Sucrose ester( SE) was fixed on surface of poly( ethylene terephthalate)( PET) fibers to improve surface activity. Chitosan( CS) was used to graft onto pretreated PET fibers by sol-gel method. The transformations of s...Sucrose ester( SE) was fixed on surface of poly( ethylene terephthalate)( PET) fibers to improve surface activity. Chitosan( CS) was used to graft onto pretreated PET fibers by sol-gel method. The transformations of surface chemical structure,microcosmic morphology and thermodynamic property were investigated by Fourier transform infrared spectroscopy( FTIR),X-ray photoelectron spectroscopy( XPS), scanning electron microscope( SEM), X-ray diffraction technique( XRD), and thermo gravimetric analysis( TGA),respectively. The wettability and antistatic property of PET fiber were significantly improved after modification by SE and CS.展开更多
In order to develop a more economical pretreatment method for electroless nickel plating, a dielectric barrier discharge （DBD） plasma at atmospheric pressure was used to improve the hydrophilicity and adhesion of po...In order to develop a more economical pretreatment method for electroless nickel plating, a dielectric barrier discharge （DBD） plasma at atmospheric pressure was used to improve the hydrophilicity and adhesion of poly （ethylene terephthalate） （PET） nonwoven fabric. The properties of the PET nonwoven fabric including its liquid absorptive capacity （WA）, aging behavior, surface chemical composition, morphology of the surface, adhesion strength, surface electrical resistivity and electromagnetic interference （EMI）- shielding effectiveness （SE） were studied. The liquid absorptive capacity （WA） increased due to the incorporation of oxygen-containing and nitrogen-containing functional groups on the surface of PET nonwoven fabric after DBD airplasma treatment. The surface morphology of the nonwoven fibers became rougher after plasma treatment. Therefore, the surface was more prone to absorb tin sensitizer and palladium catalyst to form an active layer for the deposition of electroless nickel. SEM and X-ray diffraction （XRD） measurements indicated that a uniform coating of nickel was formed on the PET nonwoven fabric. The average EMI-SE of Ni-plating of PET nonwoven fabric maintained a relatively stable value （38.2 dB to 37.3 dB） in a frequency range of 50 MHz to 1500 MHz. It is concluded that DBD is feasible for pretreatment of nonwoven fabric for electroless nickel plating to prepare functional material with good EMI-SE properties.展开更多
The phase separation behavior of blend of Surlyn and poly(ethylene terephthalate) (PET) has been studied by scanning electron microscopy and IR. It is shown that particles of Surlyn are dispersed in PET matrix, and th...The phase separation behavior of blend of Surlyn and poly(ethylene terephthalate) (PET) has been studied by scanning electron microscopy and IR. It is shown that particles of Surlyn are dispersed in PET matrix, and this phase separation is controlled by heat-treated conditions of the blend.展开更多
In this study,hexachlorocyclotriphosphazene( HCCP)modified by boric acid and 3-aminopropyltriethoxysilane( KH-550)in solvent diglyme( FR-HCCP) was used as the flame retardant for poly( ethylene terephthalate)( PET) co...In this study,hexachlorocyclotriphosphazene( HCCP)modified by boric acid and 3-aminopropyltriethoxysilane( KH-550)in solvent diglyme( FR-HCCP) was used as the flame retardant for poly( ethylene terephthalate)( PET) composites. The flame retardancy and thermal property of pure PET and flame-retarded PET composites were mainly investigated. The flame retardancy was investigated by limited oxygen index( LOI) and UL-94 vertical burning test. The results showed that the composites could achieved an increased UL-94 V-0 rating and LOI value 30. 2, when the content of FR-HCCP was just 1%. The pyrolysis-gas chromatography-mass spectrometry( Py-GC / MS) study demonstrated that introducing FR-HCCP into PET would prevent the polymer pyrolysis during heating. TGA analysis showed that the addition of FR-HCCP could improve the char formation of the system. Roman spectra showed the order degree of residue was increasing by adding the additive. The morphology and the chemical structure of the charred residue were detected by SEMand FTIR,respectively. Results demonstrated that a good barrier was formed by the char of the composite,which protected the inside of the composite during burning.展开更多
