Base Pressure Control with Semi-Circular Ribs at Critical Mach Number

When better fuel-air mixing in the combustion chamber or a reduction in base drag are required in vehicles,rockets,and aeroplanes,the base pressure control is activated.Controlling the base pressure and drag is necessary in both scenarios.In this work,semi-circular ribs with varying diameters(2,4,and 6 mm)positioned at six distinct positions(0.5D,1D,1.5D,2D,3D,and 4D)inside a square duct with a side of 15 mm are proposed as an efficient way to apply the passive control technique.In-depth research is done on optimising rib size for various rib sites.According to this study,the base pressure rises as rib height increases.Furthermore,the optimal location for the semi-circular ribs with a diameter of 2 mm is at 0.5D.The 1D location appears to be optimal for the 4 mm size as well.For the 6 mm size,however,the 4D position fills this function.

The Impact of Different Mining and Releasing Ratios on the Over-Support Pressure of Header Working Face

Through the theoretical analysis of overburden destabilization mechanism, FLAC 3D simplified plane numerical simulation method and field measurement method, we compared the relationship of overburden support pressure at 35 m of workface recovery, and the peak overburden support pressure decreased from 13.85 Mpa to 11.97 Mpa from 1:1 to 1:3. With the increase of mining ratio, the peak over-supporting pressure decreases: with the increase of top coal recovery thickness, the peak over-supporting pressure and the influence range will be further expanded, and the distance between the peak over-supporting pressure and the coal wall of the working face will be further increased and the high stress zone of the peak area will be expanded simultaneously.

Machine learning for pore-water pressure time-series prediction:Application of recurrent neural networks

Knowledge of pore-water pressure(PWP)variation is fundamental for slope stability.A precise prediction of PWP is difficult due to complex physical mechanisms and in situ natural variability.To explore the applicability and advantages of recurrent neural networks(RNNs)on PWP prediction,three variants of RNNs,i.e.,standard RNN,long short-term memory(LSTM)and gated recurrent unit(GRU)are adopted and compared with a traditional static artificial neural network(ANN),i.e.,multi-layer perceptron(MLP).Measurements of rainfall and PWP of representative piezometers from a fully instrumented natural slope in Hong Kong are used to establish the prediction models.The coefficient of determination(R^2)and root mean square error(RMSE)are used for model evaluations.The influence of input time series length on the model performance is investigated.The results reveal that MLP can provide acceptable performance but is not robust.The uncertainty bounds of RMSE of the MLP model range from 0.24 kPa to 1.12 k Pa for the selected two piezometers.The standard RNN can perform better but the robustness is slightly affected when there are significant time lags between PWP changes and rainfall.The GRU and LSTM models can provide more precise and robust predictions than the standard RNN.The effects of the hidden layer structure and the dropout technique are investigated.The single-layer GRU is accurate enough for PWP prediction,whereas a double-layer GRU brings extra time cost with little accuracy improvement.The dropout technique is essential to overfitting prevention and improvement of accuracy.

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper,the kerosene/air rotating detonation engines(RDE)are numerically investigated,and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation,instabilities,and propulsive performance.A hybrid MPI t OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC)systems.A series of cases with the total pressure of 1 MPa,1.5 MPa,2 MPa,and the equivalence ratio of 0.9,1,1.4 are simulated.On one hand,the total pressure shows a significant impact on the instabilities of rotating detonation waves.The instability phenomenon is observed in cases with low total pressure(1 MPa)and weakened with the increase of the total pressure.The total pressure has a small impact on the detonation wave velocity and the specific impulse.On the other hand,the equivalence ratio shows a negligible influence on the instabilities,while it affects the ignition process and accounts for the detonation velocity deficit.It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition.Little difference was observed in the thrust with different equivalence ratios of 0.9,1,and 1.4.The highest specific impulse was obtained in the lean fuel cases,which is around 2700 s.The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.

