Influence of polymer dispersants on dispersion stability of nano-TiO_2 aqueous suspension and its application in inner wall latex paint

The effects of SN5040 and polyethylene glycol（PEG） individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The adsorption mechanism of these dispersants was detected by zeta potential, isothermal absorption and FTIR analysis. It is found that SN5040 is superior for stabilizing nano-TiO2 in aqueous suspension to PEG in basic region, and the optimum mass fraction of SN5040 addition is 3%. In the case of NaCl addition, the optimum value increases with .the increase of NaCl concentration in the solution. When the mixture of SN5040 and PEG is employed, the antagonism appears preponderant. When SN5040 and PEG are added sequentially, the synergistic reaction takes place. The synergistic reaction can be attributed to the mechanism that PEG adsorption decreases the electronic repulsion between SN5040 molecules, which results in the increase of SN5040 adsorption density. PEG is adsorbed by the interaction with the pre-adsorbed SN5040 layer. Furthermore, the modified inner wall latex paint with well dispersed nano-YiO2 suspension is endowed with excellent ultraviolet absorption and antibacterial properties.

Preparation and Properties of Aqueous SCNTs Dispersion based on A UV-curable Polymeric Dispersant

A novel photosensitive copolymer P（SS-co-AA-g-GMA）（PSAG） was synthesized and utilized to noncovalently functionalize pristine single-walled carbon nanotubes（SCNTs）. PSAG was highly effective for the solubilization of SCNTs in water and validated by UV-vis absorption spectra experiments, resulting in homogeneous and stable PSAG-SCNT aqueous dispersion. The microstructure of SCNTs was observed through Raman spectroscopy and transmission electron microscopy. In addition, compared with the two common polymeric dispersants of Triton X-100 and PSS, PSAG demonstrated more effective performances for dispersing SCNTs under identical conditions. Furthermore, the photosensitive PSAG-SCNTs can be crosslinked after UV irradiation, leading to significant improvement in the water resistance of SCNT films. UV-cured films can be transferred to plastic wrap to form a flexible film with high electrical conductivity.

Dispersion polymerization of anionic polyacrylamide in an aqueous salt medium

Anionic polyacrylamide dispersions were prepared by dispersion polymerization in an aqueous salt medium, using acrylamide（AM） and acrylic acid（AA） as monomers and anionic polyelectrolytes as stabilizer. Effects of salt concentration, and molecular weight and concentration of stabilizers on the stability of the dispersions were investigated using a HAAKE rheometer and optical microscopy. The results showed that stable anionic polyacrylamide dispersions, consisting of smooth, spherical, polydisperse particles, could be obtained under the conditions of salt concentration ranging from 26 wt% to 30 wt%, concentration of stabilizers from 1.2 wt% to 1.8 wt%, and intrinsic viscosity of stabilizers from 2.98 dL·g^-1 to 3.74 dL·g^-1. The apparent viscosity of the stable dispersions changed very little with the shear rate, showing Newton fluid behavior.

MONODISPERSE MICRON-SIZED POLYACRYLAMIDE PARTICLES SYNTHESIZED BY DISPERSION POLYMERIZATION

Monodisperse micron-sized polyacrylamide （PAM） particles with a regular shape have been successfully prepared through dispersion polymerization of the monomer using a rotary reactor. FTIR and NMR spectroscopic results demonstrated the formation of PAM. POM and TEM observations revealed that PAM particles had a regular shape and good dispersity. A thick layer of surfactant （PVP） still existed on PAM particles after multiple centrifugation and ultrasonic re-dispersion in ethanol, which indicates a strong interaction between PVP and PAM. The effects of various polymerization factors on the average size of PAM particles have also been studied.

Preparation and Characterization of Non-porous Superparamagnetic Microspheres with Epoxy Groups by Dispersion Polymerization

Non-porous superparamagnetic polymer microspheres with epoxy groups were prepared by dispersion polymerization of glycidyl methacrylate (GMA) in the presence of magnetic iron oxide (Fe3O4) nanoparticles coated with oleic acid. The polymerization was carried out in the ethanol/water medium using polyvinylpyrrolidone (PVP) and 2,2’-azobisisobutyronitrile (AIBN) as stabilizer and initiator, respectively. The magnetic microspheres obtained were characterized with scanning electron microscopy (SEM), vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy (FTIR). The results showed that the magnetic microspheres had an average size of-1μm with superparamagnetic characteristics. The saturation magnetization was found to be 4.5emu.g-1. There was abundance of epoxy groups with density of 0.028 mmol·g^-1 in microspheres. The magnetic PGMA microspheres have extensive potential uses in magnetic bioseparation and biotechnology.

