Efficient in-situ end-functionalization of polydienes by isothiocyanate via neodymium mediated coordinative chain transfer polymerization system

End-functionalization of polydiene rubbers can not only improve its compatibility with inorganic fillers,but also enhance the overall mechanical properties.Nevertheless,for traditional neodymium(Nd)diene polymerization systems,it is highly challenging to achieve such end-functionalizations,because most of polydienyl chains are capped withη3-allyl-Nd moiety during the end of polymerization,which shows very poor reactivity with nucleophile compounds.We launched a new diene polymerization strategy calling coordinative chain transfer polymerization(CCTP)[1].In such a system,all the polydienyl chains are capped withη1-allyl-Al moieties,which reveal greater reactivity with cyclic esters and epoxide compounds,providing an effective manner to prepare polydiene-polyester amphiphilic block copolymers.Inspired by such findings,we now show herein how such types of chain-ends react with isot-hiocyanate to demonstrate an efficient in-situ manner to access end-functionalized polydienes by using CCTP.

PRECISE SYNTHESIS OF OLEFIN BLOCK COPOLYMERS USING A SYNDIOSPECIFIC LIVING POLYMERIZATION SYSTEM

This feature article summarizes the synthesis of novel olefin block copolymers using fast syndiospecific living homo- and copolymerization of propylene, higher 1-alkene, and norbornene with ansa-fluorenylamidodimethyltitanium- based catalyst according to the authors＇ recent results. The catalytic synthesis of monodisperse polyolefin and olefin block copolymer was also described using this living system.

STUDIES OF THE INITIATION MECHANISM OF VINYL POLYMERIZATION WITH THE SYSTEM PERSULFATE/N-ALKYL SUBSTITUTED ETHYLENEDIAMINE DERIVATIVES

Effects of N-alkyi substituted ethylenediamine derivatives on vinyl polymerization using persulfate as initiator were studied. The apparent kinetic equations and overall activation energies of acrylamide polymerization were determined using the above mentioned system as initiator. The promoting activities of different diamine derivatives on vinyl polymerization are in the order of tertiary diamine>secondary diamine>primary diamine. Diamines having methyl groups as the substituent on their nitrogen atom possess higher promoting activity than that of having larger alkyl groups. The initial free radicals produced through the redox reaction of persuifate and diamines were studied by spin strapping technique and ESR spectroscopy. The results obtained confirm the fact that the initial free radicals of the diamine species can initiate vinyl polymerization and become the amino end group of the resulting polymers.

Polymerization of Norbornene via an Iron-Based Complex/MAO Catalytic System

Polynorbornenes were synthesized in the presence of an iron based catalyst, 2,6-bis[1-(2,6-diisopropyl-phenylimino)ethyl]pyridine iron(Ⅱ) dichloride. The FTIR, 1H NMR and 13C NMR analysis results revealed that the structure of the obtained polynorbornenes consisted of vinyl addition polymer substructures without any ring-opening structures. The polymers were amorphous with a short-range order, displayed in the WAXD(wide angle X-ray diffraction) diagrams. The glass transition temperatures ranged from 200 to 400 ℃. The effects of the polymerization reaction conditions, such as Al/Fe molar ratio and toluene/CH_2Cl_2 volume ratio, on the activity, intrinsic viscosity and T_g were also studied.

On the Mechanism of Latex Particles Formation in Polymerization in Heterogeneous Monomer-Water System

Investigations show that in monomer water heterogeneous systems polymerization, located in the interface, can disperse the system. Following polymerization in the density gradient field it is shown that in such systems latex particles are nucleated from monomer microdroplets, containing a certain amount of polymer molecules. It could be considered that, independently of the nature of the monomer itself, polymerization in monomer water statistic heterogeneous systems modulate emulsion polymerization process.

The Polymerization of Methyl Methacrylate with a New Nd(O—i-Pr)_(3)—AI(i-Bu)_(3)Catalyst System

Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst system of Nd(O? Pr) 3 in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concentration, catalyst aging time, solvents, the third component CCl 4, temperature and time on the polymerization of MMA were studied. The results showed that the polymerization conversion reached more than 80% at a catalyst concentration of 9 2×10 -3 mol/L. The appropriate molar ratio of CCl 4/Nd was 4. Hydrocarbon was preferred for the polymerzation to obtain a high conversion and a high M W of PMMA. The 1H NMR spectra of PMMA indicated that the lower the temperature, the higher the syndiotactic content of PMMA was obtained.

A Population Balance Model for Disperse Systems:Particle Size Distribution in Suspension Polymerization

On the basis of population balance a mathematical model is developed to describe the formation of polymer particle in styrene suspension polymerization. The characteristics of coalescence and breakage of droplets and the gel effect are analyzed in particular. Parameters of the models are estimated by experimental data on reaction conversion and particle size distribution. The results show that the model is suitable for predicting polymerization processes.

