Post-processing Free Quantum Random Number Generator Based on Avalanche Photodiode Array

Quantum random number generators adopting single negligible dead time of avalanche photodiodes （APDs） photon detection have been restricted due to the non- We propose a new approach based on an APD array to improve the generation rate of random numbers significantly. This method compares the detectors＇ responses to consecutive optical pulses and generates the random sequence. We implement a demonstration experiment to show its simplicity, compactness and scalability. The generated numbers are proved to be unbiased, post-processing free, ready to use, and their randomness is verified by using the national institute of standard technology statistical test suite. The random bit generation efficiency is as high as 32.8% and the potential generation rate adopting the 32× 32 APD array is up to tens of Gbits/s.

Development of a Post-Processing Automation Procedure for the GPS-Based Travel Time Data Collection Technique

The travel time data collection method is used to assist the congestion management. The use of traditional sensors (e.g. inductive loops, AVI sensors) or more recent Bluetooth sensors installed on major roads for collecting data is not sufficient because of their limited coverage and expensive costs for installation and maintenance. Application of the Global Positioning Systems (GPS) in travel time and delay data collections is proven to be efficient in terms of accuracy, level of details for the data and required data collection of man-power. While data collection automation is improved by the GPS technique, human errors can easily find their way through the post-processing phase, and therefore data post-processing remains a challenge especially in case of big projects with high amount of data. This paper introduces a stand-alone post-processing tool called GPS Calculator, which provides an easy-to-use environment to carry out data post-processing. This is a Visual Basic application that processes the data files obtained in the field and integrates them into Geographic Information Systems (GIS) for analysis and representation. The results show that this tool obtains similar results to the currently used data post-processing method, reduces the post-processing effort, and also eliminates the need for the second person during the data collection.

A method of line spectrum extraction based on target radiated spectrum feature and its post-processing

To improve the ability of detecting underwater targets under strong wideband interference environment,an efficient method of line spectrum extraction is proposed,which fully utilizes the feature of the target spectrum that the high intense and stable line spectrum is superimposed on the wide continuous spectrum.This method modifies the traditional beam forming algorithm by calculating and fusing the beam forming results at multi-frequency band and multi-azimuth interval,showing an excellent way to extract the line spectrum when the interference and the target are not in the same azimuth interval simultaneously.Statistical efficiency of the estimated azimuth variance and corresponding power of the line spectrum band depends on the line spectra ratio(LSR)of the line spectrum.The change laws of the output signal to noise ratio(SNR)with the LSR,the input SNR,the integration time and the filtering bandwidth of different algorithms bring the selection principle of the critical LSR.As the basis,the detection gain of wideband energy integration and the narrowband line spectrum algorithm are theoretically analyzed.The simulation detection gain demonstrates a good match with the theoretical model.The application conditions of all methods are verified by the receiver operating characteristic(ROC)curve and experimental data from Qiandao Lake.In fact,combining the two methods for target detection reduces the missed detection rate.The proposed post-processing method in2-dimension with the Kalman filter in the time dimension and the background equalization algorithm in the azimuth dimension makes use of the strong correlation between adjacent frames,could further remove background fluctuation and improve the display effect.

A study on fast post-processing massive data of casting numerical simulation on personal computers

When castings become complicated and the demands for precision of numerical simulation become higher,the numerical data of casting numerical simulation become more massive.On a general personal computer,these massive numerical data may probably exceed the capacity of available memory,resulting in failure of rendering.Based on the out-of-core technique,this paper proposes a method to effectively utilize external storage and reduce memory usage dramatically,so as to solve the problem of insufficient memory for massive data rendering on general personal computers.Based on this method,a new postprocessor is developed.It is capable to illustrate filling and solidification processes of casting,as well as thermal stess.The new post-processor also provides fast interaction to simulation results.Theoretical analysis as well as several practical examples prove that the memory usage and loading time of the post-processor are independent of the size of the relevant files,but the proportion of the number of cells on surface.Meanwhile,the speed of rendering and fetching of value from the mouse is appreciable,and the demands of real-time and interaction are satisfied.

