Effect of Polypropylene Fibers on the Long-term Tensile Strength of Concrete

The influence of low volume fraction of polypropylene（PP） fibers on the tensile properties of normal and high strength concretes was studied. The experimental results indicate that the addition of PP fibers in concrete leads to a reduction in tensile strength during the age of 28 d. Whereas, after 28 days, there is a notable effect in tensile strength due to PP fibers restraining the formation and growth of microcracks in concrete, which improves the continuity and integrality of concrete structure, Thus, a low volume fraction of PP fibers is beneficial to enhancing the long-term tensile strength of concrete materials and improving the durability of concrete structures.

The Mechanical Properties of Polypropylene Fiber Reinforced Concrete

The compressive, shear strengths and abrasion-erosion resistance as well as flexural properties of two polypropylene fiber reinforced concretes and the comparison with a steel fiber reinforced concrete were reported.The exprimental results show that a low content of polypropylene fiber (0.91kg/m3 of concrete) slightly decreases the compressive and shear strengths, and appreciably increased the flexural strength, but obviously enhances the toughness index and fracture energy for the concrete with the same mix proportion, consequently it plays a role of anti-cracking and improving toughness in concrete. Moreover, the polypropylene mesh fiber is better than the polypropylene monofilament fiber in improving flexural strength and toughness of concrete, but the two types of polypropylene fibers are inferior to steel fiber. All the polypropylene and steel fibers have no great beneficial effect on the abrasion-erosion resistance of concrete.

Flexural Strength and Behavior of Polypropylene Fiber Reinforced Concrete Beams

The strength and deformation characteristics of polypropylene fiber reinforced concrete ( PFRC) beams were investigated by four-point bending procedures in this paper. Two kinds of polypropylene fibers with different fiber contents (0.2% , 0.5% , 1.0% and 1.5% ) by volume were used in, the beam, which measured 100 × 100 mm with a span of 300 mm. It was found that the strength of the reinforced concrete beams was significantly decreased, whereas the flexural toughness was improved, compared to those unreinforced concrete beams. Geometry properties and volume contents of polypropylene fiber were considered to be important factors for improving the flexural toughness. Moreover, the composite mechanism between polypropylene fiber and concrete was analyzed and discussed.

Properties and Mechanism on Flexural Fatigue of Polypropylene Fiber Reinforced Concrete Containing Slag

Properties and mechanism were investigated on flexural fatigue of concrete containing polypropylene fibers and ground granulated blast furnace slag（GGBFS）.Four polypropylene fibers’volume fractions and five slag proportions were considered.An experiment was conducted to obtain the fatigue lives at three stress levels in 20 Hz frequency and at a constant stress level of 0.59 in four frequency respectively.Mechanism and evaluation were investigated based on the experimental data.Fatigue life span models were established.The results show that the addition of polypropylene fibers improves the flexural fatigue cumulative strength and fatigue life span.It is proposed that the slag particles and hydrated products improve Interfacial Transition Zone（ITZ）structure and benefit flexural fatigue performance.A composite reinforce effect is found with the incorporation of slag and polypropylene fibers.The optimum mixture contents 55%slag with 0.6%polypropylene fiber for the cumulative fatigue stress.Fatigue properties are decreased as the stress level increasing,the higher frequency reduces the fatigue strength more than lower frequency at a constant stress level.

CT Image-based Analysis on the Defect of Polypropylene Fiber Reinforced High-Strength Concrete at High Temperatures

With the application of X-ray computed tomography（CT） technology of C80 high-strength concrete with polypropylene fiber at elevated temperatures, the microscopic damage evolution process observation and image building could be obtained, based on the statistics theory and numerical analysis of the combination of concrete internal defects extension and evolution regularity of microscopic structure. The expermental results show that the defect rate has changed at different temperatures and can determine the concrete degradation threshold temperatures. Also, data analysis can help to establish the evolution equation between the defect rate and the effect of temperature damage, and identify that the addition of polypropylene fibers in the high strength concrete at high temperature can improve cracking resistance.

Anti-cracking Property of EVA-modified Polypropylene Fiber-reinforced Concrete Under Thermal-cooling Cycling Curing

In order to investigate the synergistic effect of re-dispersible powder-ethylene-vinyl acetate copolymer(EVA) and polypropylene fiber on the crack resistance of concrete under thermal fatigue loading, the compressive strength, ultimate tensile strength, ultimate tensile strain and tensile modulus of elasticity were tested. In addition, ultrasonic method and scanning electron microscope analysis were used to explain the microstructure mechanism. The results show that polypropylene fiberreinforced concrete presents a better performance on crack resistance than ordinary concrete, and the synergism of EVA and polypropylene fiber can improve the anti-cracking ability of concrete further.

