With great power comes great responsibility:inquiry into the social roles and the power dynamics in human-AI interactions

As machines are becoming more interactive,such as Artificial Intelligence(AI)agents,the importance of interactions between humans and AI increases as a new type of communication.However,unlike most studies have examined the influence of AI on individuals,fewer studies about how human-AI interactions will impact society have been conducted.It should be acknowledged that we attribute social roles to AI when assigning social tasks,and there are power dynamics within an interaction between humans and AI because of it.Also,we should ask whether the current society is ready for AI to take responsibility for its actions.Finally,limitations on existing human-machine communication(HMC)studies,an unclear definition of AI as an interlocutor and a lack of theoretical frameworks,were pointed out with suggestions.It is expected that considering a machine’s social roles and powers in human-AI interactions will broaden the theoretical realm of HMC.

Tensile Stiffness Analysis on Ocean Dynamic Power Umbilical

Tensile stiffness of ocean dynamic power umbilical is an important design parameter for functional implementation and structural safety. A column with radial stiffness which is wound by helical steel wires is constructed to predict the tensile stiffness value of umbilicals in the paper. The relationship between the tension and axial deformation is expressed analytically so the radial contraction of the column is achieved in the relationship by use of a simple finite element method. With an agreement between the theoretical prediction and the tension test results, the method is proved to be simple and efficient for the estimation of tensile stiffness of the ocean dynamic power umbilical.

A Power Reduction Method for Pilot Channel of LEO Satellite Based on Dynamic Compensation

Since the lower power requirement of code division multiple access(CDMA) than that of other multiple access, the CDMA technology is suitable to be used in low earth orbit(LEO) satellite communication system whose space power is limited due to the small size of satellite. The pilot channel of CDMA technology is very important for earth mobile station(EMS) in LEO system to recover carrier and code, but the power requirement of pilot channel is very higher than that of other channels. In this paper, a power reduction method for pilot channel is proposed. By the new method, the power of pilot channel transmitted from LEO satellite is reduced to a lower level. For improving the signal to noise ratio(SNR) of pilot channel with lower power, coherent integration is employed in EMS at the pre-processing stage. Considering the high dynamic situation of LEO satellite, the long period of time for integration will deteriorate the receiving performance of EMS, therefore, a dynamic compensation module is added to carrier tracking loop against the high dynamic. Meanwhile, the transfer function of the new tracking loop and the condition for steadystate zero error are deduced. Numerical examples are provided to demonstrate effectiveness of the proposed approach.

Performance analysis of an improved dynamic power management model in wireless sensor node

The energy consumption in the wireless sensor networks is a very critical issue which attracts immediate attention for the sake of the growing demand of the billion dollar market in future. The Dynamic Power Management （DPM） technique is a way of controlling and saving the energy usage in a sensor node. Previously, researchers have proposed lifetime improving stochastic models for wireless sensor networks and limited work has been done focusing on the wireless sensor node. This paper proposes an analyser based Semi-Markov model for DPM in the event-driven sensor node. The power consumption comparison with previously proposed models without this analyser shows the analyser significant contributes to lifetime improvement. The improved model is more power efficient, presents how the DPM model observes the input event arrival and power states of the sensor node components, and then dynamically manages the power consumption of the overall system. Further, to observe the effect of event arrival, missed events, waiting time, processor utilization on the power consumption and lifetime, the proposed DPM system with the single server queuing model is developed.

Improving Dynamic Stability of Yunnan Provincial and South China Power System by PSS

For solving the dynamic instability problem of Yunnan Provincial Power System (YNPS) and the South China Interconnected Power System (SCIPS), Lubuge Hydropower Station was chosen to install Power System Stabilizer (PSS). This paper introduces the principles and methods of parameter selection for PSS, in addition to field test. The test results show that the PSS installed can significantly improve the system damping.