Prediction of Collapse Pressure of Submarine Pipelines in A Wide Range of Diameter–Thickness Ratio

Submarine pipelines play an important role in offshore oil and gas development.A touchy issue in pipeline design and application is how to avoid the local collapse of pipelines under external pressure.The pipe diameter-thickness ratio D/t is one of the key factors that determine the local critical collapse pressure of the submarine pipelines.Based on the pipeline collapse experiment and finite element simulation,this paper explores the pressure-bearing capacity of the pipeline under external pressure in a wide range of diameter-thickness ratio D/t.Some interesting and important phenomena have been observed and discussed.In the range of 16<D/t<80,both DNV specification and finite element simulation can predict the collapse pressure of pipeline quite well;in the range of 10<D/t<16,the DNV specification is conservative compared with the experimental results,while the finite element simulation results are slightly larger than the experimental results.Further parameter analysis shows that compared with thin-walled pipes,improving the material grade of thick-walled pipes has higher benefits,and for thin-walled pipes,the ovality f_(0)should be controlled even more.In addition,combining the results of finite element simulation and model experiment,an empirical formula of critical collapse pressure for thick-walled pipelines is proposed,which is used to correct the error of DNV specification in the range of 10<D/t<16.

The effect of high-pressure and high-temperature drying treatments on the deresination ratio of Pinus massoniana

This study investigated the possibility of using high-temperature and high-pressure schedules to treat Pinus massoniana wood in order to reduce its oil content. We discuss the effect of drying temperature, absolute pressure and the holding time on the deresination ratio in R massoniana wood and establish a model for the deresination ratio as a function of drying temperature, absolute pressure and holding time. The results show that the deresination ratio in- creased from 7.14% to 87.04% when the temperature increased from 150 to 200℃, the absolute pressure from 0.1 to 0.6 MPa and the holding time from 1 to 3 h. The optimal model for the deresination ratio （Y） with drying temperature （t）, absolute pressure （p） and holding time （r） is： Y = 0.284t ＋ 113.424p ＋ 3.518r - 42.486, with a coefficient of determina- tion （R2） of 0.930. Compared with drying temperature and holding time, absolute pressure plays the more significant role in the deresination process. This study could provide a theoretical basis to the practical production of R massoniana wood.

Multi-exponential model to describe pressure-dependent P-and S-wave velocities and its use to estimate the crack aspect ratio

We present new quantitative model describing the pressure dependence of acoustic P-and S-wave velocities.Assuming that a variety of individual mechanisms or defects(such as cracks,pore collapse and grain crushing)can contribute to the pressure-dependent change of the wave velocity,we order a characteristic pressure to all of them and allow a series of exponential terms in the description of the(Pand S-waves)velocity-pressure function.We estimate the parameters of the multi-exponential rock physical model in inversion procedures using laboratory measured P-and S-wave velocity data.As is known,the conventional damped least squares method gives acceptable results only when one or two individual mechanisms are assumed.Increasing the number of exponential terms leads to highly nonlinear ill-posed inverse problem.Due to this reason,we develop the spectral inversion method(SIM)in which the velocity amplitudes(the spectral lines in the characteristic pressure spectrum)are only considered as unknowns.The characteristic pressures(belonging to the velocity amplitudes)are excluded from the set of inversion unknowns,instead,they are defined in a set of fixed positions equidistantly distributed in the actual interval of the independent variable(pressure).Through this novel linear inversion method,we estimate the parameters of the multi-exponential rock physical model using laboratory measured P-and S-wave velocity data.The characteristic pressures are related to the closing pressures of cracks which are described by well-known rock mechanical relationships depending on the aspect ratio of elliptical cracks.This gives the possibility to estimate the aspect ratios in terms of the characteristic pressures.

Elastic deformation of ellipsoidal shell of different axis ratio under inner pressure

Discusses the elastic deformation of ellipsoidal shell of different axis ratio under inner pressure during hydraulic bulging forming with theoretical results in good agreement with actual result, thereby providing theoretical basis for hydraulic bulging forming of ellipsoidal shell.