Flexural Fatigue Behavior of Polypropylene Fiber Reinforced Segment Concrete

The influence of polypropylene fiber on the flexural fatigue performance of high-strength concrete (HSC), which could be used as cover of reinforcement of segment, was investigate by three-point load bending tests. Also, the flexural fatigue equations of high-strength concrete with and without polypropylene fiber were established through test analysis. The experimental results indicate that the addition of polypropylene fiber can improve the static bending strength of segment concrete, and the important is that it can markedly increase the flexural fatigue performance of the HSC subjected to cyclic bending load. Especially when with 1.37 kg/m3 addition of the fiber was corporate with silica fume and slag powder, the fatigue life of the HSC can be increased by 43.4% compared to that of the segment concrete without fiber, silica fume and slag.

A Study of Compressive, Flexural, Heat Humidity and Heat Transfer of Autoclaved Aerated Concrete Mixed Polypropylene Fiber under Climate of Bangkok

This paper presents the experimental results of study on mechanical properties, heat and humidity transfer through AAC （autoclaved aerated concrete） mixed with PP （polypropylene fiber）. The performance of AAC-PP is investigated in terms of compressive strength, flexural strength, splitting tensile strength, porosity, heat and humidity capacity. The results are compared with control specimen made of autoclaved aerated concrete only （Non-AAC-PP）. Results showed that ultimate compressive strength, flexural strength and splitting tensile strength can be obtained when the content of polypropylene fiber added at 0.75% by volume while porosity of specimens rapidly decreased when content of fiber addition increased above 1% of its volume. Additional, a comparison study of heat and humidity transfer properties on AAC-PP walls showed that the AAC-PP house had lower indoor air and moisture content than （Non-AAC-PP） house. Therefore, addition PP fiber on AAC increased mechanical properties, enhanced hygrothermal performance and reducing moisture content under tropical climate of Bangkok.

Mechanical Properties of Polypropylene Fiber Reinforced Concrete under Elevated Temperature

Apart from many advantages,High Strength Concrete(HSC)has disadvantages in terms of brittleness and poor resistance to fire.Various studies suggest that when polypropylene(PP)fibers are uniformly distributed within concrete,they play an active role in improving spalling resistance of concrete when exposed to elevated temperature while having no adverse effect on its mechanical properties.Therefore,there is a necessity to quantify the effect of the addition of polypropylene fibers in terms of the fiber dosage,the strength of the concrete,and the residual mechanical properties of fiber-reinforced concrete under exposure to high temperature from fire.The study was carried out on three water/cement(w/c)ratios(0.47,0.36&0.20)using granite aggregate for determining short term mechanical properties of Polypropylene fiber reinforced concrete in comparison to control mix.The experimental program includes 100×200 mm&150 x 300 mm cylinders with fiber volume of 0.5%,that were subjected to temperatures exposures of 400°C and 600°C for durations of 1 hour.From the results,it was observed that no significant enhancement in mechanical properties such as modulus of elasticity,Poisson’s ratio,split tensile strength,flexural strength,and compressive strength was observed at room temperature and at elevated temperatures.

Experimental study on behaviors of polypropylene fibrous concrete beams

Synthetic fibers made from nylon or polypropylene have gained application when loose and woven into geo textile form although no information on the matrix’s mechanical performance is obtained so that more understanding of their structural contribution to resist cracking can be determined. This paper presents the results of an experimental investigation to determine the performance characteristics of concrete reinforced with a polypropylene structural fiber. In this investigation “Fiber mesh” brand of fibers manufactured by SL Concrete System, Tennessee, USA and marketed by M/S Millennium Building System, Inc., Ban-galore, India are used. The lengths of the fibers used were 24 mm. Fiber dosages used were 0.9, 1.8, 2.7 kg/m3. A total of three mixtures, one for each fiber dosage were made. A standard slump cone test was conducted on the fresh concrete mix with and without fibers to determine the workability of the mix. The test program included the evaluation of hardened concrete properties such as compressive, split tensile, modulus of rupture and flexural strengths. The increase in compressive strength is about 36.25%, 26.20%, and 23.75% respectively that of plain concrete. This increase in strength was directly proportional to amount of fibers present in the mix. The increase in flexural strength for Mixes I^III is about 21%, 16.6%, and 23% respectively that of plain concrete specimens. An experimental investigation was also made to study the behaviors of reinforced fibers concrete beams (with longitudinal reinforcements) under two-point loading. The deflection and crack patterns were also studied. The improvements in strength and ductility characteristics were discussed.

