动脉粥样硬化是心血管疾病重要的病理生理基础,延缓和防治动脉粥样硬化对于减少和降低心血管疾病的发病率及病死率具有重要意义。高密度脂蛋白(high density lipoprotein,HDL)通过参与介导胆固醇逆向转运(reverse cholesterol transport...动脉粥样硬化是心血管疾病重要的病理生理基础,延缓和防治动脉粥样硬化对于减少和降低心血管疾病的发病率及病死率具有重要意义。高密度脂蛋白(high density lipoprotein,HDL)通过参与介导胆固醇逆向转运(reverse cholesterol transport,RCT)在抗动脉粥样硬化的形成和进展中发挥了重要作用。Preβ-1高密度脂蛋白(prebeta-1 high density lipoprotein,Preβ-1HDL)作为HDL的一种亚类,是外周细胞移出胆固醇的最初接受体,直接参与了RCT的起始步骤,并在随后的胆固醇酯化及转运中起着重要作用。本文就Preβ-1HDL的结构、代谢及其与心血管疾病的关系作一简要综述。展开更多
The effects of pre-deformation and strain rate on the stress corrosion cracking （SCC） behavior of aluminum alloy 2519 in air and in 3.5% NaCI water solution were investigated by means of slow strain rate tension （S...The effects of pre-deformation and strain rate on the stress corrosion cracking （SCC） behavior of aluminum alloy 2519 in air and in 3.5% NaCI water solution were investigated by means of slow strain rate tension （SSRT）, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM）. The results indicate that the alloy is susceptible to SCC in 3.5% NaCI water solution and not in air. At the same pre-deformation, the alloy is more susceptible to SCC at 1.33 × 10^-5 s^-1 than at 6.66 × 10^-5 s^-1. Moreover, it is more susceptible to SCC at free pre-deformation than at 10% pre-deformation at the same strain rate. The number of 0 precipitated along the grain boundaries is reduced and distributed discontinuously, at the same time, the precipitate-free zones （PFZ） become narrow and the susceptibility to stress corrosion cracking is reduced after 10% pre-deformation.展开更多
The effect of strain rate on plasticity has been Investigat-ed for three metallic materials with dynamic tension tech-nique. A phenomenon of high strain induced plasticity -increasing was found for tested materials. T...The effect of strain rate on plasticity has been Investigat-ed for three metallic materials with dynamic tension tech-nique. A phenomenon of high strain induced plasticity -increasing was found for tested materials. The elongation of quenched 30CrMnSiNi2A is 14. 5% under 40 m/s loading rate which is more than two times of the 7 % un-der 0. 5 mm/min. This typic high strain rate induced plasticity - Increasing phenomenon is associated with adiabatic heating, strain twinning and suppression of strain - induced - phase transformation.展开更多
文摘动脉粥样硬化是心血管疾病重要的病理生理基础,延缓和防治动脉粥样硬化对于减少和降低心血管疾病的发病率及病死率具有重要意义。高密度脂蛋白(high density lipoprotein,HDL)通过参与介导胆固醇逆向转运(reverse cholesterol transport,RCT)在抗动脉粥样硬化的形成和进展中发挥了重要作用。Preβ-1高密度脂蛋白(prebeta-1 high density lipoprotein,Preβ-1HDL)作为HDL的一种亚类,是外周细胞移出胆固醇的最初接受体,直接参与了RCT的起始步骤,并在随后的胆固醇酯化及转运中起着重要作用。本文就Preβ-1HDL的结构、代谢及其与心血管疾病的关系作一简要综述。
基金financially supported by the State Key Fundamental Research Program of China (No. 2005CB623706)
文摘The effects of pre-deformation and strain rate on the stress corrosion cracking （SCC） behavior of aluminum alloy 2519 in air and in 3.5% NaCI water solution were investigated by means of slow strain rate tension （SSRT）, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM）. The results indicate that the alloy is susceptible to SCC in 3.5% NaCI water solution and not in air. At the same pre-deformation, the alloy is more susceptible to SCC at 1.33 × 10^-5 s^-1 than at 6.66 × 10^-5 s^-1. Moreover, it is more susceptible to SCC at free pre-deformation than at 10% pre-deformation at the same strain rate. The number of 0 precipitated along the grain boundaries is reduced and distributed discontinuously, at the same time, the precipitate-free zones （PFZ） become narrow and the susceptibility to stress corrosion cracking is reduced after 10% pre-deformation.
文摘The effect of strain rate on plasticity has been Investigat-ed for three metallic materials with dynamic tension tech-nique. A phenomenon of high strain induced plasticity -increasing was found for tested materials. The elongation of quenched 30CrMnSiNi2A is 14. 5% under 40 m/s loading rate which is more than two times of the 7 % un-der 0. 5 mm/min. This typic high strain rate induced plasticity - Increasing phenomenon is associated with adiabatic heating, strain twinning and suppression of strain - induced - phase transformation.
