A calibration test was done in order to measure its sensitivity coefficient by an improved soil test device.The experimental result shows that the soil pressure min-sensor made of the monocrystalline silicon（SPMMS）i...A calibration test was done in order to measure its sensitivity coefficient by an improved soil test device.The experimental result shows that the soil pressure min-sensor made of the monocrystalline silicon（SPMMS）is proved to be good linear,high precision and less that can fetch precise data in low pressure range even near by O point,which guarantees the reliability of the soil pressure test in geotechnical engineering.展开更多
Flexible pressure sensors with high sensitivity are desired in the fields of electronic skins,human-machine interfaces,and health monitoring.Employing ionic soft materials with microstructured architectures in the fun...Flexible pressure sensors with high sensitivity are desired in the fields of electronic skins,human-machine interfaces,and health monitoring.Employing ionic soft materials with microstructured architectures in the functional layer is an effective way that can enhance the amplitude of capacitance signal due to generated electron double layer and thus improve the sensitivity of capacitive-type pressure sensors.However,the requirement of specific apparatus and the complex fabrication process to build such microstructures lead to high cost and low productivity.Here,we report a simple strategy that uses open-cell polyurethane foams with high porosity as a continuous three-dimensional network skeleton to load with ionic liquid in a one-step soak process,serving as the ionic layer in iontronic pressure sensors.The high porosity(95.4%) of PU-IL composite foam shows a pretty low Young's modulus of 3.4 kPa and good compressibility.A superhigh maximum sensitivity of 9,280 kPa^(-1) in the pressure regime and a high pressure resolution of 0.125% are observed in this foam-based pressure sensor.The device also exhibits remarkable mechanical stability over 5,000 compression-release or bending-release cycles.Such high porosity of composite structure provides a simple,cost-effective and scalable way to fabricate super sensitive pressure sensor,which has prominent capability in applications of water wave detection,underwater vibration sensing,and mechanical fault monitoring.展开更多
Piezoresistive pressure sensors based on silicon have a large thermal drift because of their high sensitivity to temperature. The study of the effect of the temperature and doping level on characteristics of these sen...Piezoresistive pressure sensors based on silicon have a large thermal drift because of their high sensitivity to temperature. The study of the effect of the temperature and doping level on characteristics of these sensors is essential to define the parameters that cause the output characteristics drift. In this study, we adopted the model of Kanda to determine the effect of the temperature and of doping level on the piezoresistivity of the Silicon monocrystal. This is to represent P(N,T) and for p-type silicon as functions of impurity concentration for different temperatures. This allows us to see the effect of temperature and doping concentration on the output characteristics of the sensor. Finally, we study the geometric influence parameters and doping on these characteristics to optimize the sensor performance. This study allows us to predict the sensor behavior against temperature and to minimize this effect by optimizing the doping concentration.展开更多
We have proposed and demonstrated experimentally a novel and simple pressure sensor based on mechanically induced long period optical fiber gratings. We report here for the first time to our knowledge the characteriza...We have proposed and demonstrated experimentally a novel and simple pressure sensor based on mechanically induced long period optical fiber gratings. We report here for the first time to our knowledge the characterization of mechanically induced long period fiber gratings in novel multimode-singlemode-multimode fiber structure. The MLPFG induced in single mode fiber and multimode fibers are studied separately and the results are compared with MLPFG induced in MSM fiber structure. MLPFG in MSM structure has much greater sensitivity. We have obtained maximum transmission loss peak of around 18 dB, and the sensitivity of pressure sensor is 8 dB/Kg.展开更多
Spiky spherical nickel powder with sharp nano-tips on its surface is a kind of excellent fillers for developing pressure-sensitive cement-based composites/sensors for traffic detection,structural health monitoring,and...Spiky spherical nickel powder with sharp nano-tips on its surface is a kind of excellent fillers for developing pressure-sensitive cement-based composites/sensors for traffic detection,structural health monitoring,and border and military security.The sharp nano-tips on the surface of spiky spherical nickel particles can induce field emission and tunneling effects,which leads to the ultrahigh pressure-sensitive responses of the cement-based composites.In this paper,we systematically introduce research on nanotip-induced ultrahigh pressure-sensitive cement-based composites/sensors,with attentions to their pressure-sensitive property and sensing mechanism,pressure-sensitive characteristic model,and smart structure system for traffic detection.展开更多
