Assessing Suitability of Rural Settlements Using an Improved Technique for Order Preference by Similarity to Ideal Solution

Land suitability assessment is a prerequisite phase in land use planning; it guides toward optimal land use by providing information on the opportunities and constraints involved in the use of a given land area. A geographic information system-based procedure, known as rural settlement suitability evaluation(RSSE) using an improved technique for order preference by similarity to ideal solution(TOPSIS), was adopted to determine the most suitable area for constructing rural settlements in different geographical locations. Given the distribution and independence of rural settlements, a distinctive evaluation criteria system that differed from that of urban suitability was established by considering the level of rural infrastructure services as well as living and working conditions. The unpredictable mutual interference among evaluation factors has been found in practical works. An improved TOPSIS using Mahalanobis distance was applied to solve the unpredictable correlation among the criteria in a suitability evaluation. Uncertainty and sensitivity analyses obtained via Monte Carlo simulation were performed to examine the robustness of the model. Daye, a resource-based city with rapid economic development, unsatisfied rural development, and geological environmental problems caused by mining, was used as a case study. Results indicate the following findings: 1) The RSSE model using the improved TOPSIS can assess the suitability of rural settlements, and the suitability maps generated using the improved TOPSIS have higher information density than those generated using traditional TOPSIS. The robustness of the model is improved, and the uncertainty is reduced in the suitability results. 2) Highly suitable land is mainly distributed in the northeast of the study area, and the majority of which is cultivated land, thereby leading to tremendous pressure on the loss of cultivated land. 3) Lastly, 12.54% of the constructive expansion permitted zone and 8.36% of the constructive expansion conditionally permitted zone are situated in an unsuitable area, which indicates that the general planning of Daye lacks the necessary verification of suitability evaluation. Guidance is provided on the development strategy of rural settlement patches to support decision making in general land use planning.

An Evaluation of the Critical Success Factors in Sustainable Food Supply Chains in Developing Countries

Food is one of the biggest industries in developed and underdeveloped countries. Supply chain sustainability is essential in established and emerging economies because of the rising acceptance of cost-based outsourcing and the growing technological, social, and environmental concerns. The food business faces serious sustainability and growth challenges in developing countries. A comprehensive analysis of the critical success factors (CSFs) influencing the performance outcome and the sustainable supply chain management (SSCM) process. A theoretical framework is established to explain how they are used to examine the organizational aspect of the food supply chain life cycle analysis. This study examined the CSFs and revealed the relationships between them using a methodology that included a review of literature, interpretative structural modeling (ISM), and cross-impact matrix multiplication applied in classification (MICMAC) tool analysis of soil liquefaction factors. The findings of this research demonstrate that the quality and safety of food are important factors and have a direct effect on other factors. To make sustainable food supply chain management more adequate, legislators, managers, and experts need to pay attention to this factor. In this work. It also shows that companies aiming to create a sustainable business model must make sustainability a fundamental tenet of their organization. Practitioners and managers may devise effective long-term plans for establishing a sustainable food supply chain utilizing the recommended methodology.

面向自愈的智能配电网免疫力评估方法

自愈是智能配电网区别于传统配电网的显著特征,为提高各项自愈技术实用化水平,需要准确掌握智能配电网整体免疫力水平。因此,借鉴人体免疫系统机理,提出了智能配电网免疫系统,包括免疫耐受、免疫自稳、免疫识别、免疫应答和免疫恢复5类功能,在此基础上,提出了基于改进层次分析法与逼近理想解距离法相结合的智能配电网免疫力评估模型构建方法,并构建了智能配电网免疫力评估指标体系以及智能配电网免疫力评估模型。此评估模型能够全面且多层次地考虑影响智能配电网免疫力强弱的各类因素,在实际应用中为智能配电网精细化运维检修和管理提供理论参考。

基于模糊群决策的绿色供应商选择和订单分配方法

随着市场竞争愈发激烈、全球环境日益恶化以及公众环保意识的提高,绿色采购问题受到了广泛关注。现有研究绝大多数聚焦于考虑绿色准则的供应商选择问题,以实现可持续经营。然而,在综合考虑时间、价格和成本等因素的前提下,从适应性强的供应商处获得适当的产品,对于企业来说更为可行和经济,即供应商选择和订单分配。为了解决上述关键问题,提出了一种模糊环境下的多准则群体决策方法。提出了一种基于理想解相似性偏好排序和层次分析法(technique for order of preference by similarity to ideal solution and analytic hierarchy process,TOPSIS-AHP)的模糊排序方法,该方法可根据企业战略灵活调整传统准则和绿色准则的权重。在双目标优化模型中引入供应商排名进行订货,在实现采购绩效最大化的同时,最大限度地降低采购成本。结果表明:所提方法能够有效评价供应商绩效,并优化候选供应商之间的订单分配。