A Post-Processing Algorithm for Boosting Contrast of MRI Images

Low contrast of Magnetic Resonance(MR)images limits the visibility of subtle structures and adversely affects the outcome of both subjective and automated diagnosis.State-of-the-art contrast boosting techniques intolerably alter inherent features of MR images.Drastic changes in brightness features,induced by post-processing are not appreciated in medical imaging as the grey level values have certain diagnostic meanings.To overcome these issues this paper proposes an algorithm that enhance the contrast of MR images while preserving the underlying features as well.This method termed as Power-law and Logarithmic Modification-based Histogram Equalization(PLMHE)partitions the histogram of the image into two sub histograms after a power-law transformation and a log compression.After a modification intended for improving the dispersion of the sub-histograms and subsequent normalization,cumulative histograms are computed.Enhanced grey level values are computed from the resultant cumulative histograms.The performance of the PLMHE algorithm is comparedwith traditional histogram equalization based algorithms and it has been observed from the results that PLMHE can boost the image contrast without causing dynamic range compression,a significant change in mean brightness,and contrast-overshoot.

Hybrid Post-Processing Procedure for Displacement-Based Plane Elements

In the analysis of high-rise building, traditional displacement-based plane elements are often used to get the in-plane internal forces of the shear walls by stress integration. Limited by the singular problem produced by wall holes and the loss of precision induced by using differential method to derive strains, the displacement-based elements cannot always present accuracy enough for design. In this paper, the hybrid post-processing procedure based on the Hellinger-Reissner variational principle is used for improving the stress precision of two quadrilateral plane elements. In order to find the best stress field, three different forms are assumed for the displacement-based plane elements and with drilling DOF. Numerical results show that by using the proposed method, the accuracy of stress solutions of these two displacement-based plane elements can be improved.

Review of shock wave detection method in CFD post-processing

In the present computational fluid dynamics （CFD） community, post-processing is regarded as a procedure to view parameter distribution, detect characteristic structure and reveal physical mechanism of fluid flow based on computational or experimental results. Field plots by contours, iso-surfaces, streamlines, vectors and others are traditional post-processing techniques. While the shock wave, as one important and critical flow structure in many aerodynamic problems, can hardly be detected or distinguished in a direct way using these traditional methods, due to possible confusions with other similar discontinuous flow structures like slip line, contact discontinuity, etc. Therefore, method for automatic detection of shock wave in post-processing is of great importance for both academic research and engineering applications. In this paper, the current status of methodologies developed for shock wave detection and implementations in post-processing platform are reviewed, as well as discussions on advantages and limitations of the existing methods and proposals for further studies of shock wave detection method. We also develop an advanced post-processing software, with improved shock detection.

A novel laser shock post-processing technique on the laser-induced damage resistance of 1ωHfO_(2)/SiO_(2)

The laser shock processing implemented by a laser-induced high-pressure plasma which propagates into the sample as a shockwave is innovatively applied as a post-processing technique on HfO_(2)/SiO_(2) multilayer coatings for the first time.The pure mechanical post-processing has provided evidence of a considerable promotion effect of the laser-induced damage threshold,which increased by a factor of about 4.6 with appropriate processing parameters.The promotion mechanism is confirmed to be the comprehensive modification of the intrinsic defects and the mechanical properties,which made the applicability of this novel post-processing technique on various types of coatings possible.Based on experiments,an interaction equation for the plasma pressure is established,which clarifies the existence of the critical pressure and provides a theoretical basis for selecting optimal processing parameters.In addition to the further clarification of the underlying damage mechanism,the laser shock post-processing provides a promising technique to realize the comprehensive and effective improvement of the laser-induced damage resistance of coatings.