Flexible pressure sensors capable of monitoring diverse physiological signals and body movements have garnered tremendous attention in wearable electronic devices.Thereinto,high constant sensitivity over a wide pressu...Flexible pressure sensors capable of monitoring diverse physiological signals and body movements have garnered tremendous attention in wearable electronic devices.Thereinto,high constant sensitivity over a wide pressure range combined with breathability,biocompatibility,biodegradability is pivotal for manufacturing of reliable pressure sensors in practical sensing applications.In this work,inspired by the multilayered structure of skin epidermis,we propose and demonstrate a multi-attribute wearable piezoresistive pressure sensor consisting of multilayered gradient conductive poly(ε-caprolactone)nanofiber membranes composites.In response to externally applied pressure,a layer-by-layer current path is activated inside the multilayered membranes composites,leading to the most salient sensing performance of high constant sensitivity of 33.955 kPa^(−1) within the pressure range of 0–80 kPa.The proposed pressure sensor also exhibits a fast response–relaxation time,a low detection limit,excellent stability,which can be successfully used to measure human physiological signals.Lastly,an integrated sensor array system that can locate objects’positions is constructed and applied to simulate sitting posture monitoring.These results indicate that the proposed pressure sensor holds great potential in health monitoring and wearable electronic devices.展开更多
The issue of sensitivity attenuation in high-pressure region has been a persistent concern for pressure-sensitive electronic skins.In order to tackle such trade-off between sensitivity and linear range,herein,a hybrid...The issue of sensitivity attenuation in high-pressure region has been a persistent concern for pressure-sensitive electronic skins.In order to tackle such trade-off between sensitivity and linear range,herein,a hybrid piezoresistive-supercapacitive(HRSC)strategy is proposed via introducing a piezoresistive porous aerogel layer between the charge collecting electrodes and iontronic films of the pressure sensors.Surprisingly,the HRSC-induced impedance regulation and supercapacitive behavior contribute to significant mitigation in sensitivity attenuation,achieving high sensitivity across wide linear range(44.58 kPa^(−1)from 0 to 3 kPa and 23.6 kPa^(−1)from 3 to 12 kPa).The HRSC pressure sensor exhibits a low detection limit of 1 Pa,fast responsiveness(~130 ms),and excellent cycling stability,allowing to detect tiny pressure of air flow,finger bending,and human respiration.Meanwhile,the HRSC sensor exhibits exceptional perception capabilities for proximity and temperature,broadening its application scenarios in prosthetic perception and electronic skin.The proposed HRSC strategy may boost the ongoing research on structural design of high-performance and multimodal electronic sensors.展开更多
文摘A calibration test was done in order to measure its sensitivity coefficient by an improved soil test device.The experimental result shows that the soil pressure min-sensor made of the monocrystalline silicon（SPMMS）is proved to be good linear,high precision and less that can fetch precise data in low pressure range even near by O point,which guarantees the reliability of the soil pressure test in geotechnical engineering.
基金This work was financially supported by the funds of the National Natural Science Foundation of China(No.51903118 and U1613204)the Science Technology the Shenzhen Sci-Tech Fund(No.KYTDPT20181011104007)+2 种基金M.G.also thanks the support of“College Student’s Innovation and Entrepreneurship Program”(No.2018X33).Guangdong Provincial Key Laboratory Program(2021B1212040001)from the Department of Science and Technology of Guangdong Provincethe“Guangdong Innovative and Entrepreneurial Research Team Program”under contract no.2016ZT06G587the“Science Technology and Innovation Committee of Shenzhen Municipality”(Grant No.JCYJ20170817111714314).
文摘Flexible pressure sensors with high sensitivity are desired in the fields of electronic skins,human-machine interfaces,and health monitoring.Employing ionic soft materials with microstructured architectures in the functional layer is an effective way that can enhance the amplitude of capacitance signal due to generated electron double layer and thus improve the sensitivity of capacitive-type pressure sensors.However,the requirement of specific apparatus and the complex fabrication process to build such microstructures lead to high cost and low productivity.Here,we report a simple strategy that uses open-cell polyurethane foams with high porosity as a continuous three-dimensional network skeleton to load with ionic liquid in a one-step soak process,serving as the ionic layer in iontronic pressure sensors.The high porosity(95.4%) of PU-IL composite foam shows a pretty low Young's modulus of 3.4 kPa and good compressibility.A superhigh maximum sensitivity of 9,280 kPa^(-1) in the pressure regime and a high pressure resolution of 0.125% are observed in this foam-based pressure sensor.The device also exhibits remarkable mechanical stability over 5,000 compression-release or bending-release cycles.Such high porosity of composite structure provides a simple,cost-effective and scalable way to fabricate super sensitive pressure sensor,which has prominent capability in applications of water wave detection,underwater vibration sensing,and mechanical fault monitoring.
