Y^3＋-doped （Bi 1/2 Na 1/2） TiO 3-CaTiO 3-BaTiO 3 （BNCBT） positive temperature coefficient of resistivity （PTCR） ceramics sintered in air atmosphere were investigated in this study. （Bi 1/2 Na 1/2） TiO 3 （BNT...Y^3＋-doped （Bi 1/2 Na 1/2） TiO 3-CaTiO 3-BaTiO 3 （BNCBT） positive temperature coefficient of resistivity （PTCR） ceramics sintered in air atmosphere were investigated in this study. （Bi 1/2 Na 1/2） TiO 3 （BNT） component can remarkably increase the onset temperature T c of PTCR ceramics with the expense of the resistivity R 25 increase. CaTiO 3 （9–27 mol%） component can decrease the resistivity, and adjust the effects of BNT phase on the T c point. For the sample containing 3 mol% CaTiO 3 , T c raises from 122 ℃ to 153 ℃ when only 0.6 mol% BNT added, while for the ones with higher CaTiO 3 content （9–27 mol%）, T c is only increased by a rate of 8–9℃/1.0 mol% BNT. The effects of BNT and CaTiO 3 components on R25/Rmin （negative temperature coefficient effect） are also discussed.展开更多
High-density polyethylene/carbon black foaming conductive composites were prepared from acetylene black（ACEY） and super conductive carbon black（HG-1P） as conductive filler, low-density polyethylene（LDPE） as the ...High-density polyethylene/carbon black foaming conductive composites were prepared from acetylene black（ACEY） and super conductive carbon black（HG-1P） as conductive filler, low-density polyethylene（LDPE） as the second component, ethylene-vinyl acetate（EVA） and ethylene propylene rubber（EPR） as the third component, azobisformamide（AC） as foamer, and dicumyl peroxide（DCP） as cross-linker. The structure and resistivity-temperature behavior of high-density polyethylene（HDPE）/CB foaming conductive composites were investigated. Influences of carbon black, LDPE, EVA, EPR, AC, and DCP on the foaming performance and resistivity-temperature behavior of HDPE/CB foaming conductive composites were also studied. The results reveal that HDPE/CB foaming conductive composite exhibits better switching characteristic; ACET-filled HDPE foaming conductive composite displays better positive temperature coefficient（PYC） effect; whereas super conductive carbon black（HG-1P）-filled HDPE foaming conductive composite shows better negative temperature coefficient（NTC） effect.展开更多
The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistiv...The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.展开更多
As a temperature self-regulating heater material, the doped BaTiO_3 exhibits an attractive application perspective in the thermal management of electrical devices. However, the high Curie temperature does not meet the...As a temperature self-regulating heater material, the doped BaTiO_3 exhibits an attractive application perspective in the thermal management of electrical devices. However, the high Curie temperature does not meet the requirement in the thermal control application. In this work,(Ba_(0.997-x)Ce_(0.003)Sr_x)(TiNb_(0.002))O_3(x=0.2, 0.3, 0.35, abbreviated as BCSTNs) ceramics were prepared by the solid-state reaction method. The purpose of doping different content of strontium is to shift the Curie temperature of BaTiO_3-based ceramic to the ambient temperature region, maintaining excellent PT_C effect and low room-temperature resistivity by codoped cation ions in Ba-and Ti-site. The influences of sintering temperature and soak time on the microstructure as well as electrical properties of BCSTNs ceramics have been studied. The X-ray diffraction reveals that the composition with x=0.35 exhibits the coexistence of tetragonal and cubic lattice symmetries, confirmed by the Rietveld structure refinement. The dense microstructure with average grain sizes 0.84–7.87 μm was observed for BCSTN ceramics. Temperature-resistivity measurements demonstrate that T_C of the ceramics with x=0.35 shifted to the room temperature region. Additionally, the BCSTN ceramic with heavy doping Sr exhibits relative low room-temperature resistivity and the resistance jump greater than 2.0 orders of magnitude.展开更多
Conductive polyvinylidene fluoride（PVDF）matrix composites filled with graphited fiber（GF）or carbon fiber（CF）were prepared by the melt-mixing method.The breakage and length distribution of the fibers in the polym...Conductive polyvinylidene fluoride（PVDF）matrix composites filled with graphited fiber（GF）or carbon fiber（CF）were prepared by the melt-mixing method.The breakage and length distribution of the fibers in the polymer matrix were studied by scanning electron microscope（SEM）and optical microscope（OM）observations,respectively. The differences in the positive temperature coefficient（PTC）effects of the composites were mainly attributed to inter-fiber contact ability.The elimination of the negative temperature coefficient（NTC）effect for CF/PVDF composite was because of an increase in the viscosity of the polymer matrix.With the same filler content,CF could be more effective,to eliminate the NTC effect when compared with GF.Addition of 2%CF（mass fraction）in the PVDF composite with 7%GF（mass fraction）could effectively eliminate the NTC phenomenon of the composite.展开更多
