The bolt support quality of coal roadways is one of the important factors for the efficiency and security of coal production. By means of a self-developed technique and equipment of random non-destructive testing, non...The bolt support quality of coal roadways is one of the important factors for the efficiency and security of coal production. By means of a self-developed technique and equipment of random non-destructive testing, non-destructive detection and pre-warning analysis on the quality of bolt support in deep roadways of mining districts were performed in a number of mining areas. The measured data were obtained in the detection instances of abnormal in-situ stress and support invalidation etc. The corresponding relation between axial bolt load variation and roadway surrounding rock deformation and stability was summarized in different mining service stages. Pre-warning technology of roadway surrounding rock stability is proposed based on the detection of axial bolt load. Meanwhile, pre-warning indicators of axial bolt load in different mining service stages are offered and some successful pre-warning cases are also illustrated.The research results show that the change rules of axial bolt load in different mining service stages are quite similar in different mining areas. The change of axial bolt load is in accord with the adjustment of surrounding rock stress, which can consequently reflect the deformation and stability state of roadway surrounding rock. Through the detection of axial bolt load in different sections of roadways, the status of real-time bolt support quality can be reflected; meanwhile, the rationality of bolt support design can be evaluated which provides reference for bolting parameters optimization.展开更多
The synthetic making test has been widely used in evaluating the break ability of high-voltage circuit breaker. However, the test research and application are still inadequate, especially in the condition of rated vol...The synthetic making test has been widely used in evaluating the break ability of high-voltage circuit breaker. However, the test research and application are still inadequate, especially in the condition of rated voltage. According to the realistic conditions of test stations in China, a control device based on pre-arcing current detection and phase control is proposed in this paper. A sample of the control device made up of DSP TMS320LF2407A is fabricated, in which the CPLD MAX7064 is used to transmit signals for EMC design. It can be applied in full voltage synthetic making test at a level of 126kV/63kA. The test results show that, it is accurate to control the making phase of the applied voltage, whether the closing is demanded at voltage peak or zero.展开更多
动脉粥样硬化是心血管疾病重要的病理生理基础,延缓和防治动脉粥样硬化对于减少和降低心血管疾病的发病率及病死率具有重要意义。高密度脂蛋白(high density lipoprotein,HDL)通过参与介导胆固醇逆向转运(reverse cholesterol transport...动脉粥样硬化是心血管疾病重要的病理生理基础,延缓和防治动脉粥样硬化对于减少和降低心血管疾病的发病率及病死率具有重要意义。高密度脂蛋白(high density lipoprotein,HDL)通过参与介导胆固醇逆向转运(reverse cholesterol transport,RCT)在抗动脉粥样硬化的形成和进展中发挥了重要作用。Preβ-1高密度脂蛋白(prebeta-1 high density lipoprotein,Preβ-1HDL)作为HDL的一种亚类,是外周细胞移出胆固醇的最初接受体,直接参与了RCT的起始步骤,并在随后的胆固醇酯化及转运中起着重要作用。本文就Preβ-1HDL的结构、代谢及其与心血管疾病的关系作一简要综述。展开更多
Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed th...Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.展开更多
To determine whether a given deterministic nonlinear dynamic system is chaotic or periodic, a novel test approach named zero-one （0-1） test has been proposed recently. In this approach, the regular and chaotic motio...To determine whether a given deterministic nonlinear dynamic system is chaotic or periodic, a novel test approach named zero-one （0-1） test has been proposed recently. In this approach, the regular and chaotic motions can be decided by calculating the parameter K approaching asymptotically to zero or one. In this study, we focus on the 0-1 test algorithm and illustrate the selection of parameters of this algorithm by numerical experiments. To validate the reliability and the universality of this algorithm, it is applied to typical nonlinear dynamic systems, including fractional-order dynamic system.展开更多
The current research of machine center accuracy in workspace mainly focuses on the poor geometric error subjected to thermal and gravity load while in operation, however, there are little researches focusing on the ef...The current research of machine center accuracy in workspace mainly focuses on the poor geometric error subjected to thermal and gravity load while in operation, however, there are little researches focusing on the effect of machine center elastic deformations on workspace volume. Therefore, a method called pre-deformation for assembly performance is presented. This method is technically based on the characteristics of machine tool assembly and collaborative computer-aided engineering （CAE） analysis. The research goal is to enhance assembly performance, including straightness, positioning, and angular errors, to realize the precision of the machine tool design. A vertical machine center is taken as an example to illustrate the proposed method. The concept of travel error is defined to obtain the law of the guide surface. The machine center assembly performance is analyzed under cold condition and thermal balance condition to establish the function of pre-deformation. Then, the guide surface in normal direction is processed with the pre-deformation function, and the machine tool assembly performance is measured using a laser interferometer. The measuring results show that the straightness deviation of the Z component in the Y-direction is 158.9% of the allowable value primarily because of the gravity of the spindle head, and the straightness of the X and Y components is minimal. When the machine tool is processed in pre-deformation, the straightness of the Z axis moving component is reduced to 91.2%. This research proposes a pre-deformation machine center assembly method which has sufficient capacity to improving assembly accuracy of machine centers.展开更多