Damage Processes of Polypropylene Fiber Reinforced Mortar in Different Fiber Content Revealed by Acoustic Emission Behavior

The performances of the cement-based materials can be improved by the incorporation of polypropylene fiber, but the damage processes become more complex with different fiber contents at the same time. The acoustic emission（AE） technology can achieve the global monitoring of internal damage in materials. The evolution process of failure mode and damage degree of polypropylene fiber reinforced mortar and concrete were analyzed by measuring the AE energy, RA value, AF value and b value. It was found that the cement matrix cracked on the initial stage, the cracks further developed on the medium stage and the fibers were pulled out on the last stage. The matrix cracked with minor injury cracks, but the fiber broke with serious damage cracks. The cumulative AE energy was proportional to the polypropylene fiber reinforced concrete and mortar＇s ductility. The damage mode and damage degree can be judged by identifying the damage stage obtained by the analysis of the AF value.

Tekcrete Fast~: Fiber-reinforced, rapid-setting sprayed concrete for rib and surface control

Fiber-reinforced spayed concrete has been used for several years in civil and tunneling operations.Research conducted to reduce cure times and increase compressive and flexural strengths resulted in the development of Tekcrete Fast~, a cementitious product capable of obtaining 41 MPa compressive strength and 8 MPa flexural strength in only 3 h and reaching 7 d strengths of 62 and 11.7 MPa, respectively.A single bag product that uses conventional shotcrete and gunite application systems makes it a natural crossover product for mining applications.The discovery of incredible adhesion properties and high resistance to chloride permeability helps ensure long-term stability and increases the ease of application.Project results from Disaster City~ in Texas and the application for rehabilitating a coal mine belt entry are presented.The case study illustrates the effectiveness of the product in stabilizing a coal mine beltway and adjacent cross-cuts that were subjected to progressive sloughage due to humidity and cyclical loading.

Cracking and Mechanical Properties of Airport Concrete Pavement with Fiber and Expansive Agent

Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties.The concrete specimens with amount content of polypropylene fiber or expansive agent or both of them are prepared.The morphology of specimens is observed by scanning electron microscope,the time when the first crack occurred is recorded through slap test,and the mechanical properties such as compressive strength and impact energies of concrete are measured.The results show that polypropylene fiber in concrete can reduce the shrinkage and delay the first crack,improve the impact resistance obviously,and improve the compressive strength slightly.Expansive agent can compensate the shrinkage and reduce cracks of concrete pavement markedly,and improve the mechanical properties of concrete pavement slightly.The study provides recommendations for cracking control of airport concrete pavement in the future.

Detection of Thermophysical Properties for High Strength Concrete after Exposure to High Temperature

Using the detection principle of infrared thermal imaging technique and the detection principle of DRH thermal conductivity tester laboratory,we investigated the infrared thermal image inspection,coefficient of thermal conductivity,apparent density,and compressive strength test on C80 high-strength concrete（HSC） in the presence and absence of polypropylene fibers under completely heated conditions.Only slight damages were detected below 400 ℃,whereas more and more severe deterioration events were expected when the temperature was above 500 ℃.The results show that the elevated temperature through infrared images generally exhibits an upward trend with increasing temperature,while the coefficient of thermal conductivity and apparent density decrease gradually.Additionally,the addition of polypropylene fibers with appropriate length,diameter,and quantity contributes to the improvement of the high-temperature resistance of HSC.

Performance Evaluation of One-Way Concrete Slabs Reinforced with New Developed GFRP Bars

The incorporation of fiber-reinforced-polymer (FRP) bars in construction as a replacement to steel bars provides a superior material which is capable to overcome corrosion problems. However, serviceability requirements are important issues to be considered in the design of concrete elements reinforced with glass-FRP (GFRP) bars which are known to have larger deflections and wider crack widths as well as weaker bond compared with steel reinforced concrete. As a solution to this problem, square GFRP bars are proposed. This paper presents the results of an experimental investigation that was performed, in which newly developed square and circular GFRP bars were fabricated in the lab. Also, the GFRP bars were tested and used to reinforce concrete slabs. A total of nine full-scale GFRP-reinforced concrete (RC) one-way slabs were constructed, tested and analyzed, considering the most influencing parameters such as the cross sectional shape of GFRP bars, reinforcement ratio, the concrete characteristics strength, and adding polypropylene fibers to the concrete mixture. The test results were showed that, the tested slabs with GFRP square bars improved the deflection and cracking behavior as well as the ultimate load.