The relationship of electrical properties of Mn-doped Ba_(0.92)Ca_(0.08)TiO_3PTCR (positive temperature coefficient resistance) ceramics with two sintering schedules wasdiscussed. Using TEM (transmission electron micr...The relationship of electrical properties of Mn-doped Ba_(0.92)Ca_(0.08)TiO_3PTCR (positive temperature coefficient resistance) ceramics with two sintering schedules wasdiscussed. Using TEM (transmission electron microscope) combined with EDS (energy dispersive X-rayspectrometer), the Mn ions distributed at grain boundaries were analyzed. The results show that thePTCR effect of Mn-doped PTCR ceramics is more dependent on the sintering schedule than those of Mnfree. The phenomenon may be caused by the valence states variance of Mn ions segregated at the grainboundaries.展开更多
The dispersing process of polyacenic semiconductor(PAS) in polyethylene(PE) was simulated by using molecular dynamics(MD) methods. The results show that this process can be divided into three stages. In the first stag...The dispersing process of polyacenic semiconductor(PAS) in polyethylene(PE) was simulated by using molecular dynamics(MD) methods. The results show that this process can be divided into three stages. In the first stage, PAS particles in the crystal region of PE are expelled to the amorphous region; in the second stage, PAS particles aggregate due to small surface areas and PE chains are adjusted continuously, which makes the crystal region complete; PAS particles are separated from each other and the total energy increases in the third stage. During the whole dispersing process, PAS particles are more stable in the amorphous region than in the crystal region. All the simulation results are in good agreement with the experimental results.展开更多
By means of ultrasonic dispersion, carbon nanofibers reinforced epoxy resin composite was prepared in the lab, the electrical conductivity of composite with different carbon nanofibers loadings were studied, also the ...By means of ultrasonic dispersion, carbon nanofibers reinforced epoxy resin composite was prepared in the lab, the electrical conductivity of composite with different carbon nanofibers loadings were studied, also the voltage-current relationship, resistance-temperature properties and mechano-electric effect were investigated. Results show that the resistivity of composite decreases in geometric progression with the increasing of carbon nanofibers, and the threshold ranges between 0.1 wt%-0.2 wt%. The voltage-current relationship is in good conformity with the Ohm＇s law, both positive temperature coefficient and negative temperature coefficient can be found at elevated temperature. In the course of stretching, the electrical resistance of the composites increases with the stress steadily and changes sharply near the breaking point, which is of importance for the safety monitor and structure health diagnosis.展开更多
The green sheets with Ni paste as inner electrodes were sintered at 1 320 ℃ for 1 h under a N2/H2 mixing gas at an oxygen partial pressure p(O2)=10-8-10-12 MPa, and then reoxided at 900-1 000 ℃ to form multilayer po...The green sheets with Ni paste as inner electrodes were sintered at 1 320 ℃ for 1 h under a N2/H2 mixing gas at an oxygen partial pressure p(O2)=10-8-10-12 MPa, and then reoxided at 900-1 000 ℃ to form multilayer positive temperature coefficient of resistance(PTCR). During the experiments, electronic characteristic effects of PTC with different thicknesses were contrasted. A certain extending of Ni diffusion is beneficial to the ohmic contact of multilayer PTCR but excessive diffusion is harmful to PTCR. The diffusion was studied by scanning electron microscopy(SEM) and energy-dispersive X-ray spectrometry(EDS). Inter-diffusion of element takes place along the Ni-BaTiO3 interface, especially Ni diffusion to BaTiO3 dominated the process. Furthermore, the degree of Ni diffusion is very severe as ceramic layers are very thin.展开更多
Vinylester （bismethacryloxy derivative with glass-carbon hybrid fibers （CF-GF） weight fraction of a bisphenol-A type EP resin, VE） composites of 50%, were prepared by the compress molding method. The distribution ...Vinylester （bismethacryloxy derivative with glass-carbon hybrid fibers （CF-GF） weight fraction of a bisphenol-A type EP resin, VE） composites of 50%, were prepared by the compress molding method. The distribution of carbon fiber in the hybrids was observed by stereomicroscope. The electrical resistance behavior of the composites filled with different carbon fiber （CF） weight contents （0.5% to 20%） was studied. The experimental results show that the electrical resistance behaviors of CF-GF/VE composites are different with those of CF/VE composites because carbon fibers＇ conducting networks are broken by the glass fibers in the CF-GF/VE composites. The carbon fibers distribute uniformly in the networks of glass fibers （GF） like single silk and form the semi-continuous conducting networks. Composite filled with GF-CF hybrid has a higher percolation threshold than that filled with pure CF. At that time, the resistivity of CF-GF/VE composites varies little with the temperature increasing. The temperature coefficient of resistivity in GF-CF/VE composite is less than 317 ppm and the variation of the resistivity after ten thermal cycles from 20℃ to 240 ℃is less than 1.96%.展开更多