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅥ. THE POLYMERIZATION KINETICS OF 4, 4′-BIPHENYLDICARBONITRILE CATALYZED BY LEWIS ACID-METAL SYSTEM

The polymerization kinetics of 4, 4′-biphenyldicarbonitrile using cuprous chloride-zinc system as catatyst was investigated. the concentration of unreacted cyano group was measured by infrared spectroscopic analysis using potassium ferricyanide as the internal reference. It was found that the polymerization rate is directly proportional to the concentrations ofcyano group, cuprous chloride and zinc, and the activation energy of the polymerization is as Tow as 18.4 KJ/mol. In addition, the other kinetics parameters were obtained and discussed.

Polymerization of Styrene and 1,3-Butadiene by Catalyst Systems Based on Calix[4]arene Neodymium Complexes

Polymerization of styrene and 1,3-butadiene were performed by calix[4]arene-neodymium complexes using di-n-butylmagnesium and tri-iso-butylaluminum as cocatalyst respectively. The effect of the substituent groups in calix[4]arene on the catalytic activity was first investigated.

LIGAND EFFECT OF CATALYTIC SYSTEM WCl_6-Et_2Al FOR RING OPENING METATHESIS POLYMERIZATION OF DICYCLOPENTADIENE

Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.

MACROPROCESS OF PARTICLE FORMATION IN SUSPENSION POLYMERIZATION OF STYRENE WITH INORGANIC STABILIZER SYSTEM

The macroprocess of particle formation from suspension droplets of styrene in a pdymerizationsystem was investigated.Inorganic hydroxyapatite or its mixture with polyvinyl alcohol as thepolymerization system was used.Those items such as the effects of the Weight fraction of dispersed-phase,the amount of the inorganic stabilizer and the agitation speed on the breakup and coalescence of thetransient dispersed drops etc.Were examined.Results showd that the dynamic behavior of the transi-ent polymer droplets changed in the presence of the suspension stabilizer during the reaction.

Polymerization of Methyl Acrylate with Nd-Al-α,α'-Dipyridyl Catalyst System

The polymerization of methyl acrylate (MA) with Nd(naph) 3 Al( i Bu) 3 α,α′ dipyridyl catalyst was studied. The molecular weight and its distribution were determined by gel penetration chromatography. Kinetic studies show that the MA polymerization rate is the first order with respect to monomer concentration. The apparent activation energy of MA polymerization is 49 34 kJ·mol -1 .

STUDY ON THE POLYMERIZATION OF ACRYLONITRILE INITIATED BY POLYPROPYLENE-BASED VANADYL POLYIMIDODIACETATE——THIOUREA REDOX SYSTEM

The present paper deals with the kinetics of polymerization of acrylonitrile (AN) initialed by the redox system of polypropylene-based vanadyi polyimidodiacetate (PV)-thiourea (TU)in aqueous sulfuric acid in the temperature range from 25 to 40℃. The polymerization rate was measured by varying the concentrations of monomer, vanadyl polyimidodiacetate, thiourea and sulfuric acid. The overall rate of polymerization was summarized asRp=2.2×10~5e^(-6.560/RT) [AN]^(1.0)[PV]^(0.50)[TU]^(1.5)[H_2SO_4]^(2.0)The molecular weight of polyacrylonitrile based on the experimental data was:(?)=k 1/T [pv]^(0.50)[TU]^(1.5)[H_2SO_4]^(2.0)These results indicated that the chain radicals are terminated by combination and/or disproportionation rather than chain transfer. The cooperation effect of carboxylic groups and the macromolecular field effect of polymer supporter are the characters of vanadyl polyimidodiacetate such as the case reported in early paper.

CONTROLLED/"LIVING" RADICAL POLYMERIZATION OF STYRENE IN AN AQUEOUS DISPERSION SYSTEM

Atom transfer radical polymerization (ATRP) of styrene catalyzed by cuprous (CuX)/1,10-phenanthroline (Phen) and CuX/CuX2/Phen was conducted in an aqueous dispersed system. A stable latex was obtained by using ionic surfactant sodium lauryl sulfonate (SLS) or composite surfactants, such as SLS/polyoxyethylene nonyl phenyl ether (OP-10), SLS/hexadecanol and SLS/OP-10/hexadecanol, Among which SLS and SLS/OP-10/hexadecanol systems established better dispersed effect during the polymerization, It was found that Phen was a more suitable ligand than N,N,N',N',N'-pentamethyldiethylenetriamine (PMDETA) to maintain an appropriate equilibrium of the activator Cu(I) and the deactivator Cu(II) between the organic phase and the water phase, The effect of several initiators (such as EBiB, CCl4 and 1-PEBr) and the temperature on such a kind of ATRP system was also observed. The number-average molar mass (M-n) of polystyrene (PS) increased with the conversion and the molar mass distribution (M-w/M-n) remained narrow. These experimental data show that the polymerization could be controlled except for the quick increase of monomer conversion and the number-average molar mass of PS in the initial stage of polymerization. Furthermore, the initiator efficiency was found to be low (similar to57%) in CuX/Phen catalyzed system. To overcome this problem, Cu(II)X-2 (20 mol%-50 mol% based on CuX) was introduced into the polymerization system. In this case, higher initiator efficiency (60%-90%), low M-w/M-n of PS (as low as 1.08) were achieved and the molar masses of the PS fit with the theoretical ones.

