A hydrophobic hypercrosslinked polymeric resin LC-1 was prepared and characterized. The properties of LC-1 resin were compared with those of a commercial hypercrosstinked polymer NDA-201 resin. In addition, the dynami...A hydrophobic hypercrosslinked polymeric resin LC-1 was prepared and characterized. The properties of LC-1 resin were compared with those of a commercial hypercrosstinked polymer NDA-201 resin. In addition, the dynamic adsorption of trichloroethylene (TCE) onto LC-1 under dry and humid conditions at 303 K was investigated, the result shows that LC-1 possesses high hydrophobic property and can remove TCE from gas stream without effect of high humidity efficiently.展开更多
The adsorption behaviors of 2-naphthalenesulfonic acid and aniline on a conventional macroporous resin Amberlite XAD4 and the other two newly-developed hypercrosslinked resins NDA101 and NDAI00 were investigated in a ...The adsorption behaviors of 2-naphthalenesulfonic acid and aniline on a conventional macroporous resin Amberlite XAD4 and the other two newly-developed hypercrosslinked resins NDA101 and NDAI00 were investigated in a single or binary batch system at 293 K and 313 K, respectively. All the adsorption isotherms of 2-naphthalenesulfonic acid and aniline on the test resins in both systems can fit well with the Langmuir equation, indicating that the adsorption is a favorable process. At the identical equilibrium concentration, the amount of aniline adsorbed on polymeric resins in the single system is higher than that in the binary system because of the competitive adsorption between 2-naphthalenesulfonic acid and aniline on the resin surface. However, the uptake amount of 2-naphthalenesulfonic acid in the binary system is markedly larger than that in the single system, which is presumably due to the cooperative effect arisen from the electrostatic interaction between 2-naphthalenesulfonic acid and aniline adsorbed on the resin surface. The simultaneous adsorption system was proven to be helpful for the selective adsorption toward 2-naphthalenesulfonic acid due to its larger selective index.展开更多
The catalyst boron trifluoride etherate was used to catalyze the reaction of epoxy resin with polyethylene glycol (PEG), and the effect of the concentration of the catalyst on the reaction is studied. It is shown that...The catalyst boron trifluoride etherate was used to catalyze the reaction of epoxy resin with polyethylene glycol (PEG), and the effect of the concentration of the catalyst on the reaction is studied. It is shown that there exist two competitive reactions : I, self polymerization of epoxy resin via chain growth and II, copolymerization of epoxy resin with PEG via step growth. At high concentration of the catalyst reaction I dominates and reaction II is negligible. On the contrary, at low concentration of the catalyst, reaction II dominates and block copolymers are formed In the intermediate case, the two reactions are comparable with the result that a gel structure is obtained.展开更多
Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al_2O_3-SiO_2/boron phenol formaldehyde resin(MAS/BPF) compos...Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al_2O_3-SiO_2/boron phenol formaldehyde resin(MAS/BPF) composites to lower the formation temperature of eutectic liquid phase and promote the ceramification of ceramifiable composites. The effects of fluxing agents on the thermogravimetric properties, phase evolution, and microstructure evolution of MAS/BPF composites were characterized by TG-DSC, XRD and SEM analyses. The results reveal that the addition of a fluxing agent highly reduces the decomposition rate of MAS/BPF composites. Fluxing agents lower the formation temperatures of liquid phases of ceramifiable MAS/BPF composites obviously, and then promote the ceramification and densification process. The final residues of composites are ceramic surrounded by large amount of glass phases.展开更多
Three chelating resins were prepared by reacting poly (beta-chloroethyl glycidyl ether) with benzidine, o-tolidine and o-dianisidine respectively, and their structures were confirmed by IR spectra and elementary analy...Three chelating resins were prepared by reacting poly (beta-chloroethyl glycidyl ether) with benzidine, o-tolidine and o-dianisidine respectively, and their structures were confirmed by IR spectra and elementary analyses. The adsorption properties of the resins for Au(III), pd(II), Pt(IV), Hg(II), Cu(II), Pb(II) and Zn(II) were also investigated. The results show that the resin incorporating o-dianisidine exhibits high affinity for Au(III) within a broad range of hydrochloric acid, and selectively sorbs Au(III) in the coexistance of Cu(II), Zn(II) and Mg(II). Desorption of Au(III), Pd(II) and Pt(IV) sorbed proceeded quantitatively using 0.1 mol/l hydrochloric acid containing 2%-10% thiourea as desorbents.展开更多
Oilless alkyd resin modified with the silicoorganic compounds has been obtained successfully by polymerization.At appropriate proportion of silicoorganic compounds,the polymerized product has higher hardness and lustr...Oilless alkyd resin modified with the silicoorganic compounds has been obtained successfully by polymerization.At appropriate proportion of silicoorganic compounds,the polymerized product has higher hardness and lustre than that of oilless alkyd resin.展开更多