A combined experimental and computational study was carried out to investigate ballistic performance of laterally preload compressed SiC tile against long rod impact. A 100 x 100 by 20 mm thick SiC tile was pushed int...A combined experimental and computational study was carried out to investigate ballistic performance of laterally preload compressed SiC tile against long rod impact. A 100 x 100 by 20 mm thick SiC tile was pushed into a 5 mm thick steel frame at high temperature of 430 ℃ so that after cool down to room temperature, the lateral preload compressive stress was developed in the SiC tiles. Depth of penetration tests of the SiC tiles with and without pre-stress were performed, where tungsten alloy long rods at a nominal velocity of 1240 m/s were launched to hit the SiC tiles backed by the steel blocks. Compared with the SiC tiles without any pre-stress, the pre-compressed SiC tiles were found to reduce significantly the residual penetration in the backing block. Simulations were carried out using the LS-dyna hydrocode,taking account of preload stress. The simulations showed that the lateral preload compression strengthened the intact SiC tiles and dwell occurred in the early penetration stage, eroding the striking long rod efficiently.展开更多
Objective:To elucidate the awareness and approach to pre-operative human immunodeficiency virus(HIV) testing and emphasis on the attendant components of HIV testing.Methods: The study was conducted at the theatres of ...Objective:To elucidate the awareness and approach to pre-operative human immunodeficiency virus(HIV) testing and emphasis on the attendant components of HIV testing.Methods: The study was conducted at the theatres of the University of Port Harcourt Teaching Hospital among 123 nursing,anaesthetic,and operating staff.A descriptive cross sectional design was adopted with stratified sampling.The study instrument was a structured,self administered pro forma.Results:All respondents were all aware of HIV infection and all had transmission through infected blood and tissues(100.0%).88.6%had infection through needle stick injuries, 62.6%through vertical transmission,and 98.4%through blood transfusion.Sixty three percent of respondents correctly knew what preoperative testing was,while 58.5%were aware of the preoperative testing policy of the hospital.All respondents favoured the policy of preoperative testing.Attitudinal values to seropositive patients were not very different as 72.4%of respondents claimed they treated every patient as high risk,and all respondents used personal protective equipment.Conclusions:Routine HIV testing now represents a conventional means providing patients with knowledge of their HIV status.Such testing should be accompanied by informed consent,counselling,confidentiality,protection,and access to treatment.展开更多
基金the State Key Research Development Program of China(No.2016YFC0600705)the Fundamental Research Funds for the Central Universities(No.2015XKZD06)+1 种基金the National Natural Science Foundation of China(Nos.51227003,51404250,51504243,51474215,51404262 and 51323004)the Natural Science Foundation of Jiangsu Province,China(Nos.BK20150191 and BK20140213)
文摘The bolt support quality of coal roadways is one of the important factors for the efficiency and security of coal production. By means of a self-developed technique and equipment of random non-destructive testing, non-destructive detection and pre-warning analysis on the quality of bolt support in deep roadways of mining districts were performed in a number of mining areas. The measured data were obtained in the detection instances of abnormal in-situ stress and support invalidation etc. The corresponding relation between axial bolt load variation and roadway surrounding rock deformation and stability was summarized in different mining service stages. Pre-warning technology of roadway surrounding rock stability is proposed based on the detection of axial bolt load. Meanwhile, pre-warning indicators of axial bolt load in different mining service stages are offered and some successful pre-warning cases are also illustrated.The research results show that the change rules of axial bolt load in different mining service stages are quite similar in different mining areas. The change of axial bolt load is in accord with the adjustment of surrounding rock stress, which can consequently reflect the deformation and stability state of roadway surrounding rock. Through the detection of axial bolt load in different sections of roadways, the status of real-time bolt support quality can be reflected; meanwhile, the rationality of bolt support design can be evaluated which provides reference for bolting parameters optimization.
文摘The synthetic making test has been widely used in evaluating the break ability of high-voltage circuit breaker. However, the test research and application are still inadequate, especially in the condition of rated voltage. According to the realistic conditions of test stations in China, a control device based on pre-arcing current detection and phase control is proposed in this paper. A sample of the control device made up of DSP TMS320LF2407A is fabricated, in which the CPLD MAX7064 is used to transmit signals for EMC design. It can be applied in full voltage synthetic making test at a level of 126kV/63kA. The test results show that, it is accurate to control the making phase of the applied voltage, whether the closing is demanded at voltage peak or zero.
