The parameters of beam transverse positions at HLS 200 MeV LINAC are very important to injection ef-ficiency. We have designed a new non-interceptive strip line beam position monitor (BPM) as a substitution for the or...The parameters of beam transverse positions at HLS 200 MeV LINAC are very important to injection ef-ficiency. We have designed a new non-interceptive strip line beam position monitor (BPM) as a substitution for the original interceptive fluorescent target. This paper gives out the theoretical analysis and bench test result of the strip line BPM. The BPM has a characteristic impedance of (50±5)?, a reflection coefficient of less than –4 dB, a band-width of 400 MHz, a coupling coefficient of less than -15 dB, and a sensitivity of 1.16 dB/mm. Additionally, the strip line BPM has a good linearity.展开更多
A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical...A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical simulations, a beam line combining the advantages of quadrupole and analyzing magnets is designed to deliver proton beams with energy ranging from 1 to 44MeV, energy spread within ±5% and 10^6-8 protons per pulse. It turns out that the existence of space charge force of protons can be ignored for the increase of transverse and longitudinal envelopes even in the case of 10^9 protons in one pulse. To cope with the challenge to obtain a uniform distribution of protons at the final experiment target in laser acceleration, we manipulate the envelope beam waist in the Y direction to a proper position and obtain a relatively good distribution uniformity of protons with an energy spread of 0-±5%0.展开更多
Under three-dimensional plane geometrical constraints ( X,Y,θ ), with two asymmetric achromatic sections, the combined three-section structural FODO-like magnet lattice design is adopted and finely optimized in the S...Under three-dimensional plane geometrical constraints ( X,Y,θ ), with two asymmetric achromatic sections, the combined three-section structural FODO-like magnet lattice design is adopted and finely optimized in the SSRF electron-beam transfer lines. The magnet lattice has high flexibility and robustness, and the Courant–Snyder parameters can be easily adjusted within a wide range to meet the requirements of transmission and injection for different operation modes of the linear accelerator, booster synchrotron, and storage ring. In this article, the main parameters of the linear optics design of the SSRF electron-beam transfer lines are described, involving the physical design criteria, the total geometrical layout, the magnet lattice, and the beam Courant–Snyder parameters matching. The studies of the variant beam dynamic simulation program calculations show that the design purpose of the efficient beam transmission and injection will be basically achieved.展开更多
The dynamic response of a double infinite beam system connected by a viscoelastic foundation under the harmonic line load is studied. The double infinite beam system consists of two identical and parallel beams, and t...The dynamic response of a double infinite beam system connected by a viscoelastic foundation under the harmonic line load is studied. The double infinite beam system consists of two identical and parallel beams, and the two beams are infinite elastic homogeneous and isotropic. A viscoelastic layer connects the two beams continuously. To decouple the two coupled equations governing the response of the double infinite beam system, a variable substitution method is introduced. The frequency domain solutions of the decoupled equations are obtained by using Fourier transforms as well as Laplace transforms successively. The time domain solution in the generalized integral form are then obtained by employing the corresponding inverse transforms, i.e. Fourier transform and inverse Laplace transform. The solution is verified by numerical examples, and the effects of parameters on the response are also investigated.展开更多
Neutral beam injector for EAST is designed to deliver deuterium beams with a power of 2 MW to 4 MW at an energy of 50 keV to 80 keV into the plasma with a beam dimension of 12 cm× 48 cm. Considering the beam gene...Neutral beam injector for EAST is designed to deliver deuterium beams with a power of 2 MW to 4 MW at an energy of 50 keV to 80 keV into the plasma with a beam dimension of 12 cm× 48 cm. Considering the beam generation and transmission, a columniform beam-line of Ф 250 cm × 400 cm is designed with a neutralizer, ion dump, calorimeter, bending magnet and cryopanels. The arrangement of the internal elements for the beam-line is reported. A rectangular sleeve coupled to the ion source is employed as the neutralizer. At the downstream of the neutralizer, a dipole magnet separates the residual ions from the beam passage with a reflection radius of 42 cm for the full energy particles. The calorimeter and the ion dump serve as high heat flux components, which will work as thermal inertia targets in the first phase of operation.展开更多
A photoacoustic (PA) imaging apparatus using a laser line-focus beam (LFB) was designed to perform rapid inspection and photoacoustic tomographic (PAT) imaging of surface and undersurface defects. 2D-PAT imaging of su...A photoacoustic (PA) imaging apparatus using a laser line-focus beam (LFB) was designed to perform rapid inspection and photoacoustic tomographic (PAT) imaging of surface and undersurface defects. 2D-PAT imaging of surface and undersurface defects was demonstrated based on a formulation similar to the X-ray tomography. The obtained PAT images represented forward-projected PA signals collected along the LFB. The reconstructed images were in close agreement with those obtained from laser point-focus beam (PFB) PA imaging. We achieved rapid non-destructive inspection of a surface-simulated defect using a LFB. The reconstructed PA image of the undersurface defect was consistent with that obtained by a plane-thermal wave diffraction model.展开更多
基金Supported by Project of Building a High-level University Well-known Both in China and in the World (KY2901), and Project of Hi-tech Research and Development Program of China (863-410-8-2)
文摘The parameters of beam transverse positions at HLS 200 MeV LINAC are very important to injection ef-ficiency. We have designed a new non-interceptive strip line beam position monitor (BPM) as a substitution for the original interceptive fluorescent target. This paper gives out the theoretical analysis and bench test result of the strip line BPM. The BPM has a characteristic impedance of (50±5)?, a reflection coefficient of less than –4 dB, a band-width of 400 MHz, a coupling coefficient of less than -15 dB, and a sensitivity of 1.16 dB/mm. Additionally, the strip line BPM has a good linearity.