An Experimental Study of Aspect Ratio on the Tensile Properties of an Elastic Fabric for Making-up of Pressure Garments

The“cut-and-sewn” pressure garments are normally tailored made in various sizes according to the size of human body as well as the area of burn wounds.When a tubular pressure garment is cut in different length and width measurements,different aspect ratio will be occurred on the elastic fabric for making up the pressuregarment. Many therapists in Hong Kong concerned the change of aspect ratio may affect the tensile properties of the elastic fabric and ultimately will affect the skin-and-garment interface pressure for the patient.The aim

Computation of compressible flows with high density ratio and pressure ratio

The WENO method, RKDG method, RKDG method with original ghost fluid method, and RKDG method with modified ghost fluid method are applied to singlemedium and two-medium air-air, air-liquid compressible flows with high density and pressure ratios： We also provide a numerical comparison and analysis for the above methods. Numerical results show that, compared with the other methods, the RKDG method with modified ghost fluid method can obtain high resolution results and the correct position of the shock, and the computed solutions are converged to the physical solutions as themesh is refined.

Predictive Value of Blood Pressure,Heart Rate,and Blood Pressure/Heart Rate Ratio in a Chinese Subpopulation with Vasovagal Syncope

Objective:The head-up tilt test(HUTT)is widely used but is time-consuming and not cost-effective to evaluate patients with vasovagal syncope(VVS).The present study aims to verify the hypothesis that ambulatory blood pressure(BP)monitoring(ABPM)and the simplistic tilt test may be potential alternatives to the HUTT.Methods:The study consecutively enrolled 360 patients who underwent the HUTT to evaluate VVS.BP),heart rate(HR),and BP/HR ratios derived from ABPM and the simplistic tilt test were evaluated to predict the presence,pattern,and stage of syncope during the HUTT.Results:Mixed response was the commonest pattern,and syncope occurred frequently with infusion of isoproterenol at a rate of 3μg/min.During the simplistic tilt test,the cardioinhibitory group had higher tilted BP/HR ratios than the vasodepressor group,while the vasodepressor group had a faster tilted HR and a larger HR difference than the cardioinhibitory group.The higher the BP/HR ratio in the tilted position,the higher the isoproterenol dosage needed to induce a positive response.During ABPM,BP/HR ratios were signifi cantly higher in the cardioinhibitory group than in the vasodepressor group.The higher the ABPM-derived BP,the higher the dosage of isoproterenol needed to induce syncope.There were signifi cant correlations in BP/HR ratios between ABPM and the supine position in the vasodepressor group,while signifi cant correlation was found only for the diastolic BP/HR ratio between ABPM and the tilted position in the cardioinhibitory group.The mixed pattern shared correlative features of the other two patterns.Conclusion:ABPM and the simplistic tilt test might be used as promising alternatives to the HUTT in VVS evaluation in clinical settings.

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive,an explosion device was developed and used to investigate the detonation pressure and temperature of R1(A16)aluminum powder and the aluminum powder particle gradation of R2(Al6+Al13),R3(Al6+Al24)and R4(Al6+AI flake)in a confined space.By using gas chromatography,quantitative analysis and calculations were carried out to analyze the gaseous detonation products.Finally,the reaction ratios of the aluminum powder and the explosion reaction equations were calculated.The results show that in a confined space,the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum.In vacuum,the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2,respectively.In air,the quasi-static pressures and equilibrium telperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3,respectively.R4(Al6+AI flake)and R3(Al6+A124)have relatively higher temperatures after detonation,which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by10.6%and 8.0%,respectively.In air,the reaction ratio of AI6 aluminum powder can reach as high as 78.16%,and the reaction ratio is slightly reduced after particle gradation.Finally,the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products,which provides a powerful basis for the study of RDX-based explosive reactions.

Evaluation of Inner Soil Pressure Acting on Opened Bottom Cylindrical Structure

An opened bottom cylinder is a large-diameter cylinder placed on a rubber base or embedded in a soil foundation. The settlement of such a cylinder differs greatly from that of a closed bottom cylinder and so does the distribution of inner soil pressure over the opened bottom cylindrical structure. Through investigation of the settlement and the inner soil pressure on the opened bottom cylinder by model experiments, the interactions among the filler inside the cylinder, subsoil and cylinder are analyzed. The adjusting mechanism of friction resistance between the inner filler and the wall of the cylinder during overturning of the cylinder is discussed. Based on the experimental study, a method for calculating the inner soil pressure on the cylindrical structure under axisymmetric loading or non- axisymmetric (with lateral) loading is proposed in this paper. Meanwhile, the effective anti-overturning ratio of the opened bottom cylinder is derived.

