The selective aerobic oxidation of alkynes to corresponding α,β-acetylenic ketones was achieved in polyethylene glycol/dense CO2/O2 biphasic system without any catalyst or additive. The effects of reaction parameter...The selective aerobic oxidation of alkynes to corresponding α,β-acetylenic ketones was achieved in polyethylene glycol/dense CO2/O2 biphasic system without any catalyst or additive. The effects of reaction parameters, e.g. temperature, CO2 pressure, PEG molecular weight and loading on the reaction were carefully examined. Moreover, various substrates worked well in the presence of PEG 1000 under 5 MPa of CO2 and 2 MPa of O2 at 100 ℃ for 12 to 24 h and acceptable yield and selectivity could be obtained in most cases. Preliminary mechanistic investigations were also discussed.展开更多
This study was carried out to investigate the effects of silicon (Si) 3.6 mM (as calcium silicate) under drought stress induced by polyethylene glycol “PEG” at 15% (MW 8000), in addition to the control treatment on ...This study was carried out to investigate the effects of silicon (Si) 3.6 mM (as calcium silicate) under drought stress induced by polyethylene glycol “PEG” at 15% (MW 8000), in addition to the control treatment on growth and some biochemical constituents of date palm cv. Barhee cultured in vitro. Drought stress (15% PEG) depressed the growth of shoot and decreased protein content and chlorophyll concentration. Addition of 3.6 mM Si could improve the growth of shoot and increase the protein content and leaf chlorophyll concentrations of stressed plants. The inclusion of Si to the PEG containing medium significantly increased the catalase (CAT) and superoxide dismutase (SOD) activity in regenerated shoot, compared to other treatments. As well as drought stress 15% PEG induced significant accumulation of shoots proline, which were decreased by added silicon. Moreover, the results were also supported by the observation that PEG stress-induced decrease the response percentage of root induction and root lengths was reversed by added silicon. Addition of Si obviously significantly increased the wax content in leaves, response percentage of root induction and root lengths of plantlets under drought stress. The results of this study indicate that the application of silicon improved growth attributes, effectively mitigate the adverse effect of drought, and increase tolerance of date palm plants for drought stress during the course of date palm tissue cultures.展开更多
Membranes from block copolymer poly(amide-12-b-ethylene oxide)(Pebax1074) and its blends with different molecular weight poly(ethylene glycol)(PEG)(200, 400, 600, 1500, 4600 and 8000) were prepared. The thermal proper...Membranes from block copolymer poly(amide-12-b-ethylene oxide)(Pebax1074) and its blends with different molecular weight poly(ethylene glycol)(PEG)(200, 400, 600, 1500, 4600 and 8000) were prepared. The thermal properties and structures of Pebax1074/PEG blend membranes were characterized by DSC and SEM, and the gas permeation properties of CO_2 and N_2 were also investigated at different temperatures. For Pebax1074/PEG blend membranes with low molecular weight PEG(MW≤ 600), higher gas permeabilities than Pebax1074 were achieved. The permeability increased with the increase of PEG molecular weight. The addition of low molecular weight PEG resulted in decrease in activation energy of permeation. For Pebax1074/PEG blend membranes with high molecular weight PEG(MW≥ 1500), due to the melt of PEO phase crystals, the gas permeation properties of blend membranes were temperaturedependent, which could be divided into crystalline region, transition region and amorphous region according to two different transition temperatures. PEG molecular weight and operation temperature determined different gas permeation properties of Pebax1074/PEG blend membranes in three regions. The activation energies of permeation in crystalline region were larger than those in amorphous region.展开更多
A fabrication method which integrates silicon anisotropic etching micromachining with UV-LIGA technology to make complex microstmetures is presented. This proposed combined process enables the fabrication of high-aspe...A fabrication method which integrates silicon anisotropic etching micromachining with UV-LIGA technology to make complex microstmetures is presented. This proposed combined process enables the fabrication of high-aspect-ratio and three-dimensional （3D） microstructures, which cannot be fabricated by silicon bulk mieromachining or UV-LIGA alone. To demonstrate this combined method, the 100μm thick SU-8 micro gears were fabricated on the silicon convex square structure, which is 100μm × 100μm× 80μm in dimension. In the subsequent micro hot embossing process, a novel type of plastics polyethylene terephtalate glycol （PETG） was tried for use. Through optimizing process parameters, PETG shows the potential of being used as plastic replica in micro-electro-mechanical system （MEMS）. This fabrication technology provides a new option for the increasing need of functionality, quality and economy of MEMS.展开更多
基金supported by the National Natural Science Foundation of China(No.21172125)the Ministry of Science and Technology (2012BAD32B10)+1 种基金the "111" Project of Ministry of Education of China(Project No.B06005)the Committee of Science and Technology of Tianjin
文摘The selective aerobic oxidation of alkynes to corresponding α,β-acetylenic ketones was achieved in polyethylene glycol/dense CO2/O2 biphasic system without any catalyst or additive. The effects of reaction parameters, e.g. temperature, CO2 pressure, PEG molecular weight and loading on the reaction were carefully examined. Moreover, various substrates worked well in the presence of PEG 1000 under 5 MPa of CO2 and 2 MPa of O2 at 100 ℃ for 12 to 24 h and acceptable yield and selectivity could be obtained in most cases. Preliminary mechanistic investigations were also discussed.
