Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent years.Bamboo fibers are renowned for their good mechanical properties,abundance,and short cycle growth.As beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic foundation.Three different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the thickness.The elastic properties of the composite are determined with the law of mixture.Employing Hamilton’s principle,the governing equations of motion are obtained.The generalized differential quadrature method(GDQM)is then applied to the equations to obtain the results.The achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam change.Furthermore,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber distribution.Eventually,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

VARIATIONAL PRINCIPLES OF PERFORATED THIN PLATES AND FINITE ELEMENT METHOD FOR BUCKLING AND POST-BUCKLING ANALYSIS

On the basis of the general theory of perforated thin plates under large deflections, variational principles with deflection w and stress function F as variables are stated in detail.Based on these princi- ples,finite element method is established for analysing the buckling and post-buckling of perforated thin plates. It is found that the property of element is very complicated,owing to the multiple connexity of the region.

LOCALIZED ANALYSIS OF THIN-WALLED STRUCTURE’S BUCKLING/INITIAL POST-BUCKLING AND ITS ACCURACY

A method of localization is proposed to lower the high order of equations in FEM calcula- tion for the stability of a complex thin-walled structure.The localized analysis enables us to obtain both the upper and lower limits for the bifurcating point in a whole linear elastic structural system,as well as an ap- proximate solution to asymptotic post-buckling problem.Some numerical examples are included.

A non-probabilistic reliability topology optimization method based on aggregation function and matrix multiplication considering buckling response constraints

A non-probabilistic reliability topology optimization method is proposed based on the aggregation function and matrix multiplication.The expression of the geometric stiffness matrix is derived,the finite element linear buckling analysis is conducted,and the sensitivity solution of the linear buckling factor is achieved.For a specific problem in linear buckling topology optimization,a Heaviside projection function based on the exponential smooth growth is developed to eliminate the gray cells.The aggregation function method is used to consider the high-order eigenvalues,so as to obtain continuous sensitivity information and refined structural design.With cyclic matrix programming,a fast topology optimization method that can be used to efficiently obtain the unit assembly and sensitivity solution is conducted.To maximize the buckling load,under the constraint of the given buckling load,two types of topological optimization columns are constructed.The variable density method is used to achieve the topology optimization solution along with the moving asymptote optimization algorithm.The vertex method and the matching point method are used to carry out an uncertainty propagation analysis,and the non-probability reliability topology optimization method considering buckling responses is developed based on the transformation of non-probability reliability indices based on the characteristic distance.Finally,the differences in the structural topology optimization under different reliability degrees are illustrated by examples.

Collapse Behavior of Pipe-Framed Greenhouses with and without Reinforcement under Snow Loading:A 3-D Finite Element Analysis

The present paper first investigates the collapse behavior of a conventional pipe-framed greenhouse under snow loading based on a 3-D finite element analysis,in which both geometrical and material non-linearities are considered.Three snow load distribution patterns related to the wind-driven snow particle movement are used in the analysis.It is found that snow load distribution affects the deformation and collapse behavior of the pipe-framed greenhouse significantly.The results obtained in this study are consistent with the actual damage observed.Next,discussion is made of the effects of reinforcements by adding members to the basic frame on the strength of the whole structure,in which seven kinds of reinforcement methods are examined.A buckling analysis is also carried out.The results indicate that the most effective reinforcement method depends on the snow load distribution pattern.

Mixed finite element and differential quadrature method for free and forced vibration and buckling analysis of rectangular plates

This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.

Local buckling failure analysis of high-strength pipelines

Pipelines in geological disaster regions typically suffer the risk of local buckling failure because of slender structure and complex load. This paper is meant to reveal the local buckling behavior of buried pipelines with a large diameter and high strength, which are under different conditions, including pure bending and bending combined with internal pressure. Finite element analysis was built according to previous data to study local buckling behavior of pressurized and unpressurized pipes under bending conditions and their differences in local buckling failure modes. In parametric analysis, a series of parameters,including pipe geometrical dimension, pipe material properties and internal pressure, were selected to study their influences on the critical bending moment, critical compressive stress and critical compressive strain of pipes.Especially the hardening exponent of pipe material was introduced to the parameter analysis by using the Ramberg–Osgood constitutive model. Results showed that geometrical dimensions, material and internal pressure can exert similar effects on the critical bending moment and critical compressive stress, which have different, even reverse effects on the critical compressive strain. Based on these analyses, more accurate design models of critical bending moment and critical compressive stress have been proposed for high-strength pipelines under bendingconditions, which provide theoretical methods for highstrength pipeline engineering.

