为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒...为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。展开更多
In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form po...In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form polycarbonate part. But the wall thickness distribution of the bulged specimen by this method is not so even.展开更多
Blends of PC and PPSQ (A) with high M-w and good ladderlike regularity or PPSQ(B) with low M-w and more defective Si-atoms in its structure have been prepared by solution casting. The dispersed spheres (PPSQ(A)-rich) ...Blends of PC and PPSQ (A) with high M-w and good ladderlike regularity or PPSQ(B) with low M-w and more defective Si-atoms in its structure have been prepared by solution casting. The dispersed spheres (PPSQ(A)-rich) are unevenly dispersed in the continuous PC-rich phase and there is no phase-inversion as PPSQ(A) content increases when the percentage of PPSQ(A) is not more than 70%. PPSQ(B)-rich spheres are evenly dispersed in the continuous phase (PC-rich) and phase-inversion occurs when PPSQ(B) percentage is up to 70%. T-g of PPSQ(A)/PC or PPSQ(B)/PC at some compositions are lower than that of pure PC due to the enlarged free-volume of PC-rich phase because some spheres of rigid PPSQ chains are included in the PC-rich phase. PC and PPSQ(A) or PPSQ(B) are partially compatible. The compatibility of PC and PPSQ(B) is better than that of PC and PPSQ(A) with high M-w and good ladderlike regularity. Heat history has some influence on the T(g)s and compatibility of PPSQ(A)/PC and PPSQ(B)/PC blends.展开更多
文摘为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。
文摘In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form polycarbonate part. But the wall thickness distribution of the bulged specimen by this method is not so even.
基金This work was supported by Fund of Head of College of Chemistry,Shandong University.
文摘Blends of PC and PPSQ (A) with high M-w and good ladderlike regularity or PPSQ(B) with low M-w and more defective Si-atoms in its structure have been prepared by solution casting. The dispersed spheres (PPSQ(A)-rich) are unevenly dispersed in the continuous PC-rich phase and there is no phase-inversion as PPSQ(A) content increases when the percentage of PPSQ(A) is not more than 70%. PPSQ(B)-rich spheres are evenly dispersed in the continuous phase (PC-rich) and phase-inversion occurs when PPSQ(B) percentage is up to 70%. T-g of PPSQ(A)/PC or PPSQ(B)/PC at some compositions are lower than that of pure PC due to the enlarged free-volume of PC-rich phase because some spheres of rigid PPSQ chains are included in the PC-rich phase. PC and PPSQ(A) or PPSQ(B) are partially compatible. The compatibility of PC and PPSQ(B) is better than that of PC and PPSQ(A) with high M-w and good ladderlike regularity. Heat history has some influence on the T(g)s and compatibility of PPSQ(A)/PC and PPSQ(B)/PC blends.
