Effects of Processing Variables on the Morphology and Diameter of Electrospun Poly(amino acid ester)phosphazene Nanofibers

Poly[（alanino ethyl ester）0.67 （glycino ethyl ester）0.33 phosphazene] （PAGP） was synthesized, and morphology and diameter of the electrospun PAGP nanofibers were systematically evaluated by using a cool field emission scanning electron microscope （SEM） with changing the important processing variables such as applied voltage, polymeric concentration, and ambient temperature. The average diameter of PAGP nanofibers was inversely proportional to the applied voltage, but increased with the increase of solution concentration. Lower environmental temperature was unfavorable due to the nanofibers conglutination.

Apoptosis of A549 cells by small interfering RNA targeting survivin delivery using poly-β-amino ester/guanidinylated O-carboxymethyl chitosan nanoparticles

Gene-based therapeutics has emerged as a promising approach for human cancer therapy. Among a variety of non-viral vectors, polymer vectors are particularly attractive due to their safety and multivalent groups on their surface. This study focuses on guanidinylated O-carboxymethyl chitosan(GOCMCS) along with poly-β-amino ester(PBAE) for si RNA delivery. Binding efficiency of PBAE/si RNA/GOCMCS nanoparticles were characterized by gel electrophoresis. The si RNA-loaded nanoparticles were found to be stable in the presence of RNase A, serum and BALF respectively. Fine particle fraction(FPF) which was determined by a two-stage impinger(TSI) was 57.8% ± 2.6%. The particle size and zeta potential of the nanoparticles were 153.8 ± 12.54 nm and + 12.2 ± 4.94 m V. In vitro cell transfection studies were carried out with A549 cells. The cellular uptake was significantly increased. When the cells were incubated with si Survivin-loaded nanoparticles, it could induce 26.83% ± 0.59% apoptosis of A549 cells and the gene silencing level of survivin expression in A549 cells were 30.93% ± 2.27%. The results suggested that PBAE/GOCMCS nanoparticle was a very promising gene delivery carrier.

Effect of Hyperbranched Poly(amine-ester) Grafted Nano-SiO_2 on Reinforcement and Toughness of PVC

Nano-SiO2 was modified using silane coupling agent （KH-550） and hyperbranched poly（amine-ester） respectively, and Poly（vinyl chloride） （PVC）/modified nano-SiO2 composites were made by melt-blending. The composites＇ structures andmechanical properties were characterized by transmission electron microscopy（TEM）, sanning electronic microscopy（SEM） and electronic universal testing machine. The results. show that nano-SiO2 grafted by hyperbranched poly （amine-ester） increases obviously in dispersion in PVC matrix, and mechanical properties of PVC are effectively improved. Moreover, it was found that mechanical properties of PVC/nano-SiO2 composites reach the best when weight percent of nano-SiO2 in PVC matrix is 1%. Compared with crude PVC, the tensile strength of hyperbranched poly （amine-ester） grafted nano-SiO2/ PVC composite increases by 24.68 % and its break elongation, flexural strength and impact strength increase by 15.73%, 4.07% and 1 841.84%, respectively. Moreover, the processing of the composites is improved.

New Phase Transfer Agent for Dye: Application for Hyperbranched Poly (ester-amine)

Hydrophilic hyperbranched poly(ester-amine) (HPEA) synthesized from diethanolamine and methyl acrylate was used as phase transfer agent for the first time to transfer methyl orange (MO) from water into chloroform. This process was quantified by UV-Vis spectra. A possible mechanism was put forward based on the formation of amphiphilic aggregates.

SYNTHESIS AND CHARACTERIZATION OF HYPERBRANCHED POLY(ESTER-AMIDE)S BASED ON GALLIC ACID AND DL-2-AMINOBUTYRIC ACID

A novel AB3-type monomer was prepared from gallic acid and DL-2-aminobutyric acid, and used for the synthesis of the biocompatible hyperbranched poly(ester-amide)s by self-polycondensation. The polymers were characterized via FTIR and NMR spectroscopy and thermal analysis, and the average degree of branching of the polymers was estimated to be 0.75. The polymers with abundant acetyl end groups were found to be amorphous with lower intrinsic viscosity, better thermal stability and excellent solubility.