文摘动脉粥样硬化是心血管疾病重要的病理生理基础,延缓和防治动脉粥样硬化对于减少和降低心血管疾病的发病率及病死率具有重要意义。高密度脂蛋白(high density lipoprotein,HDL)通过参与介导胆固醇逆向转运(reverse cholesterol transport,RCT)在抗动脉粥样硬化的形成和进展中发挥了重要作用。Preβ-1高密度脂蛋白(prebeta-1 high density lipoprotein,Preβ-1HDL)作为HDL的一种亚类,是外周细胞移出胆固醇的最初接受体,直接参与了RCT的起始步骤,并在随后的胆固醇酯化及转运中起着重要作用。本文就Preβ-1HDL的结构、代谢及其与心血管疾病的关系作一简要综述。
基金Ministry of Higher Education of Malaysia for funding the project on PEC NDT at IIUM through the research grant FRGS16-059-0558supported by the National Natural Science Foundation of China under research grants 51677187 and 51307172
文摘Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.
基金Project supported by the National Natural Science Foundation of of China (Grant No. 60672041)
文摘To determine whether a given deterministic nonlinear dynamic system is chaotic or periodic, a novel test approach named zero-one （0-1） test has been proposed recently. In this approach, the regular and chaotic motions can be decided by calculating the parameter K approaching asymptotically to zero or one. In this study, we focus on the 0-1 test algorithm and illustrate the selection of parameters of this algorithm by numerical experiments. To validate the reliability and the universality of this algorithm, it is applied to typical nonlinear dynamic systems, including fractional-order dynamic system.
基金Supported by National Key Technology Support Program of China(Grant No.2011BAF11B03)National Science and Technology Major Projects of China(Grant No.2012ZX04010-011)
文摘The current research of machine center accuracy in workspace mainly focuses on the poor geometric error subjected to thermal and gravity load while in operation, however, there are little researches focusing on the effect of machine center elastic deformations on workspace volume. Therefore, a method called pre-deformation for assembly performance is presented. This method is technically based on the characteristics of machine tool assembly and collaborative computer-aided engineering （CAE） analysis. The research goal is to enhance assembly performance, including straightness, positioning, and angular errors, to realize the precision of the machine tool design. A vertical machine center is taken as an example to illustrate the proposed method. The concept of travel error is defined to obtain the law of the guide surface. The machine center assembly performance is analyzed under cold condition and thermal balance condition to establish the function of pre-deformation. Then, the guide surface in normal direction is processed with the pre-deformation function, and the machine tool assembly performance is measured using a laser interferometer. The measuring results show that the straightness deviation of the Z component in the Y-direction is 158.9% of the allowable value primarily because of the gravity of the spindle head, and the straightness of the X and Y components is minimal. When the machine tool is processed in pre-deformation, the straightness of the Z axis moving component is reduced to 91.2%. This research proposes a pre-deformation machine center assembly method which has sufficient capacity to improving assembly accuracy of machine centers.
文摘A combined experimental and computational study was carried out to investigate ballistic performance of laterally preload compressed SiC tile against long rod impact. A 100 x 100 by 20 mm thick SiC tile was pushed into a 5 mm thick steel frame at high temperature of 430 ℃ so that after cool down to room temperature, the lateral preload compressive stress was developed in the SiC tiles. Depth of penetration tests of the SiC tiles with and without pre-stress were performed, where tungsten alloy long rods at a nominal velocity of 1240 m/s were launched to hit the SiC tiles backed by the steel blocks. Compared with the SiC tiles without any pre-stress, the pre-compressed SiC tiles were found to reduce significantly the residual penetration in the backing block. Simulations were carried out using the LS-dyna hydrocode,taking account of preload stress. The simulations showed that the lateral preload compression strengthened the intact SiC tiles and dwell occurred in the early penetration stage, eroding the striking long rod efficiently.
文摘Objective:To elucidate the awareness and approach to pre-operative human immunodeficiency virus(HIV) testing and emphasis on the attendant components of HIV testing.Methods: The study was conducted at the theatres of the University of Port Harcourt Teaching Hospital among 123 nursing,anaesthetic,and operating staff.A descriptive cross sectional design was adopted with stratified sampling.The study instrument was a structured,self administered pro forma.Results:All respondents were all aware of HIV infection and all had transmission through infected blood and tissues(100.0%).88.6%had infection through needle stick injuries, 62.6%through vertical transmission,and 98.4%through blood transfusion.Sixty three percent of respondents correctly knew what preoperative testing was,while 58.5%were aware of the preoperative testing policy of the hospital.All respondents favoured the policy of preoperative testing.Attitudinal values to seropositive patients were not very different as 72.4%of respondents claimed they treated every patient as high risk,and all respondents used personal protective equipment.Conclusions:Routine HIV testing now represents a conventional means providing patients with knowledge of their HIV status.Such testing should be accompanied by informed consent,counselling,confidentiality,protection,and access to treatment.