文摘Piezoresistive pressure sensors based on silicon have a large thermal drift because of their high sensitivity to temperature. The study of the effect of the temperature and doping level on characteristics of these sensors is essential to define the parameters that cause the output characteristics drift. In this study, we adopted the model of Kanda to determine the effect of the temperature and of doping level on the piezoresistivity of the Silicon monocrystal. This is to represent P(N,T) and for p-type silicon as functions of impurity concentration for different temperatures. This allows us to see the effect of temperature and doping concentration on the output characteristics of the sensor. Finally, we study the geometric influence parameters and doping on these characteristics to optimize the sensor performance. This study allows us to predict the sensor behavior against temperature and to minimize this effect by optimizing the doping concentration.
文摘We have proposed and demonstrated experimentally a novel and simple pressure sensor based on mechanically induced long period optical fiber gratings. We report here for the first time to our knowledge the characterization of mechanically induced long period fiber gratings in novel multimode-singlemode-multimode fiber structure. The MLPFG induced in single mode fiber and multimode fibers are studied separately and the results are compared with MLPFG induced in MSM fiber structure. MLPFG in MSM structure has much greater sensitivity. We have obtained maximum transmission loss peak of around 18 dB, and the sensitivity of pressure sensor is 8 dB/Kg.
文摘Spiky spherical nickel powder with sharp nano-tips on its surface is a kind of excellent fillers for developing pressure-sensitive cement-based composites/sensors for traffic detection,structural health monitoring,and border and military security.The sharp nano-tips on the surface of spiky spherical nickel particles can induce field emission and tunneling effects,which leads to the ultrahigh pressure-sensitive responses of the cement-based composites.In this paper,we systematically introduce research on nanotip-induced ultrahigh pressure-sensitive cement-based composites/sensors,with attentions to their pressure-sensitive property and sensing mechanism,pressure-sensitive characteristic model,and smart structure system for traffic detection.
基金the National Natural Science Foundation of China(Nos.62174068 and 61888102)Rizhao City Key Research and Development Program(No.2021ZDYF010102).
文摘Flexible pressure sensors capable of monitoring diverse physiological signals and body movements have garnered tremendous attention in wearable electronic devices.Thereinto,high constant sensitivity over a wide pressure range combined with breathability,biocompatibility,biodegradability is pivotal for manufacturing of reliable pressure sensors in practical sensing applications.In this work,inspired by the multilayered structure of skin epidermis,we propose and demonstrate a multi-attribute wearable piezoresistive pressure sensor consisting of multilayered gradient conductive poly(ε-caprolactone)nanofiber membranes composites.In response to externally applied pressure,a layer-by-layer current path is activated inside the multilayered membranes composites,leading to the most salient sensing performance of high constant sensitivity of 33.955 kPa^(−1) within the pressure range of 0–80 kPa.The proposed pressure sensor also exhibits a fast response–relaxation time,a low detection limit,excellent stability,which can be successfully used to measure human physiological signals.Lastly,an integrated sensor array system that can locate objects’positions is constructed and applied to simulate sitting posture monitoring.These results indicate that the proposed pressure sensor holds great potential in health monitoring and wearable electronic devices.
基金the National Natural Science Foundation of China(Nos.22104021,52303075,and 22309105)Natural Science Foundation of Shandong Province(No.ZR2023QB227)+1 种基金Department of Science and Technology of Guangdong Province(No.2022A1515110014)Taishan Young Scholar Program(Nos.tsqn202306267 and tsqnz20231235).
文摘The issue of sensitivity attenuation in high-pressure region has been a persistent concern for pressure-sensitive electronic skins.In order to tackle such trade-off between sensitivity and linear range,herein,a hybrid piezoresistive-supercapacitive(HRSC)strategy is proposed via introducing a piezoresistive porous aerogel layer between the charge collecting electrodes and iontronic films of the pressure sensors.Surprisingly,the HRSC-induced impedance regulation and supercapacitive behavior contribute to significant mitigation in sensitivity attenuation,achieving high sensitivity across wide linear range(44.58 kPa^(−1)from 0 to 3 kPa and 23.6 kPa^(−1)from 3 to 12 kPa).The HRSC pressure sensor exhibits a low detection limit of 1 Pa,fast responsiveness(~130 ms),and excellent cycling stability,allowing to detect tiny pressure of air flow,finger bending,and human respiration.Meanwhile,the HRSC sensor exhibits exceptional perception capabilities for proximity and temperature,broadening its application scenarios in prosthetic perception and electronic skin.The proposed HRSC strategy may boost the ongoing research on structural design of high-performance and multimodal electronic sensors.