Selecting suitable key supplier for core components during smart complex equipment central-private enterprises collaborative development process:from two different forms of evaluation information and matching perspective

With the development of central-private enterprises integration,selecting suitable key suppliers are able to provide core components for smart complex equipment.We consider selecting suitable key suppliers from matching perspective,for it not only satisfies natural development of smart complex equipment,it is also a good implementation of equipment project in central-private enterprises integration context.In in this paper,we carry out two parts of research,one is evaluation attributes based on comprehensive analysis,and the other is matching process between key suppliers and core components based on the matching attribute.In practical analysis process,we employ comprehensive evaluated analysis methods to acquire relevant attributes for the matching process that follows.In the analysis process,we adopt entropy-maximum deviation method(MDM)-decision-making trial and evaluation laboratory(DEMATEL)-technique for order preference by similarity to an ideal solution(TOPSIS)to obtain a comprehensive analysis.The entropy-MDM is applied to get weight value,DEMATEL is utilized to obtain internal relations,and TOPSIS is adopted to get ideal evaluated solution.We consider aggregating two types of evaluation information according to similarities of smart complex equipment based on the combination between geometric mean and arithmetic mean.Moreover,based on the aforementioned attributes and generalized power Heronian mean operator,we aggregate preference information to acquire relevant satisfaction degree,then combine the constructed matching model to get suitable key supplier.Through comprehensive analysis of selecting suitable suppliers,we know that two-sided matching and information aggregation can provide more research perspectives for smart complex equipment.Through analysis for relevant factors,we find that leading role and service level are also significant for the smart complex equipment development process.

Two-Sided Matching Decision Making with Multi-Attribute Probabilistic Hesitant Fuzzy Sets

In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality.Probability hesitant fuzzy sets,however,have grown in popularity due to their advantages in communicating complex information.Therefore,this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information.The agent attribute weight vector should be obtained by using the maximum deviation method and Hamming distance.The probabilistic hesitancy fuzzy information matrix of each agent is then arranged to determine the comprehensive evaluation of two matching agent sets.The agent satisfaction degree is calculated using the technique for order preference by similarity to ideal solution(TOPSIS).Additionally,the multi-object programming technique is used to establish a TSM method with the objective of maximizing the agent satisfaction of two-sided agents,and the matching schemes are then established by solving the built model.The study concludes by providing a real-world supply-demand scenario to illustrate the effectiveness of the proposed method.The proposed method is more flexible than prior research since it expresses evaluation information using probability hesitating fuzzy sets and can be used in scenarios when attribute weight information is unclear.

基于眼动及生理指标的航空公司官网界面评价

分析影响航空界面设计优劣的因素,并为航空官网界面设计改进提供依据。以8个国内外航空公司官网首页作为研究样本,通过眼动追踪和生理实验得到客观数据,选取评价指标,采用CRITIC-TOPSIS法计算样本评价值。用户对界面关注程度的主要影响因素包括面积大小、颜色、亮度、饱和度等。眼动追踪和生理技术相结合的方法能有效评价航空界面设计优劣,提出具有针对性的改进意见,有效用于航空界面设计优化。

数字贸易发展水平测度及影响因素分析——以浙江省为例

随着数字经济的快速发展,数字贸易已成为影响经济发展的重要力量。在数字经济背景下探讨数字贸易内涵,从信息网络基础设施、数字技术水平、产业数字化贸易、数字产业化贸易和贸易潜力5个维度构建数字贸易发展评价指标体系,运用相对熵的TOPSIS(technique for order preference by similarity to an ideal solution)法对浙江省2010—2018年数字贸易发展水平进行测度。结果表明:2010-2018年浙江省数字贸易发展总体呈上升趋势;进一步基于TOE(technology-organization-environment,技术-组织-环境)框架和灰色关联度模型探讨了数字贸易发展水平的影响因素。实证研究发现:信息化水平、产业结构、政府支持力度、经济发展水平、对外贸易开放水平均能促进浙江省数字贸易发展,其中信息化水平影响最为显著,而对外贸易开放水平的影响最小。

我国三级公立医院绩效考核指标评分方法分析

基于某市三级公立医院绩效考核实践,指出用加权逼近理想解排序法及全国三级公立医院绩效考核评分办法参考说明中推荐的评分方法进行考核存在的问题与不足,并提出改进和优化评分方法的思路,为构建更加科学公正的绩效考核体系提供新的思路和方法。

Ranking approach of cross-efficiency based on improved TOPSIS technique

The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis （DEA） extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit （DMU） with the best practice and to rank the DMUs by their respective cross-efficiency scores. The main drawbacks of the cross-efficiency evaluation method when the ultimate average cross-efficiency scores are used to evalu- ate and rank the DMUs are also pointed out. With the research gap, an improved technique for order preference by similarity to ideal solution （TOPSIS） is introduced to rank the crossfficiency by eliminating the average assumption. Finally, an empirical example is illustrated to examine the validity of the proposed method.