Analytical Solution for Model-Based Dynamic Power Factor Measurement in AC Resistance Spot Welding

On the basis of welding transformer circuit model, a new measuring method was proposed. This method measures the peak angle of the welding current, and then calculates the dynamic power factor in each half-wave. An artificial neural network is trained and used to generate simulation data for the analytical solution, i.e. a high-order binary polynomial, which can be easily adopted to calculate the power factor online. The tailored sensing and computing system ensures that the method possesses a real-time computational capacity and satisfying accuracy. A DSP-based resistance spot welding monitoring system was developed to perform ANN computation. The experimental results suggest that this measuring method is feasible.

Dynamic reactive power planning method for CSP-PV hybrid power generation system

Aiming at the faults of some weak nodes in the concentrated solar power-photovoltaic(CSP-PV)hybrid power generation system,it is impossible to restore the transient voltage only relying on the reactive power regulation capability of the system itself.We propose a dynamic reactive power planning method suitable for CSP-PV hybrid power generation system.The method determines the installation node of the dynamic reactive power compensation device and its compensation capacity based on the reactive power adjustment capability of the system itself.The critical fault node is determined by the transient voltage stability recovery index,and the weak node of the system is initially determined.Based on this,the sensitivity index is used to determine the installation node of the dynamic reactive power compensation device.Dynamic reactive power planning optimization model is established with the lowest investment cost of dynamic reactive power compensation device and the improvement of system transient voltage stability.Furthermore,the component of the reactive power compensation node is optimized by particle swarm optimization based on differential evolution(DE-PSO).The simulation results of the example system show that compared with the dynamic position compensation device installation location optimization method,the proposed method can improve the transient voltage stability of the system under the same reactive power compensation cost.

An In-Depth Study of Complex Power System Dynamic Behavior Characteristics for Chinese UHV Power Grid Security

In this paper,a series of major policy decisions used to improve the power grid reliability,reduce the risk and losses of major power outages,and realize the modernization of 21st century power grid are discussed. These decisions were adopted by American government and would also be helpful for the strategic development of Chinese power grid. It is proposed that China should take precaution,carry out security research on the overall dynamic behaviour characteristics of the UHV grid using the complexity theory,and finally provide safeguard for the Chinese UHV grid. It is also pointed out that,due to the lack of matured approaches to controll a cascading failure,the primary duty of a system operator is to work as a "watchdog" for the grid operation security,eliminate the cumulative effect and reduce the risk and losses of major cascading outages with the help of EMS and WAMS.

Dynamic Power Dissipation Control Method for Real-Time Processors Based on Hardware Multithreading

In order to eliminate the energy waste caused by the traditional static hardware multithreaded processor used in real-time embedded system working in the low workload situation, the energy efficiency of the hardware multithread is discussed and a novel dynamic multithreaded architecture is proposed. The proposed architecture saves the energy wasted by removing idle threads without manipulation on the original architecture, fulfills a seamless switching mechanism which protects active threads and avoids pipeline stall during power mode switching. The report of an implemented dynamic multithreaded processor with 45 nm process from synthesis tool indicates that the area of dynamic multithreaded architecture is only 2.27% higher than the static one in achieving dynamic power dissipation, and consumes 1.3% more power in the same peak performance.

Most Suitable Power System Stabilizer Selection for the Improvement of Dynamic Stability

A method of enhancing power system stability for a single machine to infinite bus power system is presented. The technique used compromises the effectiveness of Proportional-Integral-Derivative controller （PID）. In order to satisfy the damping characteristics for the proposed power system over a wide range of operating interval, rotational speed, torque angle and terminal voltage signals of the synchronous machine are utilized as control signals of the system. It is well known that these variables have significant effects on damping the generators shaft mechanical oscillations, it＇ll be so easy to validate the most suitable controller as seen from the simulation results.

