MXene,a transition metal carbide/nitride,has been prominent as an ideal electrochemical active material for supercapacitors.However,the low MXene load limits its practical applications.As environmental concerns and su...MXene,a transition metal carbide/nitride,has been prominent as an ideal electrochemical active material for supercapacitors.However,the low MXene load limits its practical applications.As environmental concerns and sustainable development become more widely recognized,it is necessary to explore a greener and cleaner technology to recycle textile by-products such as cotton.The present study proposes an effective 3D fabrication method that uses MXene to fabricate waste denim felt into ultralight and flexible supercapacitors through needling and carbonization.The 3D structure provided more sites for loading MXene onto Z-directional fiber bundles,resulting in more efficient ion exchange between the electrolyte and electrodes.Furthermore,the carbonization process removed the specific adverse groups in MXenes,further improving the specific capacitance,energy density,power density and electrical conductivity of supercapacitors.The electrodes achieve a maximum specific capacitance of 1748.5 mF cm-2 and demonstrate remarkable cycling stability maintaining more than 94%after 15,000 galvanostatic charge/discharge cycles.Besides,the obtained supercapacitors present a maximum specific capacitance of 577.5 mF cm^(-2),energy density of 80.2μWh cm^(-2)and power density of 3 mW cm^(-2),respectively.The resulting supercapacitors can be used to develop smart wearable power devices such as smartwatches,laying the foundation for a novel strategy of utilizing waste cotton in a high-quality manner.展开更多
Electro-oxidation of Ce （ Ⅲ ） to Ce （ Ⅳ ） in parallel plate flow type electrolyzer divided with cation exchange membrane was carried out in nitric acid media at carbon felt anode under galvanostatic conditions. ...Electro-oxidation of Ce （ Ⅲ ） to Ce （ Ⅳ ） in parallel plate flow type electrolyzer divided with cation exchange membrane was carried out in nitric acid media at carbon felt anode under galvanostatic conditions. Carbon felt was used as an anode for its high specific surface area and high oxygen evolution overpotential. Pt coated Ti plates were used as cathode and anode current feeder. The oxidation of 1 mol· L^-1 Ce（ Ⅲ ） solution in 2 mol· L^- 1 HNO3 was proceeding with a high current efficiency （92%） until about 80% of Ce（ Ⅲ ） was oxidized. Then, oxygen evolution, accompanied by terminal voltage jump, took place, lowering current efficiency. Ce（ Ⅲ ） was oxidized up to 90% with current efficiency of 62%. In this mode, strong carbon felt anode oxidation was observed. The wear out of carbon felt was 46% in six consequent runs （6 h of operation）. After each run, carbon felt surface had to be renewed with slightly alkaline solution to remove carbon oxidation products and ensure regular operational conditions. When anode surface was blocked, oxygen evolution took place from the beginning of electrolysis due to higher actual current density. The wear out of carbon felt anode could be minimized by means of oxygen evolution prevention. In the case when electrolysis had been stopped before oxygen evolution started （at Ce（ Ⅳ ） conversion of about 80% ）, the wear out of anode was less than 2% during 6 consequent runs （4 h of operation）.展开更多
Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells (MFCs). Nitrogen doping is an effective way for the modification of traditional carb...Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells (MFCs). Nitrogen doping is an effective way for the modification of traditional carbon materials. In this work, heat treatment and melamine were used to modify carbon felts to enhance electrogenesis capacity of MFCs. The modified carbon felts were characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscopy (AFM) and malvern zeta potentiometer. Results show that the maximum power densities under heat treatment increase from 276.1 to 423.4 mW/m(2) (700 degrees C) and 461.5 mW/m(2) (1200 degrees C) and further increase to 472.5 mW/m(2) (700 degrees C) and 515.4 mW/m(2) (1200 degrees C) with the co-carbonization modification of melamine. The heat treatment reduces the material resistivity, improves the zeta potential which is beneficial to microbial adsorption and electron transfer. The addition of melamine leads to the higher content of surface pyridinic and quaternary nitrogen and higher zeta potential. It is related to higher MFCs performance. Generally, the melamine modification at high temperature increases the feasibility of carbon felt as MFCs's anode materials. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.展开更多