Combining TOPSIS and GRA for supplier selection problem with interval numbers

Supplier selection can be regarded as a typical multiple attribute decision-making problem. In real-world situation, the values of the alternative attributes and their weights are always being nondeterministic, and as a result of this, the values are considered interval numbers. In addition, the common approach to measure the similarity between alternatives through their distance suffers from some minor shortcomings. To address these problems, this study develops a novel hybrid decision-making method by combining the technique for order preference by similarity to an ideal solution （TOPSIS） with grey relational analysis （GRA） for supplier selection with interval numbers. By introducing the intervals theory, the extensions of Euclidean distance and grey relational grade are defined. And then a new comprehensive closeness coefficient is constituted for supplier alternatives evaluation based on the interval Euclidean distance and the interval grey relational grade, which could indicate the distance-based similarity and the shape-based similarity simultaneously. A mtmerical example is taken to validate the flexibility of the proposed method, and result shows that this method can tackle the uncertainty in real-world supplier selection and also help decision makers to effectively select optimal suppliers.

Residents'Satisfaction with Public Services in Mountainous Areas:An Empirical Study of Southwestern Sichuan Province,China

Abstract： Enhancing the efficiency of public services is essential to residents in mountainous areas. It is also important to promote sus- tainable development of these regions. Analysing residents＇ satisfaction with public services in mountainous areas can help in evaluating outcomes of fiscal investment and identifying potential coping approaches for improving public service efficiencies. The residents＇ satisfaction with public services and the factors that influence such satisfaction were examined in this study. A study of 12 towns located in the southwestern Sichuan Province was performed using an entropy-weighted analytic hierarchy process （EWAHP）, the technique for order preference by similarity to ideal solution （TOPSIS） and Tobit regression methods. The results indicate that： 1） the spatial distribu- tion of satisfaction with public services is non-uniform, and the spatial distribution structure varies for different types of public services. 2） Residents＇ satisfaction with public services is influenced by both objective and subjective factors. Population density, economic dis- tance, social and cultural divisions and elevation are the major objective factors, whereas bounded rationality, the hierarchy of needs and service expectations are the main subjective factors. The most effective strategies for enhancing residents＇ satisfaction with public ser- vices are likely to be clustering the population, choosing supply centres with different public services, regulating the cultural division in ethnic minority towns, selecting supply priorities in accordance with residents＇ needs, implementing targeted intervention policies and establishing ＇bottom-up＇ and ＇top-down＇ integrated decision-making mechanisms. Keywords： mountainous areas; public services; residents＇ satisfaction; entropy-weighted analytic hierarchy process （EWAHP）; technique for order preference by similarity to ideal solution （TOPSIS）; Tobit regression; southwestern Sichuan Province

Weakness Ranking Method for Subsystems of Heavy-Duty Machine Tools Based on FMECA Information

Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.

Target-tracked prioritization to surveille ballistic missiles

The missile-tracked priority assessment for the early warning system monitoring multi-missile very well, is the first task to defend them and useful to perform optimally the sensor-to-missile assignment. The problem of the missile-tracked priority assessment is of incomplete information, of multi-attribute and dynamic. To solve the dificult problem, the index system, which includes six classification indices, is established by means of reducing the target＇s primary information which the early warning system focuses on. The lack of some attributes values, which is caused by the incomplete information, is handled by the approach： first classifying each attribute as unknown one or known one, and then subdividing the latter, last using the expectation and the information entropy if the attribute is known but uncertain. With a view of reality, nine qualitative evaluation criteria are given. Based on them each index is quantified by the eigenvector method. And then based on the improved technique for order preference by similarity to ideal solution （TOPSIS）, the targets-tracked priorities are assessed and sorted by an evaluation function from three aspects： 1） the quantity of the available information, 2） the affirmative or accurate degree of the available information, 3） the classification or trait of the available information.

Research on Network Maintenance Strategy Selection Based on Analytic Hierarchy Process and Technique for Order Preference by Similarity to Ideal Solution Algorithm

Network maintenance strategy selection is a multi-objective decision making topic. It mostly depends on the uncertainty and fuzziness of decision makers and conditions. In this paper, based on analytic hierarchy process(AHP) and technique for order preference by similarity to ideal solution(TOPSIS), TOPSIS partial order method is proposed to choose the optimal maintenance strategy. This method uses AHP to determine the weights of evaluation indexes. The optimal maintenance strategy choice is given as an example to demonstrate the effectiveness of the method.

