STUDY ON AUTOMATIC POLISHING AT CONSTANT PRESSURE INTENSITY

Through theoretical and experimental researeh about automatic polishing on thecurved surfaces of the moulds, the limitation of the polishing method at constant pressure, whichis adopted widely in the world, is analysed. Based on the analysis, a new polishing method atconstant pressure intensity is proposed, and the corresponding goveming equation and a com-prehensive polishing parameter are given as well.

Pressure Dependence of the Small-Signal Gain and Saturation Intensity of a Copper Bromide Laser

A pair of copper bromide lasers in an oscillator–amplifier configuration is used to investigate the small signal gain and saturation intensity as amplifying parameters and output power of lasers, versus pressure of buffer gas. It is shown that the amplifying parameters and laser output power have a maximum value at optimum buffer gas pressure of 11？Torr. The challenge between microscopic parameters such as stimulated emission cross section, laser upper level lifetime, and population inversion, which determine the values of laser characteristics respective to the operational pressure of buffer gas, are investigated. Thus an optimum delay time of about 10？ns is determined, and a maximum output power equivalent to about 12？W is extracted. The amplifying parameters and measured output power of laser versus delay times show some local maxima and minima at the delay time interval of 6–43？ns.

Theoretical and numerical studies of crack initiation and propagation in rock masses under freezing pressure and far-field stress

Water-bearing rocks exposed to freezing temperature can be subjected to freezeethaw cycles leading tocrack initiation and propagation, which are the main causes of frost damage to rocks. Based on theGriffith theory of brittle fracture mechanics, the crack initiation criterion, propagation direction, andcrack length under freezing pressure and far-field stress are analyzed. Furthermore, a calculation methodis proposed for the stress intensity factor （SIF） of the crack tip under non-uniformly distributed freezingpressure. The formulae for the crack/fracture propagation direction and length of the wing crack underfreezing pressure are obtained, and the mechanism for coalescence of adjacent cracks is investigated.In addition, the necessary conditions for different coalescence modes of cracks are studied. Using thetopology theory, a new algorithm for frost crack propagation is proposed, which has the capability todefine the crack growth path and identify and update the cracked elements. A model that incorporatesmultiple cracks is built by ANSYS and then imported into FLAC3D. The SIFs are then calculated using aFISH procedure, and the growth path of the freezing cracks after several calculation steps is demonstratedusing the new algorithm. The proposed method can be applied to rocks containing fillings such asdetritus and slurry. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Pressure fluctuation characteristics in the pressurization unit of a multiphase pump

The tip clearance induces the tip leakage vortex(TLV),which has a great impact on the pressure fluctuation characteristics of the multiphase pump.To investigate the effect of the tip clearance on the pressure fluctuations,based on the Reynolds time-averaged Navier-Stokes equation and the shear stress transfer(SST)k-ωturbulence model,the three-dimensional turbulent flow in the pump is numerically simulated for different tip clearances in the water and gas-liquid two-phase cases by using the ANSYS CFX software and the results are verified with experimental data.It is shown the greater pressure fluctuation intensity corresponds with the TLV both in the water and gas-liquid two-phase cases.In the meantime,the location of the maximum pressure fluctuation intensity is related to the tip clearance size.In addition,for different tip clearances,the pressure fluctuation intensity with the rotor and stator interaction(RSI)is relatively larger.The difference is that when R_(tc)=1.5 mm,the pressure fluctuation intensity near the impeller middle point is also relatively larger.On the whole,the pressure fluctuation intensity in the gas-liquid two-phase case is larger than that in the water case.Furthermore,the gas causes the frequency of the high-amplitude pressure fluctuation in the impeller and the diffuser to be shifted from 7 f_(n)(f_(n) denotes impeller rotational frequency)and 3 f_(n) to the low-frequency region,respectively.The pressure fluctuations at the blade-passing frequency(BPF)and the multiple BPFs gradually disappear.Meanwhile,the amplitude at the dominant frequency in the gas-liquid two-phase case is at least one order of magnitude smaller than that in the water case,and the peak-to-peak value of the pressure fluctuation is also much smaller.

An executive review of sludge pretreatment by sonication

Ultrasonication（US）, which creates hydro-mechanical shear forces in cavitation, is an advanced technology in sludge pretreatment. However, there are many factors affecting the efficacy of cavitation and ultrasonication disintegration of sludge as a consequence.The objective of this work is to present an extensive review of evaluation approaches of sludge US pretreatment efficiency. Besides, optimization methodologies of related parameters,the differences of optimum values and the similarities of affecting trends on cavitation and sludge pretreatment efficiency were specifically pointed out, including ambient conditions,ultrasonic properties, and sludge characteristics. The research is a prerequisite for optimization of sludge US pretreatment efficiency in lab-scale and practical application. There is not-yet a comprehensive method to evaluate the efficiency of sludge US pretreatment, but some main parameters commonly used for this purpose are degree of sludge disintegration, proteins,particle size reduction, etc. Regarding US parameters, power input PUS, intensity IUS, and frequency FSseem to have significant effects. However, the magnitude of the effect of PUSand probe size in terms of IUShas not been clearly detailed. Investigating very low FSseems interesting but has not yet been taken into consideration. In addition, static pressure effect has been marginally studied only and investigation on the effect of pH prior to US process has been restricted. Their effects therefore should be varied separately and simultaneously with other related parameters, i.e. process conditions, ultrasonic properties, and sludge characteristics, to optimize sludge US pretreatment process.