The changing process and trend of ground temperature around tower foundations of Qinghai-Tibet Power Transmission line

After the construction of Qinghai-Tibet Highway and Railway, the Qinghai-Tibet Power Transmission(QTPT) line is another major permafrost engineering project with new types of engineering structures. The changing process and trend of ground temperature around tower foundations are crucial for the stability of QTPT. We analyzed the change characteristics and tendencies of the ground temperature based on field monitoring data from 2010 to 2014. The results reveal that soil around the tower foundations froze and connected with the artificial permafrost induced during the construction of footings after the first freezing period, and the soil below the original permafrost table kept freezing in subsequent thawing periods. The ground temperature lowered to that of natural fields, fast or slowly for tower foundations with thermosyphons,while for tower foundations without thermosyphons, the increase in ground temperature resulted in higher temperature than that of natural fields. Also, the permafrost temperature and ice content are significant factors that influence the ground temperature around tower foundations. Specifically, the ground temperature around tower foundations in warm and ice-rich permafrost regions decreased slowly, while that in cold and ice poor permafrost regions cooled faster. Moreover, foundations types impacted the ground temperature, which consisted of different technical processes during construction and variant of tower footing structures. The revealed changing process and trend of the ground temperature is beneficial for evaluating the thermal regime evolution around tower foundations in the context of climate change.

Research on single hole heat transfer power of ground source heat pump system

In this paper,the single hole heat transfer power of the ground source heat pump system in Hengshui is compared with data gained from thermal response test.The results show that maximum monitoring data of heat transfer power per meter in summer is 97.1% of the test data,and the average value accounts for 81.8%.The per meter heat power data through on-site thermal response test can provide references for designing engineering project and optimizing ground source heat pump system as these data do not vary greatly from the actual monitoring data.

Effect of Partial Ground Plane Removal on the Radiation Characteristics of a Microstrip Antenna

This study presents a new, simple method for reducing the back-lobe radiation of a microstrip antenna (MSA) by a partially removed ground plane of the antenna. The effect of the partial ground plane removal in different configurations on the radiation characteristics of a MSA are investigated numerically. The partial ground plane removal reduces the backlobe radiation of the MSA by suppressing the surface wave diffraction from the edges of the antenna ground plane. For further improving the front-to-back (F/B) ratio of the MSA, a new soft-surface configuration consisting of an array of stand-up split ring resonators (SRRs) are placed on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 9.7 dB has been achieved experimentally for our proposed MSA.

Amplification of in-plane seismic ground motion by group cavities in layered half-space (Ⅱ): with saturated poroelastic soil layers

As the continuation study on amplification of in-plane seismic ground motion by underground group cavities in layered half-space, this study extends to the case of poroelastic half-space with dry poroelastic and saturated poroelastic soil layers. The influence of poroelastic layers on the amplification of seismic ground motion is studied both in frequency domain and time domain using indirect boundary element method （IBEM）. It is shown that for the example of a saturated poroelastic site in Tianjin under the excitation of Taft wave and E1 Centro wave, the amplification of seismic ground motion in poroelastic case is slightly smaller than that in the elastic case, and the amplification of PGA （peak ground acceleration） and its PRS （peak response spectrum）.. can be increased up to 38.8% and 64.6%; the predominant period of response spectra in poroelastic case becomes shorter to some extent compared with that in the elastic case. It is suggested that the effect of underground group cavities in poroelastic half-space on design seismic ground motion should be considered.

Amplification of in-plane seismic ground motion by group cavities in layered half-space (Ⅰ)

Amplification of in-plane seismic ground motion by underground group cavities in layered half-space is studied both in frequency domain and time domain by using indirect boundary element method （IBEM）, and the effect of cavity interval and spectrum of incident waves on the amplification are studied by numerical examples. It is shown that there may be large interaction between cavities, and group cavities with certain intervals may have significant amplification to seismic ground motion. The amplification of PGA （peak ground acceleration） and its PRS （peak response spectrum） can be increased up to 45.2% and 84.4%, for an example site in Tianjin, under the excitation of Taft wave and E1 Centro wave; and group cavities may also affect the spectra of the seismic ground motion. It is suggested that the effect of underground group cavities on design seismic ground motion should be considered.

Simplified triangular ground plane cloak by oblique multilayer dielectrics

Based on the effective medium theory, the triangular ground plane cloak can be realized by thin layered systems. Two solutions of parameter setting of the layered cloak are suggested to demonstrate the invisibility performance of a hybrid incoming wave. The hybrid parameters are derived from the equivalent of both anisotropies of permittivity and permeability to the Mternating layers. The performance of the designed layered cloak is validated by both TM and TE wave simulations with near-field distributions and average scattering power outflows on an observation semicircle. From the simulation results, the layered cloak with both hybrid parameters and improved hybrid parameters can reflect the incoming TM/TE waves in a specular direction, and the latter behaves with a better overall invisibility performance.