Vanadium redox flow batteries(VRFBs)are one of the most promising energy storage systems owing to their safety,efficiency,flexibility and scalability.However,the commercial viability of VRFBs is still hindered by the ...Vanadium redox flow batteries(VRFBs)are one of the most promising energy storage systems owing to their safety,efficiency,flexibility and scalability.However,the commercial viability of VRFBs is still hindered by the low electrochemical performance of the available carbon-based electrodes.Defect engineering is a powerful strategy to enhance the redox catalytic activity of carbon-based electrodes for VRFBs.In this paper,uniform carbon defects are introduced on the surfaces of carbon felt(CF)electrode by Ar plasma etching.Together with a higher specific surface area,the Ar plasma treated CF offers additional catalytic sites,allowing faster and more reversible oxidation/reduction reactions of vanadium ions.As a result,the VRFB using plasma treated electrode shows a power density of 1018.3 mW/cm^(2),an energy efficiency(EE)of 84.5%,and the EE remains stable over 1000 cycles.展开更多
Prussian blue (PB) modified carbon felt electrodes were prepared. The electrochemical behavior was investigated by cyclic voltammetry, electrochemical impedance spectroscopy and charge-discharge experiments. In order ...Prussian blue (PB) modified carbon felt electrodes were prepared. The electrochemical behavior was investigated by cyclic voltammetry, electrochemical impedance spectroscopy and charge-discharge experiments. In order to distinguish the mechanism of the PB modified carbon felt electrode, the electrochemical quartz crystal microbalance (EQCM) was employed. The results of cyclic voltammetry show that the modification can improve the reversibility and the suitable PB deposition is the amount of 10 circles deposition. PB modified carbon felt electrode can effectively decrease the charge transfer resistance. The voltage efficiency of VRB employing PB modified carbon felt electrode can be increased by 12%. The mass change of the PB modified Pt crystal electrode in the process of the potential scan is obvious. The reaction of substitution of VO2+ for high-spin Fe ion in PB is probable to happen and the possible reaction equation is given. The preliminary exploration shows that PB modified carbon felt is electrochemically promising for redox flow battery.展开更多
A LiBr/LiOH non-eutectic mixture shows a potentially outstanding heat energy density of 800 J/g at a constant temperature,which makes it a very promising candidate for heat storage applications around 300℃.However,sa...A LiBr/LiOH non-eutectic mixture shows a potentially outstanding heat energy density of 800 J/g at a constant temperature,which makes it a very promising candidate for heat storage applications around 300℃.However,salt-based phase change materials are known for their too low thermal conductivity which can question the thermal storage systems effective feasibility.The objective here is to infiltrate a carbon felt of high porosity(>93%)with the LiBr/LiOH mixture to anticipate this deficiency.The device has to be adapted according to the properties and the characteristics of the studied storage and host materials.The developed procedure for the carbon felt infiltration with the synthesized binary system is presented.The optimised working conditions allow(1)minimizing the interaction time duration between the quartz tube and the salt-based mixture and,(2)verifying the good chemical compatibility of the mixture with the host matrix after infiltration.展开更多