Hyperbranched Poly(amide-ester) Mildly Synthesized and Its Characterization

AB2-type-prepolymerized monomer was rapidly （2 h） prepared at room temperature （25 ℃） using commercially available maleic anhydride （MA） and diethanolamine （DEA） as raw materials. By employing toluene-p-sulfonic acid as a catalyzer, a series of hyperbranched poly（amide-ester） （HBPAE） were successfully synthesized from prepared AB2 monomer by solution condensation polymerization through ＂one-step process＂ or ＂pseudo one-step process＂ （using pentaerythritol as a center core）. The processes were carried out at high temperature of 120 ℃ for 6 h in air atmosphere （inert protection free） with reduced pressure distillation （0.08--0.096 MPa）. The results of FT-IR, UV-Vis, TGA, and intrinsic viscosity testing by Ubbelodhe viscometer showed that the prepared HBPAEs possess three-dimensional configuration with unsaturated conjugate structure, large numbers of branches and numerous terminal hydroxyl groups. These result in their low viscosity, high solubility and thermal stability.

Facile Route to Aromatic Hyperbranched Poly(ester amines)

The aromatic hyperbranched poly（ester amines）（AHPEAs） were successfully synthesized via the mild condensation of N-4-cyanobenzyl diethanolamine hydrogenchloride as an AB2 monomer in concentrated HCI. The polymerization was monitored by FTIR to suppose the reasonable reaction mechanism. The degree of branching was determined to be 0.55 by 1H NMR with an increased conversion of up to 96%. The glass transition temperature was measured by differential scanning calorimetry to range from -19 to 15℃ The molecular weights and polydispersities were investigated by gel permeation chromatography.

SYNTHESIS, CHARACTERIZATION OF CHIRAL POLY(ESTER AMIDE)S DERIVED FROM L-ISOLEUCINE

A series of new optically active aromatic poly(ester amide)s containing a chiral group in the side chain prepared from the p-toluenesulfonic acid salt of o,o'-bis(leucyl)-hexanediol (TS-+LHD+TS-) and p-phthaloyl chloride and styrene-2,5- dicarbonyl chloride styrene have been synthesized by interfacial polymerization. The structure of the monomer is elucidated by FT-IR and elemental analysis. The thermal properties of the polymers were studied by DSC and TGA. The chiroptical properties of the above polymer have also been studied by circular dichroism (CD) spectroscopy. Results indicated that these polymers form helical structures.

Synthesis and Properties of Thermoplastic Polyisocyanurates:Polyisocyanuratoamide,Polyisocyanurato(Ester-Amide)and Polyisocyanurato(Urea-Ester)

It has been proved that introducing isocyanurate into polymer chains could improve the flame retardancy of polymers.We describe in this work the synthesis and the thermal property study of three thermoplastic polyisocyanurates,which are polyisocyanuratoamide(PICA-6),polyisocyanurato(ester amide)(PICEA-6)and polyisocyanurato(urea ester)(PICUE-6).These polymers show similar and improved thermal stability with the existence of isocyanurate rings.PICA-6 is more crystalizable than the rest two and the melting temperature is found to be around 240℃ but it still crystalizes slowly.For PICEA-6 and PICUE-6,only glass transition can be observed on the DSC traces.The glass transition temperature follows the order of PICA-6>PICEA-6>PICUE-6(101.9,77.9 and 28.7℃,respectively).

Synthesis of New Ointment-like Poly(ortho esters)

Ointment-like poly(ortho esters) were synthesized from the reaction of 3,9-bis (methylene)-2,4,8,10-tetraoxaspiro[5.5]undecane with PEG-400,N,N-bis(2-hydroxyethyl)-n-hexadecylamine and N,N-bis(2-hydroxyethyl) palmitamide respectively. The influence of the catalyst on the intrinsic viscosity of polymers was also studied.