Post-processing of biochars to enhance plant growth responses:a review and meta-analysis

A number of processes for post-production treatment of“raw”biochars,including leaching,aeration,grinding or sieving to reduce particle size,and chemical or steam activation,have been suggested as means to enhance biochar effectiveness in agriculture,forestry,and environmental restoration.Here,I review studies on post-production processing methods and their effects on biochar physio-chemical properties and present a meta-analysis of plant growth and yield responses to post-processed vs.“raw”biochars.Data from 23 studies provide a total of 112 comparisons of responses to processed vs.unprocessed biochars,and 103 comparisons allowing assessment of effects relative to biochar particle size;additional 8 published studies involving 32 comparisons provide data on effects of biochar leachates.Overall,post-processed biochars resulted in significantly increased average plant growth responses 14%above those observed with unprocessed biochar.This overall effect was driven by plant growth responses to reduced biochar particle size,and heating/aeration treatments.The assessment of biochar effects by particle size indicates a peak at a particle size of 0.5-1.0 mm.Biochar leachate treatments showed very high heterogeneity among studies and no average growth benefit.I conclude that physiochemical post-processing of biochar offers substantial additional agronomic benefits compared to the use of unprocessed biochar.Further research on post-production treatments effects will be important for biochar utilization to maximize benefits to carbon sequestration and system productivity in agriculture,forestry,and environmental restoration.

Recognition results classification and post-processing methods for painted characters on billet surface

Automatic identification of characters marked on billets is very important for steelworks to achieve manu- facturing and logistics informatization management. Due to the presence of adhesions, fractures, blurs, and other problems in characters painted on billets, character recognition accuracy with machine vision is relatively low, and hardly meets practical application requirements. To make the character recognition results more reliable and accu- rate, an identification results classification and post-pro- cessing method has been proposed in this paper. By analyzing issues in the image segmentation and recognition stage, the recognition result classification model, based on character encoding rules and recognition confidence, is built, and the character recognition results can be classified as correct, suspect, or wrong. In the post-processing stage, a human-machine-cooperation mechanism with a post- processing interface is designed to eliminate error infor- mation in suspect and wrong types. The system was developed and experiments conducted with images acquired in an iron and steel factory. The results show the character recognition accuracy to be approximately 89% using the character recognizer. However, this result cannot be directly applied in information management systems. With the proposed post-processing method, a human worker will query the suspect and wrong results classified by the system, determine whether the result is correct or wrong, and then, correct the wrong result through the post-processing interface. Using this method, the character recognition accuracy ultimately improves to 99.4%. Thus, the results will be more reliable applied in a practical system.

A Deep Spatio-Temporal Forecasting Model for Multi-Site Weather Prediction Post-Processing

In this paper, we propose a deep spatio-temporal forecasting model (DeepSTF) for multi-site weather prediction post-processing by using both temporal andspatial information. In our proposed framework, the spatio-temporal information ismodeled by a CNN (convolutional neural network) module and an encoder-decoderstructure with the attention mechanism. The novelty of our work lies in that our modeltakes full account of temporal and spatial characteristics and obtain forecasts of multiple meteorological stations simultaneously by using the same framework. We applythe DeepSTF model to short-term weather prediction at 226 meteorological stations inBeijing. It significantly improves the short-term forecasts compared to other widelyused benchmark models including the Model Output Statistics method. In order toevaluate the uncertainty of the model parameters, we estimate the confidence intervals by bootstrapping. The results show that the prediction accuracy of the DeepSTFmodel has strong stability. Finally, we evaluate the impact of seasonal changes and topographical differences on the accuracy of the model predictions. The results indicatethat our proposed model has high prediction accuracy.

A post-processing method for true random number generators based on hyperchaos with applications in audio-based generators

True random number generators(TRNG)are important counterparts to pseudorandom number generators(PRNG).especially for high security applications such as cryptography.They produce unpredictable,non-repeatablerandom sequences.However,most TRNGs require specialized hardware to extract entropy from physical phenomena and tend to be slower than PRNGs.These generators usually require post-processing algorithms to eliminate biases but in tun.reduces performance.In this paper.a newpost-processing method based on hyperchaos is proposed forsoftware-based TRNGs which not only eliminates statisticalbiases but also provides amplification in order to improve the performance of TRNGs.The proposed method utilizes the inherent characteristics of chaos such as hypersensitivity to input shanugeri,diffusisn,and csnfusion sapabilities to ushievethese goals.Quantized bits of a physical entropy source areused to perturb the parameters of a hyperchaotic map,which is then iterated to produce a set of random output bits.To de-pict the feasibility of the proposed post-processing algorithm.it is applied in designing TRNGs based on digital audio.Thegenerators are analyzed to identify statistical defects in addition to forward and backward security.Results indicate that the proposed generators are able to produce secure true random sequences at a high throughput,which in turn reflects on the effectiveness of the proposed post-processing method.

