Biochar-Induced Priming Effects in Young and Old Poplar Plantation Soils

The priming effect(PE)induced by biochar provides a basis for evaluating its carbon(C)sequestration potential in soils.A 60 days’laboratory incubation was conducted,which involved the amendment of biochar(1%of soil mass)produced from rice straw at 300℃(B300)and 500℃(B500)to young(Y)and old(O)poplar plantation soils,with the aim of studying the responses of biochar-induced PEs to poplar plantation ages.This incubation included six treatments:Y+CK(control),Y+B300,Y+B500,O+CK,O+B300,and O+B500.Carbon dioxide(CO_(2))emissions were significantly increased(p<0.05)in the B300 amended soils,while it was decreased in the B500 amended soils compared to the CK.The primed CO_(2) emissions were 2.35 times higher in the Y+B300 than the O+B300 treatments,which was measured to be 18.6 and 5.56 mg C·kg^(-1) with relative PEs of 12.4%and 3.35%,respectively.However,there was little difference between the primed CO_(2) emissions in Y+B500 and O+B500 treatments,which were measured to be-24.9 and-29.6 mg·C·kg^(-1) with relative PEs of-16.6%and-17.8%,respectively.Dissolved organic carbon(DOC)was significantly lower in the young poplar plantation soil than that in the old poplar plantation soil regardless of biochar amendment throughout the incubation,indicating greater C-limit of soil microorganisms in the young poplar plantation soil.Using ^(13)C isotope tracing,neither B300 nor B500 decreased native soil-derived DOC,which indicated that the negative B500-induced PEs were not due to a reduction in the availability of native soil-derived C.In conclusion,the response of biochar-induced PEs to poplar plantation age depends on biochar types while soil available C indirectly affects biochar-induced PEs.Further studies should focus on how the interactive effects between soil C availability and microbial community impacts biochar-induced PEs.

Quantitative study of poplar plantations in three Iranian provinces

Fast growing poplar species enjoy a highly favored position in Iran’s forest product industries. However, information on poplar plantations, such as areas, growing stock and harvest volumes, are largely obtained by non scientific means and poorly executed methods. A few studies have been conducted to obtain data on the capacity of poplar plantations, their extent, existing growing stock, distribution and species choice in three provinces, i.e., Western Azerbaijan, Kurdistan and Hamedan, with relatively well developed management systems. We opted for a cluster method, a standard sampling method for conducting similar investigations, consisting of two phases. In the first phase we collected library information and conducted half-open interviews with villagers. In the second phase field measurements in the villages of these three provinces were carried out. Information from field measurements on growing stock, cultivated areas, dominant species were used to estimate volumes by way of volume and weight tables. Results obtained from the present study indicate that the average annual volume of timber harvested in the three provinces was 697,723 m3, with an average sampling error of 22.7 per cent. This annual volume of poplar timber harvested from the three provinces was estimated to amount to about 25 per cent of overall harvest; at that rate, the overall annual utilization potential of poplar plantations will be 10 million m3, which constitutes a reliable resource of raw timber for use in wood and paper industries.

A New Multistep Approach to Identify Leaf-Off Poplar Plantations Using Airborne Imagery

Identification of type of leafless trees using both fall imagery and field-based surveys is a global concern in the forest science community. Few studies were devoted to separate leafless trees from others in the growth season using remote sensing imagery. But this study was the first attempt to identify the type of leafless tree in the fall imagery. We investigated the potential of the Simple Linear Iterative Clustering (SLIC) and k-mean segmentation techniques, and texture and color image analyses to identify leafless poplar trees using imagery collected in a leaf-off season. For the first time in this study, the star shaped feature identifier was found through a binary image that was successful in identifying leaf-off poplar plantations. Optimal threshold values of Normalized Difference Vegetation Index (NDVI) and Normalized Green Index (NGI) indices were able to differentiate highly vegetated land, green farms, and gardens from the grasses that sometimes grow between poplar plantation lines. A Coefficient of Variation (CV) of red color intensity and histogram of value were also successful in separating bare soil and other land cover types. Imagery was processed and analyzed in a Matlab software. In this study, leafless poplar plantation was identified with a user accuracy of 84% and the overall accuracy was obtained 81.3%. This method provides a framework for identification of leafless poplar trees that may be beneficial for distinguishing other types of leafless trees.

The influences of biotic and abiotic factors on the occurrence and severity of poplar canker disease in Qingfeng County, China and the management implications

Landscape pathology is a research approach that can provide validation of the effectiveness of regional controls of forest disease at a landscape scale. In this paper, we analyzed the effects of stand features, management approaches, and geographical locations on poplar canker disease incidence （DI） and disease severity index （DSI） of individual trees at a 10 km x 10 km mesoscale landscape in Qingfeng County, China. DI varied significantly with stand age, tree densities, and the degree of canopy closure. DI in stands younger than 4 years old was significantly lower than that in the stands over 6 years old and reached the highest value at a stand age of 8-10 years. Overall, DI was positively correlated with stand age, stand density, andthe degree of canopy closure. DI was significantly lower in agro-forest stand patches than in other three patch types, i.e. isolated patch, pure stand patch, and mixed stand patch. Poplar plantations distributed around and near to villages exhibited significantly higher DI mainly due to human activities and herbivores. Fragmentation or connectivity in this mesoscale landscape seemed not impact disease occurrence. DSI was not significantly correlated with stand density, but varied significantly with tree varieties and trees ages. DSI was highest in stands of 10-12 year trees for all poplar varieties we studied here. Plantation density and plantation age were thus critical factors in determining DI and DSI. A logistic predictive model of disease occurrence was developed for the study area, considering varieties, age, height, density, canopy cover, stand types, patch types, management status, and stand geographical locations. Our study here shows that adjustment of stand density by thinning at different plantation ages is an effective approach controlling the occurrence canker disease in short-rotation poplar plantations at the landscape scale.

Photosynthetic response of poplar leaves at different developmental phases to environmental factors

With economic incentives and interests in fast-growing poplar trees for short-rotation production of fiber and veneer, many new poplar hybrids have been bred and planted in China, but how to match the new poplar clones to suitable sites and maintain their higher growth rates is still not very clear. In this study, the photosynthetic response of poplar leaves at various developmental stages during two seasons (summer and autumn) was explored and mechanistic models for the photosynthesis of poplar leaves at different developmental phases in response photosynthetic active radiation (PAR), temperature, and relatively humidity were established using the optimization software package 1st Opt. Mature poplar leaves in autumn had significantly higher photosynthetic capacity than leaves at other stages and seasons. Based on the models established for poplar leaves at different phases, the main limiting factors for photosynthesis at the research site were high PAR and temperature in the summer and low PAR in the autumn. Our results highlight the importance of selecting suitable sites, pruning and stand density control during the plantation development to maintain higher photosynthetic rates of poplar trees and to establish optimum cultivation patterns for various utilization of poplar plantations.

Natural Resistance of Two Plantation Woods Populus × canadensis cv. and Cunninghamia lanceolata to Decay Fungi and Termites

Natural durability of two plantation woods, Chinese fir and I-214 poplar, was investigated thoroughly by three test- ing methods, namely an accelerated laboratory decay test, a fungus cellar test and a field test. After the decay test using Postia pla- centa and Trametes versicolor, Chinese fir and the I-214 poplar showed 34% and 69% of mass loss, respectively, indicating they should be classified as slightly durable and non-durable wood. This conclusion was confirmed by the fungus cellar test and the field test. Like the performance in the decay test, I-214 poplar showed no resistance to termites either in the laboratory or in the field, whereas Chinese fir would be classified as moderately resistant.