The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold...The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold bundle of the lower Yangtze Platform fold belt between the Dabie Orogenic Belt and the Jiangnan Massif. Analyses of the structural deformation characteristics of both the contact zone and the interior of the pluton are used to explain its emplacement mechanism. The foliation and lineation of the pluton, consisting of the oriented distribution of dark minerals and xenoliths, mainly concentrate along the margin of the pluton. Toward the center of the pluton, the foliation structure becomes weak, showing intense compression formation at the margin, and reflecting the conformable intrusion of the pluton. The relatively gentle lineation is evidence of a rotatory emplacement mechanism. Relatively steep marginal foliation reflects compression expanding. Affected by the thermal power of the pluton, the metamorphism of the contact zone has zonation. Both the strike of the axial plane of fold at the contact zone and that of the flow cleavage of the ductile shear zone are consistent with the boundary of the pluton, which reflects the speciality of conformable intrusion. The hinges of the folds are mostly inclined and erect, reflecting both the rotation of the pluton and its upward spiraling emplacement mechanism. Boudins developed in both the contact zone and the steep strata indicate the emplacement characteristic of the ballon expanding. The surrounding rock of the contact zone shortens horizontally. The average percentage of shortening is 39.7%, which further proves the mechanism of the pluton expanding, and the space occupied by the active expanding intrusion was provided by the shortening of the surrounding rock. The left-lateral shear shown by the ductile shear zone and the rheomorphic fold reveals that the pluton emplacement and the deformation of surrounding rock are controlled by a NNE-striking left-lateral shear stress field. These characteristics of pluton structures provide a mechanism of emplacement. In the deep, the pluton apirally rose left lateral, and in the shallow, the one forcefully emplaced balloningly.展开更多
Based on systematic analyses of 72 samples of different basic-ultrabasic rocks, the present paper discusses the relationship between melt structure and Cu and Au mineralization. It is found that if the NBO/T, NBO, M2+...Based on systematic analyses of 72 samples of different basic-ultrabasic rocks, the present paper discusses the relationship between melt structure and Cu and Au mineralization. It is found that if the NBO/T, NBO, M2+, FeO and MgO values are relatively high and the T, M3+, Fe2O3 and CaO values are low the basic-ultrabasic melt will be favourable to Cu (Ni) mineralization, but if the former are low and the latter are high it is favourable to Au metallization. Cu ions occupy dominantly octahedra in basic-ultrabasic melt and the higher the NBO/T, NBO and M2+ values, the more the octahedra in the melt. Au element mainly takes the form of Au+ ions in basic-ultrabasic melt and the Au+ ions constitute tetrahedral sites together with Fe3+ ions. Therefore, low M2+ and high Fe3+, i.e. high oxygen fu-gacity, can promote the enrichment of Au+ ions and Au mineralization. Components NT (other than Au+), Al2O3 and SiO2 in basic-ultrabasic melt have no effect on metallogenetic species. As mentioned above, in relevant diagrams distribution areas of the characteristic values of ore-free melt and those of ore-forming melt are overlapped in different degrees, which possibly indicates that not all the magmas have mineralizing ability. It can be well distinguished whether basic-ultrabasic rocks are favourable to Cu or Au mineralization or they are just ore-free rocks by analysing integrated diagrams of the characteristic values of the magmatic melt structure.展开更多
Ali Javad porphyry Cu-Au deposit is located 20 Km north of Ahar city in Arasbaran metallogenic zone which is considered as a part of Alp-Himalayan mineralization belt. Magmatism in this area began in Late Cretaceous, ...Ali Javad porphyry Cu-Au deposit is located 20 Km north of Ahar city in Arasbaran metallogenic zone which is considered as a part of Alp-Himalayan mineralization belt. Magmatism in this area began in Late Cretaceous, followed by extensive magmatism in Cenozoic and Quaternary periods. Porphyry type mineralization developed in Ali Javad quartz monzonitic porphyry stock and Eocene pyroclastic and volcanic country rocks. Ali Javad porphyry intrusion has shoshonitic nature and shows characteristics of volcanic arc granitoids that it is have been emplaced in a post-collision tectonic setting. Alteration zones at the deposit demonstrated zoning which is comparable with Lowel-Guilbert model proposed for quartz-monzonite type porphyry copper deposits. Phyllic, argillic, silicic and propylitic alteration zones were observed at the surface while potassic alteration zone could be observed at depth in drill core samples. Mineralization was recognized both as supergene and hypogene, the latter was as veins, veinlets and disseminations. Dominant hypogene minerals were chalcopyrite, bornite, molybdenite, pyrite and magnetite while chalcocite, covellite and limonite were dominant supergene minerals. Four mineralization zones were observed in the deposit as leached, transitional, supergene and hypogene zones. Average grades were 0.75% for copper and 1.86 ppm for gold with 81.5 Mt proved reserve for copper and 37.8 Mt for gold.展开更多