Poly(ethylene terephthalate) (PET)/carbon black (CB) masterbatch was prepared by melt blending using a separate feeding technique and its homogeneous dispersion morphology was confirmed by transmission electron micros...Poly(ethylene terephthalate) (PET)/carbon black (CB) masterbatch was prepared by melt blending using a separate feeding technique and its homogeneous dispersion morphology was confirmed by transmission electron microscope (TEM). The Avrami and Hoffman-Lauritzen secondary nucleation theories were employed to analyze the effect of high CB content on crystallization kinetics of PET, providing theoretical support for the development of masterbatch with high content of functional components. The Avrami exponents,average values of n,for PET and PET/CB masterbatch are both greater than 3, which indicates three-dimensional growth of crystals. In addition,no significant evidence for regime transition of PET is found applying Hoffman-Lauritzen secondary nucleation theory,though such observations have been reported previously in the literature. Furthermore,appropriate U* value for PET is determined to be 12 800 J/mol. For PET/CB masterbatch,a transition from regime I to regime II around 225℃ is observed with appropriate U* value (12 800 J/mol) . This phenomenon is consistent with a transition point in plot of G versus Tc . The fold surface free energy σe (100. 3 mJ/m 2) of PET is much greater than that of PET/CB masterbatch (48. 3 mJ/m 2) ,which indicates heterogeneous nucleation effect of CB particles.展开更多
9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide( DOPO)-based flame retardant( DOPO-DOPC) which contains carbon source was used to improve the flame retardancy of poly( ethylene terephthalate)( PET) fabrics. The pr...9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide( DOPO)-based flame retardant( DOPO-DOPC) which contains carbon source was used to improve the flame retardancy of poly( ethylene terephthalate)( PET) fabrics. The prepared DOPODOPC dispersion was applied onto PET fabrics via two kinds of processes,thermosol process and exhaustion process,and in the later using it alone or together with disperse dyes. The flame retardancy of PET fabrics was determined by limiting oxygen index( LOI) and vertical burning test. The results showed that DOPODOPC could obviously improve the flame retardancy of PET fabrics.The PET fabric treated by 60 g/L DOPO-DOPC dispersion via exhaustion process achieved an LOI value of 32. 3%,for example.The flame retardancy and dyeing performances showed that DOPODOPC dispersion could be used together with a part of disperse dyes in one bath. The thermal stability of DOPO-DOPC and the treated PET fabrics were investigated by thermogravimetric analysis( TGA). And the flame retardant mechanism of DOPO-DOPC treated PET fabrics was further investigated by pyrolysis-gas chromatography/mass spectrometry( Py-GC/MS), Fourier transform infrared spectroscopy( FTIR) and scanning electron microscopy( SEM).展开更多
Polyethylene terephthalate （PET,Dacron） was modified by surface immobilization of hirudin with glutaraldehyde（GA） as coupling reagent to improve the blood compatibility.Hirudin-immobilized PETs were characterized ...Polyethylene terephthalate （PET,Dacron） was modified by surface immobilization of hirudin with glutaraldehyde（GA） as coupling reagent to improve the blood compatibility.Hirudin-immobilized PETs were characterized by X-ray photoelectron spectroscopy （XPS） and contact angle measurements.The blood compatibility of the PETs was evaluated by platelet adhesion evaluation and fibrinogen conformational change measurements in vitro.The results showed the decrease of platelet adhesion and activation on hirudin-immobilized PET with increasing of glutaraldehyde concentration.Fibrinogen experiment showed that fibrinogen adherence and conformational changes of PET-HRD were less than those of untreated PET,which made the materials difficult to form thrombus.The proper reason of blood compatibility improvement was low interface tension between hirudin-immobilized PETs and blood,as well as blood proteins,and low ratio of dispersive/polar component of the surface energy（γsd/γsp） and high hydrophilicity.展开更多