The Research of Voltage Sag and Power Frequency Overvoltage on 110kV Resistance Grounding System

This paper researches the voltage transfer characteristics when one-phase ground fault occurred in the resistance grounding system, by using the theory of the asymmetric variable characteristics and the sequence network analysis of the -11 transformer, and concludes the scope of voltage sag and swell and the degree of power frequency overvoltage and their influencing factors in the 110 kV resistance grounding system. Accordingly this paper puts forward the resistance choosing principle: the resistance grounding coefficient must be equal to or greater than 10. So it can not only wipe out the voltage sag and voltage swell but also make sure the overvoltage is limited to electrical equipment allowing range. The method mentioned above is verified by simulation results of a 110 kV power system in ATP.

The Stress-strain Analysis for the Linearly Elastic and Power Hardening of Strength Difference Plane Structure of Bars Jointed to a Rigid-body

The plane structure of bars jointed to a rigid-body is a complex and universal structure.Some other structure of bars can be considered as its special cases. Many material have different stress-strain relation in tension and compression, generally the relation is nonlinear. In this paper,we use the constitutive model of linearly elastic and power hardening of strength difference to analyze plane structure of bars. The displacement method is used to derive the universal expression of calculating stress and strain. The nonlinear equations for computing displacements of the rigid-body has been given and general computing program has been worked out. This problem has been solved satisfactorily.

General solutions of plane problem for power function curved cracks

A new exact and universal conformal mapping is proposed. Using Muskhelishvili＇s complex potential method, the plane elasticity problem of power function curved cracks is investigated with an arbitrary power of a natural number, and the general solutions of the stress intensity factors （SIFs） for mode I and mode II at the crack tip are obtained under the remotely uniform tensile loads. The present results can be reduced to the well-known solutions when the power of the function takes different natural numbers. Numerical examples are conducted to reveal the effects of the coefficient, the power, and the projected length along the x-axis of the power function curved crack on the SIFs for mode I and mode II.

Rectangular Microstrip Antenna on Ridge Ground Plane to Control the Resonant Modes for Improved Bandwidth using Transverse Resonance Method

A single layer single element rectangular microstrip antenna on ridge ground plane for improved bandwidth is theoretically investigated with a view to develop a concrete physical insight in to the phenomenon. The simple single element probe fed rectangular microstrip antenna fabricated on conventional PTFE (Poly Tetra Fluride Ethelene) substrate have many advantages except its narrow bandwidth. The present study proposes the technique to control the resonant modes of a microstrip antenna for yielding better bandwidth using transverse resonance method. The present antenna is designed to fabricate on ridge ground plane which has been compared with conventional structure and around 6% - 7% improvement in bandwidth is revealed. The detailed variation of radiation pattern across its frequency band has been studied and presented in this paper. The proposed idea has been verified through a commercial software package (High Frequency Structure Simulator) for a patch operating in X band and explained quantitatively. The electric surface current distribution over the patch surface for both the conventional and proposed antenna is presented to explain the broad banding effect physically.

Texture Feature Extraction Method for Ground Nephogram Based on Contourlet and the Power Spectrum Analysis Algorithm

It is important to extract texture feature from the ground-base cloud image for cloud type automatic detection.In this paper,a new method is presented to capture the contour edge,texture and geometric structure of cloud images by using Contourlet and the power spectrum analysis algorithm.More abundant texture information is extracted.Cloud images can be obtained a multiscale and multidirection decomposition.The coefficient matrix from Contourlet transform of ground nephogram is calculated.The energy,mean and variance characteristics calculated from coefficient matrix are composed of the feature information.The frequency information of the data series from the feature vector values is obtained by the power spectrum analysis.Then Support Vector Machines(SVM)classifier is used to classify according to the frequency information of the trend graph of data series.It is shown that altocumulus and stratus with different texture frequencies can be effectively recognized and further subdivided the types of clouds.

Stitched Ground Planes for Textile Antenna Application: An Experimental Study

This paper presents an application of stitched ground plane for microstrip patch antenna design. In this work Matlab interface to computer embroidery techniques were used to implement the felt and denim substrates on microstrip patch antenna. These antennas were simulated using a commercial full 3D electromagnetic CST Microwave Studio 2019. A method to optimize the stitch patterns with conductive thread for antenna ground plane for 2.45 GHz industrial, scientific, and medical (ISM) band and 5 GHz wearable wireless local area networks (WLAN) frequencies was achieved. Rigid and flexible wearable antennas (microstrip patch antennas) were fabricated using the stitched ground plane. The electrical resistance was reduced between the meshes during the stitching design process. Results in terms of bandwidth, radiation patterns and reflection coefficients (S11) are presented.