Effect of Silyl Moiety on the Reaction of O,O'-Phenylenephosphoryl Chloride with N-Silylvaline Silyl Ester

N-Trimethylsilylvaline trimethylsilyl ester IIa, N-triethylsilylvaline triethylsilyl ester IIb and N-tert-butyldimethylsilylvaline tert-butyldimethylester IIc showed evidently different reactivities with O,O'-phenylenephosphorylchloride The formation speed of the fmal spiro-bicyclic pentacoordinated phosphorus compounds IV depends on the intramolecular transfer ability of the silyl moiety crucially

In Vitro Antimicrobial Activity Study of Some New Arginine-based Biodegradable Poly （Ester Urethane）s and Poly （Ester Urea）s

Bactericidal activity of some arginine based biodegradable polymers-PEURs （poly （ester urethane）s） and PEUs （poly （ester urea）s） with low cytotoxicity was studied in in vitro experiments. Various bacterial strains both Gram-positive and Gram-negative were used to explore the bactericidal activity of the cationic polymers. As the test objects, the following microorganisms were used： Bacillus subtilis, Staphylococcus aureus, Mycobacterium album, Pseudomonas fluorescens, Escherichia coli, Actinomyces griseus and Aspergillus niger. The obtained results showed that the new cationic polymers suppressed the growth of the studied microorganisms and the bactericidal activity of the tested cationic polymers strongly depending on their chemical structure.

Synthesis and Characterization of Poly(azomethine ester)s with a Pendent Dimethoxy Benzylidene Group

Recently, soluble poly(azomethine ester)s with good thermal stability and liquid crystalline properties are much sought after in opto-electronic field. One such attempt was to synthesize poly(azomethine ester)s with a pendent group. In this study, the newly synthesized diacid monomer benzalaniline 3’-4’dimethoxy terepthalic acid was condensed with two diol monomers to get the polymers with pendent benzylidene group. The diacid monomer was characterized by UV, IR, NMR and CHNS analysis. The polymers were characterized by IR, TGA, and for liquid crystalline property. Polymer-I showed the highest thermal stability upto 335°C. Polymer-II exhibited liquid crystalline nature along with good solubility and thermal stability.

Preparation and Characterization of Poly(β-Amino Ester) Capsules for Slow Release of Bioactive Material

Network structures from poly(β-amino ester) (PAE) were synthesized for applying as drug delivery matrix via a simplified addition polymerization method. It can hold an active organic compound (drug) that has an effect as antitumor activity in order to control its release. PAE was prepared from piperazine and 1,4-butandiol diacrylate with different molar ratios. The active compound was mixed with the prepared polymer while warming for 15 minutes to obtain the capsule product. The resulting polymer structures and the surface morphology of the PAE capsules before and after encapsulation with the active drug were characterized by FT-IR and SEM, respectively. Swelling and degradation behavior of PAE were studied. The characterization showed that the obtained network structure of PAE depends on the molar ratio between the reactants. The optimum ratio of the reactants was found to be 1:1. Therefore, stable and white product as well as good holding capability for drug produced. The SEM studies illustrate good dispersion and holding properties of the drug into the network structure of the prepared polymer. In vitro, the release results of the drug from the PAE capsules indicated that the capsules were able to give sustained release of drug in DMF up to 10 days at 25°C.