Four samples of plagioclase and biotite from the Shaxi porphyry in the lower part of the Yangtze metallogenic belt were analyzed for age determination with the ^40 Ar/^39Ar method. The results yield reproducible ages ...Four samples of plagioclase and biotite from the Shaxi porphyry in the lower part of the Yangtze metallogenic belt were analyzed for age determination with the ^40 Ar/^39Ar method. The results yield reproducible ages of 126 Ma to 135 Ma with a high level of confidence according to the agreement between isochron and plateau ages. The four Ar-Ar ages are relatively consistent within the analytical error. These ages are also consistent with, but more precise than, previous K-Ar and Rb-Sr ages and thus provide better constraints on the time of porphyry formation and associated Cu-Au mineralization along the middle to lower part of the Yangtze metallogenic belt. The ages of 126 to 135 Ma are interpreted to represent the intrusive time of the Shaxi porphyry, so that the Cu-Au mineralization should have occurred later due to the post-magmatic hydrothermal event.展开更多
The gold mineralization in the Longtoushan hydrothermal gold deposit is concentrated within the contact zone of the granitic complex. Whole rock geochemistry and in-situ U-Pb and Hf isotopic data were used to constrai...The gold mineralization in the Longtoushan hydrothermal gold deposit is concentrated within the contact zone of the granitic complex. Whole rock geochemistry and in-situ U-Pb and Hf isotopic data were used to constrain the genesis and age of the granites and related Cu-Au mineralization in the Longtoushan Deposit. The granites mainly consist of the granite porphyry, rhyolite porphyry, porphyritic granite and quartz porphyry. LA-ICP-MS U-Pb dating of zircons from the granite porphyry, rhyolite porphyry and quartz porphyry indicates that they intruded from ca. 94 to 97 Ma. These intrusions exhibit similar trace element characteristics, i.e., right-dipping REE patterns, depletion of Ba, Sr, P and Ti, and enrichment of Th, U, Nd, Zr and Hf. The εHf(t) values of zircons from the granite porphyry, rhyolite porphyry and quartz porphyry range from-26.81 to-8.19,-8.12 to-5.33, and-8.99 to-5.83, respectively, suggesting that they were mainly derived from the partial melting of the Proterozoic crust. The Cu-Au mineralization is mainly related to the rhyolite porphyry and porphyritic granite, respectively. The Longtoushan granites were most likely formed in a post-collisional extensional environment, and the deposit is a part of the Late Yanshanian magmatism related mineralization in the Dayaoshan area and its adjacent areas.展开更多
基金the Major State Basic Research Program(No.G1999043206)the Project of National Natrual Science Foundation of China(No.40372050) the Project of Resources Assessment of the China Geological Survey(No.200310200064).
文摘The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold bundle of the lower Yangtze Platform fold belt between the Dabie Orogenic Belt and the Jiangnan Massif. Analyses of the structural deformation characteristics of both the contact zone and the interior of the pluton are used to explain its emplacement mechanism. The foliation and lineation of the pluton, consisting of the oriented distribution of dark minerals and xenoliths, mainly concentrate along the margin of the pluton. Toward the center of the pluton, the foliation structure becomes weak, showing intense compression formation at the margin, and reflecting the conformable intrusion of the pluton. The relatively gentle lineation is evidence of a rotatory emplacement mechanism. Relatively steep marginal foliation reflects compression expanding. Affected by the thermal power of the pluton, the metamorphism of the contact zone has zonation. Both the strike of the axial plane of fold at the contact zone and that of the flow cleavage of the ductile shear zone are consistent with the boundary of the pluton, which reflects the speciality of conformable intrusion. The hinges of the folds are mostly inclined and erect, reflecting both the rotation of the pluton and its upward spiraling emplacement mechanism. Boudins developed in both the contact zone and the steep strata indicate the emplacement characteristic of the ballon expanding. The surrounding rock of the contact zone shortens horizontally. The average percentage of shortening is 39.7%, which further proves the mechanism of the pluton expanding, and the space occupied by the active expanding intrusion was provided by the shortening of the surrounding rock. The left-lateral shear shown by the ductile shear zone and the rheomorphic fold reveals that the pluton emplacement and the deformation of surrounding rock are controlled by a NNE-striking left-lateral shear stress field. These characteristics of pluton structures provide a mechanism of emplacement. In the deep, the pluton apirally rose left lateral, and in the shallow, the one forcefully emplaced balloningly.
