The colored poly(m-phenylene isophthalamide)(PMIA)spinning solution was prepared by wet spinning and the die-swell of the colored PMIA spinning solution was done when it was extruded from a die in this experiment.The ...The colored poly(m-phenylene isophthalamide)(PMIA)spinning solution was prepared by wet spinning and the die-swell of the colored PMIA spinning solution was done when it was extruded from a die in this experiment.The properties and structures of colored PMIA fibers were characterized by scanning electron microscopy(SEM).The colored PMIA spinning dopes were first commixed in a pressurizer and then spun into a coagulation bath.The effect of die swell on the colored PMIA solution was resulted from the viscoelastic properties of the colored PMIA solution in the spinning process.The results showed that the die-swell ratio of the colored PMIA solution increased linearly with increasing the pressure and die length/diameter ratio(L/D).At the same pressure and L/D,the die-swell ratio decreased with the increase of filter layers and temperature.Also,optimized spinning parameters of the dopedyed PMIA fiber were obtained.展开更多
The feasibility of employing nanofiltration for the removal of chromium（VI） from wastewater was investigated. Poly （m-phenylene isophthalamide） （PMIA） was used to fabricate asymmetric nanofiltration membrane thr...The feasibility of employing nanofiltration for the removal of chromium（VI） from wastewater was investigated. Poly （m-phenylene isophthalamide） （PMIA） was used to fabricate asymmetric nanofiltration membrane through the phase-inversion technique. Scanning electron microscopy （SEM） and atomic force microscopy （AFM） were used to characterize the obtained membrane, and the both confirmed a much smoother surface which could reduce membrane fouling. The PMIA membrane showed different rejections to electrolytes in a sequence of Na2SO4 〉 MgSO4 〉 NaC1 〉 MgC12, which was similar to the sequence of the negatively charged nanofiltration membranes. Separation experiments on chromium（VI） solution were conducted at various operating conditions, such as feed concentration, applied pressure and pH. It is concluded that chromium（VI） could be effectively removed from chromiumcontaining wastewater by the PMIA nanofiltration membranes while maintaining their pollution resistance under alkaline condition.展开更多
Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with flexibility,easy processability,low cost and especially strong ability to dissolve lithium salts have been regarded as promising alternatives to tradi...Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with flexibility,easy processability,low cost and especially strong ability to dissolve lithium salts have been regarded as promising alternatives to traditional flammable liquid electrolytes in next-generation highsafety and high-energy-density lithium metal batteries.However,the inferior mechanical strength and thermostability of PEO-based SPEs will raise the lithium dendritic penetration issue,further leading to the short circuit in batteries.In this work,aiming at enhancing the interfacial stability against Li dendrites of PEO-based SPEs,poly(mphenylene isophthalamide)(PMIA)is introduced as a reinforcing phase for the rational design of PEO/PMIA composite electrolyte.Impressively,PMIA chain with meta-type benzene-amide linkages significantly improves the mechanical strength(1.60 MPa),thermal stability(260℃)and ability to inhibit the growth of lithium dendrites(>300 h at 0.1 mA·cm^(-2))of SPEs.Meanwhile,allsolid-state LiFePO_(4)‖PEO/PMlA‖Li cell demonstrates superior electrochemical performance in terms of high specific capacity(159.1 mAh·g^(-1)),remarkable capacity retention(82.2%after 200 cycles at 0.5 C)and excellent safety characteristics.No burning or explosion occurs under pressing,bending and cutting conditions.This work opens a new door in developing high-performance PEObased electrolytes for advanced all-solid-state lithium metal batteries.展开更多
Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion condu...Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion conductance and poor mechanical and thermal properties.Herein,poly(m-phenylene isophthalamide)(PMIA)is employed as a multifunctional additive to improve the overall properties of the PEO-based electrolytes.The hydrogen-bond interactions between PMIA and PEO/TFSI-can effectively prevent the PEO crystallization and meanwhile facilitate the LiTFSI dissociation,and thus greatly improve the ionic conductivity(two times that of the pristine electrolyte at room temperature).With the incorporation of the high-strength PMIA with tough amide-benzene backbones,the PMIA/PEO-LiTFSI composite polymer electrolyte(CPE)membranes also show much higher mechanical strength(2.96 MPa),thermostability(4190℃)and interfacial stability against Li dendrites(468 h at 0.10 mA cm-2)than the pristine electrolyte(0.32 MPa,364℃and short circuit after 246 h).Furthermore,the CPE-based LiFePO4/Li cells exhibit superior cycling stability(137 mAh g^-1 with 93%retention after 100 cycles at 0.5 C)and rate performance(123 mAh g^-1 at 1.0 C).This work provides a novel and effective CPE structure design strategy to achieve comprehensively-upgraded electrolytes for promising solid-state battery applications.展开更多
In this paper,the efect of poly(ethylene oxide)(PEO)as an additive on the structure and properties of poly(m-phenylene dimethylene terephthalamide)(PMIA)fbers obtained by wet spinning was investigated.The tensile stre...In this paper,the efect of poly(ethylene oxide)(PEO)as an additive on the structure and properties of poly(m-phenylene dimethylene terephthalamide)(PMIA)fbers obtained by wet spinning was investigated.The tensile strength of the composite fbers was substantially enhanced compared to the pure PMIA fber.This was due to the fact that the addition of PEO weakens the hydrogen bonding between PMIA molecular chains resulting in an improved orientation of the composite fbers.It was found that the optimum PEO addition was 2%and the tensile strength of the composite fber was 4.74 cN/dtex,which was 76%higher compared to the pure PMIA fber.However,the heat resistance and fame retardancy of the composite fbers were basically unchanged compared to the pure PMIA fber.The modifcation method is simple,with low raw material cost and good stability,and has not only good academic value but also excellent industrial value.展开更多
文摘The colored poly(m-phenylene isophthalamide)(PMIA)spinning solution was prepared by wet spinning and the die-swell of the colored PMIA spinning solution was done when it was extruded from a die in this experiment.The properties and structures of colored PMIA fibers were characterized by scanning electron microscopy(SEM).The colored PMIA spinning dopes were first commixed in a pressurizer and then spun into a coagulation bath.The effect of die swell on the colored PMIA solution was resulted from the viscoelastic properties of the colored PMIA solution in the spinning process.The results showed that the die-swell ratio of the colored PMIA solution increased linearly with increasing the pressure and die length/diameter ratio(L/D).At the same pressure and L/D,the die-swell ratio decreased with the increase of filter layers and temperature.Also,optimized spinning parameters of the dopedyed PMIA fiber were obtained.
基金supported by the High Technology Research and Development Program (863) of China(No. 2007AA06Z339)the National Key Technologies R&D Program of China (No. 2006BAD01B02-02,2006BAJ08B00)
文摘The feasibility of employing nanofiltration for the removal of chromium（VI） from wastewater was investigated. Poly （m-phenylene isophthalamide） （PMIA） was used to fabricate asymmetric nanofiltration membrane through the phase-inversion technique. Scanning electron microscopy （SEM） and atomic force microscopy （AFM） were used to characterize the obtained membrane, and the both confirmed a much smoother surface which could reduce membrane fouling. The PMIA membrane showed different rejections to electrolytes in a sequence of Na2SO4 〉 MgSO4 〉 NaC1 〉 MgC12, which was similar to the sequence of the negatively charged nanofiltration membranes. Separation experiments on chromium（VI） solution were conducted at various operating conditions, such as feed concentration, applied pressure and pH. It is concluded that chromium（VI） could be effectively removed from chromiumcontaining wastewater by the PMIA nanofiltration membranes while maintaining their pollution resistance under alkaline condition.
