more blocky structure achieved for the twostep copolymers. Corresponding to this difference in microstructure, the two-step copolymers were semi-crystalline, while the one-step copolymers were completely amorphous. In conclusion, the crystallinity of P（LA-co-PDO） copolymers could be adjusted conveniently to meet specific applications by changing the microstructure of the copolymers via different polymerization routes.

Lanthanum(Ⅲ) sorption studies on poly[dibenzo-18-crown-6] and its separation from uranium(Ⅵ) and thorium(Ⅳ) in L-valine medium

The sorption study of La(Ⅲ) was carried out on poly[dibenzo-18-crown-6] and L-valine medium. The quantitative adsorption of La(Ⅲ) was found at 1×10-2 to 1×10-5 mol/L L-valine. The various eluting agents were found efficient eluents for La(Ⅲ). The capacity of crown polymer for La(Ⅲ) was found to be 0.43 ±0.01 mmol/g. The tolerance limit of various cations and anions for La(Ⅲ) was determined. La(Ⅲ) was quantitatively separated from other metal ions in binary as well as multicomponent mixtures. The study was extended to sequential separation of La(Ⅲ), U(VI) and Th(IV). The good separation yields were obtained and had good reproducibility (±2%). The method incorporated the determination of La(Ⅲ) in real sample. The method was simple, rapid and selective.