Fabricating of high performance electrodes by a sustainable and cost effective method is essential to the development of vanadium redox flow batteries(VRFBs).In this work,an effective strategy is proposed to deposit c...Fabricating of high performance electrodes by a sustainable and cost effective method is essential to the development of vanadium redox flow batteries(VRFBs).In this work,an effective strategy is proposed to deposit carbon nanoparticles on graphite felts by hydrothermal carbonization method.This in-situ method minimizes the drop off and aggregation of carbon nanoparticles during electrochemical testing.Such integration of felts and hydrothermal carbons(HTC)produces a new electrode that combines the outstanding electrical conductivity of felts with the effective redox active sites provided by the HTC coating layer.The presence of the amorphous carbon layers on the felts is found to be able to promote the mass/charge transfer,and create oxygenated/nitrogenated active sites and hence enhances wettability.Consequently,the most optimized electrode based on a rational approach delivers an impressive electrochemical performance toward VRFBs in wide range of current densities from 200 to 500 mAcm^-2.The voltage efficiency(VE)of GFs-HTC is much higher than the VEs of the pristine GFs,especially at high current densities.It exhibits a 4.18 times increase in discharge capacity over the pristine graphite felt respectively,at a high current density of 400 mAcm^-2.The enhanced performance is attributed to the abundant active sites from amorphous hydrothermal carbon,which facilitates the fast electrochemical kinetics of vanadium redox reactions.This work evidences that the glucose-derived hydrothermal carbons as energy storage booster hold great promise in practical VRFBs application.展开更多
The activated carbon fiber（ACF） was prepared from polyacrylonitrile-based pre-oxidized fiber（PANOF） by KOH direct activation. The influence of activation conditions including impregnation ratio（the mass ratio of ...The activated carbon fiber（ACF） was prepared from polyacrylonitrile-based pre-oxidized fiber（PANOF） by KOH direct activation. The influence of activation conditions including impregnation ratio（the mass ratio of PANOF to KOH）, activation temperature and activation time on the pore structure and electrochemical properties of ACF was investigated, and the corresponding activation mechanism was proposed. The ACF prepared at an activation temperature of 800℃ and an impregnation ratio（the mass ratio of PANOF to KOH） of 1：2 for an activation time of 1 b in 6 mol/L KOH solution exhibits a specific surface area of 3029 m^2/g, a mesoporosity of 84.2% and a specific capacitance of 288 F/g, and shows a good capacitive performance. The prepared ACF can be used as the electrode material for supercapacitors.展开更多
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(Nos.52073224,32201491)the Textile Vision Basic Research Program of China(No.J202110)+3 种基金the Scientific Research Project of Shaanxi Provincial Education Department,China(No.22JC035)the Advanced Manufacturing Technology Program of Xi’an Science and Technology Bureau,China(No.21XJZZ0019)the Research Fund for the Doctoral Program of Xi’an Polytechnic University(No.BS202053)the Youth Innovation Team of Shaanxi Universities and Institute of Flexible electronics and Intelligent Textile.
文摘MXene,a transition metal carbide/nitride,has been prominent as an ideal electrochemical active material for supercapacitors.However,the low MXene load limits its practical applications.As environmental concerns and sustainable development become more widely recognized,it is necessary to explore a greener and cleaner technology to recycle textile by-products such as cotton.The present study proposes an effective 3D fabrication method that uses MXene to fabricate waste denim felt into ultralight and flexible supercapacitors through needling and carbonization.The 3D structure provided more sites for loading MXene onto Z-directional fiber bundles,resulting in more efficient ion exchange between the electrolyte and electrodes.Furthermore,the carbonization process removed the specific adverse groups in MXenes,further improving the specific capacitance,energy density,power density and electrical conductivity of supercapacitors.The electrodes achieve a maximum specific capacitance of 1748.5 mF cm-2 and demonstrate remarkable cycling stability maintaining more than 94%after 15,000 galvanostatic charge/discharge cycles.Besides,the obtained supercapacitors present a maximum specific capacitance of 577.5 mF cm^(-2),energy density of 80.2μWh cm^(-2)and power density of 3 mW cm^(-2),respectively.The resulting supercapacitors can be used to develop smart wearable power devices such as smartwatches,laying the foundation for a novel strategy of utilizing waste cotton in a high-quality manner.