Numerical simulation on the pressure wave in a 30 mm electrothermal-chemical gun with the discharge rod plasma generator

An axisymmetric two-dimensional(2D)internal ballistic model including the transient burning rate law is used to simulate the 30mm electrothermal-chemical(ETC)launch with the discharge rod plasma generator(DRPG).The relationship between the pressure wave and the initial parameters,such as input electric power,discharging timing sequence,loading density and propellant web thickness,is researched through the change of initial parameters in the model.In the condition of synchronous discharging,the maximum of the pressure wave can be controlled while the ratio of the input electric energy to the propellant chemical energy(electric energy ratio)is less than 0.11.If the electric energy ratio is larger than 0.11,the maximum of the pressure wave increases rapidly with the electric energy ratio.With the increasing of the electric energy ratio,the change of the first negative amplitude value can be ignored.In the condition of timing sequence discharging,the allowed input electric energy ratio to control the pressure wave is proportional to the current pulse duration.At the high electric energy ratio,the maximum of the pressure wave is inverse proportional to the current pulse duration.The pressure wave increases with the increasing of the loading density.But the allowed electric energy ratio to control the pressure wave and the variation trend of the first negative amplitude wave value doesn't change.During the discharging of the DRPG,the influence of changing propellant web thickness in ETC launch can be ignored.

Prevalence and Correlates of Elevated Blood Pressure in Chinese Children Aged 6-13 Years: a Nationwide School-Based Survey

Objective To estimate the prevalence of elevated blood pressure（EBP） in Chinese children and identify individual and family factors associated with EBP. Methods A nationwide cross-sectional study was conducted in 2010 using stratified cluster sampling. Participants＇ blood pressure was measured, and their parents completed a questionnaire on personal and family characteristics. Prevalence and correlates of EBP were assessed. Results Among a total of 24,333 participants, 20.2% of boys and 16.3% of girls had EBP. The prevalence of EBP increased with the ascending trend of waist circumference, Waist-to-height ratio, and body mass index. The adjusted prevalence ratios（aP Rs） for obese boys and girls were 2.50 and 2.97, respectively. Fewer urban boys（16.2%） had EBP than rural boys（21.7%）. Boys with a family history of hypertension were 12% more likely to have EBP. Children whose mothers received a college education tended to have lower likelihood of EBP; with an aP R was 0.85 among boys and 0.78 among girls. Conclusion EBP is common among obese students and those who have a family history of hypertension. A negative association between mothers＇ education levels and EBP risk in children was found.

Influential factors of loess liquefaction and pore pressure development

The liquefaction of loess under dynamic loading is studied experimentally with a dynamic triaxial test system. The effects of over-consolidation ratio (OCR), saturation degree and the frequency of dynamic loading upon loess liquefaction are investigated. The development of pore pressure within loess samples is also discussed. Based on the experimental results, the empirical relationship between pore pressure ratio and loading cycle number ratio is established for normal consolidated saturated loess.

Seismic earth pressures on flexible cantilever retaining walls with deformable inclusions

In this study, the results of 1-g shaking table tests performed on small-scale flexible cantilever wallmodels retaining composite backfill made of a deformable geofoam inclusion and granular cohesionlessmaterial were presented. Two different polystyrene materials were utilized as deformable inclusions.Lateral dynamic earth pressures and wall displacements at different elevations of the retaining wallmodel were monitored during the tests. The earth pressures and displacements of the retaining wallswith deformable inclusions were compared with those of the models without geofoam inclusions.Comparisons indicated that geofoam panels of low stiffness installed against the retaining wall modelaffect displacement and dynamic lateral pressure profile along the wall height. Depending on the inclusioncharacteristics and the wall flexibility, up to 50% reduction in dynamic earth pressures wasobserved. The efficiency of load and displacement reduction decreased as the flexibility ratio of the wallmodel increased. On the other hand, dynamic load reduction efficiency of the deformable inclusionincreased as the amplitude and frequency ratio of the seismic excitation increased. Relative flexibility ofthe deformable layer （the thickness and the elastic stiffness of the polystyrene material） played animportant role in the amount of load reduction. Dynamic earth pressure coefficients were compared withthose calculated with an analytical approach. Pressure coefficients calculated with this method werefound to be in good agreement with the results of the tests performed on the wall model having lowflexibility ratio. It was observed that deformable inclusions reduce residual wall stresses observed at theend of seismic excitation thus contributing to the post-earthquake stability of the retaining wall. Thegraphs presented within this paper regarding the dynamic earth pressure coefficients versus the wallflexibility and inclusion characteristics may serve for the seismic design of full-scale retaining walls withdeformable polystyrene inclusions. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Relationship between intraocular pressure and parameters of obesity in ocular hypertension