Electrically tunable holographic polymer templated blue phase liquid crystal grating

In this paper, we demonstrate an alternative approach to fabricating an electrically tunable holographic polymer tem- plated blue phase liquid crystal grating. This grating is obtained by preforming a polymer template comprised of periodic fringes, and then refilling it with a blue phase liquid crystal. Compared with conventional holographic polymer dispersed liquid crystal gratings, our grating can remarkably reduce its switching voltage from 200 V to 43 V while maintaining a sub-millisecond response time. The holographic polymer templated blue phase liquid crystal （HPTBPLC） grating is free from electrode patterning, thus leading to a lower cost and more flexible applications.

Kinetics investigations for holographic Bragg grating based on polymer dispersed liquid crystal

This paper investigates the monomer kinetics of polymer dispersed liquid crystal （PDLC） grating. Fourier transform infrared （FTIR） spectra are used in the studies of photoreaction kinetics. The results indicate that there is a relative stable stage arises after a very short initial stage. Based on FTIR studies, the monomer diffusion equation is deduced and necessary numerical simulations are carried out to analyse the monomer conversion which is an important point to improve phase separation structure of PDLC grating. Some simulation results have a good agreement with experimental data. In addition, the effects induced by monomer diffusion constant D and diffusion-polymerization-ratio rate R are discussed. Results show that monomer conversion can be improved by increasing value of D. Besides, a good equilibrium state （R = 1） is more beneficial to the diffusion of monomer which is important in the process of phase separation.

Preparation of microsized crosslinked microspheres by dispersion copolymerization of polystyrene/polyethylene glycol 200-dimethacrylae

Dispersion copolymerization of styrene with polyethylene glycol 200-dimethacrylae as the cross-linking agent was completed by using poly（N-vinyl pyrrolidone） and 2,2-azo-bisisobutyronitrile as the steric stabilizer and initiator, respectively. Crosslinked copolymeric microspheres were prepared directly by the one-step method of dispersion copolymerization. The effects of the content of polyethylene glycol 200-dimethacrylae on the particle morphology and the copolymerization rate were investigated. It shows that the crosslinking agent plays an important role in the particle morphology and the system stability. When the content of crosslinking reached 2.5wt%, the floriated particles were obtained.

THE VISCOELASTIC EFFECT ON THE FORMATION OF MESO-GLOBULAR PHASE OF DILUTE HETEROPOLYMER SOLUTIONS

Linear homopolymer chains in poor solvent exist either as individual crumpled single chain globules or asmacroscopic precipitate, depending on whether the solution is in the one- or the two-phase region. However, linearheteropolymer chains in dilute solution might be able to form stable mesoglobules made up of a limited number of chains ifthe degree of amphiphilicity of the chain is sufficiently high and the experimental conditions are appropriate. The self-assembly of block copolymers in a selective solvent is typical of such examples. In practice, the formation of stablemesoglobules can be directly related to the formation of novel polymeric nanopaticles in solution. In this article, we willaddress the formaton of mesoglobular phase not only on the basis of thermodynamics, but also from a kinetic point of view,which leads to the discussion of how viscoelasticity can affect the phase behavior of heteropolymer chains in dilute solution.The formation and stabilization of several different kinds of novel polymeric nanopedicles will be used to illustrate ourdiscussion.

PREPARATION OF POLYMER DISPERSED LIQUID CRYSTALS USING PHOTOPOLYMERIZATION

2-Hydroxyethyl methacrylate (HEMA) and styrene copolymers are prepared by photopolymerization. The electrooptical behavior and microstructure of the polymer dispersed liquid crystal films are investigated by using He-Ne laser and scanning electron microscopy, respectively. With increasing E7 content in the copolymer, droplet size increased, threshold voltage decreased.

Effect of Polymer Network Morphology on the Performance of Polymer Dispersed Liquid Crystal (PDLC) Composite Films

The effects of the morphologies of liquid crystal (LC) droplets left in polymer network on the performance of polymer dispersed liquid crystal composite films were investigated.By adjusting the relative content range of the crosslinking and diluents,the morphologies of polymer network can be changed.Therefore,the properties of PDLC composite films with imparity polymer morphologies were obtained by experiments and the finite element simulation.Results of the experimental and finite element simulation showed that the electro-optical properties of PDLC composite films were inversely proportional to the domain size of the polymer network and the mechanical properties were proportional to the domain size of the polymer network.