Buckling analysis of functionally graded material(FGM) sandwich truncated conical shells reinforced by FGM stiffeners filled inside by elastic foundations

An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material （FGM） coating layers and a core layer which are metal or ceramic subjected to an axial compressive load and an external uniform pressure. Shells are reinforced by stringers and rings, in which the material properties of shells and stiffeners are graded in the thickness direction following a general sigmoid law distribution. Two models of coated shell-stiffener arrangements are investigated. The change of the spacing between stringers in the meridional direction is taken into account. A couple set of three-variable- coefficient partial differential equations in terms of displacement components are solved by the Galerkin method. A closed-form expression for determining the buckling load is obtained. The numerical examples are presented and compared with previous works.

Predictive analysis of buckling distortion of thin-plate welded structures

The welding buckling distortions of thin plated structures were investigated based on finite element methods.An engineering treatment method for predicationg the buckling distortion was proposed.The equivalent applied thermal load was used to simulate the welding residual stress,thus the calculation of complex welding distortion can be transformed into 3D elastic structural applied load analyses,which can reduce the quantities of calculating work effectively.The validation of the method was verified by comparison of the numerical calculation with experimental results.The prediction of buckling distortion for side walled structures of passenger train was performed and the calculation was in agreement with measuring results in general.It is shown that the main factors for producing the buckling are the intermittent fillet and plug weld during welding the stiffened beams and columns to the panel.

Size-dependent effect on biaxial and shear nonlinear buckling analysis of nonlocal isotropic and orthotropic micro-plate based on surface stress and modified couple stress theories using differential quadrature method

The size-dependent effect on the biaxial and shear nonlinear buckling analysis of an isotropic and orthotropic micro-plate based on the surface stress, the modified couple stress theory （MCST）, and the nonlocal elasticity theories using the differential quadrature method （DQM） is presented. Main advantages of the MCST over the classical theory （CT） are the inclusion of the asymmetric couple stress tensor and the consideration of only one material length scale parameter. Based on the nonlinear von Karman assumption, the governing equations of equilibrium for the micro-classical plate consid- ering midplane displacements are derived based on the minimum principle of potential energy. Using the DQM, the biaxial and shear critical buckling loads of the micro-plate for various boundary conditions are obtained. Accuracy of the obtained results is validated by comparing the solutions with those reported in the literature. A parametric study is conducted to show the effects of the aspect ratio, the side-to-thickness ratio, Eringen＇s nonlocal parameter, the material length scale parameter, Young＇s modulus of the surface layer, the surface residual stress, the polymer matrix coefficients, and various boundary conditions on the dimensionless uniaxial, biaxial, and shear critical buckling loads. The results indicate that the critical buckling loads are strongly sensitive to Eringen＇s nonlocal parameter, the material length scale parameter, and the surface residual stress effects, while the effect of Young＇s modulus of the surface layer on the critical buckling load is negligible. Also, considering the size dependent effect causes the increase in the stiffness of the orthotropic micro-plate. The results show that the critical biaxial buckling load increases with an increase in G12/E2 and vice versa for E1/E2. It is shown that the nonlinear biaxial buckling ratio decreases as the aspect ratio increases and vice versa for the buckling amplitude. Because of the most lightweight micro-composite materials with high strength/weight and stiffness/weight ratios, it is anticipated that the results of the present work are useful in experimental characterization of the mechanical properties of micro-composite plates in the aircraft industry and other engineering applications.

Buckling Analysis of TF Coil Inner Leg for Central Solenoidless Tokamak

The central post is one of the critical components for the low aspect ratio tokamak, which endures not only a tremendous ohmic heating because it carries a rather high current, but also a large neutron heating and irradiation owing to the plasma operation. The DS copper alloy Glidcop AL-25[8] was chosen as the conductor material for its adequate mechanical properties and physics properties. The central post has a cylindrical structure with lots of cooling channels. The length of the central post for the next generation of nuclear fusion spherical tokamaks will be more than 10 m or 20 m. The structural stability is very crucial. When the applied load is larger than the structure critical buckling load, the device will lose its stability and collapse. In order to calculate the critical buckling load, a 1/6-segment finite element model was used and the force acting on the central post was simulated. The results showed that the vertical compressive stresses mainly affect the stability of the central post. The linear buckling analysis results with finite element method based on small deformation theory were given in this paper. The relation curves and functions for buckling factor, depending on the different lengths and the radius of the central post, the diameter of cooling channel and the maximum allowable current density, were also shown.