Non-precious metal nitrogen-doped carbonaceous materials have attracted tremendous attention in the field of electrochemical energy storage and conversion.Herein,we report the designed synthesis of a novel series of C...Non-precious metal nitrogen-doped carbonaceous materials have attracted tremendous attention in the field of electrochemical energy storage and conversion.Herein,we report the designed synthesis of a novel series of Co-N-C nanocomposites and their evaluation of electrochemical properties.Novel yolkshell structured Co nanoparticles@polymer materials are fabricated from the facile coating polymer strategy on the surface of ZIF-67.After calcination in nitrogen atmosphere,the Co–N–C nanocomposites in which cobalt metal nanoparticles are embedded in the highly porous and graphitic carbon matrix are successfully achieved.The cobalt nanoparticles containing cobalt metal crystallites with an oxidized shell and/or smaller(or amorphous)cobalt-oxide deposits appear on the surface of graphitic carbons.The prepared Co–N–C nanoparticles showed favorable electrocatalytic activity for oxygen reduction reactions,which is attributed to its high graphitic degree,large surface area and the large amount existence of Co–N active sites.展开更多
A compact, low-cost and high-output-power silicon-wafer solar strip-cells-array module (SCAM) wus experimentally demonstrated. The proposed SCAM consisted mainly of a silicon-wafer strip-cell sparse array and low-co...A compact, low-cost and high-output-power silicon-wafer solar strip-cells-array module (SCAM) wus experimentally demonstrated. The proposed SCAM consisted mainly of a silicon-wafer strip-cell sparse array and low-concentration- ratio array concentrator based on an epoxy resin polymer (ERP) cylindrical piano-convex lens. A polymer replication process based on a polydimethylsiloxane mold was used to fabricate the ERP lens array concentrator. The results show that 46.94% of the silicon-wafer cell was saved in the designed SCAM. Moreover, the output power of the SCAM with a low concentration ratio of 8 suns was improved by 8.6%, compared with a whole piece of a conventional silicon-wafer solar cell with the same area as the module. The proposed method encapsulating solar cells provides a means to reduce the usage of silicon cells in modules as well as improving the output power of modules.展开更多
The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performa...The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.展开更多
基金Department of Environmental Protection of Jiangsu Province for financial support(No.2007029).
文摘A hydrophobic hypercrosslinked polymeric resin LC-1 was prepared and characterized. The properties of LC-1 resin were compared with those of a commercial hypercrosstinked polymer NDA-201 resin. In addition, the dynamic adsorption of trichloroethylene (TCE) onto LC-1 under dry and humid conditions at 303 K was investigated, the result shows that LC-1 possesses high hydrophobic property and can remove TCE from gas stream without effect of high humidity efficiently.
基金This study was funded by the National Natural Science Foundation of China(No.20274017)the Natural Science Foundation of Jiangsu Province(No.BK2004415).
文摘The adsorption behaviors of 2-naphthalenesulfonic acid and aniline on a conventional macroporous resin Amberlite XAD4 and the other two newly-developed hypercrosslinked resins NDA101 and NDAI00 were investigated in a single or binary batch system at 293 K and 313 K, respectively. All the adsorption isotherms of 2-naphthalenesulfonic acid and aniline on the test resins in both systems can fit well with the Langmuir equation, indicating that the adsorption is a favorable process. At the identical equilibrium concentration, the amount of aniline adsorbed on polymeric resins in the single system is higher than that in the binary system because of the competitive adsorption between 2-naphthalenesulfonic acid and aniline on the resin surface. However, the uptake amount of 2-naphthalenesulfonic acid in the binary system is markedly larger than that in the single system, which is presumably due to the cooperative effect arisen from the electrostatic interaction between 2-naphthalenesulfonic acid and aniline adsorbed on the resin surface. The simultaneous adsorption system was proven to be helpful for the selective adsorption toward 2-naphthalenesulfonic acid due to its larger selective index.
文摘The catalyst boron trifluoride etherate was used to catalyze the reaction of epoxy resin with polyethylene glycol (PEG), and the effect of the concentration of the catalyst on the reaction is studied. It is shown that there exist two competitive reactions : I, self polymerization of epoxy resin via chain growth and II, copolymerization of epoxy resin with PEG via step growth. At high concentration of the catalyst reaction I dominates and reaction II is negligible. On the contrary, at low concentration of the catalyst, reaction II dominates and block copolymers are formed In the intermediate case, the two reactions are comparable with the result that a gel structure is obtained.
