Phenolic hydroxyl-terminated polysiloxanes were incorporated into epoxy resins to reduce the internal stress owing to the mismatch in coefficient of thermal expansion (CTE). Polysiloxane-epoxy resin block copolymers w...Phenolic hydroxyl-terminated polysiloxanes were incorporated into epoxy resins to reduce the internal stress owing to the mismatch in coefficient of thermal expansion (CTE). Polysiloxane-epoxy resin block copolymers were made by a pre-reaction step prior to the curing. In the cured resin, the domain size of the polysiloxane phase depended on the structure of the phenolic hydroxyl-terminated polysiloxane. It was found that the modulus of the cured resin depended largely on the level of the modifier, while the CTE was affected greatly by the structure of the polysiloxane. By means of incorporating a few percent of methylphenylsiloxane unit into the polydimethylsiloxane chain, or by introducing; more compatible end-capping groups, the compounds of more effective low stress modifiers were synthesized.展开更多
Polysiloxane-modified epoxy resins were prepared through the reaction of epoxy resin with polydimethylsiloxanes bearing pendant N-(beta-aminoethyl)-gamma-aminopropyl groups. The morphology and properties of the cured ...Polysiloxane-modified epoxy resins were prepared through the reaction of epoxy resin with polydimethylsiloxanes bearing pendant N-(beta-aminoethyl)-gamma-aminopropyl groups. The morphology and properties of the cured epoxy resins modified by the polysiloxanes were investigated. It was found that the phase structure and properties of the cured epoxy resins depend mainly on the amino group content in the polydimethylsiloxane and the level of the modifier. The change of phase structure in the cured epoxy resin systems was responsible for the dramatic change in their mechanical and surface properties.展开更多
The toughening of the diglycidyl ether of bisphenol A epoxy resin with isocyanateterminated polyethers （ITPE） was investigated. The progress of the reaction and the structural changes during modification process wer...The toughening of the diglycidyl ether of bisphenol A epoxy resin with isocyanateterminated polyethers （ITPE） was investigated. The progress of the reaction and the structural changes during modification process were studied using FTIR spectroscopy. The studies support the proposition that TDI （tolylene diisocyanate） acts as a coupling agent between the epoxy and polyethers, forming a urethane linkage with the former and the latter, respectively. Me THPA-cured ER/ITPs blends were characterized using dynamic mechanical analysis （DMA） and thermogravimetric analysis （TGA）. It is indicated the glass transition temperature （T） of systems was lower than the T of pure epoxy resin and overfull ITPE separated from the modified epoxy resin and formed another phase at an ITPE-content of more than 10wt%. The thermal stability was decreased by the introduction of ITPE. The impact strength and the flexural strength of the cured modifiedepoxy increased with increasing the ITPE content and a maximum plateau value of about 24.03 kJ/m^2 and 130.56 MPa was measured in 10wt% ITPE. From scanning electron microscopy （SEM） studies of the fractrue surfaces of ER/ITPE systems, the nature of the micromechanisms responsible for the increases in toughness of the systems was identified.展开更多
Polysiloxane bearing pendant quaternary ammonium groups (PSI) was used to modify the surface properties of epoxy resins. In the cured resin, PSI formed the dispersed phase. Remarkable enrichment and gradient distribut...Polysiloxane bearing pendant quaternary ammonium groups (PSI) was used to modify the surface properties of epoxy resins. In the cured resin, PSI formed the dispersed phase. Remarkable enrichment and gradient distribution of polysiloxane on the surface region of the epoxy resins were demonstrated by XPS analysis. The composition and properties of the surface of PSI-modified epoxy resin, which is in contact with the mold, are dependent on the material of the mold. Through the incorporation. of PSI, epoxy resins with low surface energy and low friction coefficient were obtained. Polysiloxane with lower ionic group content shows a higher degree of enrichment on the resin surface and leads to a higher contact angle against water, while the polysiloxane having optimum compatibility with the epoxy resin shows a greater effect in reducing the static friction coefficient of the resin against glass.展开更多
