Porous alumina of regular spherical particles was fabricated with the spark plasma sintering （SPS） and then compared to those obtained through conventional hot pressing （HP）. The effects of the parameters of the h...Porous alumina of regular spherical particles was fabricated with the spark plasma sintering （SPS） and then compared to those obtained through conventional hot pressing （HP）. The effects of the parameters of the heating process on porosity were also investigated, Microstructural studies suggest that porous ingots including regular pores be made out of regular spherical alumina particles due to the close sphere packages. A comparative study on the relative necks of the specimens produced by SPS and HP indicates an enhancement of neck growth with SPS. Contrasting the theoretical values to the experimental results over the relative necks indicates that a proper relationship between the relative necks and the porosity can be established by a sintering model.展开更多
Significant energy saving effects can be made through the improvement of furnace refractories,especially the thermal insulation refractories. In this study,the preparation and the application of different alumina base...Significant energy saving effects can be made through the improvement of furnace refractories,especially the thermal insulation refractories. In this study,the preparation and the application of different alumina based porous ceramics were briefly introduced. Alumina based porous ceramics were prepared combined foaming method with gelcasting,sol- gel process or cement curing process. The influences of different preparation methods on the sintering shrinkage, porosity, phase composition, microstructure, compressive strength and thermal conductivity were discussed. Alumina based porous ceramics with relatively high strength and low thermal conductivity could be obtained through the above mentioned methods. Compared with the traditional lining materials,about 40% energy could be saved when they were used as the furnace wall.展开更多
Sea urchin spines were chosen as a model system for biomimetic ceramics obtained using starch-blended slip casting. Porous alumina ceramics with cap-shaped layers with different alternating porosities were found to ha...Sea urchin spines were chosen as a model system for biomimetic ceramics obtained using starch-blended slip casting. Porous alumina ceramics with cap-shaped layers with different alternating porosities were found to have superior fracture behavior under bulk compression compared to ceramics with uniform porosity.They fail in a cascading manner,absorbing high amounts of energy during extended compression paths.The porosity variation in an otherwise single phase material mimicks the architectural microstructure design of sea urchin spines of Heterocentrotus mammillatus,which are promising model materials for impact protection.展开更多
A green biocompatible foaming method utilizing natural coconut oil and cornstarch was developed to fabricate highly porous functional ceramics with controllable strengths and pore structures. The poros- ity of A1203 c...A green biocompatible foaming method utilizing natural coconut oil and cornstarch was developed to fabricate highly porous functional ceramics with controllable strengths and pore structures. The poros- ity of A1203 ceramics prepared via this method reached 79.6%-86.9% while these ceramics maintained high compressive strengths of 2.2-5.5 MPa. More importantly, porous A1203 ceramic with a pore size gra- dient was also readily fabricated by casting serial layers of foams that were set for different time periods. The potential applications of porous Al2O3 and HA ceramics fabricated by this green foaming method in- cluding scaffolds for oil cleaning and cell culture, respectively, were also demonstrated.展开更多
基金National Natural Science Foundation of China (50272047)Ministry of Education of China (704034)
文摘Porous alumina of regular spherical particles was fabricated with the spark plasma sintering （SPS） and then compared to those obtained through conventional hot pressing （HP）. The effects of the parameters of the heating process on porosity were also investigated, Microstructural studies suggest that porous ingots including regular pores be made out of regular spherical alumina particles due to the close sphere packages. A comparative study on the relative necks of the specimens produced by SPS and HP indicates an enhancement of neck growth with SPS. Contrasting the theoretical values to the experimental results over the relative necks indicates that a proper relationship between the relative necks and the porosity can be established by a sintering model.
基金Financial supports from the National Natural Science Foundation of China ( No. 51272240,51202225,51402265 )International S&T Cooperation Program of China ( No. 2014DFA50240)
文摘Significant energy saving effects can be made through the improvement of furnace refractories,especially the thermal insulation refractories. In this study,the preparation and the application of different alumina based porous ceramics were briefly introduced. Alumina based porous ceramics were prepared combined foaming method with gelcasting,sol- gel process or cement curing process. The influences of different preparation methods on the sintering shrinkage, porosity, phase composition, microstructure, compressive strength and thermal conductivity were discussed. Alumina based porous ceramics with relatively high strength and low thermal conductivity could be obtained through the above mentioned methods. Compared with the traditional lining materials,about 40% energy could be saved when they were used as the furnace wall.
基金funded by European sources within the ERASMUS-SOCRATES program
文摘Sea urchin spines were chosen as a model system for biomimetic ceramics obtained using starch-blended slip casting. Porous alumina ceramics with cap-shaped layers with different alternating porosities were found to have superior fracture behavior under bulk compression compared to ceramics with uniform porosity.They fail in a cascading manner,absorbing high amounts of energy during extended compression paths.The porosity variation in an otherwise single phase material mimicks the architectural microstructure design of sea urchin spines of Heterocentrotus mammillatus,which are promising model materials for impact protection.
基金Jiangsu Innovation and Entrepreneurship ProgramJiangsu Provincial Special Program of Medical Science (BL2012004)+3 种基金Jiangsu R&D Innovation Program (BY2014059-07)the Priority Academic Program Development of Jiangsu High Education Institutionsthe National Natural Science Foundation of China (No. 51472279)the Jiangsu Six Peak of Talents Program (2013-WSW-056) for financial supports
文摘A green biocompatible foaming method utilizing natural coconut oil and cornstarch was developed to fabricate highly porous functional ceramics with controllable strengths and pore structures. The poros- ity of A1203 ceramics prepared via this method reached 79.6%-86.9% while these ceramics maintained high compressive strengths of 2.2-5.5 MPa. More importantly, porous A1203 ceramic with a pore size gra- dient was also readily fabricated by casting serial layers of foams that were set for different time periods. The potential applications of porous Al2O3 and HA ceramics fabricated by this green foaming method in- cluding scaffolds for oil cleaning and cell culture, respectively, were also demonstrated.