文摘Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al_2O_3-SiO_2/boron phenol formaldehyde resin(MAS/BPF) composites to lower the formation temperature of eutectic liquid phase and promote the ceramification of ceramifiable composites. The effects of fluxing agents on the thermogravimetric properties, phase evolution, and microstructure evolution of MAS/BPF composites were characterized by TG-DSC, XRD and SEM analyses. The results reveal that the addition of a fluxing agent highly reduces the decomposition rate of MAS/BPF composites. Fluxing agents lower the formation temperatures of liquid phases of ceramifiable MAS/BPF composites obviously, and then promote the ceramification and densification process. The final residues of composites are ceramic surrounded by large amount of glass phases.
文摘Three chelating resins were prepared by reacting poly (beta-chloroethyl glycidyl ether) with benzidine, o-tolidine and o-dianisidine respectively, and their structures were confirmed by IR spectra and elementary analyses. The adsorption properties of the resins for Au(III), pd(II), Pt(IV), Hg(II), Cu(II), Pb(II) and Zn(II) were also investigated. The results show that the resin incorporating o-dianisidine exhibits high affinity for Au(III) within a broad range of hydrochloric acid, and selectively sorbs Au(III) in the coexistance of Cu(II), Zn(II) and Mg(II). Desorption of Au(III), Pd(II) and Pt(IV) sorbed proceeded quantitatively using 0.1 mol/l hydrochloric acid containing 2%-10% thiourea as desorbents.
文摘Oilless alkyd resin modified with the silicoorganic compounds has been obtained successfully by polymerization.At appropriate proportion of silicoorganic compounds,the polymerized product has higher hardness and lustre than that of oilless alkyd resin.
基金the support of Chinese Government 1000 young talent planthe support of Curtin Strategic International Research Scholarship+8 种基金Curtin University Mobility ScholarshipChinese Government Award for Outstanding Self-Financed Students Abroadthe support from ATN Seed fundARC Future Fellowship (FT180100705)Discovery Project (DP180102297)the facilities, scientific and technical assistance of the Curtin University Electron Microscope Laboratories, a facility partially funded by the University, State and Commonwealth GovernmentsThe use of equipment, scientific and technical assistance of the WA X-Ray Surface Analysis Facility, funded by the Australian Research Council LIEF grant LE120100026the facilities, and the scientific and technical assistance of the Australian Microscopy & Microanalysis Research Facility at the Centre for Microscopy, Characterization & Analysis (CMCA), the University of Western Australia (UWA), a facility funded by the University, State and Commonwealth Governmentsthe support from the Australian Research Council Future Fellowship (FT12100178)
文摘Non-precious metal nitrogen-doped carbonaceous materials have attracted tremendous attention in the field of electrochemical energy storage and conversion.Herein,we report the designed synthesis of a novel series of Co-N-C nanocomposites and their evaluation of electrochemical properties.Novel yolkshell structured Co nanoparticles@polymer materials are fabricated from the facile coating polymer strategy on the surface of ZIF-67.After calcination in nitrogen atmosphere,the Co–N–C nanocomposites in which cobalt metal nanoparticles are embedded in the highly porous and graphitic carbon matrix are successfully achieved.The cobalt nanoparticles containing cobalt metal crystallites with an oxidized shell and/or smaller(or amorphous)cobalt-oxide deposits appear on the surface of graphitic carbons.The prepared Co–N–C nanoparticles showed favorable electrocatalytic activity for oxygen reduction reactions,which is attributed to its high graphitic degree,large surface area and the large amount existence of Co–N active sites.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61377021 and 61671329)
文摘A compact, low-cost and high-output-power silicon-wafer solar strip-cells-array module (SCAM) wus experimentally demonstrated. The proposed SCAM consisted mainly of a silicon-wafer strip-cell sparse array and low-concentration- ratio array concentrator based on an epoxy resin polymer (ERP) cylindrical piano-convex lens. A polymer replication process based on a polydimethylsiloxane mold was used to fabricate the ERP lens array concentrator. The results show that 46.94% of the silicon-wafer cell was saved in the designed SCAM. Moreover, the output power of the SCAM with a low concentration ratio of 8 suns was improved by 8.6%, compared with a whole piece of a conventional silicon-wafer solar cell with the same area as the module. The proposed method encapsulating solar cells provides a means to reduce the usage of silicon cells in modules as well as improving the output power of modules.
文摘The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.