基金Supported by the National Natural Science Foundation of China under Grant No 11575011the National Grand Instrument Project under Grant No 2012YQ030142
文摘A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical simulations, a beam line combining the advantages of quadrupole and analyzing magnets is designed to deliver proton beams with energy ranging from 1 to 44MeV, energy spread within ±5% and 10^6-8 protons per pulse. It turns out that the existence of space charge force of protons can be ignored for the increase of transverse and longitudinal envelopes even in the case of 10^9 protons in one pulse. To cope with the challenge to obtain a uniform distribution of protons at the final experiment target in laser acceleration, we manipulate the envelope beam waist in the Y direction to a proper position and obtain a relatively good distribution uniformity of protons with an energy spread of 0-±5%0.
基金Supported by National Important Scientific Project "Shanghai Synchrotron Radiation Facility".
文摘Under three-dimensional plane geometrical constraints ( X,Y,θ ), with two asymmetric achromatic sections, the combined three-section structural FODO-like magnet lattice design is adopted and finely optimized in the SSRF electron-beam transfer lines. The magnet lattice has high flexibility and robustness, and the Courant–Snyder parameters can be easily adjusted within a wide range to meet the requirements of transmission and injection for different operation modes of the linear accelerator, booster synchrotron, and storage ring. In this article, the main parameters of the linear optics design of the SSRF electron-beam transfer lines are described, involving the physical design criteria, the total geometrical layout, the magnet lattice, and the beam Courant–Snyder parameters matching. The studies of the variant beam dynamic simulation program calculations show that the design purpose of the efficient beam transmission and injection will be basically achieved.
基金National Natural Science Foundation of China under Grant No.51578145
文摘The dynamic response of a double infinite beam system connected by a viscoelastic foundation under the harmonic line load is studied. The double infinite beam system consists of two identical and parallel beams, and the two beams are infinite elastic homogeneous and isotropic. A viscoelastic layer connects the two beams continuously. To decouple the two coupled equations governing the response of the double infinite beam system, a variable substitution method is introduced. The frequency domain solutions of the decoupled equations are obtained by using Fourier transforms as well as Laplace transforms successively. The time domain solution in the generalized integral form are then obtained by employing the corresponding inverse transforms, i.e. Fourier transform and inverse Laplace transform. The solution is verified by numerical examples, and the effects of parameters on the response are also investigated.
基金supported by National Natural Science Foundation of China (No. 10875146)the Knowledge Innovation Program of the Chinese Academy of Sciences:The study and simulation on beam interaction with background particles in neutralization area for NBI
文摘Neutral beam injector for EAST is designed to deliver deuterium beams with a power of 2 MW to 4 MW at an energy of 50 keV to 80 keV into the plasma with a beam dimension of 12 cm× 48 cm. Considering the beam generation and transmission, a columniform beam-line of Ф 250 cm × 400 cm is designed with a neutralizer, ion dump, calorimeter, bending magnet and cryopanels. The arrangement of the internal elements for the beam-line is reported. A rectangular sleeve coupled to the ion source is employed as the neutralizer. At the downstream of the neutralizer, a dipole magnet separates the residual ions from the beam passage with a reflection radius of 42 cm for the full energy particles. The calorimeter and the ion dump serve as high heat flux components, which will work as thermal inertia targets in the first phase of operation.
文摘A photoacoustic (PA) imaging apparatus using a laser line-focus beam (LFB) was designed to perform rapid inspection and photoacoustic tomographic (PAT) imaging of surface and undersurface defects. 2D-PAT imaging of surface and undersurface defects was demonstrated based on a formulation similar to the X-ray tomography. The obtained PAT images represented forward-projected PA signals collected along the LFB. The reconstructed images were in close agreement with those obtained from laser point-focus beam (PFB) PA imaging. We achieved rapid non-destructive inspection of a surface-simulated defect using a LFB. The reconstructed PA image of the undersurface defect was consistent with that obtained by a plane-thermal wave diffraction model.