Post processing of additive manufactured Mg alloys:Current status,challenges,and opportunities

Magnesium(Mg)and its alloys are emerging as a structural material for the aerospace,automobile,and electronics industries,driven by the imperative of weight reduction.They are also drawing notable attention in the medical industries owing to their biodegradability and a lower elastic modulus comparable to bone.The ability to manufacture near-net shape products featuring intricate geometries has sparked huge interest in additive manufacturing(AM)of Mg alloys,reflecting a transformation in the manufacturing sectors.However,AM of Mg alloys presents more formidable challenges due to inherent properties,particularly susceptibility to oxidation,gas trapping,high thermal expansion coefficient,and low solidification temperature.This leads to defects such as porosity,lack of fusion,cracking,delamination,residual stresses,and inhomogeneity,ultimately influencing the mechanical,corrosion,and surface properties of AM Mg alloys.To address these issues,post-processing of AM Mg alloys are often needed to make them suitable for application.The present article reviews all post-processing techniques adapted for AM Mg alloys to date,including heat treatment,hot isostatic pressing,friction stir processing,and surface peening.The utilization of these methods within the hybrid AM process,employing interlayer post-processing,is also discussed.Optimal post-processing conditions are reported,and their influence on the microstructure,mechanical,and corrosion properties are detailed.Additionally,future prospects and research directions are proposed.

Line Patterns Segmentation in Blurred Images Using Contrast Enhancement and Local Entropy Thresholding

Finger vein extraction and recognition hold significance in various applications due to the unique and reliable nature of finger vein patterns. While recently finger vein recognition has gained popularity, there are still challenges associated with extracting and processing finger vein patterns related to image quality, positioning and alignment, skin conditions, security concerns and processing techniques applied. In this paper, a method for robust segmentation of line patterns in strongly blurred images is presented and evaluated in vessel network extraction from infrared images of human fingers. In a four-step process: local normalization of brightness, image enhancement, segmentation and cleaning were involved. A novel image enhancement method was used to re-establish the line patterns from the brightness sum of the independent close-form solutions of the adopted optimization criterion derived in small windows. In the proposed method, the computational resources were reduced significantly compared to the solution derived when the whole image was processed. In the enhanced image, where the concave structures have been sufficiently emphasized, accurate detection of line patterns was obtained by local entropy thresholding. Typical segmentation errors appearing in the binary image were removed using morphological dilation with a line structuring element and morphological filtering with a majority filter to eliminate isolated blobs. The proposed method performs accurate detection of the vessel network in human finger infrared images, as the experimental results show, applied both in real and artificial images and can readily be applied in many image enhancement and segmentation applications.

Image Representations of Numerical Simulations for Training Neural Networks

A large amount of data can partly assure good fitting quality for the trained neural networks.When the quantity of experimental or on-site monitoring data is commonly insufficient and the quality is difficult to control in engineering practice,numerical simulations can provide a large amount of controlled high quality data.Once the neural networks are trained by such data,they can be used for predicting the properties/responses of the engineering objects instantly,saving the further computing efforts of simulation tools.Correspondingly,a strategy for efficiently transferring the input and output data used and obtained in numerical simulations to neural networks is desirable for engineers and programmers.In this work,we proposed a simple image representation strategy of numerical simulations,where the input and output data are all represented by images.The temporal and spatial information is kept and the data are greatly compressed.In addition,the results are readable for not only computers but also human resources.Some examples are given,indicating the effectiveness of the proposed strategy.