AIM:To evaluate the correlation between intraocular pressure(IOP)and various obesity-related health factors in patients with ocular hypertension in Korea.METHODS:A total of 40850 subjects underwent age,sex,body weight,and height assessments and automated multiphasic tests,including non-contact tonometry,automated perimetry,fundus photography,systolic/diastolic blood pressure measurement,and evaluation of obesity-related health parameters such as obesity index,body mass index(BMI),a body shape index(ABSI),and waist-to-height ratio(WtHR).Subjects were divided into ocular hypertension group and normal IOP group according to IOP after matching of age and sex.RESULTS:Of 40850 participants,1515(3.7%)had ocular hypertension,and 1515 with normal IOP were selected as controls using propensity score matching.The mean IOP of control group was 15.3±2.3 mm Hg,compared with 23.3±1.6 mm Hg in ocular hypertension group.Height,obesity index,BMI,and WtHR in the ocular hypertension group were significantly higher than in the normal IOP group(P<0.001,P<0.001,P=0.009,P=0.002).IOP of ocular hypertension was positively correlated with obesity index(P=0.027)and BMI(P=0.016),whereas IOP of control was positively correlated with blood pressure(P<0.001,P=0.002),obesity index(P<0.001),BMI(P<0.001),and WHtR(P=0.002).Systolic blood pressure(β=0.022,P<0.001)and body weight(β=0.016,P=0.02)were precursors of IOP in normal subjects,but sex(male;β=-0.231,P=0.008)and obesity index(β=-0.007,P=0.017)were precursors of ocular hypertension according to multiple regression analysis.CONCLUSION:Among various obesity-related health parameters,obesity index is the best indicator for further increase in IOP in ocular hypertension group.

Coefficient of earth pressure at rest for normal,consolidated soils

In this study consecutive consolidated isotropically drained triaxial tests for the coefficient of earth pressure at rest(K_0) were carried out to investigate its rules of evolution as well as its strength characteristics for normal,consolidated saturated silt under high pressure.The tests results indicate that:1) for normal,consolidated saturated silt,K_0 values increase as the consolidation stress increases at high pressure levels,while the nonlinear characteristics of K_0 are inconspicuous compared to cohesive soils;2) the Jaky and Roscoe equations,used to calculate K_0,are only suitable for certain soils,but cannot represent these values for normal, consolidated saturated silt due to the variation in bilinear strength at high pressure;and 3) there are close relations between the nonlinear characteristics of K_0 and the void ratio,measured in the tests.Both share the same functional form while under pressure. Based on our experimental results,we developed an empirical linear model to interpret the rules of nonlinear variation for the coefficient of earth pressure at rest.

Characterizing pressure fluctuation into single-loop oscillating heat pipe

The pressure characteristics inside single loop oscillating heat pipe(OHP) having 4.5 mm inner diameter copper tube with the loop height of 440 mm were addressed.Distilled water was used as working fluid inside the OHP with different filling ratios of 40%,60% and 80% of total inside volume.Experimental results show that the thermal characteristics are significantly inter-related with pressure fluctuations as well as pressure frequency.And the pressure frequency also depends upon the evaporator temperature that is maintained in the range of 60?96 °C.Piezoresistive absolute pressure sensor(Model-Kistler 4045A5) was used to take data.The investigation shows that the filling ratio of 60% gives the highest inside pressure magnitude at maximum number of pressure frequency at any of set evaporator temperature and the lowest heat flow resistance is achieved at 60% filling ratio.