“LIVING”/CONTROLLED RADICAL POLYMERIZATION OF ETHYL METHYLACRYLATE WITH 2,2’-AZOBISISOBUTYRONITRILE/FERRIC CHLORIDE/TRIPHENYLPHOSPHINE INITIATION SYSTEM

'Living'/controlled radical polymerization of ethyl methacrylate (EMA) was carried out with a 2,2'-azobisisobutyronitrile (AIBN)/ferric chloride (FeCl_3)/triphenylphosphine (PPh_3) initiation system at 85℃. Thc numberaverage molecular weight (M_n) increases linearly with monomer conversion and the rate of polymerization is first order withrespect to monomer concentration. The M_w of PEMA ranges from 3900 to 17600 and the polydispersity indices are quitenarrow (1.09～1.22). The conversion can reach up to～100% and M_w of the polymers obtained is close to that designed. Thepolymerization mechanism belongs to the reverse atom transfer radical polymerization (ATRP). The polymer was end-functionalized by chlorine atom, which acts as a macroinitiator to proceed extension polymerization in the presence ofCuBr/bipy catalyst system via an ATRP process. The presence of ω-chlorine in the PEMA obtained was identified by ~1H-NMR spectrum.

A NOVEL PHOTO-INITIATING SYSTEM FOR ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE

A novel photo-induced initiating system, 2,2-dimethoxy-2-phenylacetophenone (DMPA)/ferric tri(NN-diethyldithiocarbamate) [Fe(DC)(3)], was developed and used for the atom transfer radical polymerization (ATRP) of styrene in toluene. The polymerization proceeds with DMPA as photo-initiator, Fe(DC)(3) as catalyst and DC as a reversible transfer group, while the halogen and ligands are free. Well-defined PSt was prepared and the polymerization mechanism revealed by end group analysis belongs to a reverse ATRP. Block copolymer was prepared by using thus obtained PSt as macroinitiator and Fe(DC)(2) as catalyst under UV light irradiation via a conventional ATRP process.

THE POLYMERIZATION OF EPICHLOROHYDRIN WITH Nd(i-oPr)_3-Al(i-Bu)_3 SYSTEM

Epichlorohydrin (ECH) was polymerized with a rare earth catalytic system: Nd (i-OPr)_3-Al (i-Bu)_3. The effects of Al/Nd molar ratio, solvents, the polymerization time and temperature,the aging time and temperature of the catalyst preparation were studied. The results showed thatat a low Al/Nd molar ratio (4) of the Nd(i-OPr)_3-Al(i-Bu)_3 system ECH polymerized at a lowtemperature (248K) with a high conversion. The average molecular weight ofpolyepichlorohydrin (PECH) ranged from 1×10~5 to 3×10~5.

Kinetics and Mechanism of the Polymerization of Methyl Methacrylate in a Y(acac)_3/n-BuMgCl System

Based on the kinetics equation proposed by T. Kagiya, the kinetic study on the polymerization of methyl methacrylate(MMA) by Y(acac)_3/n-BuMgCl was carried out with a dilatometer. It was found that the rate of propagation is the first order with respect to the concentration of both active center and monomer. Thus, the equation of propagation rate can be described as R_p=K_p[c][M]. In addition, the instantaneous chain initiation and single molecular termination were concluded for the present system. The activation energy is close to 32 kJ/mol. In the polymerization, n-BuMgCl acts not only as the cocatalyst, but also as chain transfer agent with c_I=3. 6 × 10^(-4).

Microwave-assisted Polymerization of ε-Caprolactone with Maleic Acid as Initiator and Drug Release Behavior of Ibuprofen-Poly(ε-caprolactone) System

Poly(e-caprolactone) (PCL) with weight-average molar mass over 10000 g/mol was synthesized by microwave-assisted ring-opening polymerization of e-caprolactone (e-CL) with maleic acid (MA) as initiator (2.45 GHz, 360 W, 85 min). Ibuprofen-PCL controlled release system was prepared directly by the ROP of e-CL in its mixture with ibuprofen. The release of ibuprofen from the system was sustained and steady.

TERMINATION AND TRANSFER OF THE CHAIN RADICALS IN THE POLYMERIZATION OF ACRYLONITRILE INITIATED BY VANADIUM(V)-THIOUREA REDOX SYSTEM

The dependence of the molecular weights on the concentration of reactants in the polymerization of acrylonitrile initiated by vanadium (V)-thiourea redox system has been investigated. It was found that the molecular weights of the polymer change nonlinearly with increasing concentrations of nitric acid and thiourea. Probably, the composition of the complexes exert a great influence on the chain initiation and termination. The reaction of 'complextermination' gives rise to the decrease of the molecular weights markedly while the concentrations of thiourea and vanadium (V)in the range from one to three molar ratios.