基金financially supported by the Natural Science Foundation of Zhejiang Province(Nos.LY21E020005,2022C01173 and LD22E020006)China Postdoctoral Science Foundation(Nos.2020M671785 and 2020T130597)+1 种基金the National Natural Science Foundation of China(Nos.U20A20253,51777194,21972127 and 21905249)Zhejiang Provincial Special Support Program for High-level Talents(No.2020R51004)。
文摘Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with flexibility,easy processability,low cost and especially strong ability to dissolve lithium salts have been regarded as promising alternatives to traditional flammable liquid electrolytes in next-generation highsafety and high-energy-density lithium metal batteries.However,the inferior mechanical strength and thermostability of PEO-based SPEs will raise the lithium dendritic penetration issue,further leading to the short circuit in batteries.In this work,aiming at enhancing the interfacial stability against Li dendrites of PEO-based SPEs,poly(mphenylene isophthalamide)(PMIA)is introduced as a reinforcing phase for the rational design of PEO/PMIA composite electrolyte.Impressively,PMIA chain with meta-type benzene-amide linkages significantly improves the mechanical strength(1.60 MPa),thermal stability(260℃)and ability to inhibit the growth of lithium dendrites(>300 h at 0.1 mA·cm^(-2))of SPEs.Meanwhile,allsolid-state LiFePO_(4)‖PEO/PMlA‖Li cell demonstrates superior electrochemical performance in terms of high specific capacity(159.1 mAh·g^(-1)),remarkable capacity retention(82.2%after 200 cycles at 0.5 C)and excellent safety characteristics.No burning or explosion occurs under pressing,bending and cutting conditions.This work opens a new door in developing high-performance PEObased electrolytes for advanced all-solid-state lithium metal batteries.
基金supported partially by Natural Science Foundation of Beijing Municipality(L172036)Joint Funds of the Equipment Pre-Research and Ministry of Education(6141A020225)+3 种基金Par-Eu Scholars Program,Science and Technology Beijing 100 Leading Talent Training ProjectChina Postdoctoral Science Foundation(2018M631419)Fundamental Research Funds for Central Universities(2017ZZD02,2019QN001)NCEPU“Double First-Class”Graduate Talent Cultivation Program。
文摘Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion conductance and poor mechanical and thermal properties.Herein,poly(m-phenylene isophthalamide)(PMIA)is employed as a multifunctional additive to improve the overall properties of the PEO-based electrolytes.The hydrogen-bond interactions between PMIA and PEO/TFSI-can effectively prevent the PEO crystallization and meanwhile facilitate the LiTFSI dissociation,and thus greatly improve the ionic conductivity(two times that of the pristine electrolyte at room temperature).With the incorporation of the high-strength PMIA with tough amide-benzene backbones,the PMIA/PEO-LiTFSI composite polymer electrolyte(CPE)membranes also show much higher mechanical strength(2.96 MPa),thermostability(4190℃)and interfacial stability against Li dendrites(468 h at 0.10 mA cm-2)than the pristine electrolyte(0.32 MPa,364℃and short circuit after 246 h).Furthermore,the CPE-based LiFePO4/Li cells exhibit superior cycling stability(137 mAh g^-1 with 93%retention after 100 cycles at 0.5 C)and rate performance(123 mAh g^-1 at 1.0 C).This work provides a novel and effective CPE structure design strategy to achieve comprehensively-upgraded electrolytes for promising solid-state battery applications.
基金This work was supported by the National Natural Science Foundation of China(No.51473031).
文摘In this paper,the efect of poly(ethylene oxide)(PEO)as an additive on the structure and properties of poly(m-phenylene dimethylene terephthalamide)(PMIA)fbers obtained by wet spinning was investigated.The tensile strength of the composite fbers was substantially enhanced compared to the pure PMIA fber.This was due to the fact that the addition of PEO weakens the hydrogen bonding between PMIA molecular chains resulting in an improved orientation of the composite fbers.It was found that the optimum PEO addition was 2%and the tensile strength of the composite fber was 4.74 cN/dtex,which was 76%higher compared to the pure PMIA fber.However,the heat resistance and fame retardancy of the composite fbers were basically unchanged compared to the pure PMIA fber.The modifcation method is simple,with low raw material cost and good stability,and has not only good academic value but also excellent industrial value.