Cooperative Relaying in a Three User Downlink NOMA System Using Dynamic Power Allocation

Non-orthogonal multiple access(NOMA)represents the latest addition to the array of multiple access techniques,enabling simultaneous servicing of multiple users within a singular resource block in terms of time,frequency,and code.A typical NOMA configuration comprises a base station along with proximate and distant users.The proximity users experience more favorable channel conditions in contrast to distant users,resulting in a compromised performance for the latter due to the less favorable channel conditions.When cooperative communication is integrated with NOMA,the overall system performance,including spectral efficiency and capacity,is further elevated.This study introduces a cooperative NOMA setup in the downlink,involving three users,and employs dynamic power allocation(DPA).Within this framework,User 2 acts as a relay,functioning under the decode-and-forward protocol,forwarding signals to both User 1 and User 3.This arrangement aims to bolster the performance of the user positioned farthest from the base station,who is adversely affected by weaker channel conditions.Theoretical and simulation outcomes reveal enhancements within the system’s performance.

Application study of dynamic voltage scaling policies

Based on the fundamental relationship among the circuit power, the circuit delay and the supply voltage, four theorems associated with the application of dynamic voltage scaling （DVS） policies are proposed and proved. First, the existence characteristics of the optimal supply voltage for a single task are proved, which suggests that the optimal supply voltage for the single task should be selected only within a one-dimensional term, and the corresponding task end time by the optimal supply voltage should be identical with its deadline. Then, it is pointed out that the minimum energy consumption that the DVS policy can obtain when completing a single task is certainly lower than that of the dynamic power management （DPM） policy or the combined DVS＋DPM policy under the same conditions. Finally, the theorem of energy consumption minimization for a multi-task group is proposed, which declares that it is necessary to keep the processor in the execution state during the whole task period to obtain the minimum energy consumption, while satisfying the deadline constraints of any task.

Parallel Dispatch:A New Paradigm of Electrical Power System Dispatch

Modern power systems are evolving into sociotechnical systems with massive complexity, whose real-time operation and dispatch go beyond human capability. Thus,the need for developing and applying new intelligent power system dispatch tools are of great practical significance. In this paper, we introduce the overall business model of power system dispatch, the top level design approach of an intelligent dispatch system, and the parallel intelligent technology with its dispatch applications. We expect that a new dispatch paradigm,namely the parallel dispatch, can be established by incorporating various intelligent technologies, especially the parallel intelligent technology, to enable secure operation of complex power grids,extend system operators' capabilities, suggest optimal dispatch strategies, and to provide decision-making recommendations according to power system operational goals.

An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency, therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements. The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a global bus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided design of nanometer scale on-chip buses.

Seismic Deformation and Seismic Resistance Analysis of Shapai Roller Compacted Concrete Arch Dam Based on Field Monitoring and Dynamic Finite Element Method

Shapai Roller Compacted Concrete(RCC) Arch Dam is the highest RCC arch dam of the 20th century in the world with a maximum height of 132m,and it is the only concrete arch dam near the epicentre of Wenchuan earthquake on May 12th,2008.The seismic damage to the dam and the resistance of the dam has drawn great attention.This paper analyzed the response and resistance of the dam to the seismic wave using numerical simulations with comparison to the monitored data.The field investigation after the earthquake and analysis of insitu data record showed that there was only little variation in the opening size at the dam and foundation interface,transverse joints and inducing joints before and after the earthquake.The overall stability of the dam abutment resistance body was quite good except a little relaxation was observed.The results of the dynamic finite element method(FEM) showed that the sizes of the openings obtained from the numerical modeling are comparable with the monitored values,and the change of the opening size is in millimeter range.This study revealed that Shapai arch dam exhibited high seismic resistance and overload capacity in the Wenchuan earthquake event.The comparison of the monitored and simulated results showed that the numerical method applied in this paper well simulated the seismic response of the dam.The method could be useful in the future application on the safety evaluation of RCC dams.

Data-driven modeling of power system dynamics:Challenges,state of the art,and future work

With the continual deployment of power-electronics-interfaced renewable energy resources,increasing privacy concerns due to deregulation of electricity markets,and the diversification of demand-side activities,traditional knowledge-based power system dynamic modeling methods are faced with unprecedented challenges.Data-driven modeling has been increasingly studied in recent years because of its lesser need for prior knowledge,higher capability of handling large-scale systems,and better adaptability to variations of system operating conditions.This paper discusses about the motivations and the generalized process of datadriven modeling,and provides a comprehensive overview of various state-of-the-art techniques and applications.It also comparatively presents the advantages and disadvantages of these methods and provides insight into outstanding challenges and possible research directions for the future.

