A Theoretical Model for the Asymmetric Transmission of Powerful Acoustic Wave in Double-Layer Liquids

A theoretical model which couples the oscillation of cavitation bubbles with the equation of an acoustic wave is utilized to describe the sound fields in double-layer liquids, which can be used to realize the asymmetric transmission of acoustic waves. Numerical simulations show that the asymmetry is related to the properties of the host liquids and the input acoustic wave. Asymmetry can be enhanced if the maximum number density or the ambient radius of the cavitation bubbles in the low cavitation threshold liquid increases. Moreover, the direction of rectification will be reversed if the amplitude of the input acoustic wave becomes high enough.

Directional power absorption in helicon plasma sources excited by a half-helix antenna

This paper deals with the investigation of the power absorption in helicon plasma excited through a half-helix antenna driven at 13.56 MHz. The simulations were carried out by means of a code,HELIC. They were carried out by taking into account different inhomogeneous radial density profiles and for a wide range of plasma densities, from 10^（11） cm^（-3） to 10^（13） cm^（-3）. The magnetic field was 200, 400, 600 and 1000 G. A three-parameter function was used for generating various density profiles with different volume gradients, edge gradients and density widths. The density profile had a large effect on the efficient Trivelpiece–Gould（TG） and helicon mode excitation and antenna coupling to the plasma. The fraction of power deposition via the TG mode was extremely dependent on the plasma density near the plasma boundary. Interestingly, the obtained efficient parallel helicon wavelength was close to the anticipated value for Gaussian radial density profile.Power deposition was considerably asymmetric when the n/B_0 ratio was more than a specific value for a determined density width. The longitudinal power absorption was symmetric at approximately n_0 =10^（11） cm^（-3）, irrespective of the magnetic field supposed. The asymmetry became more pronounced when the plasma density was 10^（12） cm^（-3）. The ratio of density width to the magnetic field was an important parameter in the power coupling. At high magnetic fields, the maximum of the power absorption was reached at higher plasma density widths. There was at least one combination of the plasma density, magnetic field and density width for which the RF power deposition at both side of the tube reached its maximum value.

Phases-Controlled Coordinated Charging Method for Electric Vehicles

When private electric vehicles(EVs),which will be the main part of the EVs’cluster in the future,are plugged in power system by single phase power line,can result to three-phase unbalance problem of distribution network.In this work,a phased-controlled coordinated charging method was put forward to solve this problem.Firstly,the impacts of charging load to distribution network was analyzed based on the equivalent circuit;and then an architecture of the control method and its corresponding optimal control model were introduced.The optimal model is a multi-objective optimization model,which includes minimizing load variance of each phase and minimizing the power asymmetrical degree of three-phase load;lastly,three scenarios considering balance and unbalance cases were envisioned to verify the reasonableness of this control method based on IEEE-37 distribution network.Results show that the phased-controlled coordinated charging method can minimize the load variance as well as the negative sequence current.

MOCVD growth of AlGaInP/GaInP quantum well laser diode with asymmetric cladding structure for high power applications

In order to improve the characteristics of the general broad-waveguide 808-nm semiconductor laser diode （LD）, we design a new type quantum well LD with an asymmetric cladding structure. The structure is grown by metal organic chemical vapor deposition （MOCVD）. For the devices with 100-ttm-wide stripe and 1000-/zm-long cavity under continuous-wave （CW） operation condition, the typical threshold current is 190 mA, the slope efficiency is 1.31 W/A, the wall-plug efficiency reaches 63%, and the maximum output power reaches higher than 7 W. And the internal absorption value decreases to 1.5 cm^-1.

Modelling the dynamics of stock market in the gulf cooperation council countries:evidence on persistence to shocks

This study examines the statistical properties required to model the dynamics of both the returns and volatility series of the daily stock market returns in six Gulf Cooperation Council countries,namely Bahrain,Oman,Kuwait,Qatar,Saudi Arabia,and the United Arab Emirates,under different financial and economic circumstances.The empiri-cal investigation is conducted using daily data from June 1,2005 to July 1,2019.The analysis is conducted using a set of double long-memory specifications with some significant features such as long-range dependencies,asymmetries in conditional variances,non-linearity,and multiple seasonality or time-varying correlations.Our study indicates that the joint dual long-memory process can adequately estimate long-memory dynamics in returns and volatility.The in-sample diagnostic tests as well as out-of-sample forecasting results demonstrate the prevalence of the Autoregressive Fractionally Integrated Moving Average and Hyperbolic Asymmetric Power Autoregressive Conditional Heteroskedasticity modeling process over other competing models in fitting the first and the second conditional moments of the market returns.Moreover,the empirical results show that the proposed model offers an interesting framework to describe the long-range dependence in returns and seasonal persistence to shocks in conditional volatility and strongly support the estimation of dynamic returns that allow for time-varying correlations.A noteworthy finding is that the long-memory dependencies in the conditional variance processes of stock market returns appear important,asymmetric,and differ in their volatility responses to unexpected shocks.Our evidence suggests that these markets are not completely efficient in processing regional news,thus providing a sound alternative for regional portfolio diversification.

1.06 μm high-power InGaAs/GaAsP quantum well lasers

The high power and low internal loss 1.06 μm InGaAs/GaAsP quantum well lasers with asymmetric waveguide structure were designed and fabricated. For a 4000 μm cavity length and 100 μm stripe width device,the maximum output power and conversion efficiency of the device are 7.13 W and 56.4%, respectively. The cavity length dependence of the threshold current density and conversion efficiency have been investigated theoretically and experimentally; the laser diode with 4000 μm cavity length shows better characteristics than that with 3000 and 4500 μm cavity length： the threshold current density is 132.5 A/cm^2, the slope efficiency of 1.00 W/A and the junction temperature of 15.62 K were achieved.