Amino-terminated polyethers and amino-terminated polyurethane were used as curing agent to cure the epoxy resin together and get a series of cured products. The damping properties of the composites were studied by DMA...Amino-terminated polyethers and amino-terminated polyurethane were used as curing agent to cure the epoxy resin together and get a series of cured products. The damping properties of the composites were studied by DMA test at different measurement frequencies. Damping mechanical tests show that the flexible epoxy resin has higher loss factor than common epoxy. The highest loss factor reaches 1.57. Also the height and position of loss factor peak of the flexible epoxy resin varies by changing the content of amino-terminated polyethers. Results shows that the flexible epoxy resin can be used as damping polymer materials at room temperature or in common frequency range.展开更多
A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly...A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.展开更多
A novel liquid hyperbranched polyether epoxy （HBPEE） based on commercially available hydroquinone （HQ） and 1,1,1-trihydroxymethylpropane triglycidyl ether （TMPGE） was synthesized through an A2 ＋ B3 one-step pro...A novel liquid hyperbranched polyether epoxy （HBPEE） based on commercially available hydroquinone （HQ） and 1,1,1-trihydroxymethylpropane triglycidyl ether （TMPGE） was synthesized through an A2 ＋ B3 one-step proton transfer polymerization. In order to improve the toughness, the synthesized HBPEE was mixed with diglycidyl ether of bisphenol A （DGEBA） in different ratios to form hybrids and cured with triethylenetetramine （TETA）. Thermal and mechanical properties of the cured hybrids were evaluated. Results show that addition of HBPEE can improve the toughness of cured hybrids remarkably at 〈 20 wt% loading, without compromising the tensile strength. However, the glass transition temperature （Tg） of the cured hybrids decreases with increasing HBPEE content. Fracture surface images from scanning electron microscope show oriented fibrils in hybrids containing HBPEE. The formation and orientation of the fibrils can absorb energy under impact and lead to an improvement of toughness. Furthermore, based on the morphology of fractured surfaces and the single Tg in each hybrid, no sign of phase separation was found in the cured hybrid systems. As a result, the toughening mechanism could be explained by in situ homogeneous toughening mechanism rather than phase separation mechanism.展开更多
文摘Phenolic hydroxyl-terminated polysiloxanes were incorporated into epoxy resins to reduce the internal stress owing to the mismatch in coefficient of thermal expansion (CTE). Polysiloxane-epoxy resin block copolymers were made by a pre-reaction step prior to the curing. In the cured resin, the domain size of the polysiloxane phase depended on the structure of the phenolic hydroxyl-terminated polysiloxane. It was found that the modulus of the cured resin depended largely on the level of the modifier, while the CTE was affected greatly by the structure of the polysiloxane. By means of incorporating a few percent of methylphenylsiloxane unit into the polydimethylsiloxane chain, or by introducing; more compatible end-capping groups, the compounds of more effective low stress modifiers were synthesized.
文摘Polysiloxane-modified epoxy resins were prepared through the reaction of epoxy resin with polydimethylsiloxanes bearing pendant N-(beta-aminoethyl)-gamma-aminopropyl groups. The morphology and properties of the cured epoxy resins modified by the polysiloxanes were investigated. It was found that the phase structure and properties of the cured epoxy resins depend mainly on the amino group content in the polydimethylsiloxane and the level of the modifier. The change of phase structure in the cured epoxy resin systems was responsible for the dramatic change in their mechanical and surface properties.
