Optimization of L-lactic Acid Production of Rhizopus Oryzae Mutant RLC41-6 by Ion Beam Implantation at Low-Energy

In order to obtain an industrial strain with a higher L（＋）-lactic acid yield, the strain Rhizopus oryzae RF3608 was mutated by means of nitrogen ion beam implantation and the mutant strain RLC41-6 was isolated. Under optimal conditions the yield of L（＋）-lactic acid produced in a shake-flask reached 133 g/L - 137 g/L after 36 h cultivation, indicating that the conversion rate based on glucose was as high as 88% - 91% and the productivity was 3.75 g/L.h. It was almost a 115% increase in lactic acid production compared with the original strain RF3608.

Optimization of L(+)-Lactic Acid Production from Xylose with Rhizopus Oryzae Mutant RLC41-6 Breeding by Low-Energy Ion Implantation

In order to obtain an industrial strain with a higher L（＋）-lactic acid yield, the strain Rhizopus oryzae PW352 was mutated by means of nitrogen ion beam implantation and the mutant strain Rhizopus oryzae RLC41-6 was obtained. An experimental finding was made in surprise that Rhizopus oryzae mutant RLC41-6 is not only an L（＋）-lactic acid producer from corn starch but also an efficient producer of L（＋）-lactic acid from xylose. Under optimal conditions, the production of L（＋）-lactic acid from 100 g/L xylose reached 77.39 g/L after 144 h fed-batch fermentation, A high mutation rate and a wide mutation spectrum of low-energy ion implantation were observed in the experiment.

Improvement of L(+)-Lactic Acid Production of Rhizopus Oryzae by Low-Energy Ions and Analysis of Its Mechanism

The wild type strain Rhizopus oryzae PW352 was mutated by means of nitrogen ion implantation （15 keV, 7.8×10^14 ～ 2.08 ×10^15 ions/cm^2） to find an industrial strain with a higher L（＋）-lactic acid yield, and two mutants RE3303 and RF9052 were isolated. In order to discuss the mechanism primarily, Lactate Dehydrogenase of Rhizopus oryzae was studied. While the two mutants produced L（＋）-lactic acid by 75% more than the wild strain did, their specific activity of Lactate Dehydrogenase was found to be higher than that in the wild strain. The optimum temperature of Lactate Dehydrogenase in Rhizopus oryzae RF9052 was higher. Compared to the wild strain, the Michaelis constant （Km） value of Lactate Dehydrogenase in the mutants was Changed. All these changes show that L（＋）-lactic acid production has a correlation with the specific activity of Lactate Dehydrogenase. The low-energy ions, implanted into the strain, may improve the specific activity of Lactate Dehydrogenase by influencing its gene structure and protein structure.

Optimization of L(+)-Lactic Acid Fermentation Without Neutralisation of Rhizopus Oryzae Mutant RK02 by Low-Energy Ion Implantation

In order to get an industrial strain which can yield a high concentration of lactic acid for ISPR （in situ product removal）, the original strain Rhizopus oryzae RE3303 was mutated by low-energy ion beam implantation. A mutant RK02 was screened, and the factors such as the substrate concentration, nitrogen source concentration, inoculum size, seed age, aeration and temperature that affect the production of lactic acid were studied in detail. Under optimal con- ditions, the maximum concentration of L（＋）-lactic acid reached 34.85 g/L after 30 h shake-flask cultivation without adding any neutralisation （5% Glucose added）, which was a 146% increase in lactic acid production after ion implantation compared with the original strain. It was also shown that RK02 can be used in ISPR to reduce the number of times of separation.

Immobilization of Lactobacillus rhamnosus TISTR108 on Crude Pectin of Krung Kha Mao Leaves （Cissampe/os pareira L.） to Produce Lactic Acid in Longan Juice

L-（＋）-lactic acid production was studied by immobilized Lactobacillus rhamnosus T1STR108 on crude pectin from Krung Kha Mao Leaves. Central composite design was employed to determine the maximum lactic acid production of 42.88 g L-1 in predicted model with the factors at 4.11 g L1 of pectin, 6.05 mLLl inoculum and 1.09 mm of bead diameter. Statistical analyses demonstrated very high significance for the regression model, since the F-value computed 116.09 was much higher than the tabulated F-value 2.08 for the lactic acid production at 5% level for linear and quadratic polynomial regression models. The highest experimental lactic acid production was 43.57 g L^-1 at 96 h of fermentation, 1.58% higher than the predicted value.