Machine Learning-Based Seismic Fragility Analysis of Large-Scale Steel Buckling Restrained Brace Frames

Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid to the seismic risk assessment(SRA)of such structures,e.g.,seismic fragility analysis.Conventional approaches,e.g.,nonlinear finite element simulation(NFES),are computationally inefficient for SRA analysis particularly for large-scale steel BRB frame structures.In this study,amachine learning(ML)-based seismic fragility analysis framework is established to effectively assess the risk to structures under seismic loading conditions.An optimal artificial neural network model can be trained using calculated damage and intensity measures,a technique which will be used to compute the fragility curves of a steel BRB frame instead of employing NFES.Numerical results show that a highly efficient instantaneous failure probability assessment can be made with the proposed framework for realistic large-scale building structures.

Linear Buckling Analysis of the HT-7U Vacuum Vessel

The vacuum vessel of the HT-7U superconducting Tokamak is designed as an allmetal welded double-wall structure with a number of radial and vertical ports. With characteristicsof ultrahigh vacuum and thin shell, the analysis on stability is very important to the design. Toachieve a successful final design, a threedimension buckling model has been performed using thefinite element program CoSMOS/M2.0. For all the cases having been considered, a 1/16 segmentof the whole toric shell are used to calculate the linear critical buckling load (Pc.,,) under auniform and nonwhform external pressure. As expected, the structure has a good capability ofwithstanding the applied loads.

Stress and buckling analysis of a thick-walled micro sandwich panel with a flexible foam core and carbon nanotube reinforced composite (CNTRC) face sheets

In this paper,the stresses and buckling behaviors of a thick-walled mi-cro sandwich panel with a flexible foam core and carbon nanotube reinforced composite(CNTRC)face sheets are considered based on the high-order shear deformation theory(HSDT)and the modified couple stress theory(MCST).The governing equations of equi-librium are obtained based on the total potential energy principle.The effects of various parameters such as the aspect ratio,elastic foundation,temperature changes,and volume fraction of the canbon nanotubes(CNTs)on the critical buckling loads,normal stress,shear stress,and deflection of the thick-walled micro cylindrical sandwich panel consider-ing different distributions of CNTs are examined.The results are compared and validated with other studies,and showing an excellent compatibility.CNTs have become very use-ful and common candidates in sandwich structures,and they have been extensively used in many applications including nanotechnology,aerospace,and micro-structures.This paper also extends further applications of reinforced sandwich panels by providing the modified equations and formulae.

Global lateral buckling analysis of idealized subsea pipelines

In order to avoid the curing effects of paraffin on the transport process and reduce the transport difficulty,usually high temperature and high pressure are used in the transportation of oil and gas.The differences of temperature and pressure cause additional stress along the pipeline,due to the constraint of the foundation soil,the additional stress can not release freely,when the additional stress is large enough to motivate the submarine pipelines buckle.In this work,the energy method is introduced to deduce the analytical solution which is suitable for the global buckling modes of idealized subsea pipeline and analyze the relationship between the critical buckling temperature,buckling length and amplitude under different high-order global lateral buckling modes.To obtain a consistent formulation of the problem,the principles of virtual displacements and the variation calculus for variable matching points are applied.The finite element method based on elasto-plastic theory is used to simulate the lateral global buckling of the pipelines under high temperature and pressure.The factors influencing the lateral buckling of pipelines are further studied.Based upon some actual engineering projects,the finite element results are compared with the analytical ones,and then the influence of thermal stress,the section rigidity of pipeline,the soil properties and the trigging force to the high order lateral buckling are discussed.The method of applying the small trigging force on pipeline is reliable in global buckling numerical analysis.In practice,increasing the section rigidity of a pipeline is an effective measure to improve the ability to resist the global buckling.