The Surface Properties of PAVAc Prepared by Dispersion Polymerization in ScCO_2

Dispersion copolymerization of acryionitrile-vinyi acetate （AN-VAc） has been successfully performed in supercriticai carbon dioxide （ScCO2） with a series of iipophilic/CO2-philic diblock copolymers, such as poly（ styrener-acrylonitrile）-b- poly （ 1, 1, 2, 2-tetrahydroperfluorooctyl methacrylate） （PSAN-b-PFOMA）, as steric stabilizers. The structure and the particle morphology of the product were characterised by FT-IR and SEM. In addition, the effects of the stabilizer on the surface properties of the products were investigated in detail. Results indicate that the surface free energy of the poly （AN-r-VAc） （PAVAc） film decreases dramatically because of the existence of the stabilizer. And, when the initial concentration of the monomer was 10% （the mass （g） of monomer to the volume （mL） of ScCO2 ） the optimal concentration of the stabilizer is about 5% （w/w% to monomers）.

CONTROLLED/"LIVING" RADICAL POLYMERIZATION OF STYRENE IN AN AQUEOUS DISPERSION SYSTEM

Atom transfer radical polymerization (ATRP) of styrene catalyzed by cuprous (CuX)/1,10-phenanthroline (Phen) and CuX/CuX2/Phen was conducted in an aqueous dispersed system. A stable latex was obtained by using ionic surfactant sodium lauryl sulfonate (SLS) or composite surfactants, such as SLS/polyoxyethylene nonyl phenyl ether (OP-10), SLS/hexadecanol and SLS/OP-10/hexadecanol, Among which SLS and SLS/OP-10/hexadecanol systems established better dispersed effect during the polymerization, It was found that Phen was a more suitable ligand than N,N,N',N',N'-pentamethyldiethylenetriamine (PMDETA) to maintain an appropriate equilibrium of the activator Cu(I) and the deactivator Cu(II) between the organic phase and the water phase, The effect of several initiators (such as EBiB, CCl4 and 1-PEBr) and the temperature on such a kind of ATRP system was also observed. The number-average molar mass (M-n) of polystyrene (PS) increased with the conversion and the molar mass distribution (M-w/M-n) remained narrow. These experimental data show that the polymerization could be controlled except for the quick increase of monomer conversion and the number-average molar mass of PS in the initial stage of polymerization. Furthermore, the initiator efficiency was found to be low (similar to57%) in CuX/Phen catalyzed system. To overcome this problem, Cu(II)X-2 (20 mol%-50 mol% based on CuX) was introduced into the polymerization system. In this case, higher initiator efficiency (60%-90%), low M-w/M-n of PS (as low as 1.08) were achieved and the molar masses of the PS fit with the theoretical ones.

Synthesis of crosslinked polystyrene particles by seeded batch polymerization with monomer absorption

A highly crosslinked, monodispersed polystyrene（PS） particle was prepared by a seeded batch dispersion polymerization with a monomer absorption method. Prior to polymerization, 1,9 lam monodispersed PS seed particles were treated under an optimum condition of monomer absorption. The effects of divinylbenzebe（DVB） concentration and polymerization temperature were examined for styrene（in PS seed）/styrene（in the second stage） mass ratio of 1：1 in the medium range of EtOH/water mass ratio of 100/0-80/20 and 2.3 μm uniform crosslinked PS particles containing 15%-20% （mass fraction） DVB were prepared at 60-70 ℃. The results show that monomer absorption before the second stage of polymerization is more effective to prepare highly crosslinked monodispersed PS particles.

Preparation of Fe_3O_4/PS Magnetic Particles by Dispersion Polymerization

Fe_3O_4/PS magnetic particles with core/shell structure has been prepared in the presence of Fe3O4 magnetic fluid in ethanol/water mixture.Magnetic particles with diameter size range from 5. 54 t0 187. 32 μm were obtained by different reaction conditions.Some parameters such as ethanol, PEG and monomer which affect particle size diameter and size distribution are discussed briefly in this paper.