Poly(ethylene terephthalate)(PET)/tin fluorophosphate glass(Pglass) hybrids were prepared via melt blending in the present paper,and the phase morphology,dynamic rheology,crystallization behavior,dynamic and static me...Poly(ethylene terephthalate)(PET)/tin fluorophosphate glass(Pglass) hybrids were prepared via melt blending in the present paper,and the phase morphology,dynamic rheology,crystallization behavior,dynamic and static mechanical properties,and thermal stability of the hybrids have been investigated.Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) showed the Pglass particles well dispersed in the PET matrix within a nanoscale.The results showed that the addition of Pglass induced some advantages on the properties of PET matrix,such as the decreasing of melt viscosity,increasing the isothermal crystallization rate and crystallinity,and improving the storage modulus and elasticity modulus.展开更多
Conductive polymer composites based on crystalline polymer matrix have been prepared by using an in-situ polymerization process of pyrrole in amorphous poly （ethylene terephthalate） （PET） film. The DSC and WAXD me...Conductive polymer composites based on crystalline polymer matrix have been prepared by using an in-situ polymerization process of pyrrole in amorphous poly （ethylene terephthalate） （PET） film. The DSC and WAXD measurement and SEM observation show that liquid-induced crystallization of PET matrix has occurred during the preparation of composite films. Depending upon the equilibrium degree of swelling and crystallinity, the limited depth of penetration of pyrrole molecules results in a skin-core structure of the composite film. The skin layer containing charge transfer intercalated polypyrrole has a surface resistance of 3.5×10;Ω. Rigid and heat-resistant polypyrrole molecules formed in PET film increase the tensile modulus and, especially, the rigidity of PET at elevated temperatures. However, they decrease the tensile strength and elongation at break, and impair the thermal ductility of PET.展开更多
Annual production output of poly(ethylene terephthalate)(PET) fiber has been over 15 million tons in China due to its good mechanical properties and processability,but the shortage of hydrophilic group of PET has impo...Annual production output of poly(ethylene terephthalate)(PET) fiber has been over 15 million tons in China due to its good mechanical properties and processability,but the shortage of hydrophilic group of PET has imposed many limitations to further extend its application.The PET fabrics were grafted with polyacrylic acid in inverse microemulsion after low pressure plasma treatment,and the microstructure and properties of the grafted fabrics were investigated with infrared spectroscopy,scanning electron microscope(SEM),hydrophilic and mechanical tests.The grafting yield was increased with the grafting time.The grafting polymer was in the granular form with its particle size ranging from a few micrometers to a dozen of micrometers,normally smaller than the fiber diameter.The moisture regain and water uptake increased while the air permeability of the grafted fabrics decreased with the increase of grafting yield.The bending rigidity and tensile properties show slightly complicated behaviors with grafting yield.The inverse emulsion grafting technique can be used to control the grafting polymer architecture.展开更多
DSC, WAXD and POM were performed on the structures and morphology of a blend system being composed of PET, PEN and nucleating agent(DBS). It is concluded that the crystallization of the blends is dependent on the cont...DSC, WAXD and POM were performed on the structures and morphology of a blend system being composed of PET, PEN and nucleating agent(DBS). It is concluded that the crystallization of the blends is dependent on the contents of PET and the nuclenting agent, which affect the morphology of the blends. Under certain conditions, the blends show a complex extinction pattern, with the black cross extinction accompanying black homocentric zone and fireworks scattering form, rather than that of the common spherulite.展开更多
文摘Sucrose ester( SE) was fixed on surface of poly( ethylene terephthalate)( PET) fibers to improve surface activity. Chitosan( CS) was used to graft onto pretreated PET fibers by sol-gel method. The transformations of surface chemical structure,microcosmic morphology and thermodynamic property were investigated by Fourier transform infrared spectroscopy( FTIR),X-ray photoelectron spectroscopy( XPS), scanning electron microscope( SEM), X-ray diffraction technique( XRD), and thermo gravimetric analysis( TGA),respectively. The wettability and antistatic property of PET fiber were significantly improved after modification by SE and CS.