Application of the quadrilateral area coordinate method:a new element for laminated composite plate bending problems

Recently, some new quadrilateral finite elements were successfully developed by the Quadrilateral Area Coordinate （QAC） method. Compared with those traditional models using isoparametric coordinates, these new models are less sensitive to mesh distortion. In this paper, a new displacement-based, 4-node 20-DOF （5-DOF per node） quadrilateral bending element based on the first-order shear deformation theory for analysis of arbitrary laminated composite plates is presented. Its bending part is based on the element AC-MQ4, a recent-developed high-performance Mindlin-Reissner plate element formulated by QAC method and the generalized conforming condition method; and its in-plane displacement fields are interpolated by bilinear shape functions in isoparametric coordinates. Furthermore, the hybrid post-rocessing procedure, which was firstly proposed by the authors, is employed again to improve the stress solutions, especially for the transverse shear stresses. The resulting element, denoted as AC-MQ4-LC, exhibits excellent performance in all linear static and dynamic numerical examples. It demonstrates again that the QAC method, the generalized conforming condition method, and the hybrid post-processing procedure are efficient tools for developing simple, effective and reliable finite element models.

Super spectral viscosity method for nonlinear conservation laws

In this paper, the super spectral viscosity （SSV） method is developed by introducing a spectrally small amount of high order regularization which is only activated on high frequencies. The resulting SSV approximation is stable and convergent to the exact entropy solution. A Gegenbauer-Chebyshev post-processing for the SSV solution is proposed to remove the spurious oscillations at the disconti-nuities and recover accuracy from the spectral approximation. The ssv method is applied to the scahr periodic Burgers equation and the one-dimensional system of Euler equations of gas dynamics. The numerical results exhibit high accuracy and resolution to the exact entropy solution,

Evaluation of TIGGE Ensemble Forecasts of Precipitation in Distinct Climate Regions in Iran

The application of numerical weather prediction （NWP） products is increasing dramatically. Existing reports indicate that ensemble predictions have better skill than deterministic forecasts. In this study, numerical ensemble precipitation forecasts in the TIGGE database were evaluated using deterministic, dichotomous （yes/no）, and probabilistic techniques over Iran for the period 2008-16. Thirteen rain gauges spread over eight homogeneous precipitation regimes were selected for evaluation. The Inverse Distance Weighting and Kriging methods were adopted for interpolation of the prediction values, downscaled to the stations at lead times of one to three days. To enhance the forecast quality, NWP values were post-processed via Bayesian Model Averaging. The results showed that ECMWF had better scores than other products. However, products of all centers underestimated precipitation in high precipitation regions while overestimating precipitation in other regions. This points to a systematic bias in forecasts and demands application of bias correction techniques. Based on dichotomous evaluation, NCEP did better at most stations, although all centers overpredicted the number of precipitation events. Compared to those of ECMWF and NCER UKMO yielded higher scores in mountainous regions, but performed poorly at other selected stations. Furthermore, the evaluations showed that all centers had better skill in wet than in dry seasons. The quality of post-processed predictions was better than those of the raw predictions. In conclusion, the accuracy of the NWP predictions made by the selected centers could be classified as medium over Iran, while post-processing of predictions is recommended to improve the quality.

Application of an Explicit Upstream FEM in Estuary Study

The Explicit Upstream FEM (EU-FEM) proposed in this paper not only possesses the advantages of saving memory and CPU time for FDM, but also fits boundary easily, arranges nodal points flexibly and makes local grids fine down conveniently. The software package, which consists of EU-FEM models and pre/post-processing skills, has been widely used to estuary, near-shore, bay, lake and complex waters with many islands and channels. In addition to flow field, this model can be used to calculate the distribution fields of pollutants, temperature, salinity, sediment, and oil spill, and can be used to case study of estuary regulation projects. Some practical applications are presented and some problems discussed.

RESEARCH ON THE ALGORITHM OF BINARY IMAGE CROSS-CORRELATION FOR UNSTEADY FLOW FIELD MEASUREMENT

The algorithm of Binary Image Cross-Correlation (BICC) was developed to measure the unsteady flow field. A vortex flow field was used to test the algorithm by numerical simulation. The results show that BICC is an effective algorithm for particle identification from consecutive images, the accurate velocity vector field can be obtained. The real velocity field in a valve chamber was measured by BICC in this study. From the full-field velocity information, the pressure and vorticity fields were also extracted by post-processing. (Edited author abstract) 6 Refs.