Synthesis and Characterization of Thermoplastic Poly(Ester Amide)s Elastomer (TPEaE) Obtained from Recycled PET

A series of thermoplastic polyester elastomer (TPEE) and thermoplastic poly(ester amide)s elastomer (TPEaE)copolymers were obtained by depolymerizing PET (polyethylene terephthalate) by which the waste PET canbe efficiently recovered and recycled into value-added products from a practical and economical point of view.The structure of TPEE and TPEaE was identified using nuclear magnetic resonance (NMR) and Fourier transforminfrared spectroscopy (FT-IR). Differential scanning calorimetry (DSC) data showed that the melting temperature(Tm) decreased with the amide content increased. The glass transition temperature (Tg) was increased as introducingthe amide group, and the formation of amide-ester and amide-amide hydrogen bonds increased the intermolecularchain force. The intrinsic viscosity (η) showed the tendency of increment from TPEE (0.53 dL g^(−1)) to TPEaE-5%(0.72 dL g^(−1)) due to the reinforcement of hydrogen bond and chain entanglement.

Studies on interacting Blends of Acrylated Epoxy resin based Poly(Ester-Amide)s and Vinyl EsterResin

Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).

NOVEL HYPERBRANCHED POLY(AMINE-ESTER) FILMS: PREPARATION, CHARACTERIZATION AND PROPERTIES

Crosslinked film of hyperbranched poly（amine-ester） （HPAE） was prepared by crosslinking its terminal hydroxyl groups with glutaraldehyde （GA）. Atom force microscope （AFM） and scanning electron microscope （SEM） reveals that they have smooth surfaces, dense and homogenous matrices. It was found that the water static contact angle is smaller than 41.7°, the tensile strength is higher than 8.9 MPa, the elongation at break is higher than 5.1%, the swelling degree is higher than 42% in water, and the Bovine hemoglobin （Hb） adsorption is relatively low. These results indicate that the crosslinked HPAE films might have some potential applications in many areas.

Synthesis and Properties of Lactic Acid-based Cross-linked Poly(ester-amide)

A novel lactic acid-based cross-linked poly（ester-amide） （LCPEA） was synthesized. The gel fraction of the LCPEA could be modulated by the reaction conditions and it affected the mechanical and thermal properties of the LCPEA. The tensile strength, elastic modulus and bend strength of the LCPEA of 65% gel fraction were 4.65, 136.55 and 39.63 MPa, respectively. The thermal decomposition temperature （50 wt%） of the LCPEA was around 410℃.

INFLUENCE OF MOLECULAR STRUCTURES OF SECONDARY AMINE TERMINATED POLY(ESTER-AMINE)S ON THE CURING PERFORMANCE WITH EPOXY RESIN

Five secondary amine terminated poly（ester-amine）s （defined as PEA） with controlled molecular structures were synthesized through reacting excessive piperazine with phthalicdiglycol diacrylate （PDDA） and 1,1,1-trimethylolpropane triacrylate （TMPTA） at a constant secondary amine/acrylate group ratio of 1.5/1 and at different PDDA/TMPTA molar ratios. Both IR and ^1H-NMR spectra indicated that all acrylate groups were consumed in the reaction, based on which the structural parameters were calculated from the ^1H-NMR spectra. With decreasing PDDA/TMPTA ratio, the content of secondary amine, degree of branching, molecular weight, Tg and Td increased accordingly. These polymers were further used as both crosslinkers and flexibilizers for a linear epoxy resin E51 to form cured films under ambient condition. The gel content, relative hardness and Tg of the resulting films increased as PEA molecules changed from linear to highly branching structures. Due to the flexibility of PEA molecules, all the films possessed excellent mechanical performance.

Synthesis of Bis(4'-hydroxyphenyl)-toluene-2, 4-diurethane for Main Chain Liquid Crystalline Poly(urethane-ester)s

A new methodology was advanced that mesogenic cores appeared after theformation of urethane groups and during the monomer-to-polymer transition. A newdiphenol monomer, bis(4'-hydroxy-phenyl)-toluene-2 (BHPTU), was obtainedby the reaction of 2,4-tolulene diisocyanate with hydroquinone in dioxane or N,N-dimethyl-acetandde. The reaction process was monitored by FTIR, and the product was investigated bylH NMR and elemental analysis (EA). A liquid crystalline poly(urethane-ester) was obtainedusing the BHPTU monomer.