细聚丙烯纤维混凝土介观离散力学模型及其Ⅰ型断裂强度负效应机理

细聚丙烯(PP,直径小于100μm)纤维混凝土Ⅰ型断裂强度随纤维含量增加呈现先增后减的变化规律,其机理尚不明晰。而且由于纤维数量过多,现有数值方法无法精细刻画细纤维混凝土力学行为。对此通过考虑细PP纤维亲水性提升基体局部水灰比的强度正效应和纤维桥接力强度贡献低于砂浆的强度负效应,并引入纤维直径等效系数(rf),实现介观尺度细聚丙烯纤维混凝土(PFRC)力学行为模拟。研究表明:纤维直径等效系数(rf)建议小于10;当纤维微量添加时,细PP纤维提升基体局部水灰比,使基体强度上升,此时正效应高于负效应;随着纤维含量增加,由于纤维桥接力贡献无法补偿相应面积基体强度,负效应持续增长,PFRC宏观Ⅰ型断裂强度下降。

多尺度聚丙烯纤维混凝土弯曲疲劳寿命试验及数值模拟

为研究多尺度聚丙烯纤维混凝土的弯曲疲劳性能,开展基准混凝土、聚丙烯粗纤维混凝土及多尺度聚丙烯纤维混凝土的静载试验及不同应力水平(0.75、0.80、0.85)下的弯曲疲劳试验,建立弯曲疲劳寿命方程,并结合ABAQUS与FE-SAFE软件建立纤维混凝土梁的三点弯曲疲劳有限元模型。结果表明:聚丙烯纤维的掺入,尤其是多尺度聚丙烯纤维混掺显著增强了混凝土基体的抗折、抗疲劳性能。双对数lgS-lgN疲劳方程能够较好地描述多尺度聚丙烯纤维混凝土的应力水平与疲劳寿命的相关性,使用lgS-lgN疲劳方程计算得到200万次循环荷载作用下多尺度聚丙烯纤维混凝土的疲劳强度最高,为3.91 MPa。三组试件疲劳寿命的数值模型预测值均介于实测疲劳寿命的最大值与最小值之间,并接近于疲劳寿命平均值,该模型为多尺度聚丙烯纤维混凝土的疲劳寿命预测提供了理论依据。

纤维-地聚物混凝土力学性能及耐久性能研究

为改善地聚物混凝土的力学性能和耐久性,通过掺入不同长度和掺量的聚丙烯纤维,对地聚物混凝土的力学性能、抗冻性、抗氯离子侵蚀性及抗裂性进行了研究,并基于SEM试验,从微观角度进一步解释聚丙烯纤维的作用机理.结果表明:聚丙烯纤维的掺入能够提高地聚物混凝土的力学性能和耐久性能,当纤维掺量为0%~0.6%时,随着纤维掺量的增加,地聚物混凝土的改善效果越明显.当掺量超过0.6%时,其力学性能和耐久性开始下降.通过SEM分析也表明,聚丙烯纤维能够提高基体内部的整体性和密实性,从而显著改善地聚物混凝土的力学性能和耐久性.最终推荐掺量0.6%长度为12 mm的聚丙烯纤维为最佳掺量.

聚丙烯纤维混凝土力学性能试验

为了探究不同类型、不同掺量的聚丙烯纤维对混凝土力学性能的作用效果,在混凝土材料中加入3种不同类型的聚丙烯纤维(波浪型聚丙烯纤维、压花型聚丙烯纤维、单丝型聚丙烯纤维),并分别使用不同掺量(0、0.08%、0.11%、0.14%、0.17%、0.20%)作为水平变量,对聚丙烯纤维试块进行抗压强度试验、劈裂抗拉强度试验、轴心抗压强度试验.研究发现:波浪型聚丙烯纤维掺量为0.17%时,混凝土抗压强度最佳;单丝型聚丙烯纤维掺量为0.20%时,混凝土的劈裂抗拉强度最佳;单丝型聚丙烯纤维掺量为0.17%时,对于混凝土的抗折强度有较好作用效果.

纤维对复合矿物掺合料混凝土强度影响的研究

采用单掺与正交的方法,研究了玄武岩纤维与聚丙烯纤维对混凝土7 d和28 d抗压强度的影响,分析了两种纤维分别提升混凝土强度的机理。结果表明,玄武岩纤维与聚丙烯纤维限制早期混凝土内部微裂缝的产生,二者最佳掺量分别为0.1%和0.15%,此时抗压强度相较于对照组,分别提升了13%和9.5%。正交实验得出三因素对混凝土抗压强度影响顺序依次是玄武岩纤维>矿物掺合料>聚丙烯纤维,此时正交实验最佳配合比为:粉煤灰∶矿渣=1∶1.25(球磨15 min),玄武岩纤维掺量0.125%,聚丙烯纤维掺量0.175%,28 d混凝土的抗压强度为68.6 MPa。