文摘Electro-oxidation of Ce （ Ⅲ ） to Ce （ Ⅳ ） in parallel plate flow type electrolyzer divided with cation exchange membrane was carried out in nitric acid media at carbon felt anode under galvanostatic conditions. Carbon felt was used as an anode for its high specific surface area and high oxygen evolution overpotential. Pt coated Ti plates were used as cathode and anode current feeder. The oxidation of 1 mol· L^-1 Ce（ Ⅲ ） solution in 2 mol· L^- 1 HNO3 was proceeding with a high current efficiency （92%） until about 80% of Ce（ Ⅲ ） was oxidized. Then, oxygen evolution, accompanied by terminal voltage jump, took place, lowering current efficiency. Ce（ Ⅲ ） was oxidized up to 90% with current efficiency of 62%. In this mode, strong carbon felt anode oxidation was observed. The wear out of carbon felt was 46% in six consequent runs （6 h of operation）. After each run, carbon felt surface had to be renewed with slightly alkaline solution to remove carbon oxidation products and ensure regular operational conditions. When anode surface was blocked, oxygen evolution took place from the beginning of electrolysis due to higher actual current density. The wear out of carbon felt anode could be minimized by means of oxygen evolution prevention. In the case when electrolysis had been stopped before oxygen evolution started （at Ce（ Ⅳ ） conversion of about 80% ）, the wear out of anode was less than 2% during 6 consequent runs （4 h of operation）.
文摘Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells (MFCs). Nitrogen doping is an effective way for the modification of traditional carbon materials. In this work, heat treatment and melamine were used to modify carbon felts to enhance electrogenesis capacity of MFCs. The modified carbon felts were characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscopy (AFM) and malvern zeta potentiometer. Results show that the maximum power densities under heat treatment increase from 276.1 to 423.4 mW/m(2) (700 degrees C) and 461.5 mW/m(2) (1200 degrees C) and further increase to 472.5 mW/m(2) (700 degrees C) and 515.4 mW/m(2) (1200 degrees C) with the co-carbonization modification of melamine. The heat treatment reduces the material resistivity, improves the zeta potential which is beneficial to microbial adsorption and electron transfer. The addition of melamine leads to the higher content of surface pyridinic and quaternary nitrogen and higher zeta potential. It is related to higher MFCs performance. Generally, the melamine modification at high temperature increases the feasibility of carbon felt as MFCs's anode materials. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
基金Project(Xiang Zu [2016] 91) supported by the “100 Talented Teams” of Hunan Province,ChinaProject(2018RS3077) supported by the Huxiang High-level Talents Program,China+2 种基金Project(22002009) supported by the National Natural Science Foundation of ChinaProject(2021JJ40565) supported by the Natural Science Foundation of Hunan Province,ChinaProject(19C0054) supported by the Scientific Research Foundation of Hunan Provincial Education Department,China。
文摘Vanadium redox flow batteries(VRFBs)are one of the most promising energy storage systems owing to their safety,efficiency,flexibility and scalability.However,the commercial viability of VRFBs is still hindered by the low electrochemical performance of the available carbon-based electrodes.Defect engineering is a powerful strategy to enhance the redox catalytic activity of carbon-based electrodes for VRFBs.In this paper,uniform carbon defects are introduced on the surfaces of carbon felt(CF)electrode by Ar plasma etching.Together with a higher specific surface area,the Ar plasma treated CF offers additional catalytic sites,allowing faster and more reversible oxidation/reduction reactions of vanadium ions.As a result,the VRFB using plasma treated electrode shows a power density of 1018.3 mW/cm^(2),an energy efficiency(EE)of 84.5%,and the EE remains stable over 1000 cycles.