基金supported by National Natural Science Foundation of China (No.50833003)
文摘In order to develop a more economical pretreatment method for electroless nickel plating, a dielectric barrier discharge （DBD） plasma at atmospheric pressure was used to improve the hydrophilicity and adhesion of poly （ethylene terephthalate） （PET） nonwoven fabric. The properties of the PET nonwoven fabric including its liquid absorptive capacity （WA）, aging behavior, surface chemical composition, morphology of the surface, adhesion strength, surface electrical resistivity and electromagnetic interference （EMI）- shielding effectiveness （SE） were studied. The liquid absorptive capacity （WA） increased due to the incorporation of oxygen-containing and nitrogen-containing functional groups on the surface of PET nonwoven fabric after DBD airplasma treatment. The surface morphology of the nonwoven fibers became rougher after plasma treatment. Therefore, the surface was more prone to absorb tin sensitizer and palladium catalyst to form an active layer for the deposition of electroless nickel. SEM and X-ray diffraction （XRD） measurements indicated that a uniform coating of nickel was formed on the PET nonwoven fabric. The average EMI-SE of Ni-plating of PET nonwoven fabric maintained a relatively stable value （38.2 dB to 37.3 dB） in a frequency range of 50 MHz to 1500 MHz. It is concluded that DBD is feasible for pretreatment of nonwoven fabric for electroless nickel plating to prepare functional material with good EMI-SE properties.
文摘The phase separation behavior of blend of Surlyn and poly(ethylene terephthalate) (PET) has been studied by scanning electron microscopy and IR. It is shown that particles of Surlyn are dispersed in PET matrix, and this phase separation is controlled by heat-treated conditions of the blend.
文摘In this study,hexachlorocyclotriphosphazene( HCCP)modified by boric acid and 3-aminopropyltriethoxysilane( KH-550)in solvent diglyme( FR-HCCP) was used as the flame retardant for poly( ethylene terephthalate)( PET) composites. The flame retardancy and thermal property of pure PET and flame-retarded PET composites were mainly investigated. The flame retardancy was investigated by limited oxygen index( LOI) and UL-94 vertical burning test. The results showed that the composites could achieved an increased UL-94 V-0 rating and LOI value 30. 2, when the content of FR-HCCP was just 1%. The pyrolysis-gas chromatography-mass spectrometry( Py-GC / MS) study demonstrated that introducing FR-HCCP into PET would prevent the polymer pyrolysis during heating. TGA analysis showed that the addition of FR-HCCP could improve the char formation of the system. Roman spectra showed the order degree of residue was increasing by adding the additive. The morphology and the chemical structure of the charred residue were detected by SEMand FTIR,respectively. Results demonstrated that a good barrier was formed by the char of the composite,which protected the inside of the composite during burning.
文摘Poly(ethylene terephthalate) (PET)/carbon black (CB) masterbatch was prepared by melt blending using a separate feeding technique and its homogeneous dispersion morphology was confirmed by transmission electron microscope (TEM). The Avrami and Hoffman-Lauritzen secondary nucleation theories were employed to analyze the effect of high CB content on crystallization kinetics of PET, providing theoretical support for the development of masterbatch with high content of functional components. The Avrami exponents,average values of n,for PET and PET/CB masterbatch are both greater than 3, which indicates three-dimensional growth of crystals. In addition,no significant evidence for regime transition of PET is found applying Hoffman-Lauritzen secondary nucleation theory,though such observations have been reported previously in the literature. Furthermore,appropriate U* value for PET is determined to be 12 800 J/mol. For PET/CB masterbatch,a transition from regime I to regime II around 225℃ is observed with appropriate U* value (12 800 J/mol) . This phenomenon is consistent with a transition point in plot of G versus Tc . The fold surface free energy σe (100. 3 mJ/m 2) of PET is much greater than that of PET/CB masterbatch (48. 3 mJ/m 2) ,which indicates heterogeneous nucleation effect of CB particles.
基金National High Technology Research and Development Program 863 Project,China(No.2013AA06A307)
文摘9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide( DOPO)-based flame retardant( DOPO-DOPC) which contains carbon source was used to improve the flame retardancy of poly( ethylene terephthalate)( PET) fabrics. The prepared DOPODOPC dispersion was applied onto PET fabrics via two kinds of processes,thermosol process and exhaustion process,and in the later using it alone or together with disperse dyes. The flame retardancy of PET fabrics was determined by limiting oxygen index( LOI) and vertical burning test. The results showed that DOPODOPC could obviously improve the flame retardancy of PET fabrics.The PET fabric treated by 60 g/L DOPO-DOPC dispersion via exhaustion process achieved an LOI value of 32. 3%,for example.The flame retardancy and dyeing performances showed that DOPODOPC dispersion could be used together with a part of disperse dyes in one bath. The thermal stability of DOPO-DOPC and the treated PET fabrics were investigated by thermogravimetric analysis( TGA). And the flame retardant mechanism of DOPO-DOPC treated PET fabrics was further investigated by pyrolysis-gas chromatography/mass spectrometry( Py-GC/MS), Fourier transform infrared spectroscopy( FTIR) and scanning electron microscopy( SEM).
