Enhancing the precision of phase estimation by weak measurement and quantum measurement reversal

The enhancement of the precision of phase estimation in quantum metrology is investigated by employing weak measurement （WM） and quantum measurement reversal （QMR）. We derive the exact expressions of the optimal quantum Fisher information （QFI） and success probability of phase estimation for an exactly solving model consisting of a qubit interacting with a structured reservoir. We show that the QFI can be obviously enhanced by means of the WM and QMR in different regimes. In addition, we also show that the magnitude of the decoherence involved in the WM and QMR can be a general complex number, which extends the applicable scope of the WM and QMR approach.

A GREEDY ALGORITHM FOR SPARSE PRECISION MATRIX APPROXIMATION

Precision matrix estimation is an important problem in statistical data analysis.This paper proposes a sparse precision matrix estimation approach,based on CLIME estimator and an efficient algorithm GISSP that was originally proposed for li sparse signal recovery in compressed sensing.The asymptotic convergence rate for sparse precision matrix estimation is analyzed with respect to the new stopping criteria of the proposed GISSP algorithm.Finally,numerical comparison of GISSP with other sparse recovery algorithms,such as ADMM and HTP in three settings of precision matrix estimation is provided and the numerical results show the advantages of the proposed algorithm.

A new via chain design method considering confidence level and estimation precision

For accurate prediction of via yield, via chains are usually fabricated on test chips to investigate issues about vias. To minimize the randomness of experiments and make the testing results more convincing, the confidence level and estimation precision of the via failure rate are investigated in this paper. Based on the Poisson yield model, the method of determining an adequate number of total vias is obtained using the law of large numbers and the de Moivre-Laplace theorem. Moreover, for a specific confidence level and estimation precision, the method of determining a suitable via chain length is proposed. For area minimization, an optimal combination of total vias and via chain length is further determined. Monte Carlo simulation results show that the method is in good accordance with theoretical analyses. Results of via failure rates measured on test chips also reveal that via chains designed using the proposed method has a better performance. In addition, the proposed methodology can be extended to investigate statistical significance for other failure modes.

Novel serpentine structure design method considering confidence level and estimation precision

Due to the importance of metal layers in the product yield,serpentine test structures are usually fabricated on test chips to extract parameters for yield prediction.In this paper,the confidence level and estimation precision of the average defect density on metal layers are investigated to minimize the randomness of experimental results and make the measured parameters more convincing.On the basis of the Poisson yield model,the method to determine the total area of all serpentine test structures is obtained using the law of large numbers and the Lindeberg-Levy theorem.Furthermore,the method to determine an adequate area of each serpentine test structure is proposed under a specific requirement of confidence level and estimation precision.The results of Monte Carlo simulation show that the proposed method is consistent with theoretical analyses.It is also revealed by wafer experimental results that the method of designing serpentine test structure proposed in this paper has better performance.

GSTAR:an innovative software platform for processing space geodetic data at the observation level

To meet the demands for the data combination with multiple space geodetic techniques at the observation level,we developed a new software platform with high extensibility and computation efficiency,named space Geodetic SpatioTemporal data Analysis and Research software(GSTAR).Most of the modules in the GSTAR are coded in C++with object-oriented programming.The layered modular theory is adopted for the design of the software,and the antenna-based data architecture is proposed for users to construct personalized geodetic application scenarios easily.The initial performance of the GSTAR software is evaluated by processing the Global Navigation Satellite System(GNSS)data collected from 315 globally distributed stations over two and a half years.The accuracy of GNSS-based geodetic products is evaluated by comparing them with those released by International GNSS Service(IGS)Analysis Centers(AC).Taking the products released by European Space Agency(ESA)as reference,the Three-Dimension(3D)Root-Mean-Squares(RMS)of the orbit differences are 2.7/6.7/3.3/7.7/21.0 cm and the STandard Deviations(STD)of the clock differences are 19/48/16/32/25 ps for Global Positioning System(GPS),GLObal NAvigation Satellite System(GLONASS),Galileo navigation satellite system(Galileo),BeiDou Navigation Satellite System(BDS),Medium Earth Orbit(MEO),and BDS Inclined Geo-Synchronous Orbit(IGSO)satellites,respectively.The mean values of the X and Y components of the polar coordinate and the Length of Day(LOD)with respect to the International Earth Rotation and Reference Systems Service(IERS)14 C04 products are-17.6 microarc-second(μas),9.2μas,and 14.0μs/d.Compared to the IGS daily solution,the RMSs of the site position differences in the north/east/up direction are 1.6/1.5/3.9,3.8/2.4/7.6,2.5/2.4/7.9 and 2.7/2.3/7.4 mm for GPS-only,GLONASS-only,Galileo-only,and BDS-only solution,respectively.The RMSs of the differences of the tropospheric Zenith Path Delay(ZPD),the north gradients,and the east gradients are 5.8,0.9,and 0.9 mm with respect to the IGS products.The X and Y components of the geocenter motion estimated from GPS-only,Galileo-only,and BDS-only observations well agree with IGS products,while the Z component values are much nosier where anomalous harmonics in GNSS draconitic year can be found.The accuracies of the above products calculated by the GSTAR are comparable with those from different IGS ACs.Compared to the precise scientific orbit products,the 3D RMS of the orbit differences for the two Gravity Recovery and Climate Experiment Follow-on(GRACE-FO)satellites is below 1.5 cm by conducting Precise Point Positioning with Ambiguity Resolution(PPP-AR).In addition,a series of rapid data processing algorithms are developed,and the operation speed of the GSTAR software is 5.6 times faster than that of the Positioning and Navigation Data Analyst(PANDA)software for the quad-system precise orbit determination procedure.