文摘Based on systematic analyses of 72 samples of different basic-ultrabasic rocks, the present paper discusses the relationship between melt structure and Cu and Au mineralization. It is found that if the NBO/T, NBO, M2+, FeO and MgO values are relatively high and the T, M3+, Fe2O3 and CaO values are low the basic-ultrabasic melt will be favourable to Cu (Ni) mineralization, but if the former are low and the latter are high it is favourable to Au metallization. Cu ions occupy dominantly octahedra in basic-ultrabasic melt and the higher the NBO/T, NBO and M2+ values, the more the octahedra in the melt. Au element mainly takes the form of Au+ ions in basic-ultrabasic melt and the Au+ ions constitute tetrahedral sites together with Fe3+ ions. Therefore, low M2+ and high Fe3+, i.e. high oxygen fu-gacity, can promote the enrichment of Au+ ions and Au mineralization. Components NT (other than Au+), Al2O3 and SiO2 in basic-ultrabasic melt have no effect on metallogenetic species. As mentioned above, in relevant diagrams distribution areas of the characteristic values of ore-free melt and those of ore-forming melt are overlapped in different degrees, which possibly indicates that not all the magmas have mineralizing ability. It can be well distinguished whether basic-ultrabasic rocks are favourable to Cu or Au mineralization or they are just ore-free rocks by analysing integrated diagrams of the characteristic values of the magmatic melt structure.
文摘Ali Javad porphyry Cu-Au deposit is located 20 Km north of Ahar city in Arasbaran metallogenic zone which is considered as a part of Alp-Himalayan mineralization belt. Magmatism in this area began in Late Cretaceous, followed by extensive magmatism in Cenozoic and Quaternary periods. Porphyry type mineralization developed in Ali Javad quartz monzonitic porphyry stock and Eocene pyroclastic and volcanic country rocks. Ali Javad porphyry intrusion has shoshonitic nature and shows characteristics of volcanic arc granitoids that it is have been emplaced in a post-collision tectonic setting. Alteration zones at the deposit demonstrated zoning which is comparable with Lowel-Guilbert model proposed for quartz-monzonite type porphyry copper deposits. Phyllic, argillic, silicic and propylitic alteration zones were observed at the surface while potassic alteration zone could be observed at depth in drill core samples. Mineralization was recognized both as supergene and hypogene, the latter was as veins, veinlets and disseminations. Dominant hypogene minerals were chalcopyrite, bornite, molybdenite, pyrite and magnetite while chalcocite, covellite and limonite were dominant supergene minerals. Four mineralization zones were observed in the deposit as leached, transitional, supergene and hypogene zones. Average grades were 0.75% for copper and 1.86 ppm for gold with 81.5 Mt proved reserve for copper and 37.8 Mt for gold.
基金This study is supported by funds from the Ministry of Science and Technology of China (2006CB403500) ; National Natural Science Foundation of China (40473021).
文摘Four samples of plagioclase and biotite from the Shaxi porphyry in the lower part of the Yangtze metallogenic belt were analyzed for age determination with the ^40 Ar/^39Ar method. The results yield reproducible ages of 126 Ma to 135 Ma with a high level of confidence according to the agreement between isochron and plateau ages. The four Ar-Ar ages are relatively consistent within the analytical error. These ages are also consistent with, but more precise than, previous K-Ar and Rb-Sr ages and thus provide better constraints on the time of porphyry formation and associated Cu-Au mineralization along the middle to lower part of the Yangtze metallogenic belt. The ages of 126 to 135 Ma are interpreted to represent the intrusive time of the Shaxi porphyry, so that the Cu-Au mineralization should have occurred later due to the post-magmatic hydrothermal event.
基金supported by the Project of Innovationdriven Plan in Central South University (No. 2015CX008)the Fundamental Reserch Funds for the Central Universities of Central South University (No. 2015zzts071)
文摘The gold mineralization in the Longtoushan hydrothermal gold deposit is concentrated within the contact zone of the granitic complex. Whole rock geochemistry and in-situ U-Pb and Hf isotopic data were used to constrain the genesis and age of the granites and related Cu-Au mineralization in the Longtoushan Deposit. The granites mainly consist of the granite porphyry, rhyolite porphyry, porphyritic granite and quartz porphyry. LA-ICP-MS U-Pb dating of zircons from the granite porphyry, rhyolite porphyry and quartz porphyry indicates that they intruded from ca. 94 to 97 Ma. These intrusions exhibit similar trace element characteristics, i.e., right-dipping REE patterns, depletion of Ba, Sr, P and Ti, and enrichment of Th, U, Nd, Zr and Hf. The εHf(t) values of zircons from the granite porphyry, rhyolite porphyry and quartz porphyry range from-26.81 to-8.19,-8.12 to-5.33, and-8.99 to-5.83, respectively, suggesting that they were mainly derived from the partial melting of the Proterozoic crust. The Cu-Au mineralization is mainly related to the rhyolite porphyry and porphyritic granite, respectively. The Longtoushan granites were most likely formed in a post-collisional extensional environment, and the deposit is a part of the Late Yanshanian magmatism related mineralization in the Dayaoshan area and its adjacent areas.