基金Funded by the National Natural Science Foundation of China(No.50203011)
文摘Polyethylene terephthalate （PET,Dacron） was modified by surface immobilization of hirudin with glutaraldehyde（GA） as coupling reagent to improve the blood compatibility.Hirudin-immobilized PETs were characterized by X-ray photoelectron spectroscopy （XPS） and contact angle measurements.The blood compatibility of the PETs was evaluated by platelet adhesion evaluation and fibrinogen conformational change measurements in vitro.The results showed the decrease of platelet adhesion and activation on hirudin-immobilized PET with increasing of glutaraldehyde concentration.Fibrinogen experiment showed that fibrinogen adherence and conformational changes of PET-HRD were less than those of untreated PET,which made the materials difficult to form thrombus.The proper reason of blood compatibility improvement was low interface tension between hirudin-immobilized PETs and blood,as well as blood proteins,and low ratio of dispersive/polar component of the surface energy（γsd/γsp） and high hydrophilicity.
文摘Poly(ethylene terephthalate)(PET)/tin fluorophosphate glass(Pglass) hybrids were prepared via melt blending in the present paper,and the phase morphology,dynamic rheology,crystallization behavior,dynamic and static mechanical properties,and thermal stability of the hybrids have been investigated.Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) showed the Pglass particles well dispersed in the PET matrix within a nanoscale.The results showed that the addition of Pglass induced some advantages on the properties of PET matrix,such as the decreasing of melt viscosity,increasing the isothermal crystallization rate and crystallinity,and improving the storage modulus and elasticity modulus.
文摘Conductive polymer composites based on crystalline polymer matrix have been prepared by using an in-situ polymerization process of pyrrole in amorphous poly （ethylene terephthalate） （PET） film. The DSC and WAXD measurement and SEM observation show that liquid-induced crystallization of PET matrix has occurred during the preparation of composite films. Depending upon the equilibrium degree of swelling and crystallinity, the limited depth of penetration of pyrrole molecules results in a skin-core structure of the composite film. The skin layer containing charge transfer intercalated polypyrrole has a surface resistance of 3.5×10;Ω. Rigid and heat-resistant polypyrrole molecules formed in PET film increase the tensile modulus and, especially, the rigidity of PET at elevated temperatures. However, they decrease the tensile strength and elongation at break, and impair the thermal ductility of PET.
基金the First Phase of Jiangsu Universities' Distinctive Discipline Development Program for Textile Science and Engineering of Soochow University,China
文摘Annual production output of poly(ethylene terephthalate)(PET) fiber has been over 15 million tons in China due to its good mechanical properties and processability,but the shortage of hydrophilic group of PET has imposed many limitations to further extend its application.The PET fabrics were grafted with polyacrylic acid in inverse microemulsion after low pressure plasma treatment,and the microstructure and properties of the grafted fabrics were investigated with infrared spectroscopy,scanning electron microscope(SEM),hydrophilic and mechanical tests.The grafting yield was increased with the grafting time.The grafting polymer was in the granular form with its particle size ranging from a few micrometers to a dozen of micrometers,normally smaller than the fiber diameter.The moisture regain and water uptake increased while the air permeability of the grafted fabrics decreased with the increase of grafting yield.The bending rigidity and tensile properties show slightly complicated behaviors with grafting yield.The inverse emulsion grafting technique can be used to control the grafting polymer architecture.
文摘DSC, WAXD and POM were performed on the structures and morphology of a blend system being composed of PET, PEN and nucleating agent(DBS). It is concluded that the crystallization of the blends is dependent on the contents of PET and the nuclenting agent, which affect the morphology of the blends. Under certain conditions, the blends show a complex extinction pattern, with the black cross extinction accompanying black homocentric zone and fireworks scattering form, rather than that of the common spherulite.