Evaluation of Plant Landscape in Residential Areas Based on AHP and TOPSIS

Taking 6 residential areas in Nyingchi of Tibet as research objects,from aesthetic effect,ecological function and leisure service,this paper established the evaluation indicator system for plant landscape in residential areas using AHP,and calculated the weight of indicators using the judgment matrix. Besides,it calculated the ideal solution and closeness degree of matrix using TOPSIS,and established the evaluation method and preference method for plant landscape in residential areas. The results show that the indicators of seasonal variation,environmental benefit and per capita green space mattered most in the landscape evaluation of residential areas. The richness of flowering plant is weak in the landscape evaluation. From the comprehensive evaluation of residential areas,Nyingchi Garden District and Xingfu District have excellent plant landscape,Jialong Garden District and Shangcheng Garden District have general plant landscape,and Sun City District and Niyang Garden District have poor plant landscape.

Evaluation of global navigation satellite system spoofing efficacy

The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation of spoofing capability.However,current evaluation systems face challenges arising from the irrationality of previous weighting methods,inapplicability of the conventional multi-attribute decision-making method and uncertainty existing in evaluation.To solve these difficulties,considering the validity of the obtained results,an evaluation method based on the game aggregated weight model and a joint approach involving the grey relational analysis and technique for order preference by similarity to an ideal solution(GRA-TOPSIS)are firstly proposed to determine the optimal scheme.Static and dynamic evaluation results under different schemes are then obtained via a fuzzy comprehensive assessment and an improved dynamic game method,to prioritize the deceptive efficacy of the equipment accurately and make pointed improvement for its core performance.The use of judging indicators,including Spearman rank correlation coefficient and so on,combined with obtained evaluation results,demonstrates the superiority of the proposed method and the optimal scheme by the horizontal comparison of different methods and vertical comparison of evaluation results.Finally,the results of field measurements and simulation tests show that the proposed method can better overcome the difficulties of existing methods and realize the effective evaluation.

Optimal design of functionally graded Pm PV/CNT nanocomposite cylindrical tube for purpose of torque transmission

Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanocomposite, is optimally designed for the purpose of torque transmission. The main confining parameters of a rotating shaft in torque transmission process are mass of the shaft, critical speed of rotation and critical buckling torque. It is required to solve a multi-objective optimization problem(MOP) to consider these three targets simultaneously in the process of design. The three-objective optimization problem for this case is defined and solved using a hybrid method of FEM and modified non-dominated sorting genetic algorithm(NSGA-II), by coupling two softwares, MATLAB and ABAQUS. Optimization process provides a set of non-dominated optimal design vectors. Then, two methods, nearest to ideal point(NIP) and technique for ordering preferences by similarity to ideal solution(TOPSIS), are employed to choose trade-off optimum design vectors. Optimum parameters that are obtained from this work are compared with the results of previous studies for similar cylindrical tubes made from composite or a hybrid of aluminum and composite that more than 20% improvement is observed in all of the objective functions.

Optimizing Rank of Landscape Planning Works of Urban Wetland Park

Classifying and ranking the huge amounts of landscape planning works of urban wetland park is always difficult due to the multi-functions （ecological, leisure, educational and disaster prevention） of the urban wetland park. Therefore, an optimizing rank system is urgently needed. Analytic Hierarchy Process （AHP） and Technique for Order Preference by Similarity to Ideal Solution （TOPSIS） models were used to rank the planning works of 30 urban wetland park based on four mainly factors, which included landscape ecological planning, landscape planning, ecological planning and economic planning. The study indicated that the AHP- TOPSIS model had good discrimination in the classification and ranking of landscape planning works of urban wetland park and it was also applicable to the planning works of other urban greenbelts.

Best compromising crashworthiness design of automotive S-rail using TOPSIS and modified NSGAⅡ

In order to reduce both the weight of vehicles and the damage of occupants in a crash event simultaneously, it is necessary to perform a multi-objective optimal design of the automotive energy absorbing components. Modified non-dominated sorting genetic algorithm II(NSGA II) was used for multi-objective optimization of automotive S-rail considering absorbed energy(E), peak crushing force(Fmax) and mass of the structure(W) as three conflicting objective functions. In the multi-objective optimization problem(MOP), E and Fmax are defined by polynomial models extracted using the software GEvo M based on train and test data obtained from numerical simulation of quasi-static crushing of the S-rail using ABAQUS. Finally, the nearest to ideal point(NIP)method and technique for ordering preferences by similarity to ideal solution(TOPSIS) method are used to find the some trade-off optimum design points from all non-dominated optimum design points represented by the Pareto fronts. Results represent that the optimum design point obtained from TOPSIS method exhibits better trade-off in comparison with that of optimum design point obtained from NIP method.