基金the Natural Science Foundation of Hubei Province (No.2006ABA321)
文摘The toughening of the diglycidyl ether of bisphenol A epoxy resin with isocyanateterminated polyethers （ITPE） was investigated. The progress of the reaction and the structural changes during modification process were studied using FTIR spectroscopy. The studies support the proposition that TDI （tolylene diisocyanate） acts as a coupling agent between the epoxy and polyethers, forming a urethane linkage with the former and the latter, respectively. Me THPA-cured ER/ITPs blends were characterized using dynamic mechanical analysis （DMA） and thermogravimetric analysis （TGA）. It is indicated the glass transition temperature （T） of systems was lower than the T of pure epoxy resin and overfull ITPE separated from the modified epoxy resin and formed another phase at an ITPE-content of more than 10wt%. The thermal stability was decreased by the introduction of ITPE. The impact strength and the flexural strength of the cured modifiedepoxy increased with increasing the ITPE content and a maximum plateau value of about 24.03 kJ/m^2 and 130.56 MPa was measured in 10wt% ITPE. From scanning electron microscopy （SEM） studies of the fractrue surfaces of ER/ITPE systems, the nature of the micromechanisms responsible for the increases in toughness of the systems was identified.
文摘Polysiloxane bearing pendant quaternary ammonium groups (PSI) was used to modify the surface properties of epoxy resins. In the cured resin, PSI formed the dispersed phase. Remarkable enrichment and gradient distribution of polysiloxane on the surface region of the epoxy resins were demonstrated by XPS analysis. The composition and properties of the surface of PSI-modified epoxy resin, which is in contact with the mold, are dependent on the material of the mold. Through the incorporation. of PSI, epoxy resins with low surface energy and low friction coefficient were obtained. Polysiloxane with lower ionic group content shows a higher degree of enrichment on the resin surface and leads to a higher contact angle against water, while the polysiloxane having optimum compatibility with the epoxy resin shows a greater effect in reducing the static friction coefficient of the resin against glass.
基金Funded by the National Natural Science Foundation of China(No.50502027)
文摘Amino-terminated polyethers and amino-terminated polyurethane were used as curing agent to cure the epoxy resin together and get a series of cured products. The damping properties of the composites were studied by DMA test at different measurement frequencies. Damping mechanical tests show that the flexible epoxy resin has higher loss factor than common epoxy. The highest loss factor reaches 1.57. Also the height and position of loss factor peak of the flexible epoxy resin varies by changing the content of amino-terminated polyethers. Results shows that the flexible epoxy resin can be used as damping polymer materials at room temperature or in common frequency range.
基金supported by the National 863 Plan(No.2006AA03A209)New Century Excellent Talent Plan (No.NECT-05-0660) from Ministry of EducationDefense Basic Research Item(No.D1420061057)
文摘A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.
基金supported by the Natural Science Foundation of Beijing(No.2092023)National Natural Science Foundation of China(No.51173012)the Fundamental Research Funds for the Central Universities(No.ZZ0912)
文摘A novel liquid hyperbranched polyether epoxy （HBPEE） based on commercially available hydroquinone （HQ） and 1,1,1-trihydroxymethylpropane triglycidyl ether （TMPGE） was synthesized through an A2 ＋ B3 one-step proton transfer polymerization. In order to improve the toughness, the synthesized HBPEE was mixed with diglycidyl ether of bisphenol A （DGEBA） in different ratios to form hybrids and cured with triethylenetetramine （TETA）. Thermal and mechanical properties of the cured hybrids were evaluated. Results show that addition of HBPEE can improve the toughness of cured hybrids remarkably at 〈 20 wt% loading, without compromising the tensile strength. However, the glass transition temperature （Tg） of the cured hybrids decreases with increasing HBPEE content. Fracture surface images from scanning electron microscope show oriented fibrils in hybrids containing HBPEE. The formation and orientation of the fibrils can absorb energy under impact and lead to an improvement of toughness. Furthermore, based on the morphology of fractured surfaces and the single Tg in each hybrid, no sign of phase separation was found in the cured hybrid systems. As a result, the toughening mechanism could be explained by in situ homogeneous toughening mechanism rather than phase separation mechanism.