Buckling analysis of super-long rock-socketed filling piles in soft soil area by element free Galerkin method

In order to discuss the buckling stability of super-long rock-socketed filling piles widely used in bridge engineering in soft soil area such as Dongting Lake, the second stability type was adopted instead of traditional first type, and a newly invented numerical analysis method, i.e. the element-free Galerkin method (EFGM), was introduced to consider the non-concordant deformation and nonlinearity of the pile-soil interface. Then, based on the nonlinear elastic-ideal plastic pile-soil interface model, a nonlinear iterative algorithm was given to analyze the pile-soil interaction, and a program for buckling analysis of piles by the EFGM (PBAP-EFGM) and arc length method was worked out as well. The application results in an engineering example show that, the shape of pile top load-settlement curve obtained by the program agrees well with the measured one, of which the difference may be caused mainly by those uncertain factors such as possible initial defects of pile shaft and the eccentric loading during the test process. However, the calculated critical load is very close with the measured ultimate load of the test pile, and the corresponding relative error is only 5.6%, far better than the calculated values by linear and nonlinear incremental buckling analysis (with a greater relative error of 37.0% and 15.4% respectively), which also verifies the rationality and feasibility of the present method.

Assessment of buckling-restrained braced frame reliability using an experimental limit-state model and stochastic dynamic analysis

Buckling-restrained braces （BRBs） have recently become popular in the United States for use as primary members of seismic lateral-force-resisting systems. A BRB is a steel brace that does not buckle in compression but instead yields in both tension and compression. Although design guidelines for BRB applications have been developed, systematic procedures for assessing performance and quantifying reliability are still needed. This paper presents an analytical framework for assessing buckling-restrained braced frame （BRBF） reliability when subjected to seismic loads. This framework efficiently quantifies the risk of BRB failure due to low-cycle fatigue fracture of the BRB core. The procedure includes a series of components that： （1） quantify BRB demand in terms of BRB core deformation histories generated through stochastic dynamic analyses; （2） quantify the limit-state of a BRB in terms of its remaining cumulative plastic ductility capacity based on an experimental database; and （3） evaluate the probability of BRB failure, given the quantified demand and capacity, through structural reliability analyses. Parametric studies were conducted to investigate the effects of the seismic load, and characteristics of the BRB and BRBF on the probability of brace failure. In addition, fragility curves （i.e., conditional probabilities of brace failure given ground shaking intensity parameters） were created by the proposed framework. While the framework presented in this paper is applied to the assessment of BRBFs, the modular nature of the framework components allows for application to other structural components and systems.

NumericalAnalysisforBucklingandPost─BucklingBehaviorofPlanarFrames

Research on the problem of buckling and post buckling for structures is one of noticed directions in the field of engineering mechanics at present. Whether from the aspect of theory or from the aspect of numerical method, it is necessary to have a deep research on the problem. In this paper, a new geometrical nonlinear element and numerical implementation were presented. By some examples, the problem of buckling and post bukling for planar frames subjected to given loads was discussed in detail.

FEM and EFG Quasi-Static Explicit Buckling Analysis for Thin-Walled Members

The quasi-static explicit finite element method (FEM) and element free Galerkin (EFG) method are applied to trace the post-buckling equilibrium path of thin-walled members in this paper. The factors that primarily control the explicit buckling solutions, such as the computation time, loading function and dynamic relaxation, are investigated and suggested for the buckling analysis of thin-walled members. Three examples of different buckling modes, namely snap-through, overall and local buckling, are studied based on the implicit FEM, quasi-static explicit FEM and EFG method via the commercial software LS-DYNA. The convergence rate and accuracy of the explicit methods are compared with the conventional implicit arc-length method. It is drawn that EFG quasi-static explicit buckling analysis presents the same accurate results as implicit finite element solution, but is without convergence problem and of less-consumption of computing time than FEM.

ENDOCHRONIC ANALYSIS FOR COMPRESSIVE BUCKLING OF THIN－WALLED CYLINDERS IN YIELD REGION

The longitudinal compressive buckling of long and thin-walled cylinders in yield region is analyzed with the incremental and finite forms of the endochronic constitutive equation, respectively. The relations between the critical stress σ_(cr)versus the ratio of R (the radius) versus h (the thickness of the wall) are derived. The critical stress of the thin-walled cylinders made of abuminum alloys AMГ and 1T are analyzed and compared with the experimental data and the analytical results based on traditional theory of plasticity. It is seen that. except that the σ_(cr) of the cylinders made of 1Tpredicted by the finite form of the endochronic theory seems a little more conservative than that by traditional deformation theory of plasticity, in most cases, both forms of the endochornic constitutive equation provide more satisfactory results.