基金Project (2008ZX07313-005) supported by the National Water Pollution Control and Management of Major Special Science and Technology Foundation
文摘Prussian blue (PB) modified carbon felt electrodes were prepared. The electrochemical behavior was investigated by cyclic voltammetry, electrochemical impedance spectroscopy and charge-discharge experiments. In order to distinguish the mechanism of the PB modified carbon felt electrode, the electrochemical quartz crystal microbalance (EQCM) was employed. The results of cyclic voltammetry show that the modification can improve the reversibility and the suitable PB deposition is the amount of 10 circles deposition. PB modified carbon felt electrode can effectively decrease the charge transfer resistance. The voltage efficiency of VRB employing PB modified carbon felt electrode can be increased by 12%. The mass change of the PB modified Pt crystal electrode in the process of the potential scan is obvious. The reaction of substitution of VO2+ for high-spin Fe ion in PB is probable to happen and the possible reaction equation is given. The preliminary exploration shows that PB modified carbon felt is electrochemically promising for redox flow battery.
文摘A LiBr/LiOH non-eutectic mixture shows a potentially outstanding heat energy density of 800 J/g at a constant temperature,which makes it a very promising candidate for heat storage applications around 300℃.However,salt-based phase change materials are known for their too low thermal conductivity which can question the thermal storage systems effective feasibility.The objective here is to infiltrate a carbon felt of high porosity(>93%)with the LiBr/LiOH mixture to anticipate this deficiency.The device has to be adapted according to the properties and the characteristics of the studied storage and host materials.The developed procedure for the carbon felt infiltration with the synthesized binary system is presented.The optimised working conditions allow(1)minimizing the interaction time duration between the quartz tube and the salt-based mixture and,(2)verifying the good chemical compatibility of the mixture with the host matrix after infiltration.
基金supported by the Award Program for Fujian Minjiang Scholar Professorshipthe National Natural Science Foundation of China(21571035)。
文摘Fabricating of high performance electrodes by a sustainable and cost effective method is essential to the development of vanadium redox flow batteries(VRFBs).In this work,an effective strategy is proposed to deposit carbon nanoparticles on graphite felts by hydrothermal carbonization method.This in-situ method minimizes the drop off and aggregation of carbon nanoparticles during electrochemical testing.Such integration of felts and hydrothermal carbons(HTC)produces a new electrode that combines the outstanding electrical conductivity of felts with the effective redox active sites provided by the HTC coating layer.The presence of the amorphous carbon layers on the felts is found to be able to promote the mass/charge transfer,and create oxygenated/nitrogenated active sites and hence enhances wettability.Consequently,the most optimized electrode based on a rational approach delivers an impressive electrochemical performance toward VRFBs in wide range of current densities from 200 to 500 mAcm^-2.The voltage efficiency(VE)of GFs-HTC is much higher than the VEs of the pristine GFs,especially at high current densities.It exhibits a 4.18 times increase in discharge capacity over the pristine graphite felt respectively,at a high current density of 400 mAcm^-2.The enhanced performance is attributed to the abundant active sites from amorphous hydrothermal carbon,which facilitates the fast electrochemical kinetics of vanadium redox reactions.This work evidences that the glucose-derived hydrothermal carbons as energy storage booster hold great promise in practical VRFBs application.
基金Supported by the National Natural Science Foundation of China（No.21273097） and the Key Project of Jilin Province, China（No.20126010）.
文摘The activated carbon fiber（ACF） was prepared from polyacrylonitrile-based pre-oxidized fiber（PANOF） by KOH direct activation. The influence of activation conditions including impregnation ratio（the mass ratio of PANOF to KOH）, activation temperature and activation time on the pore structure and electrochemical properties of ACF was investigated, and the corresponding activation mechanism was proposed. The ACF prepared at an activation temperature of 800℃ and an impregnation ratio（the mass ratio of PANOF to KOH） of 1：2 for an activation time of 1 b in 6 mol/L KOH solution exhibits a specific surface area of 3029 m^2/g, a mesoporosity of 84.2% and a specific capacitance of 288 F/g, and shows a good capacitive performance. The prepared ACF can be used as the electrode material for supercapacitors.