基金Project supported by the SPAT of Shanghai Committee of Chinese People's Political Consultative Conference and Shanghai Education Development Foundation (Grant No.2008012)
文摘Y^3＋-doped （Bi 1/2 Na 1/2） TiO 3-CaTiO 3-BaTiO 3 （BNCBT） positive temperature coefficient of resistivity （PTCR） ceramics sintered in air atmosphere were investigated in this study. （Bi 1/2 Na 1/2） TiO 3 （BNT） component can remarkably increase the onset temperature T c of PTCR ceramics with the expense of the resistivity R 25 increase. CaTiO 3 （9–27 mol%） component can decrease the resistivity, and adjust the effects of BNT phase on the T c point. For the sample containing 3 mol% CaTiO 3 , T c raises from 122 ℃ to 153 ℃ when only 0.6 mol% BNT added, while for the ones with higher CaTiO 3 content （9–27 mol%）, T c is only increased by a rate of 8–9℃/1.0 mol% BNT. The effects of BNT and CaTiO 3 components on R25/Rmin （negative temperature coefficient effect） are also discussed.
文摘High-density polyethylene/carbon black foaming conductive composites were prepared from acetylene black（ACEY） and super conductive carbon black（HG-1P） as conductive filler, low-density polyethylene（LDPE） as the second component, ethylene-vinyl acetate（EVA） and ethylene propylene rubber（EPR） as the third component, azobisformamide（AC） as foamer, and dicumyl peroxide（DCP） as cross-linker. The structure and resistivity-temperature behavior of high-density polyethylene（HDPE）/CB foaming conductive composites were investigated. Influences of carbon black, LDPE, EVA, EPR, AC, and DCP on the foaming performance and resistivity-temperature behavior of HDPE/CB foaming conductive composites were also studied. The results reveal that HDPE/CB foaming conductive composite exhibits better switching characteristic; ACET-filled HDPE foaming conductive composite displays better positive temperature coefficient（PYC） effect; whereas super conductive carbon black（HG-1P）-filled HDPE foaming conductive composite shows better negative temperature coefficient（NTC） effect.
基金Funded by the National Natural Science Foundation of China(No.51178348)
文摘The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.
基金supported by the National Natural Science Foundation of China(Grant No.51225602)
文摘As a temperature self-regulating heater material, the doped BaTiO_3 exhibits an attractive application perspective in the thermal management of electrical devices. However, the high Curie temperature does not meet the requirement in the thermal control application. In this work,(Ba_(0.997-x)Ce_(0.003)Sr_x)(TiNb_(0.002))O_3(x=0.2, 0.3, 0.35, abbreviated as BCSTNs) ceramics were prepared by the solid-state reaction method. The purpose of doping different content of strontium is to shift the Curie temperature of BaTiO_3-based ceramic to the ambient temperature region, maintaining excellent PT_C effect and low room-temperature resistivity by codoped cation ions in Ba-and Ti-site. The influences of sintering temperature and soak time on the microstructure as well as electrical properties of BCSTNs ceramics have been studied. The X-ray diffraction reveals that the composition with x=0.35 exhibits the coexistence of tetragonal and cubic lattice symmetries, confirmed by the Rietveld structure refinement. The dense microstructure with average grain sizes 0.84–7.87 μm was observed for BCSTN ceramics. Temperature-resistivity measurements demonstrate that T_C of the ceramics with x=0.35 shifted to the room temperature region. Additionally, the BCSTN ceramic with heavy doping Sr exhibits relative low room-temperature resistivity and the resistance jump greater than 2.0 orders of magnitude.
基金the National Natural Science Foundation of China(Nos.20771030 and 20671025).
文摘Conductive polyvinylidene fluoride（PVDF）matrix composites filled with graphited fiber（GF）or carbon fiber（CF）were prepared by the melt-mixing method.The breakage and length distribution of the fibers in the polymer matrix were studied by scanning electron microscope（SEM）and optical microscope（OM）observations,respectively. The differences in the positive temperature coefficient（PTC）effects of the composites were mainly attributed to inter-fiber contact ability.The elimination of the negative temperature coefficient（NTC）effect for CF/PVDF composite was because of an increase in the viscosity of the polymer matrix.With the same filler content,CF could be more effective,to eliminate the NTC effect when compared with GF.Addition of 2%CF（mass fraction）in the PVDF composite with 7%GF（mass fraction）could effectively eliminate the NTC phenomenon of the composite.