Designing an Effective Method for Automatic Electric Vehicle Charging Stations in a Static Environment

This article outlines an Effective Method for Automatic Electric Vehicle Charging Stations in a Static Environment. It consists of investigated wireless transformer structures with various ferrite forms. WPT technology has rapidly advanced in the last few years. At kilowatt power levels, the transmission distance grows from a few millimeters to several hundred millimeters with a grid to load efficiency greater than 90%. The improvements have made the WPT more appealing for electric vehicle (EV) charging applications in both static and dynamic charging scenarios. Static and dynamic WEVCS, two of the main applications, are described, and current developments with features from research facilities, academic institutions, and businesses are noted. Additionally, forthcoming concepts based WEVCS are analyzed and examined, including “dynamic” wireless charging systems (WCS). A dynamic wireless power transfer (DWPT) system, which can supply electricity to moving EVs, is one of the feasible alternatives. The moving secondary coil is part of the dynamic WPT system, which also comprises of many fixed groundside (primary) coils. An equivalent circuit between the stationary system and the dynamic WPT system that results from the stationary system is demonstrated by theoretical investigations. The dynamic WPT system’s solenoid coils outperform circular coils in terms of flux distribution and misalignment. The WPT-related EV wireless charging technologies were examined in this study. WPT can assist EVs in overcoming their restrictions on cost, range, and charging time.

Multi-objective Dynamic Optimal Power Flow of Wind Integrated Power Systems Considering Demand Response

This paper studies the economic environmental energy-saving day-ahead scheduling problem of power systems considering wind generation(WG)and demand response(DR)by means of multi-objective dynamic optimal power flow(MDOPF).Within the model,fuel cost,carbon emission and active power losses are taken as objectives,and an integrated dispatch modeof conventional coal-fired generation,WG and DRis utilized.The corresponding solution process to the MDOPF is based on ahybrid of a non-dominated sorting genetic algorithm-II(NSGA-II)and fuwzy satisfaction-maximizing method,where NSGA-II obtains the Pareto frontier and the fuzzy satisfaction-maximizing method is the chosen strategy.Illustrative cases of different scenarios are performed based on an IEEE 6-units\,30-nodes system,to verify the proposed model and the solution process,as well as the benefits obtained by the DR into power system.

Exploration of Artificial-intelligence Oriented Power System Dynamic Simulators

With the rapid development of artificial intelligence(AI),it is foreseeable that the accuracy and efficiency of dynamic analysis for future power system will be greatly improved by the integration of dynamic simulators and AI.To explore the interaction mechanism of power system dynamic simulations and AI,a general design for AI-oriented power system dynamic simulators is proposed,which consists of a high-performance simulator with neural network supportability and flexible external and internal application programming interfaces(APIs).With the support of APIs,simulation-assisted AI and AIassisted simulation form a comprehensive interaction mechanism between power system dynamic simulations and AI.A prototype of this design is implemented and made public based on a highly efficient electromechanical simulator.Tests of this prototype are carried out in four scenarios including sample generation,AI-based stability prediction,data-driven dynamic component modeling,and AI-aided stability control,which prove the validity,flexibility,and efficiency of the design and implementation for AI-oriented power system dynamic simulators.

Study on Energy Conversion Characteristics in Volute of Pump as Turbine

A volute is a curved funnel with cross-sectional area increasing towards the discharge port.The volute of a centrifugal pump is the casing hosting the fluid being pumped by the impeller.In Pump-as-turbine devices(PAT),vice versa the volute plays the role of energy conversion element.In the present analysis,this process is analyzed using CFD.The results show that in the contraction section of volute the conversion between dynamic pressure energy and static pressure energy essentially depends on the reduction of flow area,while in the spiral section,frictional losses also play a significant role.From the throat to the end of the volute,the flow decreases in a wave-like manner.