Unified Analysis and Output Estimation for a Strong Coupling Contactless Slipring System

A contactless slipring (CS) system utilizing inductive-power-transfer (IPT) technology is a good candidate for traditional mechanical slipring assemblies. However, suffering from the high harmonic currents in strong coupling CS systems, the output power will deviate from the theoretical values estimated by the fundamental harmonic approximation (FHA) and its extension method, i.e., E-FHA, in which the power is transferred by both the fundamental current and the high order harmonic currents. In order to achieve high precise output estimation, a unified analysis is proposed in this paper. First, “Fundamental-harmonic Double Resonance Phenomenon” is revealed via impedance analysis, to address the nature of the high harmonic currents in strong coupling systems. Then, a unified output current expression owning high precision is derived, and followed by a unified fundamental load impedance. Discussions show that both the output and the fundamental load impedance of FHA, and E-FHA are the special cases of the unified expressions proposed. FHA and E-FHA are precise enough for the loose coupling system, whereas the proposed method is indispensable for the strong coupling system with k>0.4 . Finally, simulations and experimental measurements of a 1.6kW CS system, as well as the comparative studies related to FHA, E-FHA, and the proposed method, are presented, indicating that the proposed method is effective for high precise output estimation.

Multi-GNSS products and services at iGMAS Wuhan Innovation Application Center:strategy and evaluation

Over the past years the International Global Navigation Satellite System(GNSS)Monitoring and Assessment System(iGMAS)Wuhan Innovation Application Center(IAC)dedicated to exploring the potential of multi-GNSS signals and providing a set of products and services.This contribution summarizes the strategies,achievements,and innovations of multi-GNSS orbit/clock/bias determination in iGMAS Wuhan IAC.Both the precise products and Real-Time Services(RTS)are evaluated and discussed.The precise orbit and clock products have comparable accuracy with the precise products of the International GNSS Service(IGS)and iGMAS.The multi-frequency code and phase bias products for Global Positioning System(GPS),BeiDou Navigation Satellite System(BDS),Galileo navigation satellite system(Galileo),and GLObal NAvigation Satellite System(GLONASS)are provided to support multi-GNSS and multi-frequency Precise Point Positioning(PPP)Ambiguity Resolution(AR).Compared with dual-frequency PPP AR,the time to first fix of triple-frequency solution is improved by 30%.For RTS,the proposed orbit prediction strategy improves the three dimensional accuracy of predicted orbit by 1 cm.The multi-thread strategy and high-performance matrix library are employed to accelerate the real-time orbit and clock determination.The results with respect to the IGS precise products show the high accuracy of RTS orbits and clocks,4–9 cm and 0.1–0.2 ns,respectively.Using real-time satellite corrections,real-time PPP solutions achieve satisfactory performance with horizontal and vertical positioning errors within 2 and 4 cm,respectively,and convergence time of 16.97 min.

A square root information filter for multi-GNSS real-time precise clock estimation

Real-time satellite orbit and clock estimations are the prerequisite for Global Navigation Satellite System(GNSS)real-time precise positioning services.To meet the high-rate update requirement of satellite clock corrections,the computational efficiency is a key factor and a challenge due to the rapid development of multi-GNSS constellations.The Square Root Information Filter(SRIF)is widely used in real-time GNSS data processing thanks to its high numerical stability and computational efficiency.In real-time clock estimation,the outlier detection and elimination are critical to guarantee the precision and stability of the product but could be time-consuming.In this study,we developed a new quality control procedure including the three standard steps:i.e.,detection,identification,and adaption,for real-time data processing of huge GNSS networks.Effort is made to improve the computational efficiency by optimizing the algorithm to provide only the essential information required in the processing,so that it can be applied in real-time and high-rate estimation of satellite clocks.The processing procedure is implemented in the PANDA(Positioning and Navigation Data Analyst)software package and evaluated in the operational generation of real-time GNSS orbit and clock products.We demonstrated that the new algorithm can efficiently eliminate outliers,and a clock precision of 0.06 ns,0.24 ns,0.06 ns,and 0.11 ns can be achieved for the GPS,GLONASS,Galileo,and BDS-2 IGSO/MEO satellites,respectively.The computation time per epoch is about 2 to 3 s depending on the number of existing outliers.Overall,the algorithm can satisfy the IGS real-time clock estimation in terms of both the computational efficiency and product quality.

Phase Residual Estimations for PCVs of Spaceborne GPS Receiver Antenna and Their Impacts on Precise Orbit Determination of GRACE Satellites

In-flight phase center systematic errors of global positioning system（GPS） receiver antenna are the main restriction for improving the precision of precise orbit determination using dual-frequency GPS.Residual approach is one of the valid methods for in-flight calibration of GPS receiver antenna phase center variations（PCVs） from ground calibration.In this paper,followed by the correction model of spaceborne GPS receiver antenna phase center,ionosphere-free PCVs can be directly estimated by ionosphere-free carrier phase post-fit residuals of reduced dynamic orbit determination.By the data processing of gravity recovery and climate experiment（GRACE） satellites,the following conclusions are drawn.Firstly,the distributions of ionosphere-free carrier phase post-fit residuals from different periods have the similar systematic characteristics.Secondly,simulations show that the influence of phase residual estimations for ionosphere-free PCVs on orbit determination can reach the centimeter level.Finally,it is shown by in-flight data processing that phase residual estimations of current period could not only be used for the calibration for GPS receiver antenna phase center of foretime and current period,but also be used for the forecast of ionosphere-free PCVs in future period,and the accuracy of orbit determination can be well improved.