文摘This study was carried out to investigate the effects of silicon (Si) 3.6 mM (as calcium silicate) under drought stress induced by polyethylene glycol “PEG” at 15% (MW 8000), in addition to the control treatment on growth and some biochemical constituents of date palm cv. Barhee cultured in vitro. Drought stress (15% PEG) depressed the growth of shoot and decreased protein content and chlorophyll concentration. Addition of 3.6 mM Si could improve the growth of shoot and increase the protein content and leaf chlorophyll concentrations of stressed plants. The inclusion of Si to the PEG containing medium significantly increased the catalase (CAT) and superoxide dismutase (SOD) activity in regenerated shoot, compared to other treatments. As well as drought stress 15% PEG induced significant accumulation of shoots proline, which were decreased by added silicon. Moreover, the results were also supported by the observation that PEG stress-induced decrease the response percentage of root induction and root lengths was reversed by added silicon. Addition of Si obviously significantly increased the wax content in leaves, response percentage of root induction and root lengths of plantlets under drought stress. The results of this study indicate that the application of silicon improved growth attributes, effectively mitigate the adverse effect of drought, and increase tolerance of date palm plants for drought stress during the course of date palm tissue cultures.
基金Financial support from the National Science and Technology Planning Project (No. 2011BAC08B00)the National High Technology Research and Development Program of China (863 Program) (No.2012AA03A611)
文摘Membranes from block copolymer poly(amide-12-b-ethylene oxide)(Pebax1074) and its blends with different molecular weight poly(ethylene glycol)(PEG)(200, 400, 600, 1500, 4600 and 8000) were prepared. The thermal properties and structures of Pebax1074/PEG blend membranes were characterized by DSC and SEM, and the gas permeation properties of CO_2 and N_2 were also investigated at different temperatures. For Pebax1074/PEG blend membranes with low molecular weight PEG(MW≤ 600), higher gas permeabilities than Pebax1074 were achieved. The permeability increased with the increase of PEG molecular weight. The addition of low molecular weight PEG resulted in decrease in activation energy of permeation. For Pebax1074/PEG blend membranes with high molecular weight PEG(MW≥ 1500), due to the melt of PEO phase crystals, the gas permeation properties of blend membranes were temperaturedependent, which could be divided into crystalline region, transition region and amorphous region according to two different transition temperatures. PEG molecular weight and operation temperature determined different gas permeation properties of Pebax1074/PEG blend membranes in three regions. The activation energies of permeation in crystalline region were larger than those in amorphous region.
基金Supported by the National Natural Science Foundation of China （No. 50575132）, Science and Technology Commission of Shanghai Mtmicipality （No. O5JC14061 ） and National Key Laboratory of Micro/Nano Fabrication Technology Foundation （No. 9140C7903060706）
文摘A fabrication method which integrates silicon anisotropic etching micromachining with UV-LIGA technology to make complex microstmetures is presented. This proposed combined process enables the fabrication of high-aspect-ratio and three-dimensional （3D） microstructures, which cannot be fabricated by silicon bulk mieromachining or UV-LIGA alone. To demonstrate this combined method, the 100μm thick SU-8 micro gears were fabricated on the silicon convex square structure, which is 100μm × 100μm× 80μm in dimension. In the subsequent micro hot embossing process, a novel type of plastics polyethylene terephtalate glycol （PETG） was tried for use. Through optimizing process parameters, PETG shows the potential of being used as plastic replica in micro-electro-mechanical system （MEMS）. This fabrication technology provides a new option for the increasing need of functionality, quality and economy of MEMS.