Random lasing in dye-doped polymer dispersed liquid crystal film

A dye-doped polymer-dispersed liquid crystal film was designed and fabricated,and random lasing action was studied.A mixture of laser dye,nematic liquid crystal,chiral dopant,and PVA was used to prepare the dye-doped polymer-dispersed liquid crystal film by means of microcapsules.Scanning electron microscopy analysis showed that most liquid crystal droplets in the polymer matrix ranged from 30 μm to 40 μm,the size of the liquid crystal droplets was small.Under frequency doubled 532 nm Nd：YAG laser-pumped optical excitation,a plurality of discrete and sharp random laser radiation peaks could be measured in the range of 575–590 nm.The line-width of the lasing peak was 0.2 nm and the threshold of the random lasing was 9 m J.Under heating,the emission peaks of random lasing disappeared.By detecting the emission light spot energy distribution,the mechanism of radiation was found to be random lasing.The random lasing radiation mechanism was then analyzed and discussed.Experimental results indicated that the size of the liquid crystal droplets is the decisive factor that influences the lasing mechanism.The surface anchor role can be ignored when the size of the liquid crystal droplets in the polymer matrix is small,which is beneficial to form multiple scattering.The transmission path of photons is similar to that in a ring cavity,providing feedback to obtain random lasing output.

Viscoelastic modeling of the diffusion of polymeric pollutants injected into a pipe flow

This study focuses on the transient analysis of nonlinear dispersion of a polymeric pollutant ejected by an external source into a laminar pipe flow of a Newtonian liquid under axi-symmetric conditions.The influence of density variation with pollutant concentration is approximated according to the Boussinesq approximation and the nonlinear governing equations of momentum,pollutant concentration are obtained together with and Oldroyd-B constitutive model for the polymer stress.The problem is solved numerically using a semi-implicit finite difference method.Solutions are presented in graphical form for various parameter values and given in terms of fluid velocity,pollutant concentration,polymer stress components,skin friction and wall mass transfer rate.The model can be a useful tool in understanding the dynamics of industrial pollution situations arising from improper discharge of hydrocarbon pollutants into,say,water bodies.The model can also be quite useful for available necessary early warning methods for detecting or predicting the scale of pollution and hence help mitigate related damage downstream by earlier instituting relevant decontamination measures.

PREPARATION OF POLYMER PARTICLES WITH HIGH CONTENT OF MAGNETIC MATERIAL

A method for preparing polymer microspheres with high magnetic content is introduced.First of all,the ferrofluid prepared by co precipitation was treated with ethanol.Then,in the presence of the treated Fe 3O 4 particles,the dispersion polymerization of acrylamide was performed using poly (ethylene glycol) (PEG) as dispersant,AIBN as initiator,and ethanol as dispersing medium.The effects of the dispersing medium,the agitation intensity,the amount and properties of magnetic particles on the polymerization and magnetic content in the polymer microspheres are discussed.Finally,polyacrylamide particles having as high as 32.2% (by weight) magnetic Fe 3O 4 particles were prepared.

Preparation of cationic polyacrylamide microsphere emulsion and its performance for permeability reduction

In this paper, cationic polyacrylamide microspheres （CPAM） were synthesized using acrylamide （AM） and methacryloyloxyethyl trimethyl ammonium chloride （TMAEMC） as monomers, ammonium sulfate as dispersant, poly（acryloyloxyethyl trimethyl ammonium chloride） （PAETAC） as dispersion stabilizer, and ammonium persulfate as initiator. The synthetic method was dispersion polymerization. The effects of monomer ratio （AM/TMAEMC）, dispersant concentration, and dispersion stabilizer dosage on dispersion polymerization were systematically studied to determine the optimal preparation conditions. The structure and viscosity of the synthesized polymer were characterized by FTIR and capillary viscometry, respectively, and the particle sizes and distribution of the polymer microspheres were characterized by microscopy and dynamic light scattering, respectively. Finally, flow tests were conducted to measure the permeability reduction performance of the microspheres at various concentrations in sand packs with different permeability. Results show that CPAM emulsion of a solids content of 1 wt% has excellent performance in low-to-medium permeability formations （〈 1,000 mD）, and the efficiency may reach above 90%.

Phase Transition of Poly（acrylic acid-co-N-isopropylacrylamide） Core-shell Nanogels

A series of poly（acrylic acid） macromolecular chain transfer agents with different molecular weights were synthesized by reversible addition-fragmentation chain transfer （RAFT） poly- merization and characterized by 1^H NMR and gel permeation chromatography. Multiresponsive core-shell nanogels were prepared by dispersion polymerization of N-isopropylacrylamide in water using these poly（potassium acrylate） macro-RAFT agents as the electrostcric stabilizer. The size of the nanogels decreases with the amount of the macro-RAFT agent, indicating that the surface area occupied by per polyelectrolyte group is a critical parameter for stabilizing the nanogels. The volume phase transition and the zeta potentials of the nanogels in aqueous solutions were studied by dynamic light scattering and zetasizer analyzer, respectively.