基金This work is financially supported by the Postdoctoral Research Foundation of the Chinese Education Ministry (No. 023202238)
文摘The relationship of electrical properties of Mn-doped Ba_(0.92)Ca_(0.08)TiO_3PTCR (positive temperature coefficient resistance) ceramics with two sintering schedules wasdiscussed. Using TEM (transmission electron microscope) combined with EDS (energy dispersive X-rayspectrometer), the Mn ions distributed at grain boundaries were analyzed. The results show that thePTCR effect of Mn-doped PTCR ceramics is more dependent on the sintering schedule than those of Mnfree. The phenomenon may be caused by the valence states variance of Mn ions segregated at the grainboundaries.
文摘The dispersing process of polyacenic semiconductor(PAS) in polyethylene(PE) was simulated by using molecular dynamics(MD) methods. The results show that this process can be divided into three stages. In the first stage, PAS particles in the crystal region of PE are expelled to the amorphous region; in the second stage, PAS particles aggregate due to small surface areas and PE chains are adjusted continuously, which makes the crystal region complete; PAS particles are separated from each other and the total energy increases in the third stage. During the whole dispersing process, PAS particles are more stable in the amorphous region than in the crystal region. All the simulation results are in good agreement with the experimental results.
基金the Natural Science Fundation of Hubei Province(No.2005ABA010)
文摘By means of ultrasonic dispersion, carbon nanofibers reinforced epoxy resin composite was prepared in the lab, the electrical conductivity of composite with different carbon nanofibers loadings were studied, also the voltage-current relationship, resistance-temperature properties and mechano-electric effect were investigated. Results show that the resistivity of composite decreases in geometric progression with the increasing of carbon nanofibers, and the threshold ranges between 0.1 wt%-0.2 wt%. The voltage-current relationship is in good conformity with the Ohm＇s law, both positive temperature coefficient and negative temperature coefficient can be found at elevated temperature. In the course of stretching, the electrical resistance of the composites increases with the stress steadily and changes sharply near the breaking point, which is of importance for the safety monitor and structure health diagnosis.
基金Project(60676050) supported by the National Natural Science of ChinaProject(2007TY10) supported by the School of Physics and Electronic Technology and Key Laboratory of Ferroelectric and Piezoelectric Materials and Devices of Hubei Province, China
文摘The green sheets with Ni paste as inner electrodes were sintered at 1 320 ℃ for 1 h under a N2/H2 mixing gas at an oxygen partial pressure p(O2)=10-8-10-12 MPa, and then reoxided at 900-1 000 ℃ to form multilayer positive temperature coefficient of resistance(PTCR). During the experiments, electronic characteristic effects of PTC with different thicknesses were contrasted. A certain extending of Ni diffusion is beneficial to the ohmic contact of multilayer PTCR but excessive diffusion is harmful to PTCR. The diffusion was studied by scanning electron microscopy(SEM) and energy-dispersive X-ray spectrometry(EDS). Inter-diffusion of element takes place along the Ni-BaTiO3 interface, especially Ni diffusion to BaTiO3 dominated the process. Furthermore, the degree of Ni diffusion is very severe as ceramic layers are very thin.
基金Funded by the Natural Science Foundation of Hubei Province (No.2007ABA028)
文摘Vinylester （bismethacryloxy derivative with glass-carbon hybrid fibers （CF-GF） weight fraction of a bisphenol-A type EP resin, VE） composites of 50%, were prepared by the compress molding method. The distribution of carbon fiber in the hybrids was observed by stereomicroscope. The electrical resistance behavior of the composites filled with different carbon fiber （CF） weight contents （0.5% to 20%） was studied. The experimental results show that the electrical resistance behaviors of CF-GF/VE composites are different with those of CF/VE composites because carbon fibers＇ conducting networks are broken by the glass fibers in the CF-GF/VE composites. The carbon fibers distribute uniformly in the networks of glass fibers （GF） like single silk and form the semi-continuous conducting networks. Composite filled with GF-CF hybrid has a higher percolation threshold than that filled with pure CF. At that time, the resistivity of CF-GF/VE composites varies little with the temperature increasing. The temperature coefficient of resistivity in GF-CF/VE composite is less than 317 ppm and the variation of the resistivity after ten thermal cycles from 20℃ to 240 ℃is less than 1.96%.