Novel Stitched Ground Plane Optimizations for Microstrip Patch Antennas at Wi-Fi and WiMAX Applications

This work explores the optimal mesh structure, stitch density and production technique of stitched ground plane for microstrip patch antenna. Meshed ground plane was used as a generic problem. A stitched ground plane is pro-posed and designed using Matlab interface to computer embroidery. Using the meshed or stitched ground plane as a case study, the resistance between meshes was analysed and measured. The equivalent resistance between nodes is a function of their distance apart. A finite resistive grid was simulated and compared to measured sets of data. A microstrip patch antenna with stitched ground shows comparable performance to the conventional etched ground of the size in terms of bandwidth. The stitched ground plane has a higher band-width than the etched copper ground plane because of the increased thickness of the substrate. Thus, it can be concluded that the use of the interface method shows the possibilities of controlling the stitch density and distances between mesh nodes. The interface increases the stitching density and reduces the elec-trical resistance between mesh nodes making the antennas flexible and weara-ble. The functionality of these antenna samples has been tested and validated using microstrip patch ground at 2.45 GHz and 5 GHz. Measurement results on the proposed stitched ground planes were compared with the theory of infinite resistive network that shows good agreement.

Protection of Zero-Sequence Power Variation in Mountain Wind Farm Collector Lines Based on Multi-Mode Grounding

The arc-suppression coil(ASC)in parallel low resistance(LR)multi-mode grounding is adopted in the mountain wind farm to cope with the phenomenon that is misoperation or refusal of zero-sequence protection in LR grounding wind farm.If the fault disappears before LR is put into the system,it is judged as an instantaneous fault;while the fault does not disappear after LR is put into the system,it is judged as a permanent fault;the single-phase grounding fault(SLG)protection criterion based on zerosequence power variation is proposed to identify the instantaneous-permanent fault.Firstly,the distribution characteristic of zero-sequence voltage(ZSV)and zero-sequence current(ZSC)are analyzed after SLGfault occurs in multi-mode grounding.Then,according to the characteristics that zero-sequence power variation of non-fault collector line is small,while the zero-sequence power variation of fault collector line can reflect the active power component of fault resistance,the protection criterion based on zero-sequence power variation is constructed.The theoretical analysis and simulation results show that the protection criterion can distinguish the property of fault only by using the single terminal information,which has high reliability.

Comments on “General solutions of plane problem for power function curved cracks”

An error has been found in Ref. [1]. In the case of n = 2, authors of Ref. [1] suggested the following conformal mapping function：

Regional Finite-Fault Source Model for Development of Ground Motion Attenuation Relationship in Sichuan, China

The attenuation relationship of ground motion based on seismology has always been a front subject of engineering earthquake.Among them,the regional finite-fault source model is very important.In view of this point,the general characteristics of regional seism-tectonics,including the dip and depth of the fault plane,are emphasized.According to the statistics of regional seism-tectonics and focal mechanisms in Sichuan,China,and the sensitivity of estimated peak ground acceleration(PGA)attenuation is analyzed,and the dip angle is taken as an average of 70°.Based the statistics of the upper crustal structure and the focal depth of regional earthquakes,the bottom boundary of the sedimentary cover can be used as the upper limit for estimating the depth of upper-edge.The analysis shows that this value is sensitive to PGA.Based on the analysis of geometric relations,the corresponding calculation formula is used,and a set of concepts and steps for building the regional finite-fault source model is proposed.The estimation of source parameters takes into account the uncertainty,the geometric relationship among parameters and the total energy conservation.Meanwhile,a set of reasonable models is developed,which lay a foundation for the further study of regional ground motion attenuation based on seismology.

Analysis on the Irregular and Asymmetrical Power/Ground Structure by PEEC Modeling

In order to provide some reference for the design of the power/ground system, a complicated power/ground system in time and frequency domains was analyzed, which is based on PEEC (Partial Element Equivalent Circuit). According to the actual requirements, characteristics of some common power/ground structures in time and frequency domains, such as SSN (Simultaneous Switching Noise), are obtained for the future research. The results show the first resonance point is changed with the structure of the power/ground networks.

Study on Site Specific Design Earthquake Ground Motion of Nuclear Power Plants in China

The main technical backgrounds and requirements are introduced with regard to earthquake ground motion design parameters in several domestic and American standards,codes and guides involved in the seismic analysis and design activities of nuclear power plants in China.Based on the research results from site seismic safety evaluation of domestic nuclear power plant projects in the last years,characteristics and differences of site specific design spectra are analyzed in comparison with standard response spectra,and the suitability of standard response spectra for domestic nuclear power plant projects is discussed.

道路地下空洞探地雷达波场和时频特性

根据城市道路地下介质的分布特征和电性参数设计模型,采用时域有限差分法和广义S变换,对道路地下存在的充气空洞、充水空洞、回填不密实、埋藏金属物状态进行探地雷达正演模拟和时频特征提取。结果表明,地下空洞顶界面的反射波同相轴均呈弧形反射形态,但充气空洞的反射波能量强于充水空洞;地下空洞发育区域的中心频率集中在某个低频区间,其余频率成分分布较均匀;埋藏金属物区域出现两簇高幅值能量团,频率分布较分散;回填不密实区域频率未能显示出较明显的规律。最后,通过工程实